Prefix problem in the Output XML
Hi,
I am working on iIdoc to file scenario.
For the Target file structure I have created XSD as it contains a prefix wmb in every field. But when I test , I cud see the prefix as ns0 in MONI. How do I replace the Prefix ns0 with WMB
I think the probable solutions could be using XSLT Mapping or use XMLAnonymizerBean Module
Any Inputs would be appreciated.
Regards,
Varun
Hi Varun,
> For the Target file structure I have created XSD as it contains a prefix wmb in every field. But when I test , I cud see the prefix as ns0 in MONI. How do I replace the Prefix ns0 with WMB
No need to create external XSD, follow the standard process. XMLAnonymizerBean provides an easy solution.
Use the following settings at Receiver communication channel
Module tab
Module Name : AF_Modules/XMLAnonymizerBean
Type :Local Enterprise Bean
Module Key
Module Configuration
1. Module Key : 0
Parameter Name : anonymizer.acceptNamespaces
Parameter Key : <interface> WMB
2. Module Key : 0
Parameter Name : anonymizer.quote
Parameter Key : '
Regards,
Sunil Chandra
Similar Messages
-
Junk Characters in the output XML file after Parsing
Hi
I am using DOM parser to parse an XML file.
After parsing the input XML file, i am fetching some contents
from the same and also putting the same contents in the parsed output file which is also an XML file.
The problem here is that the after putting the contents to the output XML file from the input XML file,
some junk character appears at the end of each and every tag in the outputfile.
The junk character is some thing like this : " ampersand hash thirteen and a semicolon "
(*THE MESSAGE DID NOT ACCEPT THE SYMBOLS KINDLY TRANSLATE THE ABOVE WORDINGS*
INTO SYMBOLS)
This character gets appended at the end of each and every tag in the output file due to which the output file
is not recognised as an XML file.
Please let me know as to why is this character appearing and also please suggest some solution
for the same.
-Thanks in Advance.
Edited by: itskarthik on Oct 10, 2008 7:16 AM
Edited by: itskarthik on Oct 10, 2008 7:18 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AMWierd.
Try this piece of code. (You can always change it to use input file and output file instead of string if you want)
What is your output?
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
public class XMLTest {
public static void main(String[] args) throws Exception {
String input = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n" +
"<test>\r\n" +
"</test>";
System.out.println("Input:");
lookForCR(input);
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
Document doc = factory.newDocumentBuilder().parse( new ByteArrayInputStream(input.getBytes()) );
Source source = new DOMSource(doc);
ByteArrayOutputStream bArrOut = new ByteArrayOutputStream();
Result result = new StreamResult( new StripOutputStream( bArrOut ) );
Transformer xformer = TransformerFactory.newInstance().newTransformer();
xformer.transform(source, result);
System.out.println("\nResult:");
lookForCR(bArrOut.toString());
System.out.println("\nDone");
public static void lookForCR(String input) throws Exception {
char[] chars =input.toCharArray();
for ( char chr : chars ) {
if (chr == 13 ) {
System.out.println("Has 0x0D character!!");
class StripOutputStream extends OutputStream {
OutputStream out = null;
public StripOutputStream(OutputStream out) {
this.out = out;
@Override
public void write(int b) throws IOException {
if ( b != 13 )
out.write(b);
}- Roy -
Not receiving the output xml file from BPM
Hello
I am doing a scenario where I'd be sending two files in text format to the BPM workflow which would be using Fork and Correlation to merge these two files into one file and send the output xml file as receiver. Problem is that the two files are successfully converted into the xml messages and are displayed in SXMB_MONI but the output file which would be received from BPM engine as receiver is not being generated and displayed in SXMB_MONI as well as RWB. Please suggest any probable solution.
Thanks.I don't think you can manipulate .ai files in Flex /
AIR. -
Proxy output not displayed in the output XML
Hi,
I have created a web service and is calling the service using SOAP UI tool. To do it i have created an RFC Fm and inported to SAP PI and activated it with the input and output parameters that i need. When i am calling the service through the SOAP UI, in debugging( in the provider class of the service interface of the sproxy transaction ) i am able to see the values filled in one of the parameters but the same is not getting displayed in the output XML.(Response). Can any one please suggest what cud be the reason.
ThanksHi,
can give us a hint? Code output, screenshot? btw I hope your service is a Synchronous service.
Thanks Nick. -
How to remove namespace link from the output XML
i have to remove 'xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions"' (namespace) from the output xml file which is generated from the BIP. I need my output XML file without that namespace link, this namespace link is coming for each element.
Anybody know how to do that please help.
output xml file
<?xml version="1.0" encoding="UTF-8" ?>
<Reports version="2.00">
<deliveryNote xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<subjectId />
</deliveryNote>
<deliveredReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<referDate>[Delivery note->H4]</referDate>
</deliveredReports>
<simpleReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<numberOfReports>2</numberOfReports>
<nReport>
<reportName>Xyz</reportName>
<reportVersion>1.0</reportVersion>
<observations>
<numberOfObservations>15</numberOfObservations>
<columnObservation>
<y>9</y>
<rO>
<x>14</x>
<o>11</o>
<o>21</o>
<o>121</o>
</rO>
</columnObservation>
</observations>
</nReport>
</simpleReports>
</Reports>
my xslt file
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions" >
<xsl:output method="xml" encoding="UTF-8"/>
<xsl:template match="/">
<xsl:element name="Reports">
<xsl:attribute name="version">2.00</xsl:attribute>
<deliveryNote>
<subjectId></subjectId>
</deliveryNote>
<deliveredReports>
<referDate>[Delivery note->H4]</referDate>
</deliveredReports>
<simpleReports>
<numberOfReports>2</numberOfReports>
<nReport>
<reportName>Xyz</reportName>
<reportVersion>1.0</reportVersion>
<observations>
<numberOfObservations>15</numberOfObservations>
<columnObservation>
<y>9</y>
<rO>
<x>14</x>
<xsl:for-each select="TEST_XML/LIST_R1/R1">
<o><xsl:value-of select="xdoxslt:lpad(COL1,10,' ')"/></o>
</xsl:for-each>
</rO>
</columnObservation>
</observations>
</nReport>
</simpleReports>
</xsl:element>
</xsl:template>
</xsl:stylesheet>Please post the same in BI Publisher forum
BI Publisher
Thanks,
Vino -
Micro Zen | problem with the output "ho
Hello.
For a few weeks now the contact in the output "hole" get worse and worse. When i plug in my earphones and only touch and bend the plug a little bit in direction to the screen, the sounds gets all numb,quiet and sometimes i hear nothing. It turned that worse that i can't have the Zen in my pockets anymore, cuz the cable bends and so the sounds goes all quiet...
I think it's a warranty subject, what do I have to do to send it in? I had a problem last july with it already and sent it in, but forgot the procedure it goes through
Oh and I also handed it in to my local shop where i bought the Zen in 2005 because of a hardware issue and they got me a new one from creative (so they handled the whole RMA procedure).
So what am I gonna do now? I bought the Zen in july 2005 and Creative already knows that because of the first RMA ^_^Before you do anything. Which headphones are you using? Are you using a case?
My case fits around the hole perfectly so if the plug of the headphones is to thick like my Sony MDR-V50 (http://images.amazon.com/images/P/B000092YPR.0.LZZZZZZZ.jpg) it will play.. but if I move the wire around just a bit only the left side of the headphones will work. So I have to use the earbuds that came with my MicroPhoto.. a shame to cause headphones sound so much nicer then earbuds.. oh well. Try a different pair of headphones/earbuds. -
Adhoc Query- problem with the output file format
Hi Gurus,
I have a problem in exporting the output of an adhoc query to Excel format.
The menu option I chose to export the report data into Excel is List>Export>Spreadsheet.
However,I think I've just pressed the wrong option to export my report and now I can't seem to change it from a HTML file option.
Can anybody help me correct this output setting.
Points assured for apt help...Hi Sushil,
There are two ways to save the output in the excel format.
As you have mentioned, you can use
List -> Export-> Spreadsheet.
Then select table. Now the output will open in a spreadsheet.
The other way is
List -> Export-> Local File
Here you need to select the option spreadsheet. Then mention the path where you want the file to be stored. Also mention the format as .xls
Hope this helps
Regards,
Brinda -
Problem with the Output Type and Transaction ME9F
Hi,
I have an Output Type (xyz) and Program (abc).
If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
Printout.
If for ME9F i give the output type ( pqr) then am able to get the Spool and
Printout.
Problem is :---
when am using O/P Type ( xyz ) for ME9F then am abel to process but am
not able to get the spool and not even printout.
I want to know where it can be wrong.
It's a high priority object.
Kindly help me out.
Thanks,
Zia.hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r <b>entries (xyz) and (pqr) are having medium 1.</b>
if its missing then assign it ..
regards,
VIjay -
Problem displaying the output in the same view
hi Gurus,
I have developed an web dynrpo application and have three views, in the first view I am having an input field from which I am calling a BAPI by giving that input field value as input to the BAPI.
Now is it possible to display the output also retrived from the BAPI on the same view.
Thanks and regards
krishi LM,
Thanks for your fast response.
I think I was not clear in explaining my problem.
I have a view in which I have an input field which is the input to the BAPI, now on entering the value in the input field I have a submit button, on clicking the BAPI should be executed and also the the output should be displayed on the same view.
Now regarding the mapping both the input and output are in the same context, would that a problem.
And also after getting the output from the BAPI I have to do some validations based on the output from the BAPI and get some message printed on the view.
Please help me in this issue.
Thanks and regards
kris -
I have some more problem in the web.xml file and url-pattern in my syste
HI ALL!
How can I create and place the web.xml and URL-parrten.Because I run
the tomcat in my computer with ME system.
Hocwhat is the problem? please be more specific and detailed? check a sample web.xml file and make your own one and place it in your <application-context>\WEB-INF folder..
-
Problem in the output of J1INQEFILE
Dear All,
I am facing a problem to capture the WHT amount in J1INQEFILE.
I m working on 4.7.
we have seperate tax types & seperate tax codes for every section code. WHT cycle is working fine till J1INQEFILE, which is a eTDS returs. System is giving me the total amount of TDS deducted for every vendor, which is shown as per the every document. If i drill down from the report i can see the document entry.
But the standard SAP report have columns for TDS, surcharge & Ecess.
When I execute the J1NQEFILE, The TDS column is capturing the values of
TDS Base amount + S. Ecess
and the Surcharge of 10% and the ECess of 2% is calculating Perfectly.
I have also applied note no: 1097621, yet the problem is persisting.
The OUTPUT I want to have is the
TDS Column to show just the TDS base amount only
and the
E Cess column to show the E. Cess + S. Ecess
and
Surcharge remaining unchanged
What changes do I need to do further to pull the desired output
Thanks & Advance,
ABAPerrefer to sap note: 984623, from the above note pick notes relvevant for version 4.7
Ur problem will be resolved. -
Problem in the output Excel sheet.
I have a requirement of adding two bands to the existing report.The output sheet is Excel which is off 4 sheets formatted with colors and headings as ouput which is done by calling the XML Classes.
I am not able to find my two fields which are added in the output excel.
Please let me know your suggestions.check the structures, if you made changes is the correct structure or not...
make sure data is beeing pulled into you tables before passing to excel FM.. -
Extracting Images from EPS - Problem with the Output
Hello,
I got a big problem extracting images from an EPS, which has been made in InDesign. The image does not appear correct.
Source code:
%ALDImageFileName: Speicher:image.jpg
%ALDImageDimensions: 30 30
%ALDImageCropRect: 0 0 30 30
%ALDImageCropFixed: 0 0 30 30
%ALDImagePosition: 203.8677 344.8913 203.8677 359.2913 218.2677 359.2913 218.2677 344.8913
%ALDImageType: 4 8
%%BeginObject: image
[14.4 0 0 14.4 203.868 344.891 ]ct
snap_to_device
Adobe_AGM_Image/AGMIMG_fl cf /ASCII85Decode fl /RunLengthDecode filter ddf
<<
/T 1
/W 30
/H 30
/M[30 0 0 -30 0 30 ]
/BC 8
/D[0 1 0 1 0 1 0 1 ]
/DS [
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
[AGMIMG_fl 30 string /rs cvx /pop cvx] cvx
/O 3
>>
%%BeginBinary: 1
img
p&G-p!<E*"!<<3"!!!&i!!30$!Vl`q!V$-m!WW3&!r`0#!Wh]h!!20]!WW3$qZ$^!!!!&f!!30$!WE'!
!WE'$!<<*#nc/[l!W<!#!WW3%h>dNVnGiXl!<<-)!!*'"!<<2f!<*$!!<3)a!!!&t!!*-%kl:\ar;Zm"
!!2He#6G2G(D[>Z!<*#e!!WKUEK,/l!r`0"!V$.!!Wi?'-t[mD-NjDN!!2Zk!!3#u"T\]4$OR%8!!!&h
!!<6)*\I@D!\,8pq>g3h%KQP0';ta-rr2ho&-2b3mf3Y*Q/q,jk2D[9"76'h!=o#B!Y,22n,Nn!!!=Q!
0.ee,0/"XS!VHHl!!E<'!"[l]rrUsd!Ug!r&'a/!k3(mej38#8mJm8&'`/UF'`J.(!"8l.+"o,p/hSe-
/M8.8!!<6%!i#Yn!<2rs!2Ao^$NZFPk2tpjkND!jP3r;O%29TU'`o-b%e'H-!=:8,0/"h-.kN>(.gkeH
"T^(Js8W&srrE$$rr;gE!V-4"""*$ljlY^djQYmmi$\'q!W`9(p([Q1nc/dn!#@(:r[nC..kE8)/emgU
!<IHErs8W(rr<#trr76B!:p1!CZadBk2kmhj65^iD"%E-$5O?k'`&OE$M"0,!<<uh0.ee0/h\e,/h.k2
!!*+arVm-$s8W)us8J2U!;Z[(L?.U[kN:sflf@0hK^f$D!=T\>'a5?f'c%2YnGit6/1iM*/1iA*.kWFi
nc/dn!I+SBqYpWrrcdo5!<N60C$4[@ki_*hl0.?lD".K0!=9MV'c%S_'`f!Vnc01&!!t50/M8P+/h8J)
.gH+F!!+PDrVllsrVlrp.KT,@#QauQip#Ifk3*$4ki:gb-3Nc<$j.4Z'GV>s'bqJt('F(,%06GL/hJ_.
.k<;..j"f]!!32!rql]tr;WMmmf3c`k2tsgk2tmikEZ,Kn,NJ!'`/UJ'G_,X!V-6i!=L8*/2&S./M&=P
!!2Ti"9AV]s8N#t"o\JY&c_t$!"-g0j6,RdkNBr!!r2ii!!!]1'a,9f'*84(!"Ar/""YuT/M8Y)!WW3$
nc0%!!!!Z$s8N#ts76`i!"T,3!!3\bl0.?qjkC7H!!;`lrW!!#!>PMJ!u;Ub!Ug$f!=JlU/M/S*/ggZ#
!!2Ng$3K)as8N&tjT#8]m/R@3k2b[ck03)j!>?4H'`\p6!!**(r[e6p.kWIZmJm:h!#kk:#.sp7ru_:B
mJmV6jQ>U%kN:kH!!!)h!!!'!'`\gE'`eC:mf3^r!=pb8/ds9_.h;[J!!u[*s8GIerr6%#m/RGck3(kk
kNM&%!Up'o!<<*)'bhDfrY5G=!Vufj!"K#0!#mOB.0(kM0,afj!V$-u!<A8^s6B[Es8S8_!U]poKBMCG
!7'`iKECN@#RhF_'*&[\'b'X5r;[9-!$a!F*W[<7.jP)q!V-4#!<<,As8T>(W;lnB!!!&g!"63skFhmD
jlEuS!!2Ng#S7^d%KHtR'bTm7!s/H(/-mj['`\n!/1Ukk!"985s8@'?Du]k7%KHP#!"8l0$KC71C'%l,
jl$a?!!<6%!!3'6!X\o6rY5J8!!2Qh#Ri::0*_I`/1U`S%.4)q5Q:Zg2ukf6s8P=a!V$-t!]]?)jY?ff
kN:qhmJmFp()7Pf!!N99!!Vcj$l1NL.KKPM/1iIi!!3'!o`,F%!dakFpBL[$pAb/A!Up's!H@5cf`qK\
hWF!BmJmV%'GV;_!!*`J'FFm3!!WH(!?WpE,Q7ZH+tP;f!!2foq>^W-s8Tn6!!L"8s0r.!!">[bkcXsf
!3>;FU]CPd!!<]G'bL?E!tZ.^&+9K$!\#`P)?'U>'eM$g!!2Zk!W`9$$g.KhLB.ATL&_2?"7Q9n!RU)n
I/X*KGN@l9"Rc<t',;8j!!!$,'bhAP!!WQ+!"US5%fQG1%PKFQn,NUm!*fL'9)\en8,rO]!V-4"!rrBu
jQ/].!WYOLl&b?6"9AcD'aFX;"9oSU%0>nt$NV(q!rr<%"YC_q"7Z@"!<<+Eq@Wc/!#,C9"9&;k!!E?)
D;u0+!!<qtS-&0["T\T'$5EXA!!33:%da5t!<<]/!!3u<!V$-o!<<*#!FZ$-!!A;d!!2ipq#CKu!<?7$
!!WK)KEM8T"RZ6i$2so,!<<Q0li77k!!30$!<</h!!!'!!!E<'!!!&c!"8o/!!*'#"98E'!WW;h!!!'!
!!NB'!<<*#n,N[o!<<*#!!!'!!!!&f!!E<&!!*-"!!!'!!!**%o)K!s!!*-$!<<*#!!<-"!Wi?&l2Ueb
rVup!q#Gp~>
%%EndBinary
%%EndObject
Orginal image Size 553,9 KB
After decoding the size is only 1,8 KB
First try.
public class ASCII85Decode {
private ByteBuffer buf;
* initialize the decoder with byte buffer in ASCII85 format
private ASCII85Decode(ByteBuffer buf) {
this.buf = buf;
* get the next character from the input.
* @return the next character, or -1 if at end of stream
private int nextChar() {
// skip whitespace
// returns next character, or -1 if end of stream
while (buf.remaining() > 0) {
char c = (char) buf.get();
if (!isWhiteSpace(c)) {
return c;
// EOF reached
return -1;
public static boolean isWhiteSpace(int c) {
return (c == ' ' || c == '\t' || c == '\r' || c == '\n'
|| c == 0 || c == 12);
// 0=nul, 12=ff
* decode the next five ASCII85 characters into up to four decoded
* bytes. Return false when finished, or true otherwise.
* @param baos the ByteArrayOutputStream to write output to, set to the
* correct position
* @return false when finished, or true otherwise.
private boolean decode5(ByteArrayOutputStream baos)
throws PDFParseException {
// stream ends in ~>
int[] five = new int[5];
int i;
for (i = 0; i < 5; i++) {
five[i] = nextChar();
if (five[i] == '~') {
if (nextChar() == '>') {
break;
} else {
throw new PDFParseException(
"Bad character in ASCII85Decode: not ~>");
} else if (five[i] >= '!' && five[i] <= 'u') {
five[i] -= '!';
} else if (five[i] == 'z') {
if (i == 0) {
five[i] = 0;
i = 4;
} else {
throw new PDFParseException(
"Inappropriate 'z' in ASCII85Decode");
} else {
throw new PDFParseException(
"Bad character in ASCII85Decode: " + five[i]
+ " (" + (char) five[i] + ")");
if (i > 0) {
i -= 1;
int value = five[0] * 85 * 85 * 85 * 85 + five[1] * 85 * 85
* 85 + five[2] * 85 * 85 + five[3] * 85 + five[4];
for (int j = 0; j < i; j++) {
int shift = 8 * (3 - j);
baos.write((byte) ((value >> shift) & 0xff));
return (i == 4);
* decode the bytes
* @return the decoded bytes
private ByteBuffer decode() throws PDFParseException {
// start from the beginning of the data
buf.rewind();
// allocate the output buffer
ByteArrayOutputStream baos = new ByteArrayOutputStream();
// decode the bytes
while (decode5(baos)) {
return ByteBuffer.wrap(baos.toByteArray());
* decode an array of bytes in ASCII85 format.
* <p>
* In ASCII85 format, every 5 characters represents 4 decoded
* bytes in base 85. The entire stream can contain whitespace,
* and ends in the characters '~>'.
* @param buf the encoded ASCII85 characters in a byte buffer
* @param params parameters to the decoder (ignored)
* @return the decoded bytes
public static ByteBuffer decode(ByteBuffer buf)
throws PDFParseException {
ASCII85Decode me = new ASCII85Decode(buf);
return me.decode();
2. Try
public class Ascii85Decode {
private final FileOutputStream fos;
private Ascii85Decode() throws FileNotFoundException {
File f = new File("/home/markus/1/test/bild.jpg");
fos = new FileOutputStream(f);
@Override
protected void finalize() throws Throwable {
fos.close();
super.finalize();
public static byte[] decode(byte[] in) throws FileNotFoundException, IOException {
Ascii85Decode ascii85Decode = new Ascii85Decode();
ascii85Decode.setData(in);
ascii85Decode.decode85();
return null;
static long pow85[] = {85 * 85 * 85 * 85, 85 * 85 * 85, 85 * 85, 85, 1};
private byte[] in;
private void setData(byte[] in) {
this.in = in;
void wput(long tuple, int bytes) throws IOException {
switch (bytes) {
case 4:
putchar((int) (tuple >> 24));
putchar((int) (tuple >> 16));
putchar((int) (tuple >> 8));
putchar((int) tuple);
break;
case 3:
putchar((int) (tuple >> 24));
putchar((int) (tuple >> 16));
putchar((int) (tuple >> 8));
break;
case 2:
putchar((int) (tuple >> 24));
putchar((int) (tuple >> 16));
break;
case 1:
putchar((int) (tuple >> 24));
break;
void decode85() throws IOException {
long tuple = 0;
int c, count = 0;
int i=0;
for (;;) {
switch (c = in[i]) {
default:
if (c < '!' || c > 'u') {
System.err.println("%s: bad character in ascii85 region: %#o\n");
System.exit(1);
tuple += (c - '!') * pow85[count++];
if (count == 5) {
wput(tuple, 4);
count = 0;
tuple = 0;
break;
case 'z':
if (count != 0) {
System.err.println("%s: z inside ascii85 5-tuple\n");
System.exit(1);
putchar(0);
putchar(0);
putchar(0);
putchar(0);
break;
case '~':
if (in[i+1] == '>') {
if (count > 0) {
count--;
tuple += pow85[count];
wput(tuple, count);
c = in[i+1];
return;
System.err.println("%s: ~ without > in ascii85 section\n");
System.exit(1);
case '\n':
case '\r':
case '\t':
case ' ':
case '\0':
case '\f':
case '\b':
case 0177:
break;
i++;
private void putchar(int l) throws IOException {
//System.out.write(l);
fos.write(l);
Does anybody have an idea to solve the problem?A scan from string function can be used as per the attachment. The double \ ('\\') is in the format string in order to interpret the '\' characters in your input string as literal characters and not special formatting.
Message Edited by Dennis Knutson on 07-10-2006 03:53 PM
Attachments:
Scan From String.JPG 5 KB -
Problem with the output ports of the data service !!!!! attention
Hi,
I have created a functional module x using abap programming.
The functional module x with one input and one output table.It successfully executed in abap.
Later i activated and used it in visual composer 7.1 .It worked perfectly fine.
The input port displayed was :Hollow Diamond shape
The output port displayed was: Filled Square shape.
Then i thought of changing the abap program by adding one more input and one more output table.
So i have two inputs and tow output tables.
The abap program exceuted correctly.
But when i used it in visual composer 7.1 . It didn't work.
As
The input port displayed was :Hollow Diamond shape ( correct )
The output port displayed was: Filled circle shape.( Not a correct display ).
So i couldn't drag the table output from the circled port.
But When i test the data service then it gives perfect results.
Later i created a new functional module Y with same two inputs and same two output tables. It worked fine.
Please help me . When ever i add new tables to already activated data service i face the same problem.
Kindly advice.
Regards
TekumallaHi,
Following is an image of a slide describing the port types in Visual Composer:
http://img116.imageshack.us/img116/2465/portshapesrt7.png
Which port is appearing on your service?
Would it be possible for you to send a screen shot of your service in VC?
Thanks,
Shai -
Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
SeeteshMy point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz
Maybe you are looking for
-
How Do I Get More Printing Options As on My Desktop???
I am printing on a HP Officejet 7410. On my desktop with the HP software I can change Print qualities as well as many other factors. I don't seem to be able to do that with my Powerbook? Can anyone help?
-
TS3694 how to activate a deaktive ipod that needs to connect to itunes
how do i activate a deactive ipod
-
XML Reports Conditional Formatting
Hi.... Am having an issue on XML Conditional formatting, that i want to set formatting for number field for 4 conditional... is it possible to achive ? this will be really great if i get can any assistance on this?. Thanks in Advance!!! -Suresh.S Edi
-
Noteboard webpart in community site with publishing feature enabled
Hi All Noteboard webpart works fine as long as publishing site/web feature is not enabled but after it is enabled people with contribute permissions can not see the noteboard comments of the people with Moderate/Full control/Site collection access an
-
I am not able to update my app or download any apps
I recently used my credit card to purchase something in one of my games, I want to take the credit card off, because I am not able to download or even update a game I have because it keeps asking me for my credit card information and when I do enter