Pre-purchase: Processor and HD choices

I'm about to buy a new 15" MBP and am wondering if there's a significant difference between the 2.66GHz Intel Core 2 Duo and the 2.93 GHz. I do mostly text stuff, some photo work, and very occasionally some iMovie and GarageBand projects.
Also, is there a noticeable speed difference between the 320GB Serial ATA @5400 and the 320GB ATA @7200?
Where will the differences between these processor and HD choices most show up?

For the uses you describe, the main place you'd notice differences would be in video encoding (iMovie). The faster processor might shave 4-5 minutes off of a one-hour render. The faster HDD will also make a slight difference, but the density of today's larger capacity drives actually mean the rotation speed difference has less of an impact on performance (i.e. the benefit of going from 5400 to 7200 rpm is fairly noticeable with a 100 GB drive, less so with a 320 GB drive).
Bottom line, those two upgrades will provide minor but detectable performance improvements. Up to you to decide if the cost/benefit ratio works for you.
My opinion, for the uses you describe, the 2.66 GHz processor and the 5400 rpm drive will be fine.

Similar Messages

  • New MacBook Pro.  Tried to reinstall pre-purchased Dreamweaver and installation failed...three times.  followed directions

    trouble re-installing Dreamweaver in brand new MacBook Pro where I cloned it from the previous MacBook Pro.  From Adobe website tried to re-install software and it failed.  Followed all directions.
    help?

    Which ver of DW?
    Which OS?
    Nancy O.

  • Locked out of pre purchased downloads

    No where in the agreement does it state that I have to have money in my account in order to recieve pre-purchase books and tv programs from iTunes.
    I paid for books via Audible.com but when I went to download them Itunes stated there was a problem with my credit card.  But I paid for the Audible books a number of months ago, and I also paid for the season passes on my itunes.  It is paid for!  I looked up the iTunes agreement and nothing in it states that all purchase items are ransomed until my credit card is available.
    Hello what is this!!!!

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store. Note, however, that you aren't normally charged for a pre-order until the item is actually available, so if these pre-orders just now became available, that may be why you are now encountering difficulties if your card is no longer valid.
    Regards.

  • Not compatible with OS X 10.5.8 on pre-Intel processor

    I downloaded Firefox and when I tried to open it a message said it was not compatible with this architecture. I am running on a Mac mini with a pre-Intel processor and OS X10.5.8

    Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/<br />
    http://tenfourfox.blogspot.com/ <br />
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  • Pre-purchase Q's - Pagemaker features and font "problems"

    I am running a PB G4 17" 1.5 gig memory with B/W Postscript printers and a Brother Inkjet. I have not purchased Pages but i have been following this forum for several days.
    Two pre-purchase questions.
    I have used Pagemaker for a long, long time (my serial number is 02-201-xxxxx) going back to Mac SE's and II ci's. Pagemaker 7 will not run under 10.4.x even in classic (believe me I've tried, Adobe has tried and Apple has tried - but no luck). It will run classic under 10.3.x but I've come to the conclusion that it just ain't worth having a seperate FW start-up disk just for a decades old product.
    I used Pagemaker primarily for marketing material, white papers, proposals and other documents that are mainly text with a few charts, graphs, callouts and some simple graphics. Some of the things that I liked was the "master" page concept (that is you could format and place text/objects on the master pages and they would appear on every page), that I had complete control of how the text "flowed" on a page (over, around, through and even over a graphic if I wasn't careful), and that I could "write" different parts of the document in a word processor and then "import" the text into Pagemaker making it flow wherever I wanted, even over multiple, non-contiguous pages.
    Can I do this with Pages?
    Second, since I've never used Pages i am not sure what the font/WYSIWYG discussions are all about. It seems that Pages does not display the text in the font/size/style selected. Am I correct or am I missing something?
    Thank you

    Hullo Pachyx:
    To answer your last question first, I've been tempted to reply "OMG not this again!" to those who beat this old drum. It's a preconception from Appleworks and other programs, that you have to be able to run up all your fonts with the font name as a sample. Actually you can do this in Pages by piling all your fonts into a "favourites" collection; but frankly, why would you bother? Merely the font name is hardly sufficient sample to judge a font's usefulness, and if you're using fonts with any appreciation, you should really spend some time acquainting yourself with what you have before churning out fancified guff in them.
    Sorry if you're of that ilk, but Pages does serious typography. Your access to fonts is - quickly, in actual use - via the Mac OsX font panel, immediately accessible from your tool bar or from Format / Font / Show Fonts in the menu. This does have the option to view a small sample of any selected font, but more importantly has an option in the cog-wheel box at the bottom right hand corner of it to "Manage Fonts." This brings up the Font Book, which has options to display an alpha-numeric sample of your font in any size you choose, the complete repertoire of your font to see all characters it has, or a custom option into which you can enter any text you choose to give a good view of your font in use: Like Ipso Lorum, or Caesar ad sum iam for te, whatever you prefer. There is also an option to view font info, and again you can bring up an alpha-numeric sample of reasonable, but not selectable, size by just double clicking on the font in Font Book; and there are other options back in the font panel to access any special features of the font, such as ligatures or alternative glyphs.
    So anything you've heard about font deficiencies in Pages is nonsense. And Pages represents your typography, with all the right kerning details & etc on screen, as all too many programs don't. It takes a bit of detailed work, but you can also perform proper "leading" and kerning adjustment from the facilities that Pages provides. You've used what was a serious layout and publication program in Pagemaker. Pages is a new and worthy iteration of the same - for all the niggles you'll hear, that are endemic to software anyway.
    So now to your first question. Of course it won't be easy to switch from anything you probably know like the back of your own hand. But you can, and the formula for success in this is to approach the new program afresh and on its own merits, and not befuddle your understanding of it with expectations of more of the same that you're used to. Pages provides many templates that may be useful on occasion, but might also primarily suggest the scope of what Pages can do. Once you've got the picture, and explored the menus, inspector panels and help, you'll find that the blank template will allow you a freedom that I doubt you'd find excelled much anywhere else at all.
    As to the detail of that question. The answer really is that, although you will need to find new methods to do the same, you will find them readily enough to hand. I'd be inclined to recommend, though, that you first try these with new material, since reformatting a mixture of old and new will naturally enough require some fluency in the new environment to understand at a glance what needs to be done, and to recognise how to do it.
    That said, it's a curiously sometimes intuitive, and at others an inscrutable interface. Do spend some time to savvy it before you begin to commit any serious project to it. Pages does to an extent rely on your setting up a basic page layout and other details from the outset. On the other hand, it does have a powerful "undo" facility, so there's no need to be afraid of messing about with it - which will generally show you more than all the help and manuals, and even overall these forums, which are really a consensus of our meddling with it too. It's also a program in its youth, and will ask you for some indulgence: and as yet the odd workaround you shouldn't really need.
    But we don't all persevere with it for nothing. At root and core it's a beauty.
    Cheers.

  • I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling I must authorize this computer before it play pre purchased music. how do I authorize my computer.

    I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling me I must authorize this computer before it can play pre purchased music. how do I authorize my computer to play this music?
    Thank you for any assistance.

    Tigon's already got you covered here. But I'll chime in with some English localisation advice.
    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • HT201272 I pre ordered Avicii's album, it says purchased but not showing up in my purchased folder and not allowing me to download. Just says purchased

    As I said I pre-ordered the album, however I had already bought the two songs (Wake Me Up and You Make Me).When the preorder went through in the first place, it was not showing up as a download, it showed up as an iCloud download. I thought it was weird however I still went forward and downloaded it. Wasn't a huge deal but the two singles werent showing up as part of the album, they were the singles. That bugged me so I thought deleting them all and re downloading them would work and I would have the whole album instead of a part album and two singles. However, now in iTunes it says that the album (True) is purchased and there is no way of re-downloading. It is not showing up as a purchase anywhere else though... I've gone to the iTunes front page, went to the purchased tabs and it says the last purchased song was "Skip to the Good Bit" by Rizzle Kicks (good song btw). On my iPod there it is not in recently listened to or added< almost no record that I've bought these songs. I would even re-purchase. I wouldn't entirely want to, but thats not even an option...

    Hi there MeganElizabeth02061999,
    You may want to check your past purchases and see if you can find the tracks there. Take a look at the article below for more information.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    -Griff W.

  • Problem updating pre-installed iPhoto and iMovie "to update this application, sign into the account you used to purchase it"

    My dad bought a new retina macbook pro over a year ago.
    The pre-installed iPhoto and iMovie applicaitons get this error when trying to download an update:
    "to update this application, sign into the account you used to purchase it"
    We are logged into the only account that he has ever had.
    He has mountain lion. 
    It's very annoying and there's no way we know of to get around it. Searching and searching online led nowhere.
    Please help!!!!!

    You cannot.
    As requested... You need to use the SAME Apple ID that Originally made the Purchase of whatever Application you are trying to Update.

  • Pre-order purchased but not downloaded; no pre-order email and purchases not on cloud. Help?

    I purchased a pre-order for an album back in September, with a release date of Oct. 29. On Oct. 29, the album was displayed as "purchased" on the iTunes Store yet it did not download. I did not receive a pre-order email and the purchase was not on the cloud.

    I have the same problem :(
    Really wish someone would help

  • HT4059 I pre purchased a book and now it won't let me open it to read.  It say paused.  I know it is available to read. Please advise.

    I pre purchased a book from I books. I cannot open it to read.  It is available to read on amazon and is published. It say paused in my library. When I try to open it says go to purchases and download. When I go to store to purchase it says already purchased.

    You are reading on your ipad?
    or your computer?
    Ibooks are only for the ipad/iphone/ipod touch

  • I purchased snow leopard and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update.  It restarts but doesn't update after disk installs

    I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8.  It restarts but doesn't update after disk installs.  Do I need 10.6.0 to install first? 

    Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.

  • HT1918 I've canceled the billing info, got an app store pre paid card and still can't download any apps! Free nor purchasing! Hel

    I've canceled the billing info, got an app store pre paid card and still can't download any apps! Free nor purchasing! Help!!

    If you're in the USA, it would be hard to zero balance a gift card just with purchases as there are sales taxes in most areas that you don't know the amount of until the purchase is complete. My guess is that the issue is with the last purchase, there wasn't enough credit left on the card to cover the sales tax.
    Contact Mac App Store Supprt to find out the details'
    Mac App Store Support -
    http://www.apple.com/support/mac/app-store/

  • I have just pre-purchased the Iphone 5 and am concerned about the Nano_SIM. I am with Telstra in Australia. How and where do I get a Nano M and how do I get my pre-paid account  onto the new SIM?

    I have just pre-purchased the Iphone 5 and am concerned about the Nano_SIM. I am with Telstra in Australia. How and where do I get a Nano M and how do I get my pre-paid account  onto the new SIM?

    The nano SIM should come with the phone if you set it up with a carrier.
    If you purchased an unlocked phone, you'll have to contact your carrier to get a nano sim card.

  • I recently Pre-orderd "Yours Truly" And it came out at midnight. As I check it i noticed every song says "Purchased''. And i just waited for the album to be avilable. But i accedenly clicked Cancel Pre-Order and now it say I need to "Complete Album" Help

    I Need help, I bought the whole album for 7.99 and i only got 1 song. (it was the Pre-order.)
    and i dont want to pay extra for 6.53$
    I need help
    P.S
    i got the email but nothing would pop up.

    Contact iTunes
    Apple - Support - iTunes - Contact Us

  • TS1702 I couldn't download a pre-purchased album, so I cancelded the order hoping I could just buy the album. Now it says that I've purchased all of the songs and I can't find them anywhere. My account was never charged either. Please help!

    I have looked everywhere in my iTunes for this and I simply can't find them. It says that I have already purchased them, but I haven't. Please help, I have waited a long time to be able to use iTunes again.

    Hi M.B.13,
    Welcome to the Support Communities!
    If you have a computer, you can view your iTunes Store account and request assistance by following the instructions below:
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/ht2727
    I hope this information helps …. 
    - Judy

Maybe you are looking for

  • Lenovo SK-8825 (L) Keyboard - can't figure out how to use rupees symbol

    I am using lenovo SK-8821 SLIM KEYBOARD where I didnt find right click key, due to that i am unable to use the same frequently request you to please provide any updats against the same Regards  Tushar Moderator edit: Tidied up subject.

  • Topics with ampersands (&) show up as question marks (?) inside Help's Search tab

    See the attached image. In the image: Item A shows the Topic Title inside RH. Item B shows what I'm typing in the Search tab of the HTML Help file. (I'm typing "GD&T"). Item C shows the list results. Notice that when I type "GD&T" in the search tab,

  • The performance of TransparentLoad

    On usermanaged cache group, I use the query of 'select * from table where keyvalue=?'     to transparentLoad into TT 1M rows from Oracle database. It costs 852s. Even when I set Logging=0,DurableCommits=0,LockLevel=1 for the data store, It still cost

  • Spool request not created in background.....

    Hi Experts, I have executed one report in background in sduser but it has not generated a spool request in sp01. There is no authorisation for sm37 to this user. In abapuser user it is generating a spool request when i checked in sp01 but not in sdus

  • Defining default action in the pop ups declaratively.

    Is there a way to decoratively define the default action in the pop up? My requirement is that, I have a pop up dialog with two buttons 'ok' and 'cancel', and I would like to execute OK action when user press the Enter key in the dialog. Thanks.