Preposition size limit was exceeded

Hi Everyone,
I have a preposition job that's trying to copy a folder roughly 108GB in size (comprised of subfolders and files). I have the job running nightly and it always terminates after several hours copying about 27GB of data saying, "Preposition size limit was exceeded." I understand that we might be running into the reserved cache limit, and I have already set the preposition to use 100% of the cache.
My question is, if this job terminates after copying 27GB of the 108GB, what happens the next time this job starts on the next scheduled iteration the following night. Right now, it is set to "Files changed since last preposition." Will the preposition resume where it last Status:Terminated or will it start over since it wasn't Status:Complete task (ie. I'll never copy the full 108 GB since it keeps starting over)?
The versions of the two WAAS devices on each end:
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2012 by Cisco Systems, Inc.
Cisco Wide Area Application Services (accelerator-k9) Software Release 4.4.7 (build b4 Apr 25 2012)
Version: nme-wae-502-4.4.7.4
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2012 by Cisco Systems, Inc.
Cisco Wide Area Application Services (accelerator-k9) Software Release 4.4.7 (build b4 Apr 25 2012)
Version: oe512-4.4.7.4
Thanks,
JP Babiera

Hi JP,
I was digging into details and i got this in user guide:
Step 4 Ensure that the Status column shows Completed.
If this column shows a failure, look in the Reason column for an explanation that can help you troubleshoot why the preposition task failed. After resolving the issue, you can schedule the preposition task to run again now, or wait until the scheduled start time and check the status again later
So looking at this explanation it does seem that prepositioning should resume where it actually left off.
For more details please visit the below link and section: Checking the Preposition Status
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v413/configuration/guide/filesvr.html#wp1043724
Regards,
Kanwal

Similar Messages

CTI warning: The request failed because the timeout limit was exceeded.

hi,
For a perticular IP Phone extension when agent is going to login using CTI agent toolkit then CTI generatin this msg "CTI warning: The request failed because the timeout limit was exceeded". but the other ph is working fine. I have deleted this phone and add againg. And the ph re-associate with PG and JTapi user. but still have the prob. For more plz see the find attached.

Your first troubleshooting step here should be to check what JTAPI Gateway thinks is the state of that extension, you can easily check that through procmon. Here's an example from my lab.
C:\Documents and Settings\Administrator>procmon ipcc pg1a jgw1
>>>>jdi 2000
>>>>
Addr: 2000      ActiveLines: 0          RegistrationState: IN_SERVICE
        m_CurrentInvokeID = 0
        m_elapsedTPServicesRequestSeconds = 0
        queuedDTMFDigits = null
        sendingDTMFInProgress: N
        sendQueuedMsgAddCallObserverResponse: Y
        monitoredVirtualDialerPort: N
        virtualDialerPort: N
        loggedInAgent: N
        DeviceStatus : UnmonitoredDevice
        addressDeviceType : GWMSG.DEVICE_TYPE_DEVICE
        observeredTypeString : logged Out Agent Device
        isAddressRestricted: N
        addressDeviceProtocol : PROTOCOL_SCCP
        silentMonitorStatus : 0
        silentMonitoredCallID : -1
        TerminalName : SEP001BD52C547F
The RegistrationState should be IN_SERVICE for a phone that is registered with CUCM. If you can see that the phone is registered with CUCM in it's adminsitration pages, made sure that it's in the list of associated devices, made sure you're running the correct version of the jtapi plugin and still see it as OUT_OF_SERVICE, you're probably looking at a CTI Manager defect. CSCti07947 and CSCti11651 spring to mind but there are probably a couple more.
Most of these defects should be fixed in releases like CUCM 7.1(5), 8.0(x) and up. If the issue persists, you're probably best off opening a TAC Service Request to identify the exact cause. The PG (JTAPI Gateway) only shows you what it gets from CTI Manager, so as you can see from my above observations, you'd want to focus your troubleshooting on the CUCM end.

The administrative limit for this request was exceeded.

Hi,
Am getting below error while adding machine to domain
C:\>netdom join W2K12R2-DC-161 /domain:winvm.com /userd:Administrator /passwordd:cvm@123 /REBOOT
The administrative limit for this request was exceeded.
The command failed to complete successfully.
Even while trying to delete some entries from registry gives below error
ADSIEdit
Operation failed. Error code: 0x2024
The administrative limit for this request was exceeded.
00002024: SvcErr: DSID-0215030C, problem 5008 (ADMIN_LIMIT_EXCEEDED), data -1069
OK
Please help me urgently
I have searched on below links but could not get the correct workaround steps
https://social.technet.microsoft.com/Forums/windowsserver/en-US/83087f21-ba51-414d-9202-badea56ba83b/administrative-limit-was-exceeded
https://social.technet.microsoft.com/Forums/en-US/fea67c92-8dab-4711-8579-baaee4bca3f7/the-administrative-limit-for-this-request-was-exceeded?forum=identitylifecyclemanager
Nilesh Savant

Hi Nilesh,
Before going further, are we using domain admin account to use netdom and adsiedit.msc? Whether it is true or not, please try another admin account to check if the issue persists. Besides, to use netdom, we must run the
netdom command from an elevated command prompt. If the issue persists, please try to join the machine to the domain from the machine itself to see if it can be successful.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

What is the size limit of mbox files in Leopard Mail 3.0 ?

What is the file size limit of mbox files in Leopard Mail?
e.g. a main folder -- that contains no actual emails -- but contains many sub-folders each of which have an mbox file.
Each mbox file has a limit, but because the main folder has several mbox files/subfolders, it means that the size of the main folder gets very large.
Question: is there is a size limit for the main folder, even though there is no mbox file associated with the main folder (since it merely acts as a folder for subfolders)?
Question: what is the practical limit for each mbox file -- theoretical and practical? i.e. what size should we not exceed in order to avoid corruption?

I've been researching for the same answer. And technically speaking, I don't have one. In the past, I've "heard" that the mailbox size limit was something like 1GB for Mail (OS X 10.3) and then something like 2-4GB for Mail (OS X 10.4). I have searched all over the place in technical documentation and can't really get a good answer. I'm almost leaning towards believing that there is no limit, based on the fact that the database that mail is using (particularly for OS X 10.4) is BerkeleyDB 4.2.52 and that DB doesn't have a size restriction. I'm not sure if that is the only factor involved though. I've tried researching the limits for KMail, which is the mail program that runs on KDE (Linux), which is the program that Mac OS X Mail is based off of... and I can't find anything there either. Most people say, "It's a free app, so don't expect much," but I'd rather use Mac OS X Mail than most anything else. I hope that maybe someone from Apple... or someone else who can reference technical documentation can help out. Thanks!

How to reset site after data transfer limit is exceeded

hi everyone
i wonder if you can help me, i exceeded my data tranfer limit on the 9th of the month, as i published a new site many people viewed it and the limit was exceeded quickly. now it is the 16th and the site is still unavailable. why is this? can anybody help me sort this out? its just a few photos and one small video. its rather frustrating,
thanks very much
mac oX Mac OS X (10.4.7)
mac oX Mac OS X (10.4.7)

Sounds like a question for Apple/.Mac support???

Want to know Maximum size limit for TimesTen version 5.1.x

Hello,
I know that in prior releases the maximum TimesTen database size limit was 2GB.I got this info from one of the TimesTen documentation.
As of now Im using version 5.1.x.Here Im not able to get any info regarding the maximum size limit of a TimesTen datastore. Please help me
Thanks In Advance
Pratheej

Also be aware that on Windows you can rarely achieve a data store size of >1g
It's down to the way Windows handles it'd DLLS - they tend to get loaded in a fragmented way and since TimesTen needs one contiguous slice of shared memory this causes a problem.

Quota size limit

My bb won't send any email saying "the quota size limit is exceeded". I've tried deleting several emails and still not working! I've removed batttery ad reset and still not working. Help anyone?

That likely means your POP email server is full.
What type of email service do you use?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

DBIF_RSQL_INVALID_RSQL The maximum size of an SQL statement was exceeded

Dear,
I would appreciate a helping hand
I have a problem with a dump I could not find any note that I can help solve the problem.
A dump is appearing at various consultants which indicates the following.
>>> SELECT * FROM KNA1                     "client specified
559                  APPENDING TABLE IKNA1
560                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUFFER
ST22
What happened?
    Error in the ABAP Application Program
    The current ABAP program "/1BCDWB/DBKNA1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    The SQL statement generated from the SAP Open SQL statement violates a
    restriction imposed by the underlying database system of the ABAP
    system.
    Possible error causes:
     o The maximum size of an SQL statement was exceeded.
     o The statement contains too many input variables.
     o The input data requires more space than is available.
     o ...
    You can generally find details in the system log (SM21) and in the
    developer trace of the relevant work process (ST11).
    In the case of an error, current restrictions are frequently displayed
    in the developer trace.
SQL sentence
550     if not %_l_lines is initial.
551       %_TAB2[] = %_tab2_field[].
552     endif.
553   endif.
554 ENDIF.
555 CASE ACTION.
556   WHEN 'ANZE'.
557 try.
>>> SELECT * FROM KNA1                     "client specified
559                  APPENDING TABLE IKNA1
560                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUFFER
561    WHERE KUNNR IN I1
562    AND   NAME1 IN I2
563    AND   ANRED IN I3
564    AND   ERDAT IN I4
565    AND   ERNAM IN I5
566    AND   KTOKD IN I6
567    AND   STCD1 IN I7
568    AND   VBUND IN I8
569    AND   J_3GETYP IN I9
570    AND   J_3GAGDUMI IN I10
571    AND   KOKRS IN I11.
572
573   CATCH CX_SY_DYNAMIC_OSQL_SEMANTICS INTO xref.
574     IF xref->kernel_errid = 'SAPSQL_ESCAPE_WITH_POOLTABLE'.
575       message i412(mo).
576       exit.
577     ELSE.
wp trace:
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT-SYS< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT-SYS< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT-SYS< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >DISPLAY_SY_SUBRC_TEXT< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPLSTPDA_CARRIER< >0700< [dypropbag.c 643]
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT-SYS< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT-SYS< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT-SYS< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >DISPLAY_FREE_VAR_TEXT< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPLSTPDA_CARRIER< >0700< [dypropbag.c 643]
I thank you in advance
If you require other information please request

Hi,
Under certain conditions, an Open SQL statement with range tables can be reformulated into a FOR ALL ENTRIES statement:
    DESCRIBE TABLE range_tab LINES lines.
    IF lines EQ 0.
      [SELECT for blank range_tab]
    ELSE.
      SELECT .. FOR ALL ENTRIES IN range_tab ..
      WHERE .. f EQ range_tab-LOW ...
      ENDSELECT.
    ENDF.
Since FOR ALL ENTRIES statements are automatically converted in accordance with the database restrictions, this solution is always met by means of a choice if the following requirements are fulfilled:
1. The statement operates on transparent tables, on database views or on a projection view on a transparent table.
2. The requirement on the range table is not negated. Moreover, the range table only contains entries with range_tab-SIGN = 'I'
and only one value ever occurs in the field range_tab OPTION.
This value is then used as an operator with operand range_tab-LOW or range_tab-HIGH.In the above example, case 'EQ range_tab-LOW' was the typical case.
3. Duplicates are removed from the result by FOR ALL ENTRIES.This must not falsify the desired result, that is, the previous Open SQL statement can be written as SELECT DISTINCT.
For the reformulation, if the range table is empty it must be handled in a different way:with FOR ALL ENTRIES, all the records would be selected here while this applies for the original query only if the WHERE clause consisted of the 'f IN range_tab' condition.
FOR ALL ENTRIES should also be used if the Open SQL statement contains several range tables.Then (probably) the most extensive of the range tables which fill the second condition is chosen as a FOR ALL ENTRIES table.
OR
What you could do in your code is,
prior to querying;
since your select options parameter is ultimately an internal range table,
1. split the select-option values into a group of say 3000 based on your limit,
2. run your query against each chunck of 3000 parameters,
3. then put together the results of each chunk.
For further reading, you might want to have a look at the Note# 13607 as the first suggestion is what I read from the note.

Error 4.7.1 message exceeds size limit, but it doesnt

I am receiving this error every time I try to send a message.
The size of the message you are trying to send exceeds a temporary size limit of the server. The message was not sent; try to reduce the message size or wait some time and try again. The server responded: 4.7.1 <[email protected]>: Recipient address rejected: [email protected] exceeded daily recipients threshold . See http://postmaster.frontiernet.net.
This happened randomly and without provocation. I have talked to my mail provider and they are telling me that it is an internal error. They have checked my connection settings and everything is set up properly. The messages i am sending are just test messages with one word in them.

Did your provider also tell you that mime encoded attachments are about 30% larger than the original file size of the attachment. So a 4Mb attachment would exceed a 5Mb limit.

Size Limit of Result Set Exceeded in Advanced Analysis for Excel

I am getting a "Size Limit of Result Set Exceeded" error when performing a drill-down in Advanced Analysis for Excel. Is the limit 65,000 rows in Excel? I was able to get a drill-down of 39,000 rows to work, but failed when I exceeded 60,000 rows.
I am using Advanced Analysis for Excel v1 SP5 and Excel 2007.
Thanks.

Hi Everyone;
I am running advanced analysis reports on HANA as datasource and I am getting the message Size Limit of Result Set Exceeded whenever I have a larger output. I have noticed that in the admin guide and in other SCN posts about this setting in Windows Registry:
[HKEY_LOCAL_MACHINE\Software\SAP\AdvancedAnalysis\Settings\DataSource]
"ShowBicsSample"="True"
"ResultSetSizeLimit"="-1"
But I am having hard time finding this setting in my windows registry; can someone help me understand why I don't have it in my registry? and how to find it and change this setting?
FYI...I am using Office 2010.

Maximum package size for data packages was exceeded and Process terminated

Hello Guru,
When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
Thanks & Regards,
Suresh.

Hi,
When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
You can also try RSCUSTV* where * is an integer to change data load settings.
Change Datapackage size for extraction, use Transaction RSCUSTV6.
Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
Hope this helps.
Thanks,
JituK

Maximum package size for data packages was exceeded?

Hi Experts,
I am facing this problem "Maximum package size for data packages was exceeded". When I am trying to laod. I even tried to reduce data packet and change DTP settings in EXtraction to Get All New Data Request by Request but still same error is occuring. Can u Plz focus light on this.
Thanks,
Krishna

You can refer to the below OSS note:
Note 1144332 - Consulting note: Message RSBK 250: Package size exceeded
And other related notes: 352038, 417307
Hope this helps.
Murali

Purchasing Ability to Exceed Message/Attachment Size Limit

Is it possible to purchase the ability to exceed the message/attachment size limit on iCloud? I keep running into it when I need to send out PDF image files.

I'm afraid not.

EPrint - Message Exceeded Size Limit

I received an error message using ePrint that message exceeded size limit. It seems that 5MB is the limit. Are there solutions for larger files, i.e. winzip? Thanks.

Hi Igcgf,
As of right now the size limit is 5 MB as reviewed here about size limits. Also, a winzip file, which may hold supported file types such as PDFs, is not a supported file to be opened up and sorted through for printing purposes. It is best to take files out of the winzip file and attach to an outgoing email to your ePrint address.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

Email providers often set file size limitations to conserve bandwidth and prevent service overload. Most common seems to be a limit on the order of 21 MB. If possible, break your presentation into two parts and send as two messages.

Preposition size limit was exceeded

Similar Messages

Maybe you are looking for