Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
Basically I just want to turn one-channel audio into two-channel audio.

25424...
Sure you do not want to give the Fill Left and Fill Right another try?
According to the Adobe document Adobe Premiere Elements Help | Effects reference
Fill Left, Fill Right
The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
From what you wrote, your Premiere Pro video seems to be saying the same.
If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
Audacity: Free Audio Editor and Recorder
And, then import the Audacity edited audio back into Premiere Elements project as source media.
Is the speaker system OK?
We will be watching for your results.
Thanks for the follow up.
ATR

Similar Messages

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do this?

Hi Jessica,
No, the SD slot will not work, you need an ExpressCard/34 slot.
I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it.

Can Premiere Elements NOT re-encode a video file

I want to take 200 HD camcorder files and put them on a Blu-ray disc with a basic menu structure.
I know Premiere Elements can do the menu structure. My question: Is it able to use the video files without re-encoding them? (The source files are 1280x720, H.264/AVC, 29.97fps.) I can't test this using the trial version because it watermarks the video.
If PE can't do it, am I overlooking some simple way of doing Blu-ray menus using the Creative Suite products? I have used Premiere Pro and Encore to author BDs, but that involved setting up every element of the menu structure by hand.

OC Photoworx
Although I cannot give you first hand workings of Premiere Pro CC because I do not use the program (I am strictly an Elements Windows user),
I offer the following Adobe documentation that I found online for Premiere Pro CC features that you seek and that Premiere Elements does not have.
Smart Rendering
https://helpx.adobe.com/premiere-pro/using/smart-rendering.html
CUDA (which Premiere Elements has not supported)
Adobe Premiere Pro CC - Faster Video Editing | NVIDIA
and for a comparison of Premiere Elements vs Premiere Pro CC Disc Menus and burn to Disk..
Premiere Elements (which you probably are fully aware of)
Adobe Premiere Elements Help | Sharing to DVD or Blu-ray Disc.
Premiere Pro's Disc Menus and Burn to Disk
Using Premiere Pro CC & Encore CS6 for Bluray, DVD, and Interactive Video for iPad,ATV, and Mobile HD | DAVTechTable | A…
Adobe Encore * Creating menus
Best wishes with whatever you video editing decisions are.
ATR

Premiere elements 12: how 2 burn video with menu on avchd disk with 1280x720

Hi, I have a source HD video (from TV) in resolution 1280x720/50. In export presets for avchd disk I only can find presets for 1440x1080 and 1920x1080. I'd like to export this video with menus in 1280x720 which is original resolution to AVCHD disk.
How to handle?
Regards, Juergen

Juegen
No version of Premiere Elements lets you produce a DVD disc with or without menus with AVCHD format of 1280 x 720 at 50 progressive frames per second.
The burn to disc, DVD, AVCHD, and Blu-ray are offered as you found them.
You could burn your Premiere Elements 12 Timeline content to a file AVCHD.mp4 (720p50) via Publish+Share/Computer/AVCHD with Presets = MP4 - HD 720p50. And, then burn that file to a DVD disc as data disc if the disc capacity allowed. But you would not have any menus. Disc menus are offered only for burn to disc/burn to folder. And, important, stop markers do not function at playback of the Premiere Elements (any version) AVCHD DVD or Blu-ray disc format on Blu-ray disc.
Please let us know if you need clarification on anything written.
Thank you.
ATR

Premiere Pro CC and missing audio tracks for .mts files

Hello guys,
I used to edit my .mts files with Premiere Pro CC without any issues until yesterday.
Now I import my .mts file (made with a Sony VG900) but Premiere doesn't recognize the audio tracks (that I can hear just fine with VLC).
I tried changing the extension in .m2ts but it didn't work, I also tried reinstalling Premiere but, again, it didn't work and I tried (I was desperate) to install Premiere CS6 just to check if maybe the problem was just about the CC version. Guess what? It didn't work...
I tried also converting the file with Encoder in .mp4 but after the conversion I can't hear the audio with VLC and, of course, it doesn't work on Premiere.
Do you think it's a Premiere issue or a file problem?
I used those same files for other videos (like this one http://www.youtube.com/watch?v=H1X5vsZ-5yI) and I had no problems. Then I updated Premiere, I moved the files in other folder and the problem came to life.
Any idea?
(I'm waiting for my colleague to send me a new mts file just to check if I accidentally damanged the old ones).

A similar problem here..... although......
Take a look at this screenshot
As you will see, the blue marked audio is repeated audio of less than on sec. Certainly not the way it has been recorded.
I think I've got the answer........ (working with Premiere Pro CC, always up to date, Mac OX 10.9.2; Camera: Sony HXR NX3)
1. Don't copy but clone your flash card to the location where to edit on your hard drive. At the same time: alt+click on external flash card, draw it onto your hard drive location.
(or use carbon copy cloner, which I use for backup and transferring avchd files).
2. Don't import regularly via the import dialogue box (cmd-i). Instead: use the mediabrowser browser, locate the map "private" (as often standard named),
3. Via cmd-a (select all): select all videofiles.
4. click right mouse button and select import.
This way, all the video and audio files will be imported.
If however you have alreade re-used your camera flash card for recordings and don't have access to the 'corrupted' files to be imported into your project, you won't be able to solve the problem. You just lost some of the essential data which were not copied onto your Mac.
This solution I found for my problem may well be the one you are looking for........
Another solution might be to convert the compressed avchd - before importing into your project - into uncompressed .mov filed. However...... you will lose data so this is not exactly what I would prefer if the former described workflow does fix the problem for you.
Please let me know if this works for you or not.
Good luck!
Regards,
Peter

Hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help :)

hey guys ! I use logic pro ... not logic proX ... and i want to record my drums with 4 mics. I got a mixer with also 4 inputs ( Behringer Xenyx QX 1202USB ) But in my Logic i can't take the third input !?!? i can only choose 1 and 2 .... Please Help

Friedrich sp wrote:
Can you send me a mixer wich can do that, please ?
Who do you think I am? Santa Claus?
What you need is not a mixer, but an audio interface with at least 4 mic inputs. There is a lot of choice there, but you should indicate a budget. You can go from, say, € 300 to € thousands, if you want.
Roland UA 1010
Focusrite Scarlett 18i8
However, there are other options (like multi-out mixer plus multi in interface, or standalone mic preamps plus interface with 4 inputs, etc). I have little experience using these however so I really cannot say much about which one(s) to get. The two mentioned above both have four mic preamps, but they are by no means the only way to do it.
The cheapest solution I can think of is to get a second 1204USB, plug it in, and in OS X create an Aggregate device (=the two are being merged into 'one virtual' interface with two discrete stereo (= four discrete mono) inputs. Disadvantage: you keep the same (limited) soundquality of the 16 bits convertors. Getting any of the interfaces mentioned earlier will also mean you'll make the significant step up from 16 to 24 bits sound.

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

How do I get premiere elements 13 to read the video of my .mov files?

I am working on a PC. How do I get premiere elements 13 to read the video of my .mov files? I hear the audio but don't see any video.Thank you.

phyllism
Thanks for the reply. Glad that QuickTime install resolved the Premiere Elements 13/13.1 video playback problem.
When you double click any of the thumbnails for your .mov file in the Elements Organizer 13/13.1, does the Elements Organizer 13/13.1's player open to play back the .mov file contents for both video and audio?
You wrote
in the browser, the preview is an audio file, not a QT preview.
I was not sure if you were just going by what appears in the thumbnail, namely film strip with music note, or whether you had gone through the actual playback there. In the Apple Pro Res footage that I have, I get the same thumbnails that you are seeing for Windows Explorer. In Elements Organizer 13/13.1, the thumbnail for my Apple Pro Res file is just a film strip on gray.
I think what you are seeing is "normal" for the situation. But, please verify your observation with 13 updated to 13.1 if you have not done that already.
Thanks.
ATR

Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M

Premiere Elements 10 - Is Mercury Engine compatible with Graphic Card Nvidia GeForce GTX 560M?
I do not see this card listed on the Adobe products page http://kb2.adobe.com/cps/873/cpsid_87347.html but am hoping someone who is more computer savy at Adobe or Nvidia or somewhere else can advise me.
I'm looking to purchase a laptop with the subject graphics card.
Rob

>Will CS5.5
http://forums.adobe.com/community/premiere/premierepro_current
See link in my answer yesterday... also...
For a list of supported nVidia CUDA cards go to the FAQ
First read http://forums.adobe.com/thread/773101
PPro Video FAQ http://www.video2brain.com/en/products-118.htm
http://forums.adobe.com/community/premiere/premierepro_current/cs5_faq_sheet
Quadro cards compared http://forums.adobe.com/thread/910140

Is there any way i can record a video with 2 audio sources?

I want to be able to record a video with 2 audio sources (1 being a mic and the other being a guitar, both plugged in by usb's) while recording myself playing at the same time. I usually use an aucoustic but the sound is obviously much better when i plug straight in, is there any way i can do this without recording everything seperate? Im using a macbook pro.

Are you looking to do post recording adjustments to the separate tracks? That really determines now you do this.
If you not looking for multitrack recording (you just want to combine the two signal into one and record that) then probably the easiest thing to do would be to get an external mixer that would accept multiple inputs and output as USB . Then you could set the levels with the mixer and just worry about recording the one signal.
You could try using the MIDI Audio Setup app to create an aggregate device (one that will accept multiple inputs).
There is also the 3rd party app Soundflower. It's an app that takes audio signals and allows you to route them between apps and to combine audio signals. It is dated but still works in 10.8
regards

How can I record a video with LAbview?

Hi,
I have a question: How can I record a video with labview?
I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser.
And I would to acquire the video in labview.
Could someone help me?
Thanks
Raf

Unfortunately I haven't any experience with this camera. Iguess, you should install API, then crete new VI, place ActiveX container (palette Container->ActiveX) on the Front Panel, then right mouse click, then choose Insert ActiveX object..., then found you camera object and select it and press OK. Then you probably can see image from the on the front panel. Also probably you will be able to get image data in array (how easy is it - depends from the camera API).
If you able to see image from camera in the Internet Explorer, then another method - you can put Microsoft Web Browser as ActiveX object, then you should also see the image. Disadvantage of this method - you will be not able to get image data.
Andrey.

Recording streaming videos with sound

Can I use quicktime for recording streaming videos with sound? If not which Apple software can do it?
Bye Christof

You can use Quicktime to record streaming video +with it's audio+ by using a very simple trick. Using the same cable you connect your iPod/iPhone to your car's stereo system, connect your Mac's Audio OUT to its MIKE IN jack. I used FILE / OPEN URL to select the video stream source, then selected FILE / NEW SCREEN RECORDING. In the resulting 'Screen Recording' dialog box, I set the AUDIO slider all the way to the right, and under the arrow to the right, selected "Built-in Input Line In" for the microphone. I then used the appropriate controls to play the stream and record it. The resultant file was very acceptable. Good luck.

Premiere Elements not working

When starting, it reports Organiser Database missing or corrupt. When trying to create a new database, Adobe crashes and ends.
Any suggestions?

Hi AT,
You mentioning the psa.prf file helped me in googling the steps you mentioned for other users on the forum, so thanks for that.
Also your direct download link was helpful, as the package is not able to update from the help/update function.
Any idea why the update functionality is not working properly?
I still need another update for camera raw, for both photoshop and premiere. I found links for direct dowloads for versions 6.5 and 6.6. Also the direct links end in a crash, see attachment.
Do you have suggestions?
Regards,
Henk
Verzonden met Windows Mail
Van: A.T. Romano
Verzonden: woensdag 24 december 2014 23:58
Aan: Henk Thomassen
Premiere Elements not working
created by A.T. Romano in Premiere Elements - View the full discussion
HenkThomassen
Great news. Great job in working through the details to get to the solution.
I was waiting for more information from you so that I could give you version specific information on the how to.
But you seemed to have found the paths needed without supplemental instructions.
The two major troubleshooting tools that I would use when the Elements Organizer is involved
a. delete the psa.prf file
and/or
b. create a new catalog.
Best wishes as you move forward in your Premiere Elements 9.0/9.0.1 projects.
By the way, if you are not working from the 9.0.1 Update, good idea to do that.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
You can do that update with the program closed....do not bother with Help Menu/Update for this update. Use the link instead.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7042643#7042643 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7042643#7042643
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Webcam in W530 - Is it possible to record a video with it?

I have just boight my first Lenovo - a W530 Thinkpad notebook.
The integrated camera works well... but I can ONLY take picture with it.
Is it possible to record some video with the camera? Do I need to install any software or driver?
Thanks in advance,
Carlo
- Win7 64bit
Solved!
Go to Solution.

Hi Carlo,
You just did what I was supposed to suggest you in my very next post. Bravo!
Nice to hear that your issue got resolved. Please feel free to post back in Lenovo Community Forums if you have any further queries!
Cheers!
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

TS1544 I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get

I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...

First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

Similar Messages

Maybe you are looking for