Premiere Elements 12.0 "Gerätefehler"

Kann jemand helfen???
Ich bekomme ständig die Meldung "Gerätefehler", wenn ich meine Bluray erstellen will. Die Codierung läuft ohne Probleme durch. Wenn es zum Brennvorgang kommen soll erscheint diese Meldung. Ich habe es auch schon mit einen virtuellen Brenner versucht. Genau der selbe Effekt. Funktioniert einfach nicht!
Als Dateiausgabe klappt es. Aber als Bluray nicht.
Woran liegt denn das nur ???

Das könnte dir vielleicht weiterhelfen.
Fehlersuche bei Systemfehlern, Abstürze | Brennen von DVDs, Blu-ray Discs | Premiere Elements | Windows

Similar Messages

Warnung beim starten von Premiere Elements. "Kein Datenträger im Laufwerk..."

Hallo,
Ich benutze Adobe Premiere Elements 9 und sehr häufig, wen ich PrE9 starte bekomme ich die Warnung "Es befindet sich kein Datenträger im Laufwerk. Legen Sie einen Datenträger in Laufwerk \Device\Harddisk\DR4 ein." Dann sind da 3 Buttons: "Abbrechen/Wiederholen/Weiter" aber wenn ich auf einen von Ihnen klicke kommt die Warnung nur zurück (in weniger als einer Sekunde). Deswegen kann ich PrE nicht benutzen und das stört wirklich! Ich habe bereits versucht es zu De- bzw. Neuinstallieren doch das hilft alles nichts.
Ich benutze Windows 7 64 Bit.
Mit freundlichen Grüßen
Malte
Bitte helft mir!!

Hallo OldAlf,
erstmal danke das du dich um mein Problem bemüht hast.
Ich habe mittlerweile auch ein ähnliche Möglichkeit/Idee woher diese Meldung kommt. Bei mir ist es so, dass wenn ich in mein internen Cardreader die Karte der Kamera oder auch einfach nur einen USB-Stick stecke, dass dann diese Meldung auftaucht. Herrausziehen oder erneut anschließen bringt dann gar nichts. Man muss den USB/die Karte vom PC trennen und ihn neu starten, damit das Problem und somit die Warnung verschwindet.
Das war meine Lösung zum Problem, welches echt nervig ist. Da man allerdings, wenn diese Meldung auftaucht, weder speicher noch sonst irgendetwas machen kann, habe ich den Intervall der automatische Speicherung etwas herunter gesetzt:
Bearbeiten > Voreinstellung > Automatische Speicherung
Das nervige hierbei ist aber auch, das die Auto. Speicherung erst nach dem 1. manuellen Speicher eintritt.
Malte

PSE-Diashow auf DVD nur mit Adobe Premiere Elements?

Ich habe mit PSE 4.0 eine Diashow größeren Umfangs erstellt, die ich auf DVD brennen will um sie mit dem DVD-Player am Fernseher abzuspielen. Wenn ich aber in der Diashow-Ausgabe auf den Button "auf Datenträger brennen" drücke, erkennt das Programm die eingelegte DVD nicht und es kommt die Meldung ("inkompatible Medien. Legen Sie eine leere CD-R oder CD-RW ein, um die VCD zu brennen). Warum funktioniert das Brennen auf DVD nicht? Jemand hat mir gesagt, dazu wäre das Programm "Adobe Premiere Elements" erforderlich. Kann das sein, dass ich nur, um die Diashow am Fernseher ansehen zu können, diese Programm erwerben muss? Wie ist es bei der neuen Version PSE 5.0?

Du legst einfach ein neues Projekt an dann wirste schon gefragt, wo das gespeichert werden soll. Irgendwie verstehst du da grundsätzlich was falsch.
Mylenium

Premiere Elements 4.0 Probleme beim Exportieren

Hallo liebe Profis,
nun habe ich es endlich geschafft, das Hochzeitsvideo zu schneiden und einen richtig tollen (meinen ersten) Film mit Menü, Kapitel usw. daraus zu machen.
Die Länge des Films beträgt ca. 01:48:00 Stunden.
Ich bin mit Windows XP, Premiere Elements 4.0, einer großen externen 300 GB Festplatte, von der lediglich 40 GB belegt sind und einem Arbeitsspeicher von 1024 MB ausgestattet.
So, nun möchte ich natürlich das Video exportieren und ich dachte erst einmal auf die externe Festplatte, denn ich weiß nicht, wie groß der Film am Ende sein wird und welche DVD ich dafür brauche. Das wäre dann irgendwann mal eine andere Frage.
Das Problem:
Ich kann den Film nicht exportieren. Die Fehlermeldung ist Nicht genügend Speicherplatz auf Laufwerk zum Erstellen von temporären Dateien für den Brennvorgang
Ich exportiere so: Ich geh auf den Reiter Verteilen, dann Datenträger, wähle Ordner 4,7 GB oder auch 8,5 GB, habe beides probiert, dann die Ordnerposition (mein externes Laufwerk), PAL_Widescreen_DolbyDVD und bei der Qualität habe ich schon alles durchprobiert. Die beste wäre natürlich toll, auch bei der niedersten klappt es nicht.
Ich wäre Euch dankbar für Hilfe, ein paar Tipps, Anregungen, Hinweise oder was Euch so einfällt, denn ich weiß erst einmal überhaupt nicht weiter. Die Mühe soll ja auch nicht umsonst gewesen sein....
Bei google und den Foren habe ich mein Problem bisher nicht gefunden. Auch über einen Link, in dem dieses Thema bereits besprochen wurde, würde ich mich sehr freuen.
Danke schon jetzt!
Derya

Hallo Achim,
da du anscheinend häufiger größere Projekte bearbeitest, kannst du mir sicher auch eine Meldung erklären, die mich bei der Neuanlage von Projekten in Premiere Pro CS3 permanent nervt:
Wenn ich versuche Videoclips von meiner Datenpartition zu öffnen, so taucht diese, im Gegensatz zu der Partition mit dem Betriebssystem und den Programmen, nicht in der Liste der Laufwerke auf.
Und zudem erscheint das rotierende bunte Etwas (Mac OS) und schließlich nach einer Ewigkeit die Meldung:
Verbindung fehlgeschlagen. Möglicherweise ist der Server nicht vorhanden oder zurzeit nicht in Betrieb ...
Ich vermute, dass dies eventuell mit den Voreinstellungen - Arbeitslaufwerken zu tun haben könnte. Habe in der Hilfe nachgelesen jedoch keinebefreidigende Antwort dort gefunden.
Gibt es da eine Auflösung? Danke schon mal für einen Tip
Herbert

Kann PSE4 mit Premiere Elements 1 ?

Hallo Leute,
eigentlich wollte ich mir das neue Bundle PSE4+PRE2 zulegen, mein PC mit
Athlon XP unterstützt aber die Systemanforderungen die Premiere Elements 2
(Athlon 64 mit SSE2) benötigt nicht.
Meine Frage nun, arbeitet PSE4 auch mit Premiere Elements 1 zusammen? Dann
würde ich mir wenigstens dieses kaufen!
Gruß Andreas

Guten Tag!,
Zwei Dinge könnten falsch gelaufen sein:
Szenario 1: Windows-Updates könnten in den letzten Tagen stattgefunden haben, was zur Folge hatte, dass der Sniffer nicht in der Lage war die richtigen Eigenschaften des Anzeigegerätes zu erkennen.
Lösung: Entfernen Sie alle kürzlich installierten Windows-Updates und testen Sie dann erneut.
Szenario 2: Anzeigegeräte-Treiber aktualisiert
Lösung:
a. Installieren Sie den früheren Gerätetreiber.
b. Wenn Schritt (a) nicht funktioniert, gehen Sie zu der nVidia-Treiber-Seite und laden Sie den vorletzten Gerätetreiber (nicht den neuesten, gehen Sie eine Version zurück) und installieren Sie diesen. Wenn die Installation beim ersten Mal nicht funktioniert, können Sie dies im Abgesicherten Modus tun.
Vielen Dank!

Adobe premiere Elements 13

Beim öffnen des Programms Fehlermeldung kein Datenträger. Bitte Datenträger einlegen!! Trotz umbenennen der Datei in New Blue Oldfilm.AEX in oldfilm.AEXOLD keine Verbesserung.
Danke

nikolaosy
What computer operating system is your Premiere Elements 13 running on? Have you updated 13 to 13.1 yet using an opened project's Help Menu/Updates? If not, please do that.
Please think again about deleting or disabling the OldFilm.AEX file which is found specially in Windows 7, 8, or 8.1 64 bit
Local Disc C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-ins
Common
NewBlue
and in the NewBlue Folder is the OldFilm.AEX file that you delete or disable by renaming the OldFilm.AEX so that its file name is OldFilm.AEXOLD.
The deletion or disabling of the OldFilm.AEX file has been the answer to the Premiere Elements 13/13.1 No Disc error for essentially all who have reported it. That is why I am asking you to try this suggested solution again. It will be interesting to learn if the 13 to 13.1 Update has any effect on your results.
Please let us know the outcome.
Thank you.
ATR

Is there a way to create and edit a video in portrait mode / 9:16 in Premiere Elements 12 or 13. Playback on an iPhone in portrait position.

I'm editing iPhone app video for posting as the first screen in the Apple app store. Required size for the video is 750:1334, 9:16. I there a way to setup the initial video in portrait mode? Many posts for how to rotate a specific clip, but I need the whole video in portrait position. How to accomplish this? I'm using Windows 7 and Premiere Elements 12 and now 13.

LaurieFrick
Thanks for giving this portrait Edit area monitor shape a look.
I have Windows 7 64 bit and Windows 8.1 64 bit and have done the work using Premiere Elements 12/12.1 on Windows 7 64 bit.
Here is a step by step
Find the DSLR [email protected] file
Local Disk C\Program Files\Adobe\Adobe Premiere Elements 12\Settings\SequencePresets\NTSC\DSLR\1080p\
And, in that 1080p Folder is the DSLR 1080p30@ 29.97.sqpreset file that you seek.
1. Copy the
DSLR 1080p30@ 29.9.sqpreset fileI
and paste it to the computer desktop in a newly created folder named 1920p.
2. Open the 1920p Folder and edit the ..sqpreset file in Notepad.
To do that right click the .sqpreset, and, from the pop up, select Open With and then Notepad.
3. In the Notepad document, you are going to edit in only 2 places for now, switching 1920 and 1080 to 1080 and 1920 at the top and bottom
sections of the Notepad document.
Then go specifically File Menu/Save of the Notepad document and hit Save.
4. At this point, you have the edited.sqpreset file in the 1920p Folder on the computer desktop.
(Change the name of the edited .sqpreset file so that it = DSLR [email protected])
Move the 1920p Folder from there to add it to the 1080p Folder, the location where you found the original .sqpreset file that you edited.
Close out of there.
5. Back in the Premiere Elements 12/12.1, manually set the project preset to the new project preset
6. When you import your 1080 x 1920 9:16 video file into the project and drag it into the Timeline, you should see
Note that there is no orange line over that Timeline content, indicating that you are seeing
the best possible preview of the image.
7. As I wrote before,
But, here is the hang up. If I render the Timeline content to get the best possible preview at the Edit level, the video in the Edit area monitor
squeezes in resulting in black borders to the left and right of the video image on screen.
But, otherwise I found I had no problems editing or exporting, just had to keep away from Timeline rendering for previewing after an edit. Need to find the missing ingredient for 100%.
I will be writing this up in my blog in a more organized fashion including how I got the project preset description in Change Settings to agree with the changes. Probably I will do that in the morning.
ATR

Error message when downloading Adobe Premiere Elements 11

When attempting to download the Adobe Premiere Elements 11 from the cd, I'm getting an error message that reads: "The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again".I'm using a Windows 7 Operating System. When I attempt the download again, I get the same error message.

Curtis Baughman
Many of us have encounted this issue. The problem is not confined to a particular version or computer operating. Many homemade remedies and scientific ones have worked for some and not others. The most recent fix was offered by an ID by the name of Maud Barbara and seems to have been the answer for that user and at least one more.
Maud Barbara's fix can be found at the end of the very long thread on the subject found
http://forums.adobe.com/thread/1121947?start=40&tstart=0
The rough Google Translate went
Hello
I had the same problem as you and I just d have the solution:
go to C / program files (86) / common files/OOBE
Rename OOBE by OLDOOBE
and your problem is resolved
You can reinstall the software
What worked for me in this case was none of the above. How I and others navigated this installation problem is documented in the thread cited.
We look forward to your results to see what turned out to work for you.
Thanks.
ATR

No Disk error in Premiere Elements 13

I am getting the following error: "There is no disk in the drive. Please insert a disk into drive\Device\Harddisk1\DR1." If i click continue about 5 times the box disappears & I can continue working. The same thing occurs at random when i am attempting to do different operations with the same result. I can work within the program, however the constant error message is annoying. I have searched these forums & tried the different methods of uninstalling & reinstalling, deleting the recommended files, & running a Ccleaner. I can't find any other recommendations on this problem. Please help!

Geewiz1955
Premiere Elements 13 on what computer operating system? For now, assuming Windows 7, 8, or 8.1 64 bit.
What is your computer drives arrangement? How many removable drives do you have, and what are their drive letters?
See Computer/Manage/Disc Management.
Reports of the problem that you are describing can be found for Premiere Elements many versions.
Back in 2012, the word was to use Cancel and wait for an answer from Adobe who was working on the problem.
In 2013, the cause and effect seem to target the SmartSound feature....SmartSound feature is gone in Premiere Elements 12 and 13.
Microsoft and some visitors to this forum suggest getting to the core of the problem through drive letter changes for some removable drives.
Did you install Premiere Elements 13 from installation disc or from installation files from online download? I favor the uninstall/ccleaner run through/reinstall with antivirus and firewall(s) approach to getting rid of the issue. But, problems with the same symptoms can (often do) have different causes.
More later.
ATR

No Disk Error for Adobe Premiere Elements 12

I installed Adobe Premiere Elements 12 to my PC. Everytime I load the software, I get this annoying alert saying that there is no disk located error. I can get it to go away if I click on try again a bunch of times, but I want to get rid of this problem. It should NOT be happening. SOME BODY TELL ME WHAT TO DO PLEEAASE!

Blue Mask
Please check out recent thread which sought to solve the disc error message that appears to be similar to what you are reporting
http://forums.adobe.com/message/6246049#6246049
There was no definitive answer. Still waiting for follow up to the latest line of questions in that thread.
Suggestions about this being a long time issue are a bit misleading. In versions of Premiere Elements earlier than 12, there was a SmartSound/Sonicfire Pro 5 feature which appeared to be linked to the disc error message. And, updating SmartSound/Sonicfire Pro 5 was claimed to be the cause and remedy for the disc error message.
http://forums.adobe.com/thread/1300410
However, SmartSound/Sonicfire Pro 5 is no longer a feature in Premiere Elements 12. Premiere Elements 12 does have a Music Score feature, similar in principle to SmartSound soundtracks, but the SmartSound feature is gone in version 12.
Please review that information in the link above and let us know if any of it works for you.
Thank you.
ATR

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

No disk error in Premiere Elements 12 - Smartsound plug-in?

I have a fresh install of Premiere Elements 12 (with 12.1 update) on a new computer and receive the error "There is no disk in the drive. Please insert a disk into drive E:" whenever the program is opened or closed. I can bypass this message by repeatedly clicking "cancel". Windows application logs in event viewer lists a corresponding error message "Activation context generation failed for C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". I confirmed that this file does not exist.
A forum search indicates that installing Smartsound resolves this no-disk error for PrE 11 and earlier but that Smartsound is no longer a feature in PrE 12:
Re: No Disk Error for Adobe Premiere Elements 12
But another other user reported that the no-disk problem went away in PrE 12 after installing Smartsound:
Re: "No Disk" Error (premiere elements 12)
And my event viewer error message indicates that PrE 12 is looking for a Smartsound plug-in which was not included in the installation. (PrE 12 was installed via Dell Digital Delivery and did not include an installation disk.)
So why is PrE 12 looking for a Smartsound plug-in if it is no longer a feature? Any suggestions for suppressing the no-disk error other than installing Smartsound? I'm just getting started in PrE and don't need it right now.
Thanks,
Greg

Thank you for the advice. I tried Han's suggestion of installing Smartsound SonicFire first since it was much quicker than completely reinstalling PrE (which entails many hours of re-downloading on a DSL line for the program & cloud content).
After installing Smartsound, the "SmartSoundAdobePlugin64.prm" file did appear in the C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\ folder. However, it did not resolve the "No Disk" error or the application error logged in Event Viewer. The source of that error is listed as "SideBySide" and Event ID is 33. The full text of the message is as follows:
Activation context generation failed for "C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". Dependent Assembly Microsoft.VC90.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type=" win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.
I did a bit of research and this answer suggests that the error is the result of an incompatibility between the installed version of Microsoft Visual C++ and the version used by the program:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/event-id-33-so urce-side-by-side/ef67e34f-07b2-4d52-a807-f9f81a7c32f8?auth=1
Based on this Microsoft article, it appears that the missing C++ 2008 version 9.0.201022.8 is an IA-64 version while the 9.0.30729.x versions on my machine are x64 versions:
http://support.microsoft.com/kb/973552
This is all way over my head and I may leave well enough alone until I have more time to spare, given that the "no disk" error (which could even be entirely unrelated) is annoying but not crippling.
FWIW, the machine is a Dell XPS8700, Windows 8.1, 64-bit, and PrE was sold by Dell it, bundled with Photoshop Elements.
Greg

"No Disk" Error (premiere elements 12)

When making an Auto Movie in pre12, as soon as i click the next button having selected the theme that I want, I get (No disk in drive D:), but if I eject the empty tray and leave it open all works fine.

Han
It does not make sense.
The SmartSound/Sonicfire Pro 5 feature is gone in Premiere Elements 12 and has been replaced by Music Scores which is in concept like SmartSound but is not SmartSound.
I think that your happening was by chance.
Recently I had a strange No disc situation. Never had one as long as I have been working with Premiere Elements products 4 to 12 over more than 10 years.
I decided to install CONTENT for Premiere Elements 10 on Windows 7 64 bit. After all was done apparently successfully. I started to use the program and went to apply a disc menu. That is when I got hit with the No disc message. I could not get rid of it. The only thing that would allow me to continue in the disc menu location was to insert the Premiere Elements 10 CONTENT disc which seemed unreasonable since all the CONTENT could be seen saved to the computer hard drive where it was supposed to be.
I decided to restart the computer for one reason or another. Immediately after the restart, there was no problem applying the disc menu in Premiere Elements 10. I did not have to work with the Premiere Elements 10 CONTENT disc in the burner tray to get my Premiere Elements 10 disc menus applied.
This one computer before and after this incident had SmartSound programs on it related to many earlier Premiere Elements versions that are on this same computer. So, SmartSound features or files did not appear to be implicated here in this No disc matter.
So I would caution you about a jump to judgment on
but somehow still looking for those smart sound files...
Please consider if there are any alternative explanations for your results.
Thank you.
ATR

Runtime error in Premiere elements?

runtime error in premiere elements

uvagreg11
You will need to supply a lot more information than just "runtime error in premiere elements" in order for us to help you.
1. What version of Premiere Elements are you using and on what computer operating system is it running?
2. What are you using a the project preset for your project? And, what are the properties of the source media that are being used on the Timeline?
3. Is this a "it worked before but now" or "it never worked before" type of problem?
4. What is the description of your computer and its resources?
5. What troubleshooting have you done so far...
a. flushing preferences
b. deactivation, uninstall, reinstall
c. other
The following is an Adobe document on run time error troubleshooting.
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Let us start here and then decide what next based on your details.
Thanks.
ATR
Add On..I did not see SG's post until after I had posted mine.

Installation problem with Adobe Premiere Elements 10

I recently purchased a copy of Premiere Elements 10 (With photoshop elements) and I have come to brick wall in the installation. First off, I have already installed photoshop and its working fine, however when i try install Premiere i get the following message:
"This installation package is not supported by this processor type"
I can confirm that my processor does infact meet the system requirements. It is faster than 2.0 GhZ and does support SSE2.
My exact model is: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06 GhZ. I can can see from the following link that it supports sse2
http://www.cpu-world.com/CPUs/Core_2/Intel-Core%202%20Duo%20E7600%20AT80571PH0833ML%20%28B X80571E7600%20-%20BXC80571E7600%29.html
I am also running Visata 32bit with about 4 GB of ram.
Any Help would be great.
Many Thanks
Chris

This software came with hardware that was other than a PC. Therefore they cant really help me, however i'm trying to download the trial version but my internet connection is less reliable than a plumbers estimate. It may take sometime, if that fails ill have to call T/S, i have a UK based number to call if the trial fails to work. Thank you all for your suggestions so far

Premiere Elements 12.0 "Gerätefehler"

Similar Messages

Maybe you are looking for