Preloader not going dissappearing immediately

so my problem is this. when the preloader loads the main
movie into the container it doesnt go away immediately. it also
messes up something with the list which is supposed to start off
being not visible until you push the list of works button. it shows
the list right away and then wont let you close it. any advice is
greatly appreciated
thanks,
anna
this
is where you can see the problem.
this is
how the list is supposed to work.
it works when it doesnt have a preloader.
this
is the flash main file
this
is the preloader

anna needs help wrote:
> so my problem is this. when the preloader loads the main
movie into the
> container it doesnt go away immediately. it also messes
up something with the
> list which is supposed to start off being not visible
until you push the list
> of works button. it shows the list right away and then
wont let you close it.
> any advice is greatly appreciated
remove the _root from your Visible action.
You missing the path. The file on its own has correct path,
but once you load
it in movie holder within another level, you share timeline
with the main movie
so your path changes automatically to
_level0.container.list_mc._visible....
That is why the action can't find the target.
You can remove the _root or change it to
_root.container.list_mc._visible=false;
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Preloader not going to frame 2 after 100% loaded

Hello.
I recently got help concerning a preloader error.
Happy to say the error message got resolved here on the forum.
However I now have new problem.
After site is loaded a 100% it is stuck on the preloader image in frame one instead of going to frame to of my project.
Can anyone help me with this please. I suppose further information about my project is needed so just say what to post and I´ll post it.
Sincerely
Ronny

This resulted in a window opening with this filling it:
2 2
loaded
2 2
loaded
2 2
loaded
2 2
loaded
2 2
loaded
2 2
loaded.....
Seamably infinate..
And the swf is still stuck on frame 1...
Now this is what I´ve got:
Frame 1 of the preloader movieclip:
var amountLoaded:Number = this.framesLoaded/this.totalFrames;
loadText.text = Math.round(amountLoaded * 100).toString() + "%";
Frame 2 of the preloader movieclip:
trace(this.framesLoaded,this.totalFrames);
if(this.framesLoaded == this.totalFrames) {
trace("loaded");
this.gotoAndPlay(3);
else {
this.gotoAndPlay(1);
Frame 3 of scene one (the main timeline):
trace("goto",this.currentFrame)
(Below this there is a lot more actionscripting relating to some buttons).
Preloder on frame 1 and rest of the content on frame 3 (scene 1).
Is this about right?

Computer not going to sleep when lid closed

My wife's new MacBook Air has a couple of problems we can't figure out. First sometimes the computer is not going to sleep when lid is closed and when we lift the lid everything is frozen.
Second, the user Library folder is not seeable in her user account. I know it's there because on the side bar there's a short cut to Preferences folder which we can open.
Strange behavior.
Thanks,
Ron

Ron,
The user library folder (~/Library/) is hidden by default in Lion. I assume Apple doesn't want people mucking around with the sensitive files in there. So this is normal behavior.
As for the freezing issue, I would suggest you reset your power management and perform a safe boot to clear out caches. You should also see if the issue persists after disconnecting USB perhipherals.
Here's how:
Power Management:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Safe Boot:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

Preloader Not Loading Until The Start of Lesson In Captivate 7

I created a Scorm 2004 compliant lesson using Captivate 7. The file size is ~7MB. When I load and run the lesson on our LMS I don't see the preloader until 3-4 seconds before the file loads. I'm staring at a blank screen for about 45 seconds before anything happens. I have the preloader set at 10% but I can't get it to work.
I loaded the file to one of our FTP sites and ran it on an html page and it does the same thing.
Our customers are asking us why there is no indication that the lesson is loading and all I can say is it's a problem with Captivate 7.
I upgraded to 7 because I was told the problem was fixed, but it's still bad.
Any help is appreciated.
Thanks

Yes, it's set to look in the Cp7 preloader folder. I found this on a Captivate website and I think it answers the question.
"As mentioned, preloaders are only really applicable for HTM/SWF output. But what you may not realize is that they will only work if the content is served from a web server over HTTP. Conversely, the preloaders will NOT work if the same content is served up from a LAN server drive over TCP/IP. This is due to the fact that SWF preloaders need to communicate with the server to calculate and show the percentage of file currently loaded. This communication works with web servers, but not with LAN servers."
Unfortunately, Cp7 preloader is going to work on our LMS. I'm going to build a preloader class in Flash and call the Cp7 swf using that.
Thanks for your help
Date: Sat, 18 Jan 2014 00:34:37 -0800
From: [email protected]
To: [email protected]
Subject: Preloader Not Loading Until The Start of Lesson In Captivate 7
    Re: Preloader Not Loading Until The Start of Lesson In Captivate 7
    created by RodWard in Adobe Captivate - View the full discussion
If you still have Captivate 6 on your PC, then make sure that the preloader in this Cp7 project is not pointing at a folder in the Cp6 install directory. It should be using a Cp7 preloader.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6026026#6026026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6026026#6026026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6026026#6026026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Sent mails staying in sending and not going to sent mails

Hi everybody,
I have the following problem: Sent mails are staying in sending with 100% sent (showing activity, command+0) and not going to sent mails when they are actually sent and arrived to the recipient.
What can I do? Maybe reinstall it? Is there any other solution that might work?
Thanks, enjoy your day,
Cédric

Hello again,
In the screenshot you emailed me, there are files leftover from when this mailbox was used in Jaguar (10.2) or earlier, and also files leftover from when it was used in Panther (10.3.x) and Mail 1.3.x. Specifically all files except the folder Messages (and its contents) are no longer used by Mail -- you can check by using Get Info in them and you will see the dates last modified to all be prior to your upgrade to Tiger. How long ago did you upgrade? Did you find that all mailboxes appeared to have the messages in them that you knew were previously there (at the time of upgrade)? If so, quit Mail and in the Finder remove all files in the Sent Messages.mbox folder except the Messages folder. Then relaunch Mail and immediately use Rebuild.
However, if your Inbox and other mailbox have similar leftover files there might be some impact from that. Check the other mailboxes and let us know. See:
http://docs.info.apple.com/article.html?artnum=301315
If other xxxx.mbox folders have the Info.plist file, then leave it, and do not delete. If you upgraded recently, and you think messages that you saw immediately after upgrade were not all-inclusive, then post back. However, with this Sent Messages.mbox folder the Messages folder size exceeds the size of the mbox file (where message content was once stored) so it gives the appearance of a good, full, conversion.
If you remove the Leftover files from other mailboxes, I would suggest using Rebuild on each of them, although if they seem fine, otherwise it may not be needed. There is another procedure to force reindexing of all mailboxes (Rebuild freshens the Envelope Index with respect to only the one mailbox) if needed.
Ernie

PO email not going to Vendor

Hi,
We are in ECS, SRM5.0, and I am trying to send the PO output via email to the vendor, but its not going, I have a valid email in the vendor master and even I went to the output tab of the PO and tried to send it to myself by clicking "Order and send immideately" button.
I even checked in SOST, its not even in there? any clues are appreciated on this
Thanks,
CS

Hi CS
Processing when saving IS A CORRECT but however is it applicatle note for you
Note 872074 - Order and send immediate output action is not processed.
Symptom
In transaction process purchase orders, at PO -> Change -> Header Data ->
output, select any output medium (for example mail or xml or print) and
click the button "Order and Send Immediately". Then the output trigger is
created but the action is not processed immediately. And in the output Log
the action remains with status "Not Processed". And this action has to be
executed manually.
More Terms
BBPPO01, BBP_POC, local PO, PO, Create purchase orders, Order and Send
Immediately, output, status 0, Not processed, output action, email, mail,
method call, xml, prn, print,
interface If_lock_ppf, PPF, RSPPFPROCESS, action definition, Process using
selection report, output trigger, BBP_PPF, Issue purchase orders, report,
BBP_PD_PO_DEF, BBP_PD_PO, procurement document, standard_PO, class,
cl_proc_doc_bbp, lock enqueue, implementation if_lock_ppf~enqueue, lock.
Cause and Prerequisites
This is caused due to program error.
Solution
Implement the attached corrections or import the corresponding Support
Package for the below given correction instructions.
regards
Muthu

My ipod backlight turns on briefly when i hit the option button, but goes dim immediately?

My ipod backlight turns on briefly when i hit the option button, but goes dim immediately, even when i touch the screen? Apps seem to work fine but no backlight. Tried updating the Ipod, Tried Resetting the Ipod, Tried turing it off then on, Tried recharging... still no repair?

I restoring the iPod to factory defaults/new iPod does not solve the problem you likely have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
What s the option button you are talking about. No such button is described in the Ipod Users Guide.

Payment Term from Vendor is not going to Freight PO

Hello All,
I am not MM consulting but I need to solve a problem.
As we know when I save a shipment cost document SAP creates a automatically PO for carrier as the configuration.
I have the payment terms registered in the Vendor Master (Carrier) but when I save my ship cost document and the system creates the PO the payment terms it is not appearing in the PO and consequently is not going to MIRO.
How should I do to take the Vendor Payment Term to the Freight PO?
Thanks
Marcos

Hi,
   Ensure that the payment terms is maintained in the purchasing view in MK02 for the same purchasing organization.
   If its maintained, the same will be displayed in the automatic PO as well. If its not copied, please create a normal PO in ME21N and check whether the payment term is displayed in header - Delivery / Invoice tab.
   If you are in old release, refer the note: 358506 - Auto Service PO Creation - Passing Values into the Function
   If you are using TM system, refer the note: 1897588 - Payment terms not copied from Vendor master to PO
    If the notes are not valid, then you may check for OSS notes or raise an OSS ticket to SAP.
Regards,
AKPT

Background Job not Printing TOs immediately

Hello experts,
I am having an issue with printing Transfer Orders created by background job, the output requests are sent to the output controller with status '-' . It works when I manually create the TOs or if I run the RLAUTA10 program with my userID in SE38 .
I have set the background job user default print parameters in SU3 to print immediately.
Also in the Job step, I have set up the print parameters to 'print immediately'
I have assigned printer for sorce storage type & set the indicator to use the source sto type in OMLV, The printer seems to be determined correctly, I've checked the Spool request name & printer in the spool controller, only issue seems to be the print not being triggered immediately.
Not sure, if there is some other setting that I have to make to be able to print the TOs created by the background job immediately.
Any help would be appreciated.
Thanks
Kris T

whether the printer which you assigned is configured in SAP (network printer)? or LOCL?
printing may not happen if LOCL(background job)
Thanks

Videos Not Going On Macbook Pro

I got a macbook pro in March before I left for vacation. I've been working on putting pictures and videos from a hard drive(I think lol) on to the macbook pro, but the problem is the videos won't go. Pictures go fine. is there a way to get videos to go on it. videos from ipod touch, and iphone go on fine. just on the hard drive not going on. Not a big deal, just hoping to get some of my videos on it for a project. If I can't I'll just use pictures and make a slideshow that way and use my other program on regular computer for videos

I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.

My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

How can i reset my app store setting? i have signed in and out with my own apple id but i used a different one at first and that one is not going away

How can i reset my app store setting?
I have signed in and out with my own apple id but i used a different one at first a few years ago and that one is not going away how do i change it to my own apple id?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. Your only option is to delete the content and buy it again with the new Apple ID.

IPhone 4 iOS 4.1 - Calendar App List View Not Showing Events Immediately

After upgrading to iOS 4.1, whenever I open the calendar in List view mode the events do not show up immediately. I have to navigate to the "Day" style or "Month" style before I can see any events. All the events are viewable normally in both the "Day" & "Month" style calendar but the "List" view.
I regularly sync my iPhone with iCal events and with Google calendar. I did delete and re-added the Google account but the problem persists.
Has anyone faced this problem? I will be doing a full restore again today. My wife's iPhone 3GS is working fine with the 4.1 build of 3GS.
Message was edited by: Raja Roy

Hello all,
I have the same issue with my iPhone 3G under iOs 4.1 (8B117) with one local calendar and three Google calendars. The first time the Calendar application is loaded, if it opens in "List" view, no events are displayed. Switching to another view is enough to get the items back. In "Day" and "Month" views, the events eventually appear after some time (~5 to 10 seconds).
My boyfriend has the same problem on his iPhone 4 under iOS 4.1 (less annoying because of multi-tasking).
Hopefully this will be fixed in iOS 4.2... :-S
Regards,
HAL1

Workitem not going to a particular user id

Hi,
I am having a workflow container element APPROVERLIST which stores the ids of the users to whom a particular workitem should go. But for a particular user id , the workitem is not going to that person, rather it is going to some other user ids. I checked if that id has been substituted but that is not the case.
Are there some other areas where I can check exception?
thanks in advance.
Abhishek

Dear all,
I have checked all the above scenarios.
There is no excluded agent existing . The bindings are correct. Let me describe the scenario little bit more in detail.
APPROVERLIST is a workflow container element ( multiline ). This container element is populated in a particular task. This task fetches the user ids from a table and stores it here.
In the next task which is a foreground task, in the "agents" APPROVERLIST is mentioned against EXPRESSION , so this workitem will go to all the users who are in APPROVERLIST.
Agent assignment is maintained correctly. Its not working for one particular id. Is there any place to check this outside the workflow design?
Also I checked the user id, it is existing.
regards,
Abhishek

Preloader not going dissappearing immediately

Similar Messages

Maybe you are looking for