Premiere Pro won't span multiple monitors

Premier Pro CS3
I cannot get the PP app to span multiple monitors. Previously I have used Premiere to span two 22" monitors so I can have a very wide timeline. Now that I have installed CS3, it "takes over" my second monitor as a "Program" monitor and I cannot figure out how to shut it off. It also makes this monitor useless for any other applications that I have open while CS3 is open. Help!

Well, now it's working and I have NO CLUE WHY... perhaps opening and closing Premiere 5 times is required before the videocard gets into the act. In any case, it has just started working and I completed an entire editing sequence with no freaky behavior at all.
I love it when a plan comes together - but it's sure nice to know "why" for next time ocasionally... I did use an older saved sequence as a starting point this time, so perhaps something was corrupted in the "new workspace" that I tried to save.
Now, of course, I'm afraid to ever turn this computer off again, or even close Premiere...
Thanks to all for your help - you will all get a free autographed copy of my next book, "Dual Monitors for Dummies"...

Similar Messages

  • My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled

    My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled and reinstalled it but it will still not open.

    It worked for me, any way we have to do following things now, I have seen this happens becasue of the corrupt dll for Visual C++ packages. if the following thing will not work, I am affraid we have to reinstall the windows 7
    Good Luck
    Try to remove all the Visual C++ 2010 Redistributable and Visual C++ 2008 Redistributable Packages (both x86 and x64) from the Control Panel
    Download and install following Visual C++  Redistributable Packages
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
    Microsoft Visual C++ 2010 SP1 Redistributable Package (x86)
    Microsoft Visual C++ 2010 SP1 Redistributable Package (x64)

  • Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

    Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor.  Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

    Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
    http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
    http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
    https://forums.creativecow.net/thread/205/876064
    (Found using Google search term "adobe premiere pro date modified")

  • Premiere pro won't display or play audio on Mac os 10.9

    premiere pro won't display or play audio on Mac os 10.9; we are uploading AVCHD mts file format video clips from a Canon camcorder. we get message : "Dolby Audio licensing decode restriction."

    next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936

  • Premiere Pro won't play media intermittently in Yosemite

    Hello all,
    I have a Premiere Pro CC 2014 (2014.1 Release, the latest one) installed on Yosemite 10.10.
    It's running on a  Macbook Pro (Early 2011 model) with 16gb of RAM, 512GB SSD, 1TB HDD, AMD Radeon 6750 Card with 1GB of RAM.
    On Mavericks 10.9.5 it all ran perfectly.
    On Yosemite I have intermittent problem with media playing.
    After a restart if I open Premiere Pro and open any of my projects it will say media loaded, however it won't play it. If you hit play nothing happens. The videos won't show either in source window or timeline. Quitting the program results in a hang. I have to force quit the application and than I get an error Premiere Pro encountered a serious error. Upon second program open, the media will work fine and everything will work fine. That's until I turn off the computer or restart it and than it's over again. I have to open the program, force quit it and only than it will work.
    I cleared Premiere's preferences, caches, moved media to a different drive, reinstalled Premiere Pro and even clean installed the operating system. The problem persists.
    What's interesting is that if I open Premiere after a restart and start a NEW project, import the media and start editing, it will work. When I save it and quit and than open the program again it will show the same problem and I'll have to force quit it after which it will work again.
    The only plugin I have is Neat Video 3.6.
    This problem is really annoying and I hope someone can help me solve it out.
    All best,
    Goran

    Hi CopyCatFilms,
    Shouldn't Adobe be the one updating to account for video card driver changes?  I thought that was the benefit of paying monthly? 
    We test all GPUs with current drivers, but new drivers can come out faster than releases of Premiere Pro. Also, we can't update Premiere Pro every time there is a driver update. That would be pretty difficult to pull off. Sorry.
    If not, please advise on which NVIDIA graphics driver will actually work with PrPro. Because this is NOT working. Currently running: CUDA Driver Version: 6.5.45
    Typically, we recommend that you install the latest drivers for your GPU. It sounds like you have done so. Most people are having best success with these drivers on systems running OS X 10.10.2. Are you updated to that version?
    It renders out complete videos with weird pixel bugs across them. 
    When did it start behaving this way? After installing the new drivers? After updating OS X? After updating a Premiere Pro project from Premiere Pro CC 2014.1 (8.1) to Premiere Pro CC 2014.2 (8.2)? We need more info to assist you: FAQ: What information should I provide when asking a question on this forum?
    Not to mention, it crashes 10 times a day...running back to FCPX.
    If you're crashing that many times per day, you should troubleshoot your system with our agents. Contact them M-F 7AM-7PM PST. Ask for the "video queue." You can either chat or get a phone call going: Contact Customer Care
    The other possibility is that by updating OS X, you may have changed the read write permissions of crucial Adobe folders. See this article for an explanation and a potential fix:
    Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    I also recommend the following steps for Mac users having trouble crashing on Mavericks or Yosemite:
    Sign out from Creative Cloud, restart Premiere Pro, then sign in
    Update any GPU drivers
    Trash preferences
    Delete media cache
    Delete preview files
    Remove plug-ins
    If you have AMD GPUs, make sure CUDA is not installed
    Repair permissions
    In Sequence Settings > Video Previews, change the codec to one that matches your footage
    Disconnect any third party hardware
    If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
    Disable App Nap
    Reboot
    Let us know if any of these steps worked for you.
    Thanks,
    Kevin

  • Surface Pro 3, Remote Desktop, multiple monitors, Windows 8.1 DPI scaling issues

    I have been evaluating Surface Pro 3 and once of the attributes is the display. Here is the description of the environment and the remote desktop display issue.
    Surface Pro 3 (Windows 8.1 with latest firmware and Windows updates) has 12 inch built-in screen with native resolution 2160x1440. The Surface is docked and an external monitor (native resolution 1920x1080) is connected to the docking stations. The
    display configuration doesn't allow for different scaling for each monitor, single scaling value is used for multiple monitors. This is an issue as the recommended scaling of 150% is optimal for small built-in screen of Surface but it is not optimal for
    large screens of external monitors. Also this scaling is "inherited" by a remote desktop session which results in objects being too large on the remote desktop sessions or sometimes even blurry/fuzzy.
    Can the blurriness/fuzziness of the remote desktop session be resolved? 
    Z

    Hi Colin,
    Thanks for the response. I installed the latest firmware and patches about a week ago and the scaling issue improved. It is not optimal yet as some graphical elements are still out of proportions but I do not want to spent more resources on this subject
    anymore.
    Best regards,
    Zbysek
    Z

  • Premiere Pro CS4 - Problem with the monitor program.

    Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

    Dear Bill,
    thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
    So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
    And then:
    1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
    2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
    3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
    4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
    5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
    Thanks!

  • Premiere Pro doesn't recognize my monitor resolution.

    My monitor has a 2560 x 1440 Pixel Resolution 27" LCD Display. I just switched from Premiere Pro CS6 to Premiere Pro CC. When I open the program, it says my monitor does not meet the minimum size requirements. It clearly doesn't recognize the high-res display. The video playback looks ragged. How can I fix this?

    Well we need a lot more hardware data.  What GPU? How much VRAM? What driver version?
    What CPU, memory, Mac or PC etc?

  • Premiere Pro Won't Playback Video

    I am using Premiere Pro CC 7.2.1 on an iMac OS X 10.9.
    Any video won't playback in the preview tray or the other tray (top right). Nothing will playback. This was working a few weeks ago, but now nothing plays back. What can I do? I have already tried reinstalling Premiere and I even formatted my iMac, but to no avail.
    Also when I press play, the stop button appears, but when I press it, it doesn't go back to the play button. Please, I need Premiere for work, any ideas?

    Are you using external speakers for playback? I have some Genelec's that plug into the computer via firewire, and occasionally I have the same problem you do. To fix it I unplug the speakers from the computer, plug them back into a different firewire port, then restart the computer. You can test if this is the issue by going to Preferences, Audio Hardware, and then selecting either your headphones or internal speakers. If playback works, then try unplugging/replugging your speakers. 
    It's a hacky fix, but it's worked for me (in fact it worked for this afternoon).

  • Premiere Pro won't save my project

    My project has been working fine up until a while ago when I tried to save it and the loading bar came up but the yellow loader wouldn't move. It won't save my project and when I click cancel the Premiere Pro simply freezes and then I have to force quit. How do I save my project??

    It sounds like you're not doing this correctly. 
    1. CLOSE Premiere Pro entirely.  All projects.  The entire Premiere Pro program.  Close it down.  Completely.  Maybe even restart the computer to make sure that Premiere is NOT running.
    2. Now, Hold down the Shift+Option keys.  Make sure you hold them both down at the same time.  You can hold down Shift, first, or you can hold down Option, first, but whatever you do keep holding them down.  Together.  Keep holding them down.
    3. WHILE  you're STILL holding down the Shift+Option keys, open Premiere Pro.  You can open Premiere Pro any way you wish, just make sure that when you do, you're STILL HOLDING down the Shift AND Option keys.  Keep them held down while Premiere opens.
    When Premiere opens do you see any of your recent projects in the recent projects list?  If you don't, then you've successfully trashed your preferences.

  • Premiere Pro won't Quit or Close a Project (Mac)

    Hello,
    This only affects a specific user account. Premiere Pro CS6 won't quit or close a project--nothing happens. Haven't been able to figure out what the cause is. I've tried blowing away the user's preferences.
    What other local user files does Premiere screw with that could cause this behavior?
    Cheers,
    Casey

    one more thing, this could be helpful if anyone else is running the same problem.
    I found that if you save the encoder queue and close the encoder, then you can close the premiere project without crashing premiere.
    but also found that AE does exactly the same, if you are editing a AE link comp you will need to close and quit after effects before changing premiere project

  • Premiere Pro Won't Update

    I managed to download Premiere Pro on CC but for some reason it won't update. It keeps telling me it is a download issue. help?

    Hi,
    Check this: https://helpx-internal.corp.adobe.com/content/help/en/photoshop/kb/photoshop-cs6-updates-d ont-install.html
    (This applies for all products not only Photoshop)
    Thanks,
    Rameez

  • Premiere Pro won't shut down

    Hi,
    The problem is that Premiere Pro Cs6 won't shut down or close a project and must be force quit. It will also now allow me to open two projects at once (which can happen when one project fails to close.) However, this quickly leads to a crash.
    Does anyone know how to solve this?
    It emerged suddenly, right after fixing a problem with a serial number conlfict for Red Giant Color Suite. We repaired the preferences and reinstalled the Red Giant plug, but then the problem emerged. My feeling is it's related. Some kind of goofed up preferences, but how to fix?
    Thanks for any help.
    Carolyn

    Now I find that out. I upgraded to Maverick after we
    uninstalled/reinstalled. What fresh hell can I look forward to? I'm getting
    to the point where I would rather amputate a body part than update my
    software.
    All joking aside, should I uninstall/reinstall again?
    Right now, my workflow is to save a dated version (save as: name-date)
    before I close the project, which i then do by force quitting. It crashes
    and my file is saved as a recovery.  My theory is that if my recovery file
    gets corrupted, I have the most recent save-as version to go back to. God
    willing and the creek don't rise, I can go on indefinitely this way, no?

  • Adobe Premiere Pro Help | Using the Source Monitor and Program Monitor

    strJiveDescriptionhttp://helpx.adobe.com/premiere-pro/using/source-monitor-program-monitor.html

    Even back in the days of printed manuals, there were often sections, that repeated, as they had application to a few slightly different topics. I always found that better (then), than just having a note to "go to _____ for info on this." Probably used a few extra trees, but one did not have to constantly flip back and forth. Now that we're talking 1's and 0's, I can see where a limited bit of repetition would enhance the flow of knowledge, and understanding, even when hyper-linked.
    Just my observations,
    Hunt

  • Premiere pro Crash with AOC USB Monitor

    I just purchased an AOC 1659FWU USB Monitor. The monitor works fine with AfterFX but when I try to launch Premiere Pro CC It crashes almost instantly. I know that it has something to do with the GPU and how it decides which one to use. I have uninstalled the monitor to trouble shoot it and once I did the program launched fine. Wondering if there are any workarounds or updates for this issue.
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Adobe Premiere Pro.exe
      Application Version: 7.2.2.33
      Application Timestamp: 532c3999
      Fault Module Name: ig75icd64.dll
      Fault Module Version: 10.18.10.3496
      Fault Module Timestamp: 5319f0ea
      Exception Code: c0000005
      Exception Offset: 000000000016861a
      OS Version: 6.1.7601.2.1.0.256.48
      Locale ID: 1033
      Additional Information 1: 2a27
      Additional Information 2: 2a2796b8a8f25c25edaa02cd7f9a7d2c
      Additional Information 3: c663
      Additional Information 4: c6639144cc99799e76f82edec7b83562
    Thanks in advance!

    Hi Ferret Head,
    Please go to premiere pro>preferences>playback
    and check the option for the second monitor under video device.
    Thanks

Maybe you are looking for