PreparedStatement with 56cols in batch giving ArrayIndexOutOfBoundException

Hello All,
PreparedStatement trying to do bath update/inserts in table with 56 columns is giving ArrayIndexOutOfBoundException sporadically with 11.2.0.3 driver. Is it related to Bug 6396242,which was supposed fix in 11.1.0.7.0?
Here is the stackTrace:
EXCEPTION ENCOUNTERED:
java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 4
at oracle.jdbc.driver.VarnumBinder.big5pow(OraclePreparedStatement.java:15348)
at oracle.jdbc.driver.VarnumBinder.constructPow52(OraclePreparedStatement.java:15420)
at oracle.jdbc.driver.VarnumBinder.dtoa(OraclePreparedStatement.java:15884)
at oracle.jdbc.driver.DoubleBinder.bind(OraclePreparedStatement.java:17239)
at oracle.jdbc.driver.OraclePreparedStatement.setupBindBuffers(OraclePreparedStatement.java:3137)
at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:2355)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3579)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3665)

Welcome to the forum!
>
PreparedStatement trying to do bath update/inserts in table with 56 columns is giving ArrayIndexOutOfBoundException sporadically with 11.2.0.3 driver. Is it related to Bug 6396242,which was supposed fix in 11.1.0.7.0?
>
How would anyone know? You haven't posted the 4 digit Oracle version, the JDK version, the platform or any code for anyone to look at.
Post the code and other information people need to try to help you.

Similar Messages

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

Preparedstatement with multiple parameters on joined tables w/ (AND,OR)??

Ihave a Query that reads a list of materials (1 to many) and a string of delimited numbers. I am currently going through a couple of loops to build my Query string. For example:
WHERE (materials.material = '?' OR materials.material = '?' )........ AND (materials.ONE = '?' "; OR materials.ONE = '?' "; )........
It also involves reading data from two tables: See Query String below:
Query = "Select transactions.control,transactions.date_sent, transactions.date_received, transactions.sender,transactions.recipient,materials.control,materials.material,materials.R,materials.ONE,materials.parent_item,materials.sub_ctrl,materials.quanity FROM transactions LEFT JOIN materials ON transactions.control = materials.control WHERE (LOOP) materials.material = '?' AND (LOOP)materials.ONE = '?' ";
Is it possible to use a preparedstatement with parameters when the number of parameters is unknown until the user selects them?

Is it possible to use a preparedstatement withparameters when the number of parameters is unknown
until the user selects them?
masuda1967 is being too Japanese. The answer to your
question is "No".Actually, I would take masuda-san's suggestion--sort of.
You can do the incremental query construction he suggested, but with prepared statements. Something like this. (Note: Probably doesn't match your code exactly, but you should get the idea.)StringBuffer query = new StringBuffer("select ... whatever ...");
for (int ix = 0; ix < numParams; ix++) {
    if (x > 0) {
        query.append(", ")
    query.append(" ? ");
ps = con.prepareStatement(query.toString());
for (int ix = 0; ix < numParams; ix++) {
    set the param
} You won't get the performance benefit that can come from using PreparedStatement, but you still avoid the headache of escaping strings, formatting dates, etc.
ジ

Sales order nuber with ref to batch

Friends,
Could you please explain how we can search a sales order number with reference to batch number?
I mean, I know batch number and want to know sales order number.
Thanks

Hi,
You can get through 'MB5C'.
mb56 also give useful information.
Regards

How can I add donate page with different levels of giving such as $250, $150, $50, Other

How can I add donate page with different levels of giving such as $250, $150, $50, Other. I am using Foxy Cart…is this possible?

From Muse end , you can add texts as donation value with paypal button which would take the users to paypal site for payment, with Foxy Cart you can try the suggestion mentioned here :
https://forum.foxycart.com/discussion/4417/donation-page-radio-button/p1
Thanks,
Sanjit

PreparedStatement with a mssqlserver4v65 DataSource

We have been trying to boost our performance by using PreparedStatement
with the WLS MSSQL Driver, but gained none. Are any of you out there
using PreparedStatements with that driver and noticing performance
improvement?
On a related note, what could we possibly do so wrong with that driver
that would annihilate the performance boost we should have gained? If we
switch to another driver with the exact same code, we see that we gain a
noticable performance gain thanks to the use of PreparedStatements.
Any idea?
Thanks,
Christophe

Thanks for your active feedback, Slava. Joe explained everything in
another email in this thread.
And Joe, since you seem to read every post, a BIG THANKS to you too!
Christophe
Slava Imeshev wrote:
Christophe,
First, you have to close result set explicitly.
Second, you say you don't see performance gain.
What did you use to compare performance of prepared
statement?
Regards,
Slava Imeshev
"Christophe Warland" <christophe.warland_REM@OVE_s1.com> wrote in message
news:3C60270F.4060900@OVE_s1.com...
We are using WLS 6.1 SP1.
Our code is actually part of a huge piece of our architecture, so I can
not easily give something to you that would compile on your machine. But
it would look like the following excerpt. 'runTest' acquires a
connection from a JNDI DataSource, creates a PreparedStatement and then
loops on 'testItSingle'.
public long runTest() throws Exception {
long start = System.currentTimeMillis();
// acquire connection from JNDI datasource
// (not shown here)
Connection con = getConnection();
String sql = getSql();
PreparedStatement st = con.prepareStatement(sql);
for (int i = 0; i < TEST_LEN; ++i) {
testItSingle(i, st);
close(st);
close(con);
long end = System.currentTimeMillis();
return end - start;
protected void testItSingle(int i, PreparedStatement st)
throws Exception {
String[] elem = DATA;
String p1 = elem[0]; // acct id
String p3 = elem[1]; // prod code
st.setString(1, p1);
st.setLong(2, ISOCode);
st.setString(3, p3);
ResultSet rs = st.executeQuery();
protected String getSql() {
return "SELECT A.versionStamp AS aLockValue, B.versionStamp AS
bLockValue, A.VFMAcctKy, A.SECEntityKy, A.VFMProductKy, A.acctID,
A.ISOCurrencyCdKy, A.isSrcXferEnabled, A.isDestXferEnabled,
A.maxXferAmt, A.minXferAmt, A.maxPmtAmt, A.minPmtAmt, A.versionStamp,
ledgerBal, ledgerBalDttm, availBal, availBalDttm, overdraftBal,
overdraftBalDttm, ytdInt, ytdIntDttm, lstYrInt, lstYrIntDttm, sumField1,
sumField2, sumField3, sumField4, sumField5, sumField6, sumField7,
sumField8, sumField9, sumField10, sumField11, sumField12, sumField13,
sumField14, sumField15, sumField16, sumField17, sumField18, sumField19,
sumField20 , E.VFMProdSubTypeKy, null VFMCustomerKy FROM VFMAcct A,
VBMDepositAcct B, VFMProduct E WHERE A.VFMAcctKy = B.VFMAcctKy AND
E.VFMProductKy = A.VFMProductKy AND A.acctID = ? AND A.ISOCurrencyCdKy =
? AND E.productCode = ? ORDER BY E.VFMProdSubTypeKy";
We also try to close statement and result set inside 'testItSingle' but
it didn't imporve anything. The preparedstament was actually reopened
silently and running just fine.
Thanks for your help,
Christophe
Slava Imeshev wrote:
Christophe,
Which version of weblogic and service pack do you use?
Could you show us your questionable code?

Exclude line items with has no batch when we create a delivery

Hi All,
How can i Exclude line items with has no batch(Batch determination not found)when we create a delivery from sales order. Is there any user exit to prevent line items with has no batch number. I appreciate your help.
thanks,
Nara.

Hi
Can you try by putting some custom code in the include MV50AFZZ/mv50afz1/mv50afz2/mv50afz3/mv50afzk/mv50afzl. These are all exit.
Thanks
Chinmoy
Message was edited by: Chinmoy Ghosh

Putaway and picking in ERP-WM with SU and batches with mixed stock

Hello all,
I configured a WM warehouse with SU management, and batch management. We have bulk storage for example of 20 pallets. each pallet may have its own SU and batch numbers. As a result we may have in the bulk storage 20 SUs with 20 different batches.
I have 2 problems:
1. in Putaway strategy B (Bulk) - although the storage type is configured to allow mixed storage - automatically the system chooses the next empty bin. How can I force the system to add to existing stock instead?
2. in Outbound Delivery (when the batch number is not entered in the delivery), when I create the TO (through LT03), the system proposes a FIFO batch number (again, we are talking about Bulk storage). How do I tell the system not to determine the batch number - but instead take it from the chosen SU on confirmation?
Thanks,
Isaac

Hi,
1. in Putaway strategy B (Bulk) - although the storage type is configured to allow mixed storage - automatically the system chooses the next empty bin. How can I force the system to add to existing stock instead?
In Bulk system would only one SU type perBin. If the next SU is of diferent SU type then it would propose the next Bin.
2. in Outbound Delivery (when the batch number is not entered in the delivery), when I create the TO (through LT03), the system proposes a FIFO batch number (again, we are talking about Bulk storage). How do I tell the system not to determine the batch number - but instead take it from the chosen SU on confirmation?
In this case you do not setup batch determination at delivery or WM level.
Since this is Bulk, system will allow for SU number to be entered during picking.
However the Batch number population in TO upon SU selection is doubtful.
Hope this helps.

HT201077 In the days of Mobile me I was able to share my photos with people by simply giving them a link to my online photos. With Photostream this appears to be impossible? Is this so?

In the days of Mobile me I was able to share my photos with people by simply giving them a link to my online photos. With Photostream this appears to be impossible? Is this so?

No that's not possible with iCloud, however there are ways of sharing photos, but first could you confirm your OS, iCloud doesn't work with OS X 10.4

PreparedStatement with BatchUpdate..

Hi to all,
Can anybody provide me as how to proceed for Batch updation with PreparedStatements.
Thanks in advance.
khiz_eng

Hi Shreel,
Many thanx for kind response and solution...
Thanx.
khiz_eng

Issue with SAP MII Batch RDS

Hi
We are deploying the SAP MII Batch manufacturing Rapid deployment solution.After deploying the package and setting up all the config guide, we have following concerns.
1. The orders are coming in operator dashboard but can not see work instructions (PI sheets contents).
2. Also , in the confirmation screen , can't pull the orders.It is always coming 0 even the records are there.
3. The data which is supplied with package is in German format. Is this OK or have data in English as well.
4. Have deployed the package on oracle database so have issue converting some of the SQL server data into oracle.Means we have to convert script into Oracle scripts and hence some statements through errors and all the master data in the table is not updated.
5. We are using plant name as PL99 instead of 1000 , will this have any issue.
Any kind of help is appreciated.
Thanks & Regards
Vinod

Instead of directly submiting these jobs.
in the Job definition screen if you right click on job definition
you will get a option new job definition it will give several option
use the one you require and go next next this inturn submits the jobs you mentioned.

Issue with Adobe Bridge batch rename crashing

Hi, I have been trying to rename photo files in Adobe Bridge CC using the batch rename tool. I have just started using CC apps. All the updates are done. It crashes after doing just a few files. Started with 40 files at a time, crashed. Empty folder cache. Tried with 20 files, worked for a few times then crashed again. Tried 10 files and it crashed immediately. I found directions online (unfortunately it was for CS5, but I assume it's similar to CC). Any ideas on what to do differently? I really need to get these photos renamed and to a client tomorrow. Thanks in advance for any help.
Cheryl

Video card is updated, though I've been getting an error message on it.
I'm not sure what this should have to do with your batch rename problem. Your specs seem more then sufficient and batch renaming does only save the files you already have cached.
First check if you have enough free space left on your disk (at least 10 - 15 % free space is needed for good operation of your system and apps) and also try to reset preferences for Bridge by holding down contrl key while restarting Bridge. Check reset preferences from the pop up window and try again.

Internal bank info associated with R12 payment batch (PPR)

All,
I am working on the R12 report for AP Checks and have a question regarding the same. The eTrm for 12.1.1 says ((http://etrm.oracle.com/pls/etrm/etrm_pnav.show_object?c_name=AP_INV_SELECTION_CRITERIA_ALL&c_owner=AP&c_type=TABLE) that the bank_account_id is no longer used in ap_inv_selection_criteria_all table.
Now, inorder to get the (internal) bank account information for which the PPR (payment batch/payment process request) is created, I was planning to use the ce_bank_acct_use_id in ap_inv_selection_criteria_all table as bank_account_id is no longer used but when I created a couple of PPRs, I found that the bank_account_id is ALWAYS populated and the ce_bank_acct_use_id is NEVER populated. Has anyone faced this problem before? Please let me know what is the right thing to do to get the internal bank account info associated with the PPR.
Thanks.

Hi Ash,
I'm not aware of an open interface for Oracle "payment batches", so what you could do is:
1. Load the details as AP Invoices via the Payables Open Interface tables, with check number, check date, payment status as DFF fields, and using a specific pay group.
2. Import the invoices using open interface import (you specify a payables batch name here)
3. Pay the invoices in Oracle using a dummy payment batch that does nowhere.
4. Modify the standard reports so that the check number / date is picked up off the invoice DFF.
Note that this method assumes you already have the Vendor and Bank Account created in Oracle. There is an open interface for suppliers, but not bank accounts.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com

Help with writing a batch file

Hi :
does anyone know anyplace online that I can get help in writing batch files?? I have never worked much with batch files before....
any help is greatly appreciated
thnx

I suppose, since you're in a Java forum, you need batch files to load java applications.
If you use windows :
go to ms console (start/run/"cmd")
type edit mybatch.bat
write your command to load a java application, something like
java myclass.class
save and exit.
Be sure the bat file and the class are in the same folder.
And make certain you've set the classpath, and path variables correctly.
If this was what you needed and you need more help just ask.
(In this case it could be better to make executable jars)
If you wanted to know about linux batches, it works pretty the same way.

Help with calling a batch file from projector

Hi all. I have been asking a fair number of questions here recently and have been very pleased with the responses, so here is one more for you. Hopefully I can get another solution. :]
I have a flash project acting like a menu and being published as an .exe (projector). In this file, I have a button with the following code:
button1.onRelease=function(){
fscommand("exec", "openfiles.bat");
I have an fscommand folder (in the same directory as my flash file) which contains the openfiles.bat, with one line:
start myfile.txt
myfile.txt is also located in the fscommand folder. When I simply click on this batch file and run it, the text file opens as it should. However, when I click the button in my flash file, a command prompt window flashes too quickly to see with some sort of error message. It says something about not finding a certain directory and defaulting to the windows directory. I'm assuming it cannot find either my batch file or my text file. I am under the impression that as long as everything is in the fscommand folder it should work properly. Can anyone offer me advice? Thanks!

http://www.northcode.com/blog.php/2007/08/14/FSCommand-EXEC-is-Broken-in-Flash-CS3

PreparedStatement with 56cols in batch giving ArrayIndexOutOfBoundException

Similar Messages

Maybe you are looking for