Preparation failed in trex when using standard Who's who iview

Hi,
I have encountered a problem with the standard Who's who iview, which makes a simple search in the ume impossible.
All users "preparation fails" with the following error from Trex monitor > Display queue entries:
Document ID: /ume/users/USER.PRIVATE_DATASOURCE.un%3Ar5mas.usr, Return Code: 16040, Return Message: SSL: rc=-40 pse_error, Document Status: Prepration failed, Action: Index, Retry Count: 3.
I'm working on Netweaver '04, stack 9, installed from rapid installer.
Any help is greatly appreciated.
Regards,
Martin
Message was edited by: Martin Søgaard

Just in case anyone happens to stumble across this thread via search, the error 16040 means that your user doesn't have permission to read the PSE it's trying to open. You'll get errors like this in one of your trace files:
[Thr 1224] =================================================
[Thr 1224] = SSL Initialization  on  PC with Windows NT
[Thr 1224] =   (710_REL,Jul 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 1224] =   found SAPCRYPTOLIB  5.5.5C pl36  (Jul  3 2013) MT,[aesni],NB
[Thr 1224] =   current UserID: SAPDOMAIN\SAPServiceSID
[Thr 1224] =   found SECUDIR environment variable
[Thr 1224] =   using SECUDIR=E:\usr\sap\SID\TRX00\sec
[Thr 1224] *** ERROR =>   secudessl_Create_SSL_CTX():  PSE "SAPSSLS.pse" not found! [ssslsecu.c   1354]
[Thr 1224] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 1224]   secude_error 1281 (0x00000501) = "open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned"
[Thr 1224] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 1224] ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in af_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] << ---------- End of Secude-SSL Errorstack ----------
[Thr 1224] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "SAPSSLS.pse" [ssslxxi.c    2278]
[Thr 1224] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 1224] =================================================

Similar Messages

  • Crystal 2011 getting Logon failed IM004 error when using ODBC (RDO)

    I just installed Crystal Reports 2011 on Windows 7 Ultimate SP1.  Sporadically, but way too often (I would estimate about 60% of the time), when I go to set up an ODBC (RDO) connection or refresh an existing report and enter the password, I get the following error:
    Logon failed.
    Details: IM004:[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_Handle_ENV failed
    Other times, it just works, with no changed made.  It seems to work slightly more often when using the SQL Server driver (the one for SQL 2000) as opposed to the SQL Native Client or SQL Server Native Client 10.0 drivers.  But not often enough for that to be the solution.
    I have tested this with a locally installed SQL Server (on the same machine as Crystal Reports) and remote SQL Servers, with SQL 2000, 2005 and 2008.  Same results.
    I have Crystal Reports 2008 installed on the same machine and have not once had this problem.  I have tried using the same ODBC connections I already had from Crystal 2008 with Crystal 2011 and also to create new ones, same results either way.
    Is this a known issue, or is there a switch/setting I need to change to make this work consistently?  I am especially puzzled by the fact that it seems random, I have not been able to find any pattern at all.

    Hi Victoria,
    MS SQL Server 2008 has a client install now, the MDAC/WDAC doesn't install it as MS used to do with all of their OS's. CR also had to update the use of SQL Server 2008 to include the SQLNCLI10 client engine.
    I suggest, if you have not already, install the Native 10 client from either the SQL Server CD or you can download the MSI from MS's site and only use the Native 10 driver.
    MS kind of dropped ODBC and moved to OLE DB. The native client actually uses the OLE DB driver so using ODBC just puts another layer on top of OLE DB anyways. It's more convenient to use ODBC for deploying applications but it can affect performance.
    Anyways, as noted, CR 2011 is still in Ramp up mode so this issue may have been tracked. If not though you can purchase a support case, if it's a bug then you'll get a refund, if it's a limitation in MS then no refund.
    There is [SP 1 for CR 2011|https://smpdl.sap-ag.de/~sapidp/012002523100007683092011E/cr2011sp1.exe] - http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
    Seems to be a problem with that page right now so try again later... and apply SP 1 or wait until it goes GA and test again. If it's still an issue then you can log a case.
    Firefox just got updated and it's failing, IE works though...
    Thanks again
    Don
    Edited by: Don Williams on Jun 22, 2011 8:51 AM

  • E5-00 fails to deblock when used with paired bluet...

    When using the E5 with the Toyota bluetooth carkit, it fails to deblock itself. Answering calls is not a problem as the E5 auto-deblocks upon receiving a call, but dailing via the carkit does not lift the block. As a result, I must first deblock it manually by entering the deblocking code which only solves the problem for a few minutes. Disabling auto-deblocking is not an option, as it would make the data on the phone vulnerable in case the phone would be lost/stolen. (This is about the code-block and not about the unprotected keypad block.) I have succesfully used HTC's and older Nokia's on the same carkit without this problem arising and my E5 software is up to date. Does anyone know how to arrange an auto-deblock when a bluetooth-paired device is being used like a carkit? Thanks!  

    Maybe a silly question, but is the Toyota car kit set as authorised ?
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Obligatory parameter when using standard BAPI

    Hello,
    We are creating a OData service using standard BAPI, BAPI_PO_GETITEMSREL.
    we are getting following error after executing the purchase order collection:
    Kindly help.
    Regards,
    Ajay

    This is the error again:
    Receiver channel 'CC_Contrct_Recivr' for party '', service 'BS_SHD_901' (internal name 'RfcClient[CC_Contrct_Recivr]')
    Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=900, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=337710, jco.client.sysnr=55, jco.client.ashost=172.17.48.55}
    Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=900, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=333333, jco.client.sysnr=55, jco.client.ashost=172.17.48.55}
    Current pool size: 5, maximum pool size : 50

  • Jvm startup fails with error when using large -Xmx value

    I'm running JDK 1.6.0_02-b05 on RHEL5 server. I'm getting error when starting the JVM with large -Xmx value. The host has ample memory to succeed yet it fails. I see this error when I'm starting tomcat with a bunch of options but found that it can be easily reproduced by starting the JVM with -Xmx2048M and -version. So it's this boiled down test case that I've been examining more closely.
    host% free -mt
    total used free shared buffers cached
    Mem: 6084 3084 3000 0 184 1531
    -/+ buffers/cache: 1368 4716
    Swap: 6143 0 6143
    Total: 12228 3084 9144
    Free reveals the host has 6 GB of RAM, approximately half is available. Swap is totally free meaning I should have access to about 9 GB of memory at this point.
    host% java -version
    java version "1.6.0_02"
    Java(TM) SE Runtime Environment (build 1.6.0_02-b05)
    Java HotSpot(TM) Server VM (build 1.6.0_02-b05, mixed mode)
    java -version succeeds
    host% java -Xmx2048M -version
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.
    java -Xmx2048M -version fails. Trace of this reveals mmap call fails.
    mmap2(NULL, 2214592512, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = -1 ENOMEM (Cannot allocate memory)
    Any ideas?

    These are the relevant java options we are using:
    -server -XX:-OmitStackTraceInFastThrow -XX:+PrintClassHistogram -XX:+UseLargePages -Xms6g -Xmx6g -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=128m -XX:MaxPermSize=192m -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+ExplicitGCInvokesConcurrent -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djava.awt.headless=true
    This is a web application that is very dynamic and uses lots of database calls to build pages. We use a large clustered cache to reduce trips to the database. So being able to acces lots of memory is important to our application.
    I'll explain some of the more uncommon options:
    We use the Concurrent Garbage collector to reduce stop the world GC's. Here are the CMS options:
    -XX:+UseConcMarkSweepGC
    -XX:+CMSClassUnloadingEnabled
    -XX:+CMSPermGenSweepingEnabled An explicit coded GC invokes the Concurrent GC instead of the stop the world GC.
    -XX:+ExplicitGCInvokesConcurrentThe default PermSizes where not large enough for our application. So we increased them.
    -XX:PermSize=128m
    -XX:MaxPermSize=192mWe had some exceptions that were omitting their stack traces. This options fixes that problem:
    -XX:-OmitStackTraceInFastThrowWe approximate between 10% to 20% performance improvement with Large Page support. This is an advance feature.
    -XX:+UseLargePagesUseLargePages requires OS level configuration as well. In SUSE10 we configured the OS's hugepages by executing
    echo "vm.nr_hugepages = 3172" >> /etc/sysctl.confand then rebooting. kernel.shmmax may also need to be modified. If you use Large Page be sure to google for complete instructions.
    When we transitioned to 64bit we transitioned from much slower systems having 4GB of ram to much faster machines with 8GB of ram, so I can't answer the question of degraded performance, however with our application, the bigger our cache the better our performance, so if 64bit is slower we more than make up for it being able to access more memory. I bet the performance difference depends on the applications. You should do your own profiling.
    You can run both the 32bit version and the 64bit version on most 64bit OSes. So if there is a significant difference run the version you need for the application. For example if you need the memory use the 64bit version if you don't then use the 32bit version.

  • Popup LOV fails in firefox when using an outer join!!!

    I have a popup lov which contains at least 2 outer joins in my query. The popup renders fine in IE but i get the error message:
    "Popup List of Values query is invalid, a display and a return value are needed, the column names need to be different"
    when launching the popup from Firefox (1.5.0.2)
    Anyone got any idea why this works in IE but fails in Firefox?
    Cheers
    Duncan

    Hello,
    Duncan – If you'll run your example code on SQL*Plus, you'll see that for department "OPERATIONS" there is no returned value. This could happen with outer join. The problem can be with the way FF is interpreting this non-value. I didn't try it my self, but maybe if you'll use display null value with your LOV, it will solve the problem. Another possible option is to use NVL() on the returned value.
    Chris – Some of the Apex team members, like Carl, are using FF as their main browser. There are some compatibility issues with the last version of FF, but from that, to your conclusion of Apex only support IE, there's a long road.
    Regards,
    Arie.

  • Import manager error, when using Standard maps

    Hi,
    I am trying to import data using Import manager statndard Maps.
    For certain maps I am getting the following error message.
    <b>"Unable to retrieve unique values for field 'Key <Clone>'."</b>
    And also after getting this error if I close the current statndard map and open another standard map, import manager crashes.
    I am using MDM Version 5.5 SP2(5.5.24.04).
    Thanks
    Subbu

    Hi Subbu,
    I encountered this issue around inability around unique values for cloned fields too, although in custom maps, not standard ones.
    1.  When reported, this was fixed in 5.5.24.05.  So, try usin 5.5.24.06 and see if you still face it.
    2. The other option or workaround to be precise is to uncheck the Read-only box in bottom left hand corner of the second screen.  This should work too.
    As a last note, even in 5.5.24.06, I still encounter this issue when importing into nested look up tables. This is up for future fixes.
    I use the uncheck read-only as work around for now. 
    Good luck!
    Savi

  • Period 000 failing data load when using formula FISCPER_CALMONTH

    Hello all,
    I am having issue with my data loads from yesterday, I am using this formula to get calendar month FISCPER_CALMONTH( FISCPER, FISCVAR, FISCYEAR, 0 ).
    But my data loads fail when the FISCPER is 2008000 at this formula with error message
    "An error occured in a function of the formula
    Message no. RS_EXCEPTION000"
    We are using the fiscal year variant N6, is there any other setting that we need to do on BW side.
    Thanks in advance

    Hello Manfred,
    This is what my table T009B looks like for N6 variant, so how do I modify this ?
    Fi.Year Variant Year Calendar month Calendar day Posting period Year shift
    N6              0000 01             31           007            0
    N6              0000 02             29           008            0
    N6              0000 03             31           009            0
    N6              0000 04             30           010            0
    N6              0000 05             31           011            0
    N6              0000 06             30           012            0
    N6              0000 07             31           001            +1
    N6              0000 08             31           002            +1
    N6              0000 09             30           003            +1
    N6              0000 10             31           004            +1
    N6              0000 11             30           005            +1
    N6              0000 12             31           006            +1

  • New to 16x9 format, how get best quality when using standard dv footage?

    If I am capturing standard NTSC dv footage, and adding standard dimension digital photos, what capture and sequence settings should I use to get best looking 16x9 output? I know I can export as 16x9 and burn a 16x9 DVD in DVDSP, but I was thinking I should capture and edit that way as well to get best quality.
    Thus far, I've been editing everything as 4x3 and assuming the tv's these will be shown on will compensate, which is generally true. I would like, however, to give my clients the option of which output option is best for them.

    So, a client would have to give me 16x9 raw footage for me to produce a true 16x9 DVD?
    Yes.
    I know I can't produce HD DVDs, at least not cost effectively, and most people don't have players anyway.
    Right. None of us can. The movies from the store or Netflix aren't HD. HD has no current relevance in DVD production (other than as acquisition formats).
    I do want their footage to look as good as
    possible on those large screen tvs.
    If you produce a good DVD it will look good. All the other DVDs that are 4:3 are just that - 4:3. Same with 4:3 television. If they were produced well they should look great on any screen.
    1. I'm starting with DV NTSC raw footage, a low-res
    codec.
    OK.
    2. I'm compressing to MPEG-2 to be playable on an
    SD-DVD player, a further low res codec.
    OK. But you really mean "to be playable on a DVD player".
    3. Regardless of what I do, it's going to be
    low-res.
    Regardless of what you do, the resolution is limited by current DVD technology. That is, in the NTSC world, 720x480 whether it's 4:3 or 16:9.
    Does MPEG-2 always look crappy on an HDTV? On a 72dpi SDTV, it looks acceptable. Is there a workaround for HDTV?
    Whether or not it looks crappy is subjective. If Hollywood-produced DVDs and SD television look great on it, then it's possible to make it look great.
    Your real limitations - the ones you have control over, are:
    - quality of camera, glass, and related equipment
    - quality of lighting, audio, camerawork, production in general
    - recording format (DV ain't the greatest).
    - editing format (hint: you don't have to edit in DV)
    - quality of editing / editor
    - quality of MPEG2 encoding
    In your case I think the last one is the most relevant. If you aren't getting acceptable results you may need to learn more about MPEG2 and Compressor.
    BTW 72dpi is a print term, it has absolutely no meaning in video.
    Further question, if I'm doing a photo slideshow, not DV footage, can I leave it uncompressed or will it convert to MPEG-2 and stink regardless?
    To make a DVD movie it needs to be MPEG-2. That's the technology we have. But it doesn't have to stink. The MPEG-2 you use is the same MPEG2 the studios use with movie releases. The technology is the same, the difference is that they have people who really really know how to use it well.
    There is a way to make actual slideshows from JPEGs which play from a DVD or CD. I know little about this, but I suspect that the resolution is still limited to 720x480. Someone will correct me if that's wrong. But you don't have to put them through MPEG2 compression.
    You may benefit from finding out what 16:9 really means. All it means is that the display is wider. That's all. There is no implication of a quality increase, in fact from DVD playback the 16:9 picture will always appear a little softer than SD if viewed on a widescreen device. That's just the way it is.

  • Design fails co-sim when using DATAFLOW directive

    hi, there's a function in my design that i want to turn on the DATAFLOW directive,
    but whenever i do so the co-simulation fails,
    and HLS warns that the RTL produces 'X' values.
    the function looks like this:
    void appKernel(const uint32_t in_buf[ROWS][COLS],
    const uint32_t in2_buf[ROWS][COLS], uint32_t out_buf[ROWS][COLS]) {
    #pragma HLS ARRAY_RESHAPE variable=out_buf complete dim=2
    #pragma HLS ARRAY_RESHAPE variable=in2_buf complete dim=2
    #pragma HLS ARRAY_RESHAPE variable=in_buf complete dim=2
    #pragma HLS DATAFLOW
    #pragma HLS INLINE off
    uint32_t aryA_size;
    uint32_t aryB_size;
    uint32_t aryC_size;
    double aryA[ARY_ROWS][ARY_COLS];
    #pragma HLS ARRAY_RESHAPE variable=aryA complete dim=2
    double aryB[ARY_ROWS][ARY_COLS];
    #pragma HLS ARRAY_RESHAPE variable=aryB complete dim=2
    double aryC[ARY_ROWS][ARY_COLS];
    #pragma HLS ARRAY_RESHAPE variable=aryC complete dim=2
    pre_process(in_buf, aryA_size, aryA);
    pre_process(in2_buf, aryB_size, aryB);
    linearR(aryA_size, aryA, aryB_size, aryB, aryC_size, aryC);
    post_process(aryC_size, aryC, out_buf);
    After looking into the trace waveform i found this:
    You can see that the "aryC" ping-pong buffer was written into it 'X' values at the addr 22.
    However at the upper part of waveform, the ap_start, ap_continue, ap_done handshakes for "linearR" looks fine.
    Also, the design works correctly when DATAFLOW was not used.
    The "linearR" function at its end writes to "aryC" in a for loop that looks like this:
    loop_ary_rows: for (int i = 0; i < num_beat; i++) {
    #pragma HLS PIPELINE II=1
    #pragma HLS LOOP_TRIPCOUNT min=1 max=32
    loop_ary_cols: for (int j = 0; j < ARY_COLS; j++) {
    a[j + 3] = aryA[i + 1][j];
    b[j] = aryB[i][j];
    if (a[j] == b[j])
    aryC[i][j] = 5.0;
    else
    aryC[i][j] = 7.0;
    a[0] = a[4];
    a[1] = a[5];
    a[2] = a[6];
    So, what is wrong and how do i go about debugging it ?

    Hi ,
    2014.4 is not the latest one. We have released 2015.1 & now the latest one is 2015.2.
    Yes, 2015.2 is much stable compared to 2014.4. Please check in 2015.2. I can check for you in 2015.2. Please attach the archived project here.

  • Reports6i reports fail to run when used with parameters

    Hi there,
    I have successfully got reports 6i integrated with Portal. I can expose a report into a content area and run it as type HTMLCSS etc.
    However, when I change the report component to use the parameters it all goes wrong. I have added the user parameters in my report in the portal report definition 'edit' settings and made them visible via the customize option. I have then edited the properties for the item in the content area and turned on the parameter form.
    When I click on the item to run the report the parameter screen is displayed (with unfriendly P_PARAM_1 style titles which I would also like to change) and I enter the values and run the report. It bombs out with:
    Oracle Reports Server CGI - Report Job has terminated with error.
    Reports Server Replies:
    REP-0248: Security check failed
    Error sequence number is: 17
    Error code30005 - Cannot access the output format:HTML
    In package:wwv_rw_usr function:security_check
    Command line is: server=Rep60_quay-street15 report=glf001aaaaa.rep destype=Cache desformat=HTML rundate="15-FEB-02 02:02:22" P_ACC_FROM="04202" P_ACC_TO="04202" P_COMPANY="Total" P_COST_CENTR="Total" P_EMPLOYEE="Total" P_END_ATTR_VAL="ZZ" P_PERIOD="DEC-01" P_PROGRAM="Total" P_REPORT_TYPE="Account Owner" P_SPARE="Total" P_START_ATTR_VAL="0" WEBDBVERSION="3" WWVRW_LOG_ID_="1" WWVRW_STIME_="-1701052885" SESSION_ID="993046001106" USERID="crystal@offm11"
    Executed on:02/15/02 02:02:22
    The parameter form in Reports works fine. Do I need to change anything for web based parameter forms?
    Any ideas?
    John

    Ok, got it working by ensuring that I have displayed the DESFORMAT to the parameter screen. Weird! Must you always display System Parameters?
    I would still like to change the parameter titles on the parameter screen. Can this be done?

  • "Filter failed" in CUPS when using IPP (HP LaserJet 500 color M551)

    I have two ArchLinux machines, one with HP LaserJet 500 color M551 connected over USB and another one on the same network. Printing over network (ipp) doesn't work: CUPS on the client says "Filter failed", so the job doesn't even reach the server. Printing directly from the server works perfectly fine, there's no "Filter failed" message and it just prints.
    Both machines have the same ArchLinux installation, they are both x86_64, they have hpijs installed and the same PPD selected. This WiKi entry didn't help and the printer differs from the one discussed here, so it doesn't seem to be a well-known issue. :-(
    I tried to reinstall the printer on the client many times, using both DNSSD and direct URI input. All this seems to work fine. The filter that fails is probably /usr/lib/cups/filter/hpps, but I have no idea how to get debugging info from it, i.e., why it fails etc. The same filter works just fine on the server.
    I thought this might have something to do with the distinction between PostScript and the HP PCL variants. Enabling Adobe TBCP should fix this by adding the appropriate binary metadata and escaping things as needed... However, switching TBCP on in the CUPS printer settings stopped the printer from working. The printer appeared to be OK and responsive, but simply didn't print anything. Disabling TBCP fixed this on the server, but the client shows the "Filter failed" message, no matter what's happening on the server.

    I have similar problems with network printing (from various 32-bit and 64-bit Arch systems) producing 'Filter failed' messages, while directly printing from the CUPS server - with USB connection to the device - works as expected. My all-in-one device is an HP Photosmart C4480 and everything worked fine a few weeks ago. (Ironically, I can get network scanning using Xsane!) I've tried reinstalling, and various drivers to no avail.
    It's very frustrating, and I think I've tried everything suggested in the Wiki.
    Added later, after setting 'LogLevel debug' in cupsd.conf:
    D [21/Aug/2013:22:19:57 +0100] [Job 18] Adding start banner page "none".
    D [21/Aug/2013:22:19:57 +0100] [Job 18] Queued on "hpc4480" by "anonymous".
    D [21/Aug/2013:22:19:57 +0100] [Job 18] File of type application/vnd.cups-raster queued by "anonymous".
    D [21/Aug/2013:22:19:57 +0100] [Job 18] Adding end banner page "none".
    D [21/Aug/2013:22:19:57 +0100] [Job 18] time-at-processing=1377119997
    D [21/Aug/2013:22:19:57 +0100] [Job 18] 1 filters for job:
    D [21/Aug/2013:22:19:57 +0100] [Job 18] hpcups (application/vnd.cups-raster to printer/hpc4480, cost 0)
    D [21/Aug/2013:22:19:57 +0100] [Job 18] job-sheets=none,none
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[0]="hpc4480"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[1]="18"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[2]="anonymous"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[3]="Test Page"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[4]="1"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[5]="job-uuid=urn:uuid:febcff1d-2cc5-3058-4c2f-c420e625e3ec job-originating-host-name=192.168.1.11 time-at-creation=1377119989 time-at-processing=1377119997"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] argv[6]="/var/spool/cups/d00018-001"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[7]="CUPS_STATEDIR=/run/cups"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[8]="HOME=/var/spool/cups/tmp"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[10]="[email protected]"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[11]="SOFTWARE=CUPS/1.6.3"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[13]="USER=root"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[14]="CUPS_MAX_MESSAGE=2047"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[17]="IPP_PORT=631"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[18]="CHARSET=utf-8"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[19]="LANG=en_GB.UTF-8"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[20]="PPD=/etc/cups/ppd/hpc4480.ppd"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[21]="RIP_MAX_CACHE=128m"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[22]="CONTENT_TYPE=application/vnd.cups-raster"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[23]="DEVICE_URI=hp:/usb/Photosmart_C4400_series?serial=MY842FM2150557"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[24]="PRINTER_INFO=HP Photosmart C4480"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[25]="PRINTER_LOCATION=ninian"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[26]="PRINTER=hpc4480"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[27]="PRINTER_STATE_REASONS=none"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[28]="CUPS_FILETYPE=document"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] envp[29]="AUTH_I****"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] Started filter /usr/lib/cups/filter/hpcups (PID 8978)
    D [21/Aug/2013:22:19:57 +0100] [Job 18] Started backend /usr/lib/cups/backend/hp (PID 8979)
    D [21/Aug/2013:22:19:57 +0100] [Job 18] prnt/hpcups/HPCupsFilter.cpp 548: cupsRasterOpen failed, fd = 5
    D [21/Aug/2013:22:19:57 +0100] [Job 18] PID 8978 (/usr/lib/cups/filter/hpcups) stopped with status 1.
    D [21/Aug/2013:22:19:57 +0100] [Job 18] Hint: Try setting the LogLevel to "debug" to find out more.
    D [21/Aug/2013:22:19:57 +0100] [Job 18] prnt/backend/hp.c 839: ERROR: null print job total=0
    D [21/Aug/2013:22:19:57 +0100] [Job 18] PID 8979 (/usr/lib/cups/backend/hp) exited with no errors.
    D [21/Aug/2013:22:19:57 +0100] [Job 18] End of messages
    D [21/Aug/2013:22:19:57 +0100] [Job 18] printer-state=3(idle)
    D [21/Aug/2013:22:19:57 +0100] [Job 18] printer-state-message="Filter failed"
    D [21/Aug/2013:22:19:57 +0100] [Job 18] printer-state-reasons=none
    Crucial error seems to be: prnt/hpcups/HPCupsFilter.cpp 548: cupsRasterOpen failed, fd = 5
    Last edited by ninian (2013-08-21 21:28:58)

  • How to set the margin of a jtextfield when using standard lineborder

    Hi,
    I want to give my jtextfield a custom inset. The problem is that I also use a lineborder which controls the inset, thus when I try to the setMargin method, it doesn't work.
    Can anyone tell me how to do this?
    Much thanks
    Hugo Hendriks

    hello,
    try to use a compoundborder and add the lineborder and an emptyborder to it. by setting the emptyborders insets you can control the jtextpanes insets.
    i hope that one works =)
    bye

  • W2k3 Auth failed with KRB5KDC_ERR_ETYPE_NOSUPP when using DES

    We are authenticating users on AD server 2k3, and the users are setup in AD to use DES (checked "Use DES encryption types for this account" in user properties).
    It failed somehow with ETYPE_NOSUPP. From the packet capture, I can find KRB5 AS-REQ contains des-cbc-crc/des-cbc-md5/des-cbc-md4 as encryption types.
    This is the request:
    ++++++++++ REQUEST ++++++++++++++++
    Kerberos AS-REQ
    Pvno: 5
    MSG Type: AS-REQ (10)
    padata: PA-ENC-TIMESTAMP
    Type: PA-ENC-TIMESTAMP (2)
    Value: 303ba003020117a2340432482d36ca7556ebf719421fc8b4... rc4-hmac
    Encryption type: rc4-hmac (23)
    enc PA_ENC_TIMESTAMP: 482d36ca7556ebf719421fc8b4530cfea187d35318fd63bd...
    KDC_REQ_BODY
    Padding: 0
    KDCOptions: 00000010 (Renewable OK)
    .0.. .... .... .... .... .... .... .... = Forwardable: Do NOT use forwardable tickets
    ..0. .... .... .... .... .... .... .... = Forwarded: This is NOT a forwarded ticket
    ...0 .... .... .... .... .... .... .... = Proxiable: Do NOT use proxiable tickets
    .... 0... .... .... .... .... .... .... = Proxy: This ticket has NOT been proxied
    .... .0.. .... .... .... .... .... .... = Allow Postdate: We do NOT allow the ticket to be postdated
    .... ..0. .... .... .... .... .... .... = Postdated: This ticket is NOT postdated
    .... .... 0... .... .... .... .... .... = Renewable: This ticket is NOT renewable
    .... .... ...0 .... .... .... .... .... = Opt HW Auth: False
    .... .... .... ..0. .... .... .... .... = Constrained Delegation: This is a normal request (no constrained delegation)
    .... .... .... ...0 .... .... .... .... = Canonicalize: This is NOT a canonicalized ticket request
    .... .... .... .... .... .... ..0. .... = Disable Transited Check: Transited checking is NOT disabled
    .... .... .... .... .... .... ...1 .... = Renewable OK: We accept RENEWED tickets
    .... .... .... .... .... .... .... 0... = Enc-Tkt-in-Skey: Do NOT encrypt the tkt inside the skey
    .... .... .... .... .... .... .... ..0. = Renew: This is NOT a request to renew a ticket
    .... .... .... .... .... .... .... ...0 = Validate: This is NOT a request to validate a postdated ticket
    Client Name (Principal): test
    Name-type: Principal (1)
    Name: test
    Realm: SRV.MYTESTSERVER.LOC
    Server Name (Unknown): krbtgt/SRV.MYTESTSERVER.LOC
    Name-type: Unknown (0)
    Name: krbtgt
    Name: FP.DEREKTESTING.COM
    from: 2011-04-07 08:10:06 (UTC)
    till: 2011-04-08 08:10:06 (UTC)
    Nonce: 1302163806
    Encryption Types: aes256-cts-hmac-sha1-96 aes128-cts-hmac-sha1-96 des3-cbc-sha1 rc4-hmac des-cbc-crc des-cbc-md5 des-cbc-md4
    Encryption type: aes256-cts-hmac-sha1-96 (18)
    Encryption type: aes128-cts-hmac-sha1-96 (17)
    Encryption type: des3-cbc-sha1 (16)
    Encryption type: rc4-hmac (23)
    Encryption type: des-cbc-crc (1)
    Encryption type: des-cbc-md5 (3)
    Encryption type: des-cbc-md4 (2)
    ++++++++++ REQUEST ++++++++++++++++
    And this is the response:
    ++++++++++ RESPONSE ++++++++++++++++
    Kerberos KRB-ERROR
    Pvno: 5
    MSG Type: KRB-ERROR (30)
    stime: 2011-04-07 08:10:06 (UTC)
    susec: 247525
    error_code: KRB5KDC_ERR_ETYPE_NOSUPP (14)
    Realm: SRV.MYTESTSERVER.LOC
    Server Name (Unknown): krbtgt/SRV.MYTESTSERVER.LOC
    Name-type: Unknown (0)
    Name: krbtgt
    Name: SRV.MYTESTSERVER.LOC
    e-data
    padata: PA-ENCTYPE-INFO
    Type: PA-ENCTYPE-INFO (11)
    Value: 30443020a003020103a119041746502e444552454b544553... des-cbc-md5 des-cbc-crc
    Encryption type: des-cbc-md5 (3)
    Salt: 46502e444552454b54455354494e472e434f4d6a69616e
    Encryption type: des-cbc-crc (1)
    Salt: 46502e444552454b54455354494e472e434f4d6a69616e
    ++++++++++ RESPONSE ++++++++++++++++
    What could have possibly gone wrong? I also tried to reset the passwords of administrator and the user and restart the kdc services. It didn't help.
    Thanks.

    I am not sure, the exact behaviour must be specified somewhere, but I was not able to find any precise documentation on the topic. It may be, that the DC preferes AES if allowed by the client and it may colide with the setting on the user account.
    Anyway, why do you use the checkbox at all? If you wanted to enforce DES, you could have enabled the "System Cryptography: Use FIPS compliant algorithms for encryption, hashing and siging" policy which would switch the whole environment to DES or AES automatically.
    The user account setting is meant to only those accounts that are used by non-windows services IMHO.
    ondrej.

  • Tabindex fails to work when using any adobe component!

    Hello,
    Does anyone know why the tabIndex does not work as soon as
    you drag a adobe component to
    the stage. (Like a buton, combobox, checkbox ..)
    For example if you have to input text fields, you can you the
    tab key to switch from the first textfield
    to the next. But it does not work anymoer when you use a
    component like a comobox, or button
    Regards,

    Hi -  Is dns lookup set to all clients in Server.app DNS ?
    To set logging for dns:
    #look for the block below and change info to debug
    #Ctrl x then Y then <ret>
    #Stop and Start DNS in server.app or $ sudo serveradmin stop dns / $ sudo serveradmin start dns
    #log is /Library/Logs/named.log and is available in Console.app
    $ sudo nano /etc/named.conf
    logging {
              channel "_default_log" {
                        file "/Library/Logs/named.log";
                        severity info;
                        print-time yes;
              category "default" {
                        "_default_log";
    Good luck!

Maybe you are looking for