Premiere pro cs6 - upper fields farse

OK so FCP 7 works fine with pro res 422 HQ normal and light. Premiere does not. Upper field settings imported straight into the sequence at first look fine. View it on a crt preview monitor through a video board (exactly the same way as FCP) and what an awful looking picture it is!
Reversing the field settings cures this effect but hey! (having to render the footage though is not slick in a fast paced working environment) when exporting the footage to mpeg2 for dvd creation in studio pro - guess what! ....the interlacing problem is back again!
So come on guys - will someone actually answer the question. Have I wasted several days and money trying to move to Premiere CS6 (almost on CC but holding fire on that one!).
It's just like premiere does not see the upper field settings in the native pro res footage. And I've tried all sorts of configurations to cure the problem. The only way I found was to export the XML files to FCP7 and work with the project on there. And seeing as I'm trying to get away from FCP this isn't ideal.
So come on tech heads from either atomos or planet earth. Lots of other people have had this problem but no one seems to get a proper answer.
This problem occurs on both my mac pro tower running Lion and on my macbook pro running mountain Lion. Also occurs when viewing through both my canopus ADVC 300 board and directly to my Sony GV-HD700. So it's obvious it's not a board issue but software related. The filming was produced on a canon XL H1 onto an Atomos Samurai using the pro res 422 DV wide screen setting.
Again I reiterate that this problem does not occur in FCP7!!!!

On a PC, the solution is simple - on a MAC it may not be the same.
Highlight the files in the project panel. R click, and select Modify in the drop down menu which appears.
Select Interpret Footage, then go to Field Order in the new panel which appears.  Select "conform to ..." whatever is correct for your clips.
I imagine that MACs have no R click, but the drop down menu should be accessible by some equivalent procedure.

Similar Messages

  • Farsi Titles in Premiere Pro CS6

    I've seen a few posts that seem to be relevant but offer no conclusion about how to create Farsi subtitles in premiere pro CS6. I've seen many posts about persian font being reversed in adobe software, so that might be my next problem.
    Adobe phone support offers no suggestions.
    Any help would be appreciated.
    Thank you.

    Thanks but no cigar, Joe Bloe. Shortly after post #9 is post #14 in which they conclude that it's not possible to work with arabic subtitles in premiere pro. Adobe tech support was also not able to point them in the right direction.
    Here's the conclusion of that thread :
    14.Kusumas,Feb 28, 2013 9:01 AM   in reply to Alan Craven 
    Thanks Alan, Sorry I took a while to repsond - I've just spent 1 hour 18 minutes on the phone with Adobe (their bill).Turns out that what I am asking for is altogether impossible in CS5 (Premiere, PhotoShop Indesign etc.). It is also not possible in PPro CS6 but is possible in Photoshop CS6. So they suggested I spend just short of $1,000 upgrading my Master Collection CS5 to CS6! Other than that, they had no solution for me. On another forum someone suggested importing a .pdf to Photoshop and importing crops of that image into PPro. It works but my word it's laborious! Your suggestion might well work (you are a genius so it's likely) but I do not read Arabic and would not recognise a non-proportional Arabic font if it turned up in my Aphabetti Spaghetti! So, thanks for your input - I'm now a day behind schedule so I'm going to go the PDF / Photoshop route. Wish me luck.
    15.Alan Craven,   Feb 28, 2013 9:53 AM   in reply to Kusumas 
    Sorry I can't help any further, but my exposure to Arabic is zero too - just a flight from the UK to New Zealand and back via Dubai on Emirates.  I had about enough exposure to the safety video in Arabic to recognise some of the spiel in Arabic by the end of the reurn flight!
    My dodge with highlighting just the widely spaced characters and turning down (i.e. making nearer to zero), the kerning for those characters alone works for I's etc in English, but I haven't tried it with Arabic.
    Good luck, and I hope your patience holds out.

  • Premiere Pro CS6 very bad YouTube quality.

    Hello,
    Before asking me to look further on google because there may be my answer, i say that i've searched/posted/asked everywhere i could.
    I use fraps to record some in-game footages, the file bitrates are huge 500-900M, i then render them in premiere pro as i need to add an intro/ending and then i upload them (or i'm hardly trying to) on youtube.
    The thing is I've used every setting I could ever find, contacted youtube users who managed to do it right, but after I upload the video on youtube, the quality is absolutely horrible.
    Right after i render i check the video, the quality is perfect, after that I upload it to youtube and after processing the video, it looks like it has 1M bitrate, laggy.
    Can anyone please help me to solve this problem?
    Thanks!
    RAW clip bitrate: 500-900M
    Render settings from Premiere Pro CS6:
    Format: H264
    Resolution: 1280x720
    Frames per second: 30
    Field Order: Progressive
    Aspect: Square Pixels (1.0)
    TV Standard: NTSC
    Profile: High
    Level: 5.1
    Render at Maximum depth: Checked
    Bitrate settings:
    Encoding: VBR, 2 pass
    Maximum bitrate: 20M
    Minimum bitrate: 20M
    (Tried with smaller bitrates too, like 8/10/15, the output file wasnt so clear but youtube would still kill it)

    OK. Here is what I have done.
    I took took your crisp video of game play and dropped it on the New Item button to create a sequence. I checked the sequence and saw that the video was 1280X720 using 30 frames per second. Not 29.97, but 30. That could be relevant.
    Then I took this screen shot of the video playing in Windows Media Player and in the Program Monitor of Premiere Pro. I see some degradation even at 30Mb/s which suprised me to be honest with you.  I read through the YouTube help and they recommed 30Mb/s for 720p so I exported at 30Mb/s.
    The easiest place to spot the degradation is in the space above the letter E (before the CK) in the upper left of the frame. Some of the texture is missing.Not much. It is ever so much softer. But I don't believe that it will prove to be relevant.
    So, now it is time to upload to YouTube and see what happens.
    Darn, I have no way to play the YouTube video at exactly 1280X720. I just have full screen and the larger box.  Is there a way to do that? Other than setting my monitor for 720p or playing it on an old HDTV?
    Oh well, here it is. Reasonably clean going in. How about coming out? Not so much. I am not happy with it. I am going to try again using CBR just for the heck of it. Crud. That didn't help. See for yourself.
    I am stumped. Somebody with the capability to see it at the exact size speak up please. How is it done. (I use Chrome.)
    Edit: I found a YouTube resizer that sets the medium box bigger - to 1280X720. I knew it had to be possible. But I am certainly not happy with the changes YouTube makes to a 30Mb/s file.
    I am off to go try Vimeo.
    Edit:
    I am not happy with this either.
    There is something about this video that makes it difficult for them to encode it. I have no idea what it might be. Perhaps the more technical among us can provide answers. It is not horrible, and it is better than 480p, but it isn't great.

  • Export Media in Premiere Pro CS6 ONLY produces an Audio File in Media Encoder

    First, all the system info:
    Windows 7 Home Premium Service Pack 1
    Intel HD Graphics 3000 Display Adapter
    I’m using Premiere Pro CS6 Version 6.0.5 (001  (MC: 264587)) “Mighty Kilt”
    Version 6.0.3.1 (64 Bit) of Adobe Media Encoder CS6
    Other Adobe applications installed: AIR, Creative Cloud, Download Assistant, Encore CS6 Library, Flash Player 12 ActiveX, Flash Player 12 Plugin, Help Manager, Premiere Pro CS6, Premiere Pro CS6 Functional Content, Reader XI
    I’ve run check for updates on both Premiere Pro and Media Encoder and everything is up to date
    I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
    I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
    I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
    Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments at lower quality levels as needed so everything would fit on the discs.
    The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
    I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem for the last several months.
    But now, two things happen:
    1) AME automatically designates the "Output File" with an .aac extension (see attached)
    2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
    Huh?
    Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
    Format: MPEG2-DVD
    Preset: NTSC Widescreen High Quality
    Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
    BOTH the "Export Video" and "Export Audio" boxes are checked (see attached screen print)
    Filters Tab: left as is, don't do anything here
    Multiplexer Tab:
    choose the "DVD" button (vs the "None" button)
    Bitrate Type: left as Variable which is what is selected as a default
    Video Tab:
    Codec: Reads MainConcept MPEG Video
    Quality: increase it to the max of 5
    TV Standard: NTSC
    Frame Rate: 29.97
    Field Order: None (Progressive)
    Pixel Aspect Ration: Widescreen 16:9
    Render at Maximum Depth box checked
    Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
    Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
    Audio Tab:
    Audio Format: Dolby Digital
    Codec: Dolby Digital
    Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
    I check the "Use Maximum Render Quality" box
    I chose "Queue" for everything and then let it run overnight
    And yes, the original media has BOTH a video track and an audio track that works (see Screenprint)
    So... what am I doing wrong, helpful experts????

    Larry, Mark, Jim & Bill -
    It is 1 am Tuesday morning and I'd do a primal scream if my family weren't all sleeping upstairs.
    Somewhere along the way, I either read or was given the advice to just skip AME, load my videos as timelines in Encore, and just do the transcoding there.
    I spent almost a day trying to figure out how to get "buttons" for my menus I was building (they weren't appearing in Encore's library like they should) and eventually found a simply workaround.
    So I then spent the last 24 hours or so building all my menus, creating small clips for my "motion menu" buttons, getting all that straightened away.
    Got really excited earlier tonight since it seemed like I was nearly finished and coming down the home stretch.
    I hit "build" in Encore, went away for a couple hours, and came back to find a big error message awaiting me telling me that "Encoding Failed."
    I have read a lot of posts, and the outlook is not good, or at least the possible solution not simple or short from a time perspective.
    I have a 100 families awaiting their DVD they've paid for that they initially were told they'd have by mid-February. I've been telling everybody that they would have it - guaranteed - by this weekend when there's a band festival that would be ideal for distribution. The DVD duplication company says they have to have it by Wed morning at the absolute latest. Meaning I've got about 24 hours to figure this out and burn my dual-layer masters of the two DVDs or once again tell people "I know I guaranteed you'd have it by this weekend, but I don't have it ready yet."
    Almost as importantly, I can't afford to keep spending the hours and hours and hours on this that I have. It's impacting my personal and professional life.
    Thus the primal scream.
    The posts I read about the encoding failure all pretty much advise that I use AME to do all the transcoding work. Which of course brings me squarely back to my original problem: I cannot get a video file out of AME.
    I'm embedding a screenshot of what I see when I click on the pull-down menu in the AME dialogue window. The problem: there is no MPEG2-DVD option listed to be chosen.
    Although I'm relatively new to forums, I've read enough posts by now that it seems like most people are in crisis mode when they post. So I realize my situation is not all that unique. But from a newbie rookie in the field to you experts, I REALLY could use some assistance right now, because between this and the long, cold winter we've had, I'm about to lose it.  :-)
    P.S. Mark, in answer to your question about frame rates, I have 18 different videos/films/projects that I'm including in my two DVD-set. There have probably been nearly 6-7 different cameras that have contributed footage to one or more of those films by borrowing camcorders of different brands and types and quality levels from people. Nearly every one of those 18 films have multi-camera sequences in them. And many films are collections of sequences which themselves are "nested sequences" sometimes three deep.  In otherwords, there is no way I can tell you all the various frame rates that may be represented among these 18 separate projects and I certainly can't go back and hope to change them all to the same one.
    Help. Please.  :-)

  • Can choose 5.1 in Audition CS6 for monitoring, but not in Premiere Pro CS6

    System: Z820, Win 7  Ultimate x64
    Audio: Creative SoundBlaster Recon3D PCIe, Altec Lansing 5.1 speaker system
    SW: Master Collection CS6
    I've been using Premiere Pro CS6 for a while now, but only for stereo video projects. I recently started working on a short film and needed 5.1 Surround Sound as well. I created a 5.1 surround track in Au, and have been able to monitor the sound and surround panning effects in Au during development. Here are the Audio and Channel Mapping settings I used to get my 5.1 to work so I could monitor it:
    As can be seen, I've chosen the default MME Device Class here, and all seems well. I have 6 channels identified and mapped to the right corners. I've also confirmed my Master Track in Au is 5.1 Surround. I exported a 5.1 WAV and imported it into Pr, into a 5.1 surround session, confirming that both the track where the WAV file landed and the Master are both 6 channels (and although the order is displayed differently, the content correctly mapped from Au into Pr).
    Now, my fun began. When I monitor the audio in Pr, I hear only Stereo. So, I check my channel mapping in Pr, as shown below:
    As can be seen here as well, I've chosen the 'default' Premiere Pro WDM Sound. I've learned that WDM is a newer version of MME and encapsulates all the functionality of MME. I'm not sure why Au uses MME and Pr uses WDM. However, as shown, with WDM chosen, I only have 2 channels in the mapping dialog to work with, not the 6 I have (and had in Au). Nothing I can do will produce those other four channels.
    As seen in the drop down captured in the above screen grab, I also have ASIO4ALL installed, but that too only shows 2 channels in both Pr and Au. Interestingly, when I hover the mouse over the speaker selection in the ASIO4ALL control panel, it only indicates there are 2 channels (but indicates that there are 6 INPUT channels). The Creative SBZ Series ASIO option is no better, providing only 2 channels.
    So, I was off to check my system settings, which are all shown below:
    As seen above, Windows knows there is 5.1 surround on the system, and the Test available  in the bottom left dialog proves that each speaker is configured and working correctly. Audition also knows there is 5.1 available on my system and uses it correctly as described earlier. However, Pr refuses to recognize this and as a result I am unable to monitor any 5.1 surround projects on my system. If neither Au nor Pr worked, then I'd mark it down as Sound Card or Driver issues, but since one Adobe product uses the system audio correctly, and the other doesn't, it leads me to believe that it is Pr who is at fault.
    So, my question is this: Why won't Pr recognize my 6 output channels like Au does?
    Any advice would be appreciated.
    Cheers,
    Shane

    ryclark, I believe you are correct in that Au uses MME while Pr uses WDM, but both MME and WDM (which, according to the Microsoft specification, encapsulates ALL of the MME capabilities, and expands on them) are 5.1 capable. I can play my export from Au as a 6 channel interleaved WAV file as well as an AC3 conversion  of that same file in both VLC and Windows Media Player and get the same 5.1 channel surround sound field I do from Au.
    After more research, I'm beginning to think this might be a result of the fact that Pr is 64 bit and Au is still 32 bit in CS5.5 and 6. I don't know if Au CC is 64 bit, but if it is, I'd be interested to know if what I am seeing is reproducible in the CC versions of Pr and Au (to eliminate the 64 bit vs 32 bit argument). Some have suggested that perhaps the standard SB driver is only 32 bit, although it 'supports' 64 bit supposedly, but maybe Pr just can't handle that 32 (faux 64) bit driver. A possibility.
    Thanks for the read and response. Seems lots of people are in this boat together. You have recommended elsewhere to use an external audio interface, but just to do 5.1 monitoring (I don't do any live recording to my PC, this if for movie sound post/mixing) sounds pretty clunky. At the least, I think I'd need not only an external audio device with at least 6 channels out, but a receiver to take those outputs, and 6 new audio speakers to connect to that AVR. I currently use my computer's soundcard, as you know, and your standard 5.1 powered computer speaker system attached to that. Not the best, I know, but at this point, I'm just going for surround, but THX, so it is sufficient ;-).
    Cheers,
    Shane

  • Premiere Pro CS6 H264 Blu-ray encoder does not do MBAFF interlace

    I have been testing the Premiere Pro CS6 H264 Blu-ray encoder with some HDV video 1440x1080i25 top field first and I have found that it always encodes as PAFF even when the MBAFF box is ticked. I analysed the stream with h264_parse and found that the mb_adaptive_frame_field_flag is set to 0 and that the pic_struct flag alternates between 1 and 2. These indicate that the encoder is using PAFF when the MBAFF flag is ticked.
    The CS5 encoder does work as it sets the mb_adaptive_frame_field to 1 and the pic_struct to 3 which is correct for top field first.
    There is another problem in that Premier pro does not recognise field order of correctly encoded MBAFF video. It reports tff video as progresive and bff as top top field first.
    MBAFF generaly gives higher quality pictures.
    Regards Trevor

    For obvious reasons I do not like to be constanly connected to the internet with my Video Edting PC.
    There are no 'obvious' reasons not to stay connected (if you know what you're doing), and in fact very good reasons to do so (more so if you're a Creative Cloud subscriber).
    Having said that, there is a way to get the PDF to come up when you hit F1, instead of the online help.  I just don't recall where that setting is.

  • Why Do I get Choppy Playback in Premiere Pro CS6

    Before upgrading from CS5.5 to CS6 I wiped my computer and started from scratch. When editing 4 angles in CS5.5 I never had any problems with playback... even after adding titles, effects..
    In CS6 I have my 4 files set into a multicam sequence but when I play back and start cutting from cam to cam it gets choppy.
    I am running:
    Windows 7 64bit
    On a Dell Studio XPS 9100
    Intel Core i7 930 @ 2.80GHz
    12.0 GB Ram
    ATI Radeon HD 5800
    I have my memory preferences in PR set to 12 GB Installed, Ram for other aps = 3 Ram fpr PR 9GB, and it set to performance
    Any help to speed up and render this proper would be great, Still have to add color correction, titles, logo.

    The 1st update came out today. Downloading now. Looks like it should fix my old problems... fingers crossed
    What's new in Adobe Premiere Pro CS6 6.0.1:
    May 26th, 2012
    Features added or changed in this update:
    · Improved performance using OpenCL, especially when used on Mac OSX v10.7.4 or later.
    · Added encoding presets with additional bit-rate settings for XDCAM HD.
    · Added Automatic Peak File Generation preference in the Audio category for turning off automatic peak file generation for imported audio. By default, this preference is enabled and matches the behavior of Premiere Pro CS6 (6.0.0).
    · When this preference is disabled, importing audio or opening projects will not cause peak files to be generated. If peak files were already generated, then waveforms will be visible. Files imported before the preference was disabled will continue to generate peak files.
    · Enabled “smart rendering” and added Enable Smart Rendering Codec setting to the Video tab of the MXF OP1a exporters for XDCAM HD and XDCAM EX to enable or disable smart rendering for these formats. This option defaults to the off/disabled state. We’ll have more information about this feature in a post on this blog within a day.
    Bugs fixed in this update:
    · Start timecode was not imported or exported correctly when working with AAF files.
    · Some files from the Canon 5D Mark III camera were imported with the wrong timecode.
    · Playing/viewing waveforms in the Source Monitor caused audio dropouts with some XDCAM HD clips.
    · NTSC MXF OP1a files that were exported with drop-frame timecode had video data that was tagged as non-drop-frame.
    · Switching the Renderer project setting from Mercury Playback Engine Software Only to Mercury Playback Acceleration GPU Acceleration on a computer using OpenCL caused Premiere Pro to crash under some circumstances. Switching between the two settings on a computer using CUDA would in some cases cause problems with video and/or audio playback.
    · Crash when using full-screen, cinema mode on some computer systems.
    · Tape capture was not working correctly with some third-party systems.
    · Crash when capturing from tape using some BlackMagic hardware.
    · An extra, black frame was included at the end of the output when exporting to P2 MXF in some circumstances.
    · First two frames were being played twice on external monitor using Matrox MXO2.
    · Crash when using “hover scrub” with Matrox MXO2.
    · Audio/video synchronization was off by a few frames when playing video on external monitor.
    · The Export Frame button was not exporting the correct frame, instead exporting a frame one or two frames away from the current frame.
    · Some audio files and some MXF files would go offline or have their audio reconformed when the project was re-opened or when Premiere Pro was minimized or lost focus.
    · Crash when modifying an effect property while playback was occurring.
    · Hang/freeze when using a dissolve transition on an adjustment layer.
    · Dropped frames and audio/video synchronization issues when exporting to tape using some third-party hardware.
    · Information about dropped frames on output to tape was not accessible to third-party systems.
    · Some QuickTime files were imported with the wrong field order.
    · When audio was sent through a Mercury Transmit plug-in, any number of channels that was not 2 or 6 was treated as mono.
    · In HDV editing mode, File > Export > Tape could not be used with third-party hardware.
    · The current-time indicator (playhead) was not returning to the current time after using the Play Around command.
    · Last several frames of output when exporting to tape were black.
    · When encoding a 23.976 fps video to H.264, the duration of the video in the output .m4v file was too short, and audio drifted out of synchronization with the video.
    · Transparency (alpha channel) information from a dynamically linked After Effects composition was rendered incorrectly in Premiere Pro.
    · Importing some QuickTime OP1a files caused Premiere Pro to hang.
    · The duration of the audio track sent to SpeedGrade using the Send To SpeedGrade command was the length of the entire Premiere Pro sequence, not the length of the work area.
    · Timecode written to trimmed clips using the Project Manager did not match the source timecode for some QuickTime files.
    · Various other crashes.

  • Exporting AVCHD for BluRay in Premiere Pro CS6

    Hello,
    I have AVCHD files taken with a HD camcorder at its highest quality settings (HD FX - 1920 x 1080 - 24Mbps - H.264AVC).  I am looking for the most appropritate workflow to edit these in Premiere Pro CS6 and burn them over to BluRay using Encore, while maintaining the original quality of the AVCHD files.  Currently when I import the files into Premiere Pro, and preview the video clips in the sequence, the video appears as it does in the original files.  In PrPro, the properties of the AVCHD files indicate that they are at 29.97 fps, 1920 x 1080, with square pixels (1.0).  However, after exporting the sequence from Premiere Pro (via Media Encorder) to Encore, the video appears to have some jagged edges with some loss of video quality, and I would like to resolve this issue.  For the export settings I am using the H.264 BluRay default settings.  Please provide details on the correct/most appropriate settings that should be used to export the PrPro sequence to Encore with the above mentioned AVCHD files to Encore for recording onto BluRay while maintaining the original file quality.  Thanks.

    Seaspray -  I will let the experts correct any bad advice here and perhaps I am adding nothing you already don't know or are doing.   I recently went through the same exercise being new to PP CS6.   Is that footage interlaced?    I first drug a sample clip to the New Item button to create a matching sequence.    I had some issues when I wasn't being careful about sequence settings matching, particularly putting interlaced in a progressive sequence.   When I was ready to export, I chose the H.264 Blu-ray preset closest to my source footage.   I made sure the key video characteristics matched - frame size, frame rate, progressive vs. interlaced, if the latter upper or lower, PAR, etc. etc.   In some cases I tweaked VBR vs. CBR and bit rates.    I then produced separate .m2v and .wav video/audio files.   Then I imported those files as assets into Encore.   You should then see Encore tell you it does not need to encode the video or audio after analysis.    Unfortunatley, this process does require one encoding, but I don't believe there is anyway around that matter as PP CS6 apparently does not support "smart rendering".   However, I think with just one encoding you are not going to see your footage noticeably degraded.    Agreed, none of the monitors in PP or Encore should be used to judge quality.   I also noticed major differences playing back files on my PC with various media players vs. PS3 + big TV.  

  • What is THE best video file format to import into Premiere Pro CS6?

    What is THE best video file format to import into Premiere Pro CS6? I am tired of the guess work of "this might work if you do this." Just tell me which is, flat out, the easiest for Premiere to read?? I generally animate in Adobe Flash, and some times with a Live camera. Premiere seems to pick and choose which video file it wants. I import from the File drop down box in the upper left hand corner, then move the video file to timeline. Under the "scrubber" there is a thin red, (or when rendered) a green line. The videos I put in the timeline show a thin yellow line which means Premiere is confused. So, in basic terms, which video format is MOST commonly accepted with the least amount of trouble/hassle?

    Premiere has a function now where you can import a clip and drag onto a timeline and it will prompt you with a message about changing the timeline settings to match your clip, (or if there is no timeline it will automatically create one that matches your clip.) This is in CC of course so you might consider upgrading. They have fixed a lot of compatibility issues from CS6 to now. If you don't want to get all of CC for 60/month then you can at least shell out 20/month on premiere. It's worth it. They've made it where you don't have to worry about 99% of all video formats. They just work.

  • Chroma bleeding Premiere Pro CS6

    When I edit interlaced video in Premiere Pro CS6 I get chroma bleeding. It seems that the chrominance information is always taken from the other field. I tested the same video with Premier Pro CS5.5 and this problem was not present there.
    Premiere Pro CS6 version 6.0.3 and Premiere Pro CS5.5 version 5.5.2 was used.
    The footage was taken with Sony HVR-Z1E camera.
    The first row of images are from Premiere Pro CS6 that exhibit chroma bleeding. The second row are the same images but from Premiere Pro CS5.5 that does not exhibit chroma bleeding. The third row are crops of the 1st and 3rd images.
    I believe that this is a software bug and hope that it wil be fixed. But I would also apriciate a workaround from someone who expierences the same problem.

    When I edit interlaced video in Premiere Pro CS6 I get chroma bleeding. It seems that the chrominance information is always taken from the other field. I tested the same video with Premier Pro CS5.5 and this problem was not present there.
    Premiere Pro CS6 version 6.0.3 and Premiere Pro CS5.5 version 5.5.2 was used.
    The footage was taken with Sony HVR-Z1E camera.
    The first row of images are from Premiere Pro CS6 that exhibit chroma bleeding. The second row are the same images but from Premiere Pro CS5.5 that does not exhibit chroma bleeding. The third row are crops of the 1st and 3rd images.
    I believe that this is a software bug and hope that it wil be fixed. But I would also apriciate a workaround from someone who expierences the same problem.

  • Help! I accidentally closed some screens on Adobe Premiere Pro CS6

    So I was messing around with Adobe premiere pro cs6 on my laptop (using touchpad, no mouse), and I went to click File + save, but instead I clicked File + close, and it closed some of the windows on my screen (the upper left one and the bottom left one). Now I can't even view my project. Is there any way to fix this?

    Good morning'
    I downloaded and installed Production premiere CS5 and installed on Surface pro 3 since i missed placed my cd's.
    It's works,but when i try to go to help and update for 5.0.3 its fail to update. I got email from adobe to help and i poosted my cell No.
    so far nobody called me. Thats kind service you geting from ADOBE.
    832-368-7712
    PLease let me know their phone number for tech support.
    Have a good day.
    Thanks,

  • CC wont let me re-download premiere pro CS6! HELP!!

    Hello all,
    So i previously had all of the CS6 Family installed on my computer. Something went wrong with Adobe Encore and it wouldnt open so i uninstalled Premiere Pro and Encore CS6.
    After un-installing i restarted my computer and opened Creative Cloud.
    When looking in the find new apps section to re-download Premiere Pro CS6 i could not find it. I filtered the search and selected previous versions but the only apps it says it has in previous versions in are Bridge, Edge Animate and Gaming SDK.
    I checked in the my apps section to double check it was definitely un-installed. I can see Premiere Pro CC but CS6 is not showing up anywhere!
    Ive tried looking for other links on the adobe website but it just gives me the option to buy a subscription (which i have already payed for) or download the trial.
    Ive looked endlessly on forums for a solution but no joy so far.
    I desperately need to get to the bottom of this as i need Adobe Encore for work.
    PLEASE HELP ME!!!!

    Hi,
    Please uninstall your creative cloud desktop app and re-download it from the below link:-
    Creative Cloud Help | Creative Cloud for desktop
    and then follow the same steps that you have been following.
    Hope that works for you.
    Regards
    Sarthak

  • Premiere Pro CS6 - Project frame won't retain its layout or location between opening and closing?

    I filed this as a bug, but perhaps I'm thinking through this wrong and would like to seek help.
    I'm finding that the Project frame in Premiere Pro CS6 does not retain its layout between opening and closings.
    Here's what I do:
    1) Open a project.
    2) Create several bins and populate them with media. Expand the contents of a bin by clicking the disclosure triangle to the left of the folder.
    3) Undock the Project frame only.
    4) Close the Project frame with Command-W
    5) Use ****-1 to reopen the Project frame.
    Repeat steps 4 and 5. The result is that the Project frame does not remember which bin was open. Furstratingly, it also does not retain which bins were expanded or collapsed.
    And worst of all, it will also open in random areas of the screen. (The expected result is that it would reopen in the same spot of the desktop where you last closed it, no?)
    I'm a big organizer -- tons of footage across many different bins. I open bins, close them, keep some open, close others... easily dozens or hundreds of times during an edit session. I'm beginnging to feel like I'm swatting flies or playing whack-a-mole just to get my bin views correct!
    Or mm I approaching this wrong?

    But really, the real solution for me was to not update Premiere Pro CS6 after a reinstall. The most recent updates just do not like my computer, I guess.
    Figured I should post this solution here in case anyone in the future has this problem. (relevant: xkcd: Wisdom of the Ancients)
    -Sam

  • How can I re touch the model in Premiere PRO CS6?

    Hello !
    I am using Premiere Pro CS6. We are shooting a documentary where i have the host who some pimples, moles etc.
    So How can i retouch it and make perfect ?

    Welcome to the forum.
    One possible treatment, within PrPro would be to do a Track Matte Key, where a little bit of Blur is added. Once, there was a great tutorial on softening blemishes in skin tone, but it is no longer.
    This article covers some of the high-points of the process. The success, and handwork, will depend on how much the host moves about: http://forums.adobe.com/message/4575874#4575874
    Because so much can be Keyframed, and limited via Track Matte Keying, one is limited only by their imagination. I would first Duplicate the Clip, add a bit of Blur to that Duplicate, then limit that Blur to just the facial areas with a Track Matte.
    Good luck,
    Hunt
    PS - Beyond that, there are some neat tools in After Effects, that go beyond.

  • Premiere Pro cs6 - Workspace video pane remains blank when trying to view imported files

    Hello,
    I'm currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it onto the timeline, the preview box where you can review your cut video remains black. Double clicking on the imported file gives the same result. I was initially importing .jpg files (about 300kb size for each) so I tried importing various other image formats - .png, .tiff, etc... I have even imported a movie file into my scene to determine whether the issue was with my content format. With the video, the audio plays fine, but the video remains blank in the preview box. I have tried rendering my workspace and changing my initial project settings, but to no avail. I went into my preferences for Premiere and from what I can determine, everything looks fine.
    I'm running the software on an HP Pavilion, Windows 7 intel i7, 8gb ram, with a nvidia 650M 2GB card. Any help would be greatly appreciated. Thanks!

    Hi,
    Have you tried to change your Video Renderer? It would be under Project > Project Settings > General. Switch the option to Mercury Playback Engine software only and see if it helps.
    Thanks,
    Rameez

Maybe you are looking for