PrepareRedirect and external URL

Hi
I've created a custom service that I would like to redirect to an external url outside UCM but once a user has been authenticated in UCM. Is it possible? It seems that in the prepareRedirect subservice only idcServices are accepted. Does anyone know how to achieve this?
My service is something like this:
<td>MY_SERVICE</td>
<td>Service
0
null
null
null<br>
null</td>
<td>3:checkForceLogin::0:null
3:prepareRedirect:www.oracle.com:0:null</td>
If the URL contains ":" then I'm getting an Idocscript syntax error.
Thanks & regards.

I'm wondering what your use case is
- you can use other means to redirect to an external URL (check e.g. this: http://en.wikipedia.org/wiki/URL_redirection)
- prepareRedirect is used to redirect to a page once a UCM task (like CheckIn or Update) finishes; often it redirects to HomePage or "DoAnother" page template, plus it holds user's login
To be honest, I don't get why anyone would need to create a service (called in unmanned mode?) that would require UCM login and then immediately redirect to an external URL (shown to the user?). It sounds to me more like a SSO (single sign-on) scenario, where UCM is used solely as a pool of user identities. In fact, in 11g it makes even less sense, because identities are stored in a LDAP. Nevertheless, it sounds like a way to sort out your problem: if not done yet, suggest to store identities in LDAP and authenticate against it when login to the external URL. If you need it as a service, check for Oracle Service Bus or similar middleware technologies.

Similar Messages

Unable to activate internal and external urls at the same time

Hi,
We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
For both external and internal services are UP.opmn status is live no error.
Using Apache as reverse proxy.
EXTERNAL Reverse proxy settings:
s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
INTERNAL Middle Tier settings:
s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
Are we missing anything....
Thanks & Regards

Hi,
Finally it's resolved...Following is the solution thought to share in the forum:
The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
to SERVRESP.
To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
shown below:
sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
It's resolved after doing this..

Exchange 2010 and 2013 coexistence Internal and external URL

Hi all,
been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
Still i dont get any smarter.
Here is scenario:
Exchange 2010
Cas1
Cas2
Mailbox1
Mailbox2
Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
Exchange 2013
CAS+Mailbox
Cas+Mailbox
DNS
mail.exchange.com pointing to VIP (kemp loadbalancer)
Autodiscover ( pointed to same vip ,kemp load balancer)
Outlook anywhere on all servers (2010 and 2013)
Internal ( pointing to VIP on Kemp)
External ( pointing to external IP,then it passes firewall that again passes to kemp)
Problem we are having is when migrating users from Exchange 2010 - 2013.
Users using Outlook 2010
restart of outlook and mail works fine.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Users using Outlook 2013
Outlook in disconnected status,only fix is to create new profile.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
Where is the config wrong?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi Martina,
did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
Tried repair Outlook profile,no og.Only fix is to setup New account.
Any more tips?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Archive Link and external URL Link

Hi,
we use Archive Link, NO own documents (like CV01N,..). We want to define different document types (oac2) and link them to via url to an external webserver, the user should see the doc in the normal attachment list.
Doc Typ    url
DOC1        http://www.xsfd.wer/show?...
DOC2        http://www.ssdfs.ver/show?
In oac0 (definition content rep) there is an subtyp called "URL", looks like it could be this kind of rep? All solutions and hints I found where based on DMS/KPRO not ArchiveLink. I don't want to use link to external Document via GOS.
Regards,
Christian

Dear all,
no, I found no solution to access automatically! And I was not able to find a definition of the "URL" Repository.
Best regards,
christian

Alternative Access Mappings (AAM) issue accessing from internal and external URL's

Hi,
We have SharePoint 2010 with couple site collections. Our farm has following URLs (AAM):
For internal access:
intranet.company.local - all sites,
mysite.company.local   - my sites.
For external access:
extranet.company.com - all sites,
mysite.company.com   - my sites.
Then we access extranet.company.com using domain credentials on some sites we get authentication request for mysite.company.local. This is because we use some web parts that reference to My Sites.
But why we are asked credentials for mysite.company.local and not for mysite.company.com
if we access extranet.company.com, how this can be changed?
Thanks

Hi jori5,
Please set the intranet.company.com and mysite.company.com for the Default zone, then check results again.
Default Web Application
Default  https://extranet.company.com
Internet http://intranet.company.local
My Site Web Application
Default https://mysite.company.com
Internet http://mysite.company.local
Thanks
Daniel Yang
TechNet Community Support

Single URL for internal and external CRM access when using IFD

Hello,
At one of our client site I have setup IFD on CRM 2011. This IFD is behind TMG. My client is a big corporation therefore all CRM components including CRM, ADFS and SQL are on separate servers.
I have configured IFD using single url https://orgname.contoso.com Their IT staff wants to know why can't they use single URL for internal and external access where internal users are nto prompted for authentication
when logging on to the CRM server. I know you can do URL re-write in ADFS but they want to know the reason "why internal users can't use the same IFD URL and don't get prompted for their credentials". Text below is from their IT staff.

There are several approaches to your question. You need to set up both an internal and an external relying party trust. If you use the external URL, it will always direct you to the signin page, if you use the internal URL, it will resolve you single
sign on.
I've configured IFD for CRM multiple times, and this is how it works. CRM looks at the URL. If you use the external URL (org.domain.com), it will prompt for credentials. So what you are asking for, a single URL that works single sign on internally and prompts
externally really isn't possible.
What I recommend is:
1. make the external URL available internally
2. Configure all outlook clients against the external URL, that way you won't have to reconfigure when someone goes internal to external
3. Have users who are primarily internal use the internal URL for the web client, which will resolve single sign on
4. Have users who are primarily external use the external URL for the web client
For #1, since you only need to enter the credentials when you first configure CRM, it is in all effects single sign on.
One thing I haven't tried that may work is using IIS redirect internally to redirect the external URL to the internal URL. There is also a powershell script in the IFD guide that you can use to make the outlook client switch between the internal and external
URL's, but nothing that will give you a single URL that works as the internal relying party trust when internal and the external relying party trust when you are external.

Calling external URL with POST data

Hi:
In my action bean I have to call and external URL (outside my domain), and along with this URL 'POST' data. I have tried the following code:
try {
FacesContext lclFC = FacesContext.getCurrentInstance().getFacesContext();
lclFC.getExternalContext().getRequestMap().put("x_loc_zip","94804");
lclFC.getExternalContext().redirect("http://www.mysite.com/personals/search/search.html");
} catch (IOException e) {
throw new FacesException(e);
finally {
lclFC.responseComplete();
This works fine in calling the other URL, but no data is sent thru the post protocol. I have no control to the site I am calling....
I have also tried
ExternalContext ectx = FacesContext.getInstance().getFacesContext().getExternalContext();
HttpServletRequest request = (HttpServletRequest) ectx.getRequest();
HttpServletResponse response = (HttpServletResponse) ectx.getResponse();
RequestDispatcher dispatcher = request.getRequestDispatcher("http://www.mysite.com/personals/search/search.html");
dispatcher.forward(request, response);
But this tends to put a "/" at the front of the called URL. Can someone please recoomed the coorect way to call a URL from yr action bean and sending it data thru post protocol. I also wish that this new URL should now be displayed within the browser. This is urgent, yr quick reply is appreciated

Myfaces sandbox form gives the ability to change its action url and port. Look here:
http://myfaces.apache.org/sandbox/form.html

Can't use my custom claims provider when access to my site from external url

Hi,
I just created a clean SP 2013 (15.0.4641.1000) environment and I have a site collection up and running with access from internal url (http://my_server_name/) and external url (http://cloudshare_external_url/).
When I access from internal url (with the local administrator account) I can add users to site groups:
But if I access from external url (with the local administrator account, too) the people picker does not work:
And if I put the email directly, I get the following error: "Sorry, you are not allowed to share this with external users"
What am I doing wrong? Am I missing something?

Hi Sebasl,
Based on your description, my understanding is that the users cannot be resolved when accessing the site using external URL.
I recommend to check the authentication provider for the external zone of the web application to see if the custom claims provider is selected.
Please go to Central Administration > Application Management > Manage web applications > highlight the corresponding web application and then click Authentication Providers in the ribbon > click the external zone.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
hope someone can help!

May have something to do with whether or not the URL can be reached while building your widget. I've got a video on the web. When I enter the URL into the field for the video object and click to another field, the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you.
Is the video accessible from your Mac while you're laying out your widget?
-Mark

External URL Mapping and Full-Text Search Generation

I have a dilemma,
I can map external URL all fine e.g.
<map version="1.0">
<mapID target="Welcome" url="http://docweb.net/help/test.html"/>
</map>
but the html files are not contained in the local directory, and thus the jhindexer is unable to (as far as i know anyway) generate full-text search using the externally linked html files
also from using a decompiler I have found that you can "force" it to generate the help for external urls (as the indexer prefixes all urls with the "file:" protocol, but I can only get this to work under debug mode, else it gives a heapSpace exception, so I wish to avoid having to do anymore unneccesary digging/decompiling.
Also just as a gripe, why is most of the java help source code unavailable, and the Indexer seems to be very inflexible (ontop of not having any documentation)

That's the way it worked in X4 and later versions up but not including RH8. RH8 includes phrase searching in webhelp.
See www.grainge.org for RoboHelp and Authoring tips

Use Same URL for Internal and External Access for CRM 2015 IFD

I have setup a CRM2015 server for IFD access.
ADFS and CRM are on separate servers.
CRM server all roles
ADFS 2.0 server.
Using the internal URL I am able to access CRM without entering my details (as expected)
Using the external URL I am authenticated by ADFS as expected and can sign in.
We have an internal domain domain.local
We have an external domain domain.com (the certificate is for *.domain.com)
We have a DNS zone created internally for domain.com.
CRM URLs
internal : internalcrm.domain.com
External : externalcrm.domain.com
I would like all users to use the same link regardless of them being internal or external, but I would like so that any user who is on the domain is automatically logged in without entering their username and
password. What is the best way to do this?
I have tried creating a cname record on the internal domain.com zone pointing externalcrm.domain.com to internalcrm.domain.com but that didn't work, I still get the ADFS sign in page.
Thanks

So fair warning, what you're asking for isn't really a supported deployment method of CRM.
That said, you should be able to do some DNS trickery internal to your network that points your "crm.domain.com" to "crm.domain.local" and then hopefully CRM will treat the connection as if it came from an internal network.
Otherwise, you're likely going to have to accept that everyone gets the ADFS login page internal and external to your network.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4. Please help

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4.
Please help
Latheesh K Contact No:+91-9747369936

This forum supports .NET Framework setup.
As your issue appears to have nothing to do with .NET Framework setup, please ask in the MVC forums for best support.
http://forums.asp.net/1146.aspx/1?MVC

Do view life time and view recent property apply for external URL from crawling?

Hi All,
I wonder that do viewlifetime count and viewrecents apply for the external URL from the crawler?
I saw it does work for local SharePoint URL but not too sure for the external URL.
And in that case, is it possible to sort the search result by viewlifetime/viewrecent for both Local SharePoint Sites and External Site from crawler?
Best Regards,
Andy

Hi,
According to your post, my understanding is that you want to use viewliftime and viewrecent property when crawing external URL.
Per my knowleage, the viewlifetime and viewrecent property does not apply for external URL from crawling.
In my environment, I can edit the refinement panel in search center page to display viewlifetime and viewrecent when I crawl SharePoint Sites.
However, when I crawl external site, in the search center page, I cannot get any information about the result items.
Here is a great blog about how to crawl external site for your reference:
http://www.bluesphereinc.com/blog/utilizing-the-power-of-sharepoint-search-part-1-centralizing-search-results-from-mulitple-sources/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Data transfer between external URL and IC WebClient

Hi All,
In IC web we are launching an external URL how can we fetch the data of the external URL to IC Web interaction record.
Thanks,
Raj.

If it is not much data..you can use query string..

Transaction Launcher : How to get return parameters from an external URL

Hello,
We need to launch an external URL in the Web Client UI. After the URL is launched, the user does some processing which results in some output values. These value have to be passed back to the Web Client UI and become a part of the quotation he is creating.
We are able to launch the URL using the Transaction Launcher. But we are not able to find a way to get the output values from the external URL to the Web client UI.
Please suggest any approach for this. It is OK even if we need to use an intermediate BSP to launch the external URL.
Regards
Ajay

hi ajay
I had a similar requirement , when the user clicks on button I want to launch the External URL , can you please let me know how to launch the external url when the user cliks on button
Thanks & Regards
madhu

PrepareRedirect and external URL

Similar Messages

Maybe you are looking for