Pre time stops "working" when screen dims/locks

the time on my pre stops "working" when the screen dims/turns off - what i mean by this is that when I wake up the phone the "old" time (time that i last had the phone awake) displays and then quickly updates to the current time.
The worst part about this is that alarms will not work because it does not know the real time when the screen is off!!
If the phone is on the touchstone everything works fine
can anyone help!!!?
thanks, Gavin
Post relates to: Pre p100eww (Sprint)

Hello Gavin and welcome to the Palm forums.
 What trouble shooting steps have you tried so far?  Have you tried restarting the phone?  Reloading webOS using the webOS Doctor tool?
Alan G

Similar Messages

  • Adobe reader XI stops working when activated, and locks up my shockwave plugins

    Does anyone know why Reader XI locks up when opening the program or any file.
    What's worse, is when I install Reader, even from an upgrade/update, my shockwave plugins on my browsers, all of them (IE, Chrome, Mozilla, etc.) stop working correctly.  It requires a full uninstall of the program to get shockwave working correctly again.
    I know Reader XI is supposed to be more compatible with shockwave, but this isn't working right on my computer.  I've tried plenty of advice from other forums first, but this is the last staw.  I would like to have Reader, but will settle for an older version if I can get one.
    Any suggestions?  Or is this program a lost cause?

    *Chrome v38.0.2125.104m; runs Adobe Flash Player - Version: 15.0.0.189
    Some video will run for a few seconds, then stop.  Actually loads video from the main site page, but hangs and never plays video in youtube. Then when trying to load random vids, the commercial freezes and the vid never plays.
    I have IE v.11.0.9600.17351 
    *IE 11: http://www.adobe.com/software/flash/about/
    when I run the online test to check the player, it says, You have version 15,0,0,189 installed; runs the animation correctly.
    https://www.adobe.com/shockwave/welcome/
    This Test Adobe Shockwave Player does not run. Either in chrome or IE11.   IE11 shows an icon for 12.1.3r153 and says installation complete, but no animation.
    *I also have the progam, Flash professional CS6; v.12.0.2.529; and this shouldn't be causing any problems since the problem is primarily with Reader and my browser plugins.
    *Adobe Application manager started updating after encountering problems.  Then ran to completion and restarted. 
    However, after the restart, with Reader XI was still installed, and the youtube videos and ad’s play just fine.
    But with another restart, the reader XI is showing installed through the control panel/programs/ programs and features, but when I search for the program it does not list in the search.
    So I have to go to the c:/program files (x86)/adobe/reader 11.0/reader/acrord32.exe.  It still loads the program, then locks/freezes into “not responding.” 
    And now that I’ve tried to use the Reader XI program, youtube videos or ads won’t respond again. News sites, with adobe shockwave player won’t run in IE 11 and hangs with site not responding.  Chrome, youtube ads run, but the video hangs/stops after a second of loading.  Chrome news sites show shockwave flash plugin isn’t responding, then goes to a message for Page(s) unresponsive. In which case I have to kill the page to get the “he’s dead, jim!” message… either chrome ran out of memory or was terminated for some other reason… option/reload. And I get the option to stop the shockwave plug-in.  When I stop the plugin and reload the news page, then it starts all over again with page unresponsive….
    Mozilla, same thing with youtube, I can link to a channel, then the vid loads, but hangs/freezes after a second. This program does not show the ad at the top of the main youtube page, so I can’t test that. But when I link to random vids, the option to install the plugin needed to display the media for the page is available, and it wants to install… flash.
    I tried to install and got the “no plugins were installed.” For Adobe Flash Player – not available – manual install required.  Which the manual option takes me to the get.adobe.com/flashplayer  page for Adobe flash player v15.0.0.189.  Which I know I already have. But I run it anyway.  I run the adobe flash player installer exe file, and after completion, I go to the adobe.com/software/flash/about  and get the repeat to install flash again.
    So once again, I’ve run the circle back to itself to find that when Adobe Reader XI is installed, I can’t play adobe shockwave browser plugin content.  Nor can I run Adobe flash player content through the browsers. All three that I tested, because I don’t want to test it with the other three I have available.
    But I did get this new message from youtube after trying to run a random vid.  “shockwave flash may be busy, or it may have stopped responding…” There was more, but the Mozilla browser shut down automatically while I was typing this so I couldn’t finish the message.
    When I tried to restart Firefox, I got “firefox is already running, but is not responding.  To open a new window, you must first close the existing Firefox process, or restart your system.”
    And of course, task manager showed that Firefox was not actually running. So I will have to restart my system.
    I will uninstall Reader XI one more time, and check to see if these programs work again.
    After uninstall, the browsers began working videos and ads again, with the except of a news page in both firefox and chrome, which adobe flash shockwave plugin still isn’t running correctly with these two browsers. So that begins a new question about Shockwave player plugins and compatibility with Adobe Reader.  Since Shockwave isn’t working correctly anyway, I’m going to assume this might be the problem with Adobe Reader.  It's why I started trying to learn why my browsers wouldn't play shockwave content to begin with.  But the Reader and Shockwave plugins are clearly incompatible.
    I have not yet tried to uninstall Kaspersky, but will try that later today. 

  • I have ipad 2. Safari stopped working. Screen appears with light gray cover. Some websites show errors when debug is on. But how actually can I debug or fix it? Thank you.

    I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
    But how actually can I debug or fix it? Thank you.

    Here are a couple suggestions:
    1.  Go into Settings > Safari and Clear Cookies Clear Cache
    2.  Fully close Safari:  from your home screen, double tap your home button and the most recently used Apps will show up.  Hold your finger on the Safari App until all Apps start jiggling.  You'll see a minus sign on the upper left side of Safari.  Touch the minus and Safari will fully close.  Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
    3.  Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
    After iPad comes back up, try Safari again, and you should be good to go.

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi，
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

    I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

    See these threads for some possible solutions:
    Bluetooth and 10.7
    Bluetooth speaker error

  • My note 3 S Voice stop working when the screen is black

    My note 3 S Voice stop working when the screen is black

        mr1bunny,
    Sorry to hear that you have had trouble with the S Voice app. When did the trouble begin? Any recent changes to the phone that correspond with it working when the screen is black? Go to the S Voice application -> Menu -> Settings -> Is the "Voice wake-up" turned on?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Why is the Time Machine icon in menu bar not spinning when backing up? It stop working when I changed to Maverick.

    Why is the Time Machine icon in menu bar not spinning when backing up? It stop working when I changed to Maverick.

    my imac came with lion and don't think it ever span with lion and mtn lion and now maverick not sure if it's a setting

  • Project stops working when attempting to change working times

    Project stops working when attempting to change working times.  I'm running a 1000+ task project, fully resource loaded with multiple resource calendars.  After two months of normal operation, it now appears that Project has deleted (or corrupted)
    one of the base calendars that several of the resources use.  Now, when attempting to change working time for a resource, sometimes I can get as far as a blank space where the base calendar name should be and an error message stating that there is a problem
    with the resource; other times the program just stops working and shuts down.  Any ideas on how to restore the file?  

    I agree with John. Save the file as XML and reopen it. Also, if you have backup of the file, use Organizer to copy the base calendar from the backup. To use organizer, open both the files in Project.
    1. In Project 2007 or earlier versions, select Tools > Organizer. In Project 2010 and later, select File, Info > Organizer. 
    2. Click Calendars tab.
    3. Change the Calendars available in: drop down on the right to current file, and other drop down to backup. This will list all the base calendars in each file.
    4. Select the base calendar in the backup. Click the "Copy >>" to restore the base calendar.
    Sai PMP, PMI-SP, MCTS Project, MVP Project

  • Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

    I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
    I hope someone can help me with this as I cannot work on any projects.
    thanks.

    Hi john,
    thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
    As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
    This is the info that appears on the screen
    I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
    Thanks for your help and patience.
    Arantza
    Date: Mon, 23 Apr 2012 09:12:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
        created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Helix keyboard stops working when dock battery reaches 3%

    My other post has more details but the title says it all. My Helix keyboard stops working when dock battery reaches 3% even though the tablet battery has a charge. This seems to happen every time. A hard reset of the dock gets the keyboard working again. Any ideas on how to fix this?

    This is my daughter's college computer so I have not used it. I just get the panic call when it locks up.
    Is there any way to get a warning when the battery is low? I assume that it has a light on the base but I can see how she could miss it when focused on what she is doing. I am not sure it comes on since the tablet battery still has capacity. I find it odd that this happens when the tablet battery still has a decent amount of charge. Effectively it eliminates a fair amount of the battery capacity available for the computer.
    I have other electronics that force you to shut done at low battery levels. I am surprise that a high end laptop performs this way.

  • AirPlay mirror on Apple TV stops working when a Skype or Google conversation is started (iOS 7)

    I thought it would be nice to see Skype contacts on the large screen and realised this should be possible using my Apple TV, but AirPlay (in mirror mode) on Apple TV stops working when a Skype or Google + conversation is started after showing all right on the TV till that point. I'm using iOS 7 and the problem occurs on my iPad 2 and iPhone 5. Facetime seems to be OK, and Skype works over Apple TV when using my daughter's MacBook Pro (though I haven't tried Google + on it), so I deduce that the issue is with iOS 7. I have had success one or twice with using Skype in this manner on my iPhone so it is not consistant, but this is rare and hasn't happened in my latest attempts. Unfortunately some of my Skype contacts don't have an Apple device so I often can't use Facetime.
    Is there a work around, or has Apple acknowledged this issue and said there will be a fix?

    Same problem here.
    iPhone 5s + apple TV + Skype all are up to date. Mirroring is working until the video signal starts, after that the Apple TV goes back to the Apple TV starting screen.

  • External speakers stopped working when Yosemiti was down loaded

    My external speakers stopped working when I downloaded Yosemiti! how can I remedy this?

    Dunno what it has to do with Yosemite, but:  press the alt/option key, while clicking on the speaker icon at the right hand top of your screen. This will show you all the sound inputs and outputs for your mac. Ensure that it is set to "Line Out" or "Digital out" (depending on your speaker's capabilities. Hopefully
    that works
    John B

  • Itunes stops working when copying apps during Sync

    Hi I am using Itunes 12.01.26 on a Windows 7 PC
    My library is saved on a nas server and the network drive is mapped.
    I have an ipod 5 and Iphone 5s
    Up until october this configuration has works a treat however since about October I have had difficulting in Syncing.
    I cannot sync my music  - everything i try fails so as a last resort i have tried to restore my devices.
    Itunes stops working when it gets to the stage of copying the apps.
    I have read a suggested solution to move the library to the local C drive but this does not seem to be reasonable solution particularly as my library is large.

    Same problem here with Win 7 64 bit & iphone 4.  It all started a few weeks ago with itunes upgrade 10.4.8.   After about 20 hours wasted time, uninstalling and re-insstalling all Apple products in the suggested order as suggested on another forum.  Still had the same problem.  Will sync fine until I check the "videos" tic box.  Itunes stops working in the step of "optimizing photos" (????).  If I go back and uncheck "videos" tic box, iphone4 will sync just fine.  BUT now all my videos previously on my iphone are on the PC.  I would like them back on my phone! 
    I gave up and went to the Apple Store to visit with a Genius.  Took my PC and everything with me.  It was not from lack of trying, she did all the same stuff I did and checked everything over.  Could not fix it.  She said it appeared everything on my PC was set corrrectly and the problem was probably with itunes.  Said she always waits a little while when updates come out to make sure there are not bugs before putting them on her stuff.  Lesson learned.
    I hope with Steve Jobs gone, this is not the future of Apple

  • Itunes stops working when I try to upload CD

    Itunes stops working when I go to type in info on audio cd file prior to download

    Ah... interesting. I do have errors in the event log for the Bonjour service for all of the times that I have tried to connect (8 for every time I try to connect). They are on the Vista machine and it says : XXX: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    The XXX is different number for each of the 8 and includes: 488, 480,476, 472, 468, 464, 460, and 452.
    It also has an application error for itunes:
    Faulting application iTunes.exe, version 9.2.1.5, time stamp 0x4c47745b, faulting module iTunes.dll, version 9.2.1.5, time stamp 0x4c477437, exception code 0xc0000005, fault offset 0x0040efa0, process id 0x12b0, application start time 0x01cb2f69002ea6c0.
    So I tried to restart and start Bonjour and that didn't help. I have rebooted and that didn't help either.

  • Error "Licensing for this product has stopped working" when you launch Acrobat 9

    Hi,
    I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
    Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.

    Wow,
    I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
    I reinstalled both from the "original media" (dmg's)  with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
    I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted.

Maybe you are looking for