Preferences will not open??

preferences will not open from within the address book. I did a restart on the macbook but still wont open. any ideas?

SamRH,
Quit Address Book, and locate the com.apple.AddressBook.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Drag the file to your Desktop, log out/in or restart and check for the availability of Address Book Preferences.
Let us know what happens.
;~)

Similar Messages

System preferences will not open after upgrade

upgraded software today and now system preferences will not open. when i click on it a message says "you cannot open the application 'system preferences' because it is not supported on this architecture". system preferences icon has a circle and slash symbol on top of it. my imac is about 6 months old and have not had a problem with it. all other apps work. please help.
lennyg2
iMac dual core Mac OS X (10.4.7)
iMac dual core Mac OS X (10.4.7)

Tried that, did 'repair disk permissions and it said all was ok. But when I pressed the 'Verify permissions' button it came out with an error message. Said that there was an error upon exiting, said the hard drive was damaged. Do you think that is connected to 'system preferences' not opening. As I said the 'system now has a 'circle with a slash' symbolon top of it.

System preferences will not open after Yosemite 10.10.2 upgrade

system preferences will not open after Yosemite 10.10.2 upgrade. What should I do?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My system preferences will not open!

i have a Mac Mini and 10.6.8 and my system preferences will not open how do i solve this?

What happens when you try?
Try booting to Safe Mode
OS X: What is Safe Boot, Safe Mode?
After your try, open the Console app in the Utilities folder and at the time you tried look for log entry errors associated with the opening System Preferences and post them here.

Odd bug: "keyboard and mouse" within "system preferences" will not open!!

After having to Archive and Re-Install yesterday and installing "X11", I have an odd problem:
- apple+i leads to crashing and restart of "Finder"
- when investigating this I found the "keyboard and mouse" registry in "system preferences" will not open.
Any ideas what could be wrong?
Is there any other remedy short of another Archive and Re-Install?
In the system library I have "Keyboard.prefPane" version 3.13. Clicking on it opens a blank "system preferences" page entitled "keyboard and mouse".
Your help would be greatly appreciated!
PowerBook G4 1.25 GHz Mac OS X (10.4.9)

Reinstallation solved the problem.

My preferences will not open from the apple menu.

My preferences will not open from the apple menu. Time machine will not open either. I've tried reinstalling Lion, to no avail. Has anyone else had this problem?

I have exactly the same issue. After FF upgraded on its own to version 5, it won't open from start menu, taskbar, desktop icon, or even by pressing firefox.exe in program files directory. It does so by pressing a link at msn messenger, inside Outlook etc.
Disabling all addons, didn't help. Moreover, I can't start FF in safe mode or start profile manager (Start > Run> firefox.exe -ProfileManager).
OS: Windows 7 64bit
Windows Event Viewer entry details:
Faulting application name: firefox.exe, version: 5.0.0.4183, time stamp: 0x4df95302
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8c724fa6
Faulting process id: 0xc0c
Faulting application start time: 0x01cc37fe2fae7e8b
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: 6e7f03eb-a3f1-11e0-8f4d-a4badb0238f6

System Preferences will not open 10.10

After having some amusing issues with 10.10.1, one issue being that System Prefs wouldn't open, I decided to restore the system back to 10.10. Though I can't say yet that this has fixed all my problems, one glaring issue persists: System Preferences will not open. The icon in the dock will bounce for a good minute and "System Preferences" will show up in the upper menu bar, but the actual panel will never load up and the icon (upon right clicking on it) will eventually say "app not responding."
All in all:
I can access System Prefs in safe mode. I have attempted to remove systempreferences.plist. Nothing seems to show up in the console when attempting to boot System Prefs up (besides an excessively long hang report). I have repaired disk permissions. I have no idea when this started. Mac Pro (Early 2009). Am willing to do any and all of these things again.

Start time: 16:29:30 12/19/14
Model Identifier: MacPro4,1
System Version: OS X 10.10 (14A389)
Kernel Version: Darwin 14.0.0
Time since boot: 3 minutes
SATA
   Hitachi HDE721010SLA330
USB
   FCR-HS215/1 (ATECH FLASH TECHNOLOGY)
   USB Receiver (Logitech Inc.)
   EPSON Scanner (Seiko Epson Corp.)
Diagnostic reports
   2014-12-19 Adobe Photoshop CS5 crash x2
   2014-12-19 Finder crash x3
   2014-12-19 System Preferences hang x3
   2014-12-19 Terminal hang x2
   2014-12-19 garcon crash x4
Log
   Dec 19 16:11:34 REQUIRE_NO_ERR failure: 0x10 - file: /SourceCache/IOBluetoothFamily_kexts/IOBluetoothFamily-4300.4.10/Core/Family/HC I/IOBluetoothFamily.cpp:26682
   Dec 19 16:11:34 **** [IOBluetoothHCIController][SetupBroadcomHardware] -- disableHIDEmulation() failed -- result = 0xE00002BC (kIOReturnError) -- retry 1 time(s) -- 0xe800 ****
   Dec 19 16:11:34 [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- exit; error = 0x0000 (kIOReturnSuccess)
   Dec 19 16:11:58 com.apple.CSConfigDotMacCert-EMAIL-SharedServices: Service setup event to handle failure and will not launch until it fires.
   Dec 19 16:15:32 com.valvesoftware.steam.19060: Service exited with abnormal code: 1
   Dec 19 16:22:36 com.wacom.Wacom_TouchDriver.52856: Service exited with abnormal code: 1
   Dec 19 16:26:51 Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/Hitachi HDE721010SLA330 Media/IOGUIDPartitionScheme/Customer@2
   Dec 19 16:26:51 jnl: b(1, 2): replay_journal: from: 29366272 to: 41797120 (joffset 0x1d18000)
   Dec 19 16:26:51 jnl: b(1, 2): journal replay done.
   Dec 19 16:26:57 ** Device in slot: SLOT-1 **
   Dec 19 16:27:06 0x1face001, 0x00000000 Intel82574L::timeoutOccurred - no link - reset the chipset once
   Dec 19 16:27:07 **** [IOBluetoothHCIController][SetupBroadcomHardware] -- disableHIDEmulation() failed -- result = 0x0010 (kBluetoothHCIErrorHostTimeout) -- retry 1 time(s) -- 0x9800 ****
   Dec 19 16:27:13 com.apple.xpc.launchd.domain.user.200: Caller specified a plist with bad ownership/permissions: path = /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist, caller = softwareupdated.155
   Dec 19 16:27:13 com.apple.xpc.launchd.domain.user.200: Failed to bootstrap path: path = /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist, error = 122: Path had bad ownership/permissions
   Dec 19 16:27:14 com.apple.xpc.launchd.domain.user.loginwindow.66.4294967295: Could not import service from caller: caller = WacomTabletDriv.171, service = com.wacom.Wacom_TouchDriver.86936, error = 134: Service cannot load in requested session
   Dec 19 16:27:14 com.apple.xpc.launchd.domain.user.loginwindow.66.4294967295: Could not import service from caller: caller = WacomTabletDriv.171, service = com.wacom.TabletDriver.169296, error = 134: Service cannot load in requested session
   Dec 19 16:27:16 com.apple.xpc.launchd.domain.user.55: Caller specified a plist with bad ownership/permissions: path = /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist, caller = appleeventsd.24
   Dec 19 16:27:16 com.apple.xpc.launchd.domain.user.55: Failed to bootstrap path: path = /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist, error = 122: Path had bad ownership/permissions
   Dec 19 16:27:17 **** [IOBluetoothHCIController][SetupBroadcomHardware] -- disableHIDEmulation() failed -- result = 0x0010 (kBluetoothHCIErrorHostTimeout) -- retry 2 time(s) -- 0x9800 ****
   Dec 19 16:27:27 [IOBluetoothHCIController][hardwareSetupComplete] Failed setup: 0x0010 (kBluetoothHCIErrorHostTimeout)
   Dec 19 16:27:27 REQUIRE_NO_ERR failure: 0x10 - file: /SourceCache/IOBluetoothFamily_kexts/IOBluetoothFamily-4300.4.10/Core/Family/HC I/IOBluetoothFamily.cpp:26682
   Dec 19 16:27:27 **** [IOBluetoothHCIController][SetupBroadcomHardware] -- disableHIDEmulation() failed -- result = 0xE00002BC (kIOReturnError) -- retry 1 time(s) -- 0x9800 ****
   Dec 19 16:27:27 [IOBluetoothHostControllerUSBTransport][ReEnumerateOrReset] -- exit; error = 0x0000 (kIOReturnSuccess)
   Dec 19 16:27:50 com.apple.CSConfigDotMacCert-EMAIL-SharedServices: Service setup event to handle failure and will not launch until it fires.
   Dec 19 16:27:54 com.valvesoftware.steam.19060: Service exited with abnormal code: 7
Daemons
   com.adobe.versioncueCS3
   com.mice.360Daemon
   com.apple.installer.osmessagetracing
   com.oracle.java.Helper-Tool
   com.adobe.SwitchBoard
   com.adobe.fpsaud
Agents
   com.epson.scanner.ica.19628.UUID
   com.apple.CSConfigDotMacCert-EMAIL-SharedServices
   com.wacom.wacomtablet
   com.valvesoftware.steamclean
   com.valvesoftware.steam.ipctool
   com.adobe.CS5ServiceManager
   com.oracle.java.Java-Updater
   com.adobe.ARM.UUID
   com.apple.AirPortBaseStationAgent
Bundles
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/TabletDriverCFPlugin.bundle
   - N/A
   /System/Library/Extensions/Wacom Tablet.kext
   - com.wacom.kext.wacomtablet
   /System/Library/Extensions/Wireless360Controller.kext
   - com.mice.driver.Wireless360Controller
   /System/Library/Extensions/WirelessGamingReceiver.kext
   - com.mice.driver.WirelessGamingReceiver
   /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
   - net.telestream.wmv.import
   /Library/Internet Plug-Ins/AdobePDFViewer.plugin
   - com.adobe.acrobat.pdfviewer
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
   - net.telestream.wmv.plugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/Internet Plug-Ins/Unity Web Player.plugin
   - com.unity.UnityWebPlayer
   /Library/Internet Plug-Ins/WacomNetscape.plugin
   - com.wacom.tabletplugin
   /Library/Internet Plug-Ins/WacomTabletPlugin.plugin
   - com.WacomTabletPluginLib.WacomTabletPlugin
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/Flip4Mac WMV.prefPane
   - net.telestream.wmv.prefpane
   /Library/PreferencePanes/Growl.prefPane
   - com.growl.prefpanel
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/VersionCueCS3.prefPane
   - com.adobe.versioncueCS3.VCPrefPane
   /Library/QuickTime/Flip4Mac WMV Advanced.component
   - net.telestream.wmv.advanced
   /Library/QuickTime/Flip4Mac WMV Export.component
   - net.telestream.wmv.export
   /Library/QuickTime/Flip4Mac WMV Import.component
   - net.telestream.wmv.import
   /Library/QuickTime/FLV.component
   - com.macromedia.FLVExporter
   /Library/QuickTime/FLV.component/Contents/Resources
   - com.macromedia.FLVExporter
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Widgets/HP Ink Widget.wdgt
   - com.hp.widget.inkwidget
   Library/Widgets/iStat Pro.wdgt
   - com.iSlayer.iStatpro4.widget
dylibs
   /usr/lib/liblightscribe.1.dylib
Frameworks
   /Library/Application Support/Adobe/APE/3.1/adbeapecore.framework
   - com.adobe.ape
   /Library/Application Support/Adobe/Adobe Anchor Service/adobelm_service_installer.framework
   - com.adobe.adobelm_service_installer.framework
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.0.0/VersionCue.framework
   - com.adobe.versioncue
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.0.0/VersionCueSDK.framework
   - com.adobe.versioncuesdk
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.0.0/VersionCueUI.framework
   - com.adobe.versioncueui
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.1.0/VersionCue.framework
   - com.adobe.versioncue
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.1.0/VersionCueSDK.framework
   - com.adobe.versioncuesdk
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.1.0/VersionCueUI.framework
   - com.adobe.versioncueui
   /Library/Application Support/Adobe/Adobe Version Cue CS3/Server/plugins/com.adobe.versioncue.nativecomm_3.1.0/native/macosx/VCNative Comm.framework
   - com.adobe.versioncue.VCNativeComm
   /Library/Application Support/Adobe/Bridge CS5 Extensions/Adobe Output Module/contactsheet/resources/plugins/PDFGenerator.framework
   - com.apple.carbonframeworktemplate
   /Library/Application Support/Adobe/HIL Help Search/Frameworks/ahclient.framework
   - com.adobe.ahclientframework
   /Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/UpdaterInventory.framework
   - com.adobe.AAM.AdobeUpdaterInventoryFramework
   /Library/Application Support/Adobe/OOBE/PDApp/LWA/amtservices.framework
   - com.adobe.amt.services
   /Library/Application Support/Adobe/OOBE/PDApp/LWA/asneu.framework
   - com.adobe.asneu.framework
   /Library/Application Support/Adobe/OOBE/PDApp/UWA/LogSession.framework
   - com.adobe.headlights.LogSessionFramework
   /Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterCore.framework
   - com.adobe.AAM.AdobeUpdaterCoreFramework
   /Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterInventory.framework
   - com.adobe.AAM.AdobeUpdaterInventoryFramework
   /Library/Frameworks/Adobe AIR.framework
   - com.adobe.AIR
   /Library/Frameworks/Snapfish.framework
   - com.hp.snapfishframework
   /Library/Frameworks/TSLicense.framework
   - net.telestream.license
   /Library/Frameworks/TSLicense.framework/Versions/A/Resources/EWSMac-GC.framewor k
   - com.eSellerate.EWSMac67108872
   /Library/Frameworks/WacomMultiTouch.framework
   - com.wacom.WacomMultiTouch
   /Library/Image Capture/Support/Hewlett-Packard/Frameworks/HPScanControl.framework
   - com.hp.scan.framework.control
   /Library/Image Capture/Support/Hewlett-Packard/Frameworks/HPScanProfiles.framework
   - com.hp.scan.framework.profile
   /Library/Image Capture/Support/Hewlett-Packard/Frameworks/HPUIExt.framework
   - com.hp.scan.HPUIExt
   /Library/Printers/EPSON/CIOSupport/PBMSupport.framework
   - com.epson.print.framework.PBMSupport
   /Library/Printers/EPSON/EPSON PIC Folder/PIC.framework
   - com.epson.pic.framework
   /Library/Printers/EPSON/InkjetPrinter/Halftone/CHalftoneVIA.framework
   - com.epson.ijprinter.CHalftoneVIA
   /Library/Printers/EPSON/InkjetPrinter/Libraries/ABWPPreview.framework
   - com.epson.ijprinter.ABWPPreview
   /Library/Printers/EPSON/InkjetPrinter/Libraries/CSupport.framework
   - com.epson.ijprinter.CSupport
   /Library/Printers/EPSON/InkjetPrinter/Libraries/CTools2.framework
   - com.epson.ijprinter.CTools2
   /Library/Printers/EPSON/InkjetPrinter/Libraries/EPPolice.framework
   - com.epson.ijprinter.EPPolice
   /Library/Printers/EPSON/InkjetPrinter/Libraries/IJPCFoundation.framework
   - com.epson.ijprinter.IJPCFoundation
   /Library/Printers/EPSON/InkjetPrinter/Libraries/PMSupport.framework
   - com.epson.ijprinter.PMSupport
   /Library/Printers/EPSON/InkjetPrinter/Libraries/PMX15Support.framework
   - com.epson.ijprinter.PMX15Support
   /Library/Printers/EPSON/InkjetPrinter/Libraries/UtilityCore2.framework
   - com.epson.ijprint.UTCore2
   /Library/Printers/EPSON/InkjetPrinter/Libraries/UtilitySub.framework
   - com.epson.ijprint.UtilitySub
   /Library/Printers/EPSON/Libraries/EPTools2.framework
   - com.epson.printer.EPTools2
   /Library/Printers/EPSON/Libraries/SupportX20.framework
   - com.epson.printer.SupportX20
   /Library/Printers/hp/Frameworks/HPWorkflowsManager.framework
   - com.hp.WorkflowsManager
App extensions
   com.getdropbox.dropbox.garcon
Apps
   /Applications/Dropbox.app
Contents of /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist (checksum 3469280363)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Command</key>
    <string>/Library/Application\ Support/Adobe/SwitchBoard/SwitchBoard.app/Contents/MacOS/switchboard.sh</string >
    <key>OnDemand</key>
    <false/>
    <key>ServiceName</key>
    <string>com.adobe.SwitchBoard.monitor</string>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3708734740)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>12</integer>
    <key>Minute</key>
    <integer>29</integer>
    <key>Weekday</key>
    <integer>2</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist (checksum 2972905917)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>EnvironmentVariables</key>
    <dict>
    <key>RUN_WITH_LAUNCHD</key>
    <string>1</string>
    </dict>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.wacom.wacomtablet</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    <string>LoginWindow</string>
    </array>
    <key>Program</key>
    <string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
    <key>RunAtLoad</key>
    <true/>
   ...and 4 more line(s)
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS3.plist (checksum 714202969)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>GroupName</key>
    <string>wheel</string>
    <key>Label</key>
    <string>com.adobe.versioncueCS3</string>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3d</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>ServiceDescription</key>
    <string>Adobe Version Cue CS3</string>
    <key>UserName</key>
    <string>root</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.mice.360Daemon.plist (checksum 2243272199)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>RunAtLoad</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/MICE/360Daemon/360Daemon</string>
    </array>
    <key>KeepAlive</key>
    <true/>
    <key>Label</key>
    <string>com.mice.360Daemon</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 10744905)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.apple.CSConfigDotMacCert-EMAIL-SharedServices.Agent.pl ist (checksum 719951107)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.apple.CSConfigDotMacCert-EMAIL-SharedServices</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>LowPriorityIO</key>
    <true/>
    <key>Nice</key>
    <integer>10</integer>
    <key>ProgramArguments</key>
    <array>
    <string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
    <string>-l</string>
    <string>/Users/USER/Library/Logs/CSConfigDotMacCert.log</string>
    <string>-u</string>
    <string>EMAIL</string>
    <string>-t</string>
    <string>SharedServices</string>
    <string>-s</string>
    </array>
   ...and 4 more line(s)
Contents of Library/LaunchAgents/com.valvesoftware.steamclean.plist (checksum 52074330)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.valvesoftware.steamclean</string>
    <key>Program</key>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
    <string>Public</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>SteamContentPaths</key>
    <array>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps</string>
    </array>
    <key>ThrottleInterval</key>
    <integer>60</integer>
    <key>WatchPaths</key>
    <array>
    <string>/Applications/Steam.app</string>
    </array>
   ...and 2 more line(s)
Global login items
   /Library/Printers/hp/hpio/HPEventHandler.app/
   /Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app/
   /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Font issues: 68
DNS: 8.8.8.8 (static)
Wi-Fi
   link auth: none
User login items
   Steam
   - /Applications/Steam.app
   iTunesHelper
   - missing value
   AdobeResourceSynchronizer
   - /Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app
   Dropbox
   - /Applications/Dropbox.app
   HPEventHandler
   - missing value
   HP Scheduler
   - /Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app
Widgets
   iStat Pro
Restricted files: 110
Lockfiles: 155
Elapsed time (s): 319

System preferences will not open when selected from the apple in the upper left corner. My software is 10.6.8

After upgrading to 10.6.8.... When selecting System preferences from the apple in the upper left corner, no action take place. System preferences will not open.

After upgrading to 10.6.8.... When selecting System preferences from the apple in the upper left corner, no action take place. System preferences will not open.

IPhoto preferences will not open

My preferences menu will not open; I cannot change anything! What steps should I take? (I have Version 7.1.4)
Thank you.

Try this frequently recommended procedure.
Quit iPhoto and delete your iPhoto preferences. Go to your username> library> preferences> com.apple.iphoto.plist. Delete this file. Then reopen iPhoto; it will create a new preference file with all of the default settings.
Good luck.

Safari Preferences Will Not Open

Hi,
Have a weird Safari issue:
When I go to Safari->Preferences or use the key combo, nothing happens. The preferences window will not open.
Also a list of other issues:
     The "find" (apple F) option is greyed out for all webpages.
     "Reset Safari" is greyed out.
     An inordinate number of popups.
It thought maybe adware, but its a fresh install of Yosemite with no safari extensions. Scanned for adware with AdwareMedic, nothing. Nothing with ClamXav. No Mackeeper, no geneio. I've run out of possibilities! Any ideas?
It's safari 8.0.3 (though was happening with the previous version as well), on 10.10.2. Firefox is also getting a lot of popups, but can "find".

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1207 ' 0.5 0.25 1000 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 20 500 300 85 25 20480 1024 20 2000 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier OSBundleRequired PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' 'tsA|[ST]M[HL]' );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n   ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n   '"${k[22]}"'mod date: %s\n   '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 695903914 1443423563 4136085286 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' END { $2/=256;if($2>='${p[19]}') print int($2) } ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/S");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' { gsub(/[()"]/,"",$3);if($2!="="||!$3) $3="N/A";print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { i="'${p[6]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n   "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n   "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n   "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n   "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="us/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");s=system("'"${k[18]}"'\\ :'${k[17]}' \""a[1]"\"/*/I*|grep -q Sa");if(!s) a[1]=a[1]" S";if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{':[^:]+$','P.+:'}'//;s/ +([0-9]+)(.+)/\2: \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[25]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility CReq "apple\.(bird|i?clou)"' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|lv_c|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','a underr|I/O e','USBF'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel}\ extensions Heat System\ load boot\ args FileVault Diagnostic\ reports Log {Free\ space,Swap}' (MiB)' Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes Bad\ plists {I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return; };:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Ev "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/Ev/E/'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 9 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 15 6 36 13;D12 45 20 52 66;D12 16 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 13 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84; D13 61 5 54 75 70;D13 14 5 14 12;C4;};A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19;B4 4 0 86;A2 14 61 89;B5 6 0;B4 6 6 73;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57;A1 21 46 56;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 52 4 8 41;C4;B4 4 12 26 89 23;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3; C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My system preferences will not open. What's wrong?

Question:
Suddenly, the system preferences on my MacBook will not open.
The error box said "the application system preferences can't be opened" and also had the number 1712 in it...
Anyone know what might be wrong?

Try the solution shown in this thread.
Best of luck.

Burn preferences will not open

The burning preferences tab will not open! in fact when clicked it locks up itunes. Itunes then has to be closed and restarated! windows says itunes is not responding.
the dvd/cd drive works for all other applications. all other features and itunes functions work properly.

hmmmm.
okay, let's try see if it's a systemwide issue, or if it is associated with a specific XP user account.
let's try an experiment.
head into your user accounts control panel and create a new user account with full administrative rights. (there's help documentation on how to do that at the left of the control panel screen.) while you're in that control panel, switch off "fast user switching" in your logging-on preferences.
now log out of the old account and log into the new account.
launch itunes. the itunes setup assistant will run, and eventually you'll see a blank library screen. (that's normal ... your music is off in the other account.)
now try opening the burning preferences tab in the itunes in the new account. does it open properly, or does it freeze there too?

My system preference will not open.

First I have OSX 10.6.7. for some reason It will not open. I tried to follow some of the advice that I saw on previous post like deleting com.apple.systemprefence...... and other files from the comments but it still will not open. I need help please.

If you use any utility to clean system caches, stop, as that may impact your ability to launch various Apple applications.

My system preferences will not open, what is wrong?

can some one please give me a hand... I can not open my system prefence from and of the 3 way it can be opened. Is there any place on line that I could possibly reinstall the OS so that it can be functional?

Thanks for your response, and sorry it did not make sence... I wanted to know why my system prefence will not open. I click on it and absoltuley nothing happens. I try to back door it by right clicking to try and change my back ground picture, but that gives me a sound you would hear when the CPU or program won't let you do somthing. Maybe someone else has had the same problem and was able to fix it. I hope that clears it up.

What do I do when Mail preferences will not open for me to edit server list

When my wife tries to send mail a message says server listed doesn't work and asks if I want to edit the server list. When we attempt to do this from the message or from the tool bar, Preferences does not open. BTW It is not grayed out. WHen I log in on the same computer, I can open preferences.

You don't say who your mail server is and what preferences are you trying to access? Just a thought, though, try going to Mail preferences, Accounts and Account Information. Is the "use only this server" box checked? Different mail servers require different settings. Gmail, for instance, requires that box to be unchecked. Good Luck
RM

Preferences will not open??

Similar Messages

Maybe you are looking for