Premiere Elements 10: Disc Menu when I don't want one ...?

Somehow when working on the current project, I accidentally got a Disc Menu. I don't actually want one for the first time out, this is not the final version, I just wanted an auto-play video for now. I will eventually want a menu, but ... is there a way to turn that off?
Thanks in advance ...

Ken
After you work with the AutoPlay option awhile, if you have any questions about it or the disc menus, please do not hesitate to ask.
Just in case add on...if you use Premiere Elements 10 on a computer that uses a NVIDIA Geforce video card/graphics card, you are likely
to run into display problems. The answer is to roll back the card's driver version to about May 2013. (May not be possible if your computer operating
system is Windows 8 or 8.1 64 bit. Please review the following and determine if
any of the information in it applies to you.
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
ATR

Similar Messages

  • Premiere Elements 9 Disc Menu (main/scene)

    I customize an existing template Disc menu (Pan and Zoom) by bringing in my own photo for both main and scene menu.  On the preview I can see the images and they are correct for both main and scene.  However after I burn a DVD, what appears on the DVD disc is the template not the customized graphic that I imported.  Why is Premiere not keeping the changes, although in "preview" mode it shows me the photos that I uploaded not the templated graphics?

    I just did an 18 minute project using  NTSC AVCHD Full HD1080i30 as a
    preset.  Although in past I have used Kids/Nightime Story without realizing
    that it is not HD, this time I selected Entertainment/Broadway which is.  At
    first I tried using a video clip for a background but changed to a frame
    capture.  In either case the results were the same as you can see in the
    att.  I then burned AVCHD using 1920x1080i NTSC and when played on my
    standalone equipment the results were the same as in the att. with poor
    resolution in the menu.  I did no more editing in the menu that change
    button colour as I was only out to address the resolution issue.  In fact I
    got sound in the menu which obviously came from the video clip I tried and
    could have been edited out.  I've not gone through all the templates but few
    offer any customization and even the one I used had curtains in the scene
    menu.  In fact I just tried Kids/Nightime Story again and as you can see the
    resolution is as good as the HD one and in this case the scene menu allows
    complete background change.   
    As you suggest (b) my problems stem from customization which I always did in
    Pin. Studio and my answer to b. would be yes subject to HD resolution in
    menus.
    Regarding your final statement about Adobe Engineers the 2 following
    extractions come from Adobe Employees:
    <http://feedback.photoshop.com/people/satish_ramakrishnan> Satish
    Ramakrishnan (Customer)
    <http://feedback.photoshop.com/photoshop_family/topics/adobe_premiere_elemen
    ts_10_disc_menu_bug#reply_7274125> 3 months ago
    To Bob:
    The videos you are using are definitely 1440x1080. I say this because the
    menu are designed for videos of that resolution. For all other resolutions
    there is a resize that needs to be done and that is the reason the quality
    reduces (drastically). This is an issue we are aware of and will look into
    for the future versions.
    Hi Bob
    As I told you earlier , there are three resolutions available for each menu.
    Two for Standard definition, and one for HD .
    HD menus are designed for 1440x1080 . and SD menus are designed for 720X480
    4:3 and 16:9 .
    When you used 720p clips, loss of quality was evident because resizing was
    taking place.
    But with 1080i, the loss wasn't there as told by you.
    Because images or videos can be resized from large resolution to smaller
    resolution without loss in quality.
    Resizing from small resolution to large resolution will result in loss of
    quality.
    The engineering team are aware of the limitation with menu and are working
    on it Bob.
    Thanks and regards
    Description: Description: cid:[email protected]
    VIPUL VAIBHAV
    TECHNICAL SUPPORT ENGINEER
    DIGITAL VIDEO
    Adobe - Center of Excellence
    Possibly my interpretation is faulty but away back when I experimented with
    9 using Fun the only available template I was told by Adobe on the phone
    that there was a bug.  When I ordered 10 I asked them to confirm that the
    menu issue was rectified. 
    Finally, I appreciate your help and will also appreciate your putting me
    straight on any points you catch.  On the whole this is a good program and I
    stand amazed to see it render almost in playing time, which reflects the
    combination of computer and software.
    Many Thanks

  • Premiere Elements 8 error message when poening a project.

    When I open a project in Premiere Elements 8 I get the following message,  Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save you current project.  I tried to uninstall and reinstall Premiere Elements 8 but I still get the same message. Any idea what is causing it?

    kefaperformance
    Is this a "it worked before but not now" type issue or "it never worked" issue?
    Then the usual drill for those who are running Premiere Elements 8
    a. Are you running Premiere Elements 8 as the 8.0.1 Update?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
    b. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF?
    For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General
    For AutoAnalyzer, see Elements Organizer workspace, Edit Menu/Preferences/AutoAnalyzer Options
    c. Do you have the latest version of QuickTime installed? Are you working from a User Account with Administrative Privileges? Where are the Scratch Disks directed to and how much free space is at that location?
    Then there are the specific questions (some already asked)
    Properties of your source media
    Project Preset
    Computer Resources, including video and audio card driver updates
    Let us start here and then decide what next.
    Thanks.
    ATR
    Add On...if any of your issues involve opening an existing project, you might want to explore the damaged project side of things as per the following Adobe document
    http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html

  • I downloader Adobe premiere Elements 9 because computer crashed.  Don't have serial number anymore.  How do I obtain it?

    I downloaded Adobe premiere Elements 9 because computer crashed.  Don't have serial number anymore.  How do I obtain it?

    tamod
    What computer operating system is involved? I will assume Windows 7, 8, or 8.1 64 bit for now.
    If your Premiere Elements 9 was registered when first installed, the serial number for it may be at Adobe.
    Please go to the Adobe web site http://www.adobe.com, sign in with your Adobe ID and Password, in the Search field type My Products.
    Then follow the My Products link to your products. In the Your Products list find Adobe Premiere Elements 9 and click on it to reveal the serial number.
    After Premiere Elements 9 is installed, remember to download and install the 9.0.1 Update from
    Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
    I have assumed that your program is on a Windows computer.
    We will be watching for your progress.
    ATR

  • Premiere Elements 13 Installer ask to insert a Premiere Elements 13 disc, disc is already in drive

    I have purchased a Premiere Elements 13 download from Adobe and burned it to a DVD. I run the setup.exe from the DVD and the installer starts. I enter the serial number and check the user agreement and continue. The installer proceeds to start and when it gets about 2% through I get prompted to insert a Premiere Elements 13 disc. The disc is already in the DVD drive, that is what I am running. Why am I being prompted to insert a disc and how do I resolve this so the installation can continue?

    Eric Hofacket
    This is not Adobe. Rather user to user forum.
    What computer operating system is involved?
    When the installation stops to ask "insert a Premiere Elements 13 disc", at what phase of the installation are you?
    According to my count the choices might be....
    The install starts showing 4.3 GB size and goes through
    Microsoft Visual C++ 2012 Redistributable Package (x64)
    Sonic
    Elements 13 Organizer
    Microsoft Visual C++ 2010 Redistributable Package (x86)
    Camera Raw 64 bit
    Adobe Premiere Elements 13
      Installation ends with a Sign In.
    One guess might be that something did not get burned to the disc correctly.
    What happens if you install Premiere Elements 13 from the installation files (setup.exe) purchased and downloaded from Adobe direct?
    ATR
    Add On...what exactly got burned to DVD disc....whole Adobe Premiere Elements 13 Folder/PRE13 Folder including its Set-up.exe?

  • Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box  at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

    I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
    If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

    The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
    When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
    But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
    For the example, the values list for the pop-up menu was:
    5
    3
    1
    Choose
    -1
    -3
    -5
    The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
    For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
    Regards,
    Barry

  • Mighty mouse annoyance - brings up contextual menus when I don't want them

    This is a mighty annoyance. For some reason my almighty mouse has decided that every time I click, it's going to present me with a contextual menu which I don't want to see.
    How can I stop this from happening?

    You disable the right-click option by going to System Preferences, clicking on Mouse, and adjusting the appropriate settings. Then just use Control-click to bring up the contexual menu when you need it.

  • My wifi keeps coming on when i don't want it to. How do i disable it and keep it off?

    My wifi keeps coming on when i don't want it to. How do i disable it and keep it off?

    kcquestions,
    That's a very good question! It's important to be on the network you want to be on. How are you turning the wi-fi off? If you go into your settings there should be a wi-fi switch as the second option from the top. If we turn it off there it shouldn't come back on until you tell it to. If you select that and press the menu button (3 dots in the top right corner) you can also turn off "Allow wi-fi scanning" which can help not get notified of them when wi-fi is off.
    AndrewT_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How can I prevent Magic Mouse from scrolling horizontally when I don't want it to?

    I recently purchased a Magic Mouse to go with OS 10.6 Snow Leopard. It's a great mouse but it causes 2 problems:
    If I leave it on "Scroll with interia" in System Preferences/Mouse, it scrolls horizontally when I don't want it to.  Since I mostly work in Word documents, I often lose my place in the document this way. On the other hand, checking "Scroll without inertia" makes vertical scrolling, which I do all the time, a lot harder.
    The mouse seems to cause what I think of as "fractures" in Word documents--words and parts of sentences will disappear or get crunched together , then reappear when I select the place where they vanished.  They also reappear if I scroll vertically to get the problem area off the screen and then return to it. This wastes a lot of time at best; at worst, I'm afraid I'll lose work.  The problem occurred once in a while with a Logitech bluetooth mouse I was using, but not as bad and not all the time.
    I love the mouse's ergonomics and would like to keep it, but if I can't solve this problem, I'll have to return it.  Would be very, very grateful for any tips!  Thanks.

    Always nervous about recommending sites I have no personal experience of.  On the plus side it doesn't relate to any of the bad sites I am familiar with and it appears to be the developer's site ... but there is no contact point for you to ask questions.  You said in your initial post it was to go with Snow Leopard but this version says it is meant for 10.7 and above.   Did you notice that?   I also notice several other references to Word and mouse and one person found the solution lay in the updating of word 2011 to its highest level.   I can offer no more.

  • Why Does Save As-PDF/A reduce file size when I don't want it to?

    I scanned a 4-paged printed card with my Epson Perfection 4490 scanner in order to digitally archive it. Each page is about 5x7 inches, and I scanned at 100 percent. I scanned each page as an individual TIFF image file, at 600 samples per inch.
    I brought each TIFF image file into Photoshop one at a time. I saved each TIFF as a JPEG, at Quality: 8, Baseline ("Standard").
    Then, I brought the JPEG's into Adobe Acrobat Pro to create a 4-paged PDF. Initially, the file size of the saved 4-paged PDF was 5 MB. (Later, I determined the individual JPEG's add up to 5.2 MB.) When saving as PDF/A, the final format that I want to use, the file size was unexpectedly reduced from 5 MB to 2.5 MB.
    What is the reason for the file size being reduced to 2.5 MB? I had already done the compression that I wanted in Photoshop. The PDF was not downsampled. I purposely did not use Optimizer.
    I did a test. This time, in Photoshop, I compressed each TIFF to JPEG, at Quality: 5, Baseline ("Standard"), the Medium setting instead of the High setting. After bringing these JPEG's into Adobe Acrobat Pro, the saved 4-paged PDF was 2.8 MB in size, an expected smaller size. Saving as PDF/A produced a file of 2.6 MB in size, very close to the same size this time, possibly indicating it accepting the Medium quality level.
    Apparently, saving as PDF/A reduces the quality level of JPEG's to Medium quality, when they are of higher quality to begin with. It seems to be designed to optimize even when I don't want it to.

    Here's the Audit Space Usage for the original 5 MB file. It shows the images taking up the majority of the space, as expected:

  • How do I stop the screen from magnifying or zooming in when I don't want it to?

    The screen keeps enlarging when I don't want it to.  How can I turn off this function in Lion?

    There are a few ways to get the screen to "enlarge", so it depends on what you are doing to make it happen.
    For example, on a trackpad you can double-tap (not click) with two fingers to zoom in web pages.  Or you can slide two fingers in a spreading out fashion to zoom in.
    Do you have any notion about what you are doing when the undesired enlarging occurs?
    charlie

  • How do I turn off Firefox checking for updates (I am fed up with Firefox continually asking to update when I don't want to due to previous bad experiences)

    I would like to turn off firefox checking for updates
    I don't want to update due to previous bad experiences with updates (version 4 and version 5)
    I am frustrated by being reminded on a daily basis to update when I don't want to

    Use
    *'''Firefox button -> Options -> |Advanced | -> |Update|''' and uncheck the update option, or opt to ask first.
    * see [[Options window - Advanced panel#w_update-tab]]_update-tab
    * and to downgrade
    **[[installing a previous version of Firefox]]
    ** and the download itself [http://www.mozilla.com/en-US/firefox/all-older.html]
    Also note that currently
    * firefox 3.6 is still supported, and has had recent security updates
    * plans are to continue supporting it despite any comment on the download page
    **(not sure how long for but see https://wiki.mozilla.org/Firefox/Planning/2011-09-07#Questions.2C_Comments.2C_FYI ) confirming continuing support for Firefox 3.6
    * Firefox 3.6 has updated with security fixes, so is I think now 3.6.22 ; but it is NOT currently trying to upgrade its users to the current firefox release (Firefox 6)

  • Why am I always forced to upgrade Firefox when I don't want to?

    I asked this question once b4, & never got a response. Probably because Firefox sucks royally, & they're afraid to answer my question. I'm always forced to upgrade Firefox when I don't want to. I get this stupid little pop-up for 1-4 days saying the new version is available. I ignore it, & without warning upon starting up my computer, Firefox upgrades itself. First of all, I F'ING H8 THAT! Second of all, I WANT TO MAKE THE BLOODY CHOICE WHETHER OR NOT I WANT ANOTHER SUBSTANDARD FIREFOX UPGRADE!! The ONLY reason I stay w/Firefox is that IE sucks even more, & you can't play any Facebook games w/IE. Firefox dev's, I realize I'm just an insignificant user & you don't really care about any of us, but really, must you force us to upgrade? Hmmm, I may just move on over to Chrome.

    You can turn off automatic updates, for details see the "Configuring update options" section of this article - https://support.mozilla.com/kb/Updating+Firefox
    Turning off automatic updates in Chrome is not as easy, it involved editing the registry.

  • When I use the keyboard on my iphone 5, the keyboard takes a mind of its own.  If I press a letter sometimeIs it puts the letter twice.  It puts periods when I don't want it to.  And if I hesitate on a letter it starts erasing everything I just typed.

    When I use the keyboard on my iphone 5, the keyboard takes a mind of its own.  If I press a letter sometimes it puts the letter twice.  It puts periods when I don't want it to and if I hesitate, the keyboard starts erasing everything I just typed.  Is there a setting I need to change to make this go away?

    What user troubleshooting have you tried? The user troubleshooting steps are restart, reset, restore from backup and restore as new. Usually a reset will fix most of the unusual actions by the device.

  • How do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.

    how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.

    If you don't have an icloud account, then icloud is not the thing that's popping up a window.
    If you are being asked to enter a password when accessing itunes, then the problem may be that you have purchased items (apps, songs, etc) on the device that were purchased using a different itunes account than the one you currently have defined on your device. 
    Purchased items are forever associated with the itunes account (the apple ID) that was used to make the purchase.  If you change the ID on the device, you won't be able to update any of them.  You'll have to purchase them again.

Maybe you are looking for