Presenter 7 Question Description for SCORM Interactions

I am trying to support a client using our LMS. He is creating SCORM 2004 content with quizzes using Adobe Presenter 7. He has chosen to report question-level details for the quiz interactions. All data comes through in the LMS just fine, except for the question description. So, what you get is a list of the answers the student entered compared to the correct answer, without any identifier about what the question is that is being answered. Without the question name, text, or description, the interaction data is useless. Where in Adobe Presenter can he add the question description?  If not in Presenter, then can it be added as a tag in the quiz XML file? What should the tag be, and where should we add it? The question description text is a feature that is supported by SCORM 2004, so it should be possible to add. I have personally created tests in Lectora that populate this field in our LMS.
Results reported from the Presenter Quiz in our LMS:
Results reported from a Lectora Quiz in our LMS:
Thank you!

SG,
If I read your question correctly, the ability to capture the results at the "question level" is going to be a Connect feature for sure.
As with Dr. C's response indicating that Moodle & Blackboard LMSs track Presenter content, I can also tell you that Presenter content is also tracked on Docent, Knowledge Planet &  GeoLearning LMS platforms, just to name a few.
However, just understand that although Presenter content can pass SCORM data, it's ability to communicate which selection a learner picked to answer a question is a Connect feature that most of the other LMS platforms cannot account for.
Rob
http://www.robrode.com/yabb/

Similar Messages

  • The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
    installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    Thanks
    Suresh
    Suresh

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0
    from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
    Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
    temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    We are using VS 2013 (premium) and IE 10.0,  scripts have been created on the same versions. It is working fine  on
    developers command prompt but the same tests are getting failed in lab center test agent machine
    test agent log:
    QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
    QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
    QTAgentService.exe, AgentPro
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentService: Connection to controller is up.
    Thanks
    Suresh

  • How do I identify Presenter Questions in a LMS report?

    Hi,
    We've put together 25 questions in Presenter and set it up to report from our LMS (e2train).
    We need to know what users answer for each of the questions and can pull off a report that shows the results ok.
    The problem is that we have no identifier for the 25 questions.
    For each user the report shows the following columns:
    Description (blank for all 25 qs);
    Type (q type),
    Learner Response (What they selected);
    Result (correct or incorrect).
    How do I get Presenter to identify each question?

    Hi,
    Can you display what code you used for this? I followed note 172045.1 and everything compiles properly but when I run the report, I just get a box with a red X in it, like it is not finding the picture. I ran the procedure that downloads the image and it works fine from there. Thanks.

  • I have albums in my iMAC with description for each photo that I can show up on slide show so that I know the place that is in the photo. If I synchronize my photos to iPOD, I am unable to get the Descriptions also copied. How do I ensure this?

    I have two questions:
    1) I have multiple logins in my iMAC. How do I move photos/albums from one login to another?
    2) I have created albums with "Description" for each photos, so that, in a slide show, any one can see what is being shown on the photo. When I sync albums to my iPOD, the "Descriptions" are not getting copied. How do I ensure that the "Descriptions" also get copied so that it can be a real back-up?
    Thanks

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto thumbnails - this may take several tries
    Also what version of iPhoto? What recently changed?
    LN

  • How to find out the description for the given field?

    Hi All,
    How to find out the description for the given field?
    I mean ETTYP  Desription is VTEXT. This we can find in TVEPT  Table. So, How canwe find this?
    Thanks in Advance
    Sri...

    Hi  Avi,
    If i want to disply the  fields like   AUART and 'Description of AUART',
    Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
    my question is if i have given T184-AUART  and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
    Thanks in Advance
    Sri...

  • Title and description for lookup column

    Hopefully this can be simple.  I am working on development in SharePoint 2010 but I do NOT think that it is specific to 2013 or 2010, I am migrating to 2013 in a month or so (hopefully!)
    Requirement:
    Display lookup list for Server Name (Title) and Server Description (Description)
    Problem:
    I have a custom list with 2 columns, title and description, both text fields.  I am using that list as a lookup to my other custom list.
    The graphic below has 2 windows squished into it.  The middle window is the list pulling the data from, the lookup list.
    The graphic to the right is the issue that I am running into.  I create the column and hopefully I can use the lookup column with the title column AND THEN the additional fields for the Description!  It DOES appear, but AFTER I fill out the form. 
    The form is on the left part of the graphic below.
    I see the server names or "Title" but I can't even "hover" over it and see the description!  I don't know how to present the description lookup in the form when I do "new item."  Is this something that 2010 / 2013
    can do and OOTB or do I need designer? I don't code so I can't use VS.
    Thank you!
    Matt

    Thank you, I created a calculated column, using Microsoft's recommendations below, and Scott's!
    Calculated Field Formulas -
    http://msdn.microsoft.com/en-us/library/bb862071.aspx
    The result shows below.  the 3rd column is the Server and Description, with the calculated column, "merging" the two text into one, with a space and a dash in the middle to separate them.  The list is below and the "look up".  The black section
    is my new form or add new item, where I would select multiple servers based on their server name and their description.

  • Can you provide descriptions for a Windows Computer in SCOM 2012?

    I have a customer who uses a very generic naming scheme for their desktops which makes it hard to know which machine is which.  The naming scheme basically uses a 3 letter acronym for the departments followed by a set of 4 numbers.  So it looks
    something like this COM-0103 and when you have a long list of hundreds of machines like that it makes it difficult to know where you need to go and/or who you need to contact when a machine is throwing alerts.
    So my question is whether or not there is a way to provide a description for a computer that will have the owner's name or the location of the machine.  Obviously renaming all of the computers would solve the issue, but that's out of the question.  Also
    the customer has access to SCOM through a Read-Only Profile and they are only able to see the Monitoring section through the console.
    Any ideas or suggestions on how to better identify machines in SCOM, if their names aren't helpful, would be very useful to me and my team.  Thank you in advance!
    Jake

    Hi Jakob,
    Please look at this post, instead of support level you can use your company data, an object can be used in SCOM Monitoring views to sort:
    http://blogs.technet.com/b/kevinholman/archive/2009/06/10/creating-custom-dynamic-computer-groups-based-on-registry-keys-on-agents.aspx
    Natalya
    ### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

  • Description for list of errors in log file

    Hi,
    Is there anybody out there that would have a description for the list of errors we can get in crawl log file.
    For example I would like more info and how to fix these errors...
    WKG-30199
    WKG-30201
    WKG-30005
    WKG-30007
    WKG-30008
    WKG-30009
    WKG-30013
    WKG-30018
    WKG-30027
    WKG-30041
    WKG-30083
    WKG-30126
    If anybody can help me find a description of these errors that would be great. How to fix them event better.
    thanks

    I am not sure about all the errors but lets build up slowly.
    Following are Authentication related errors:
    WKG-30007: Authorization required.
    WKG-30199: Authentication
    WKG-30201: Missing authentication credentials
    WKG-30025, WKG-30164 are both related to connection between the crawler and the target. Errors appear when ssl connection could not be establised or the ssl certificates have expired.
    I am afraid there is not much documentation where the problem and solutions could be dug out.
    HTH
    Aravind
    WKG-30146: Cookie Tracing: 'display cookie obtained from target server'
    WKG-30145: Cookie Tracing: New cookie domain ".XYZ.com" created
    WKG-30147: Cookie Tracing: ' Sending the cookie back to the target server in responce'
    WKG-30027: Not allowed URL: 'This occurs when the link(domain) in page being crawled/indexed is not in the inclusion policy
    WKG-30083: http://xyz.com/xyx : Duplicate document ignored 'This occures when the url in question has already been indexed, HINT: signature hash value of each url is stored in the wk$url table'
    WKG-30008: URL in question NOT FOUND.
    Message was edited by:
    [email protected]

  • Deadline for an interactive activity

    In the process, there is an automatic activity (A) before an interactive activity. Please let me know how to set the deadline for the interactive activty through A.
    The requirement is regarding setting up the SLA for an instance for every interactive activity. The instance should be highlighted in red once the SLA is crossed. I know how to customize the workspace for this. I am looking at how to set up the deadline (SLA) through code based on certain conditions.

    If you want the instance to remain in the Interactive activtiy even though the deadline has passed, you might not want to use a Due transition. The Due transition's whole purpose is to fire and have the work item instance flow through it after the time period specified inside the Due transition's property elapses.
    You might want instead want to create a new project variable that represents some time in the future for the work item instance. This would have to be a time variable since an instance sitting in an Interactivity won't be able to indicate that a time period has elapsed except by comparing the current time with the time value you set in the project variable's time variable.
    I'm not sure that the deadline predefined variable is a fit for what you're trying to do. You'd use the deadline predefined time variable to set an SLA for the entire process. Once this time period expires, the engine will fire an exception (an "InstanceExpiration" exception) that would need to get caught by an Exception Handler activity somewhere inside your process.
    When you create a Due transition for an activity, it's a different type of SLA. It sets an SLA for a specific activity (vs. the entire process). You're not going to find much joy in trying to set the predefined variable activity.deadline. This is automatically set by the engine when the engine sees that an activity has a Due transition. The engine sets this time to the time in the future established by the Due transition. This is a read only predefined variable that you won't be able to set. Instead, consider creating and setting a new project time variable I mentioned above that you can check to see if the time has elapsed by comparing it with the current time.
    To make a primitive instance variable (e.g String, Decimal, Time, etc.) available to a JSP, create a BPM Object with attribute(s) corresponding to the instance variables you want passed to the JSP. Prior to the Screenflow's Interactive Component Call task where you present the JSP, you'd just need to set the primitive instance variable(s) to the attributes in the BPM Object.
    Hope this helps,
    Dan

  • Missing description for FI standard values (ie posting key 40)

    Hello,
    I'm deploying the SAP ECC6 Financials solution in French and I'm facing a very strange issue. The standard descriptions for some very classical SAP values are missing in my language (French). For instance, the french description is blank for all the standard posting keys (eg posting key 40 with text "blank"), for all the SAP standard Account groups (eg SAKO), for all the valuation classes, etc. When I connect in english, everything is OK with standard english text. I have the same problem with CO. The French text in other modules (SD, MM) seem ok.
    Two questions hence:
    - is it an SAP installation problem or a FI customizing issue ?
    - there is already some customizing in this environment using those values. What would be the impact of reactivating the texts in french ?
    Thank very much for your answer.

    Hi,
    Check with basis (Tcode: SMLT)
    I could not check it as i dont have authorization in my system.
    Regards,
    Sridevi
    <i>* Pls. assign points if useful</i>

  • Set a description for a File object

    Hello, I have to do a File saving task. I have a directory when I place my files. When i press "Save", a dialog appears and a table lists all my files from that directory. Each file must have a description. My question is how to set a description for a file, and also, how to get back that description. 10ks

    public class ExtractionSetFile extends File {
         private String description;
         public ExtractionSetFile( String pathname ) {
              super( pathname );
         public void setDescpription( String descpription ) {
              this.description = descpription;
         public String getDescription() {
              return description;
    }

  • Cookbook for Employee Interaction Centre

    Hi Guys,
    Is there any cookbook available for Employee Interaction Centre (EIC) present in CRM2007 or CRM7.0
    Regards
    Vivek

    check the below wiki link if it can help.
    http://wiki.sdn.sap.com/wiki/display/CRM/Interaction+Center

  • Applescript keeps stopping for user interaction

    I use this great applescript for turning my indesign layers into photoshop layers:
    http://www.zenodesign.com/scripts/PagestoPSLayers.zip
    It asks for a folder to put a temporary pdf, then asks some preferences (indesing pdf export preset, color mode, pagenumber, resolution and anti-alias on or off). Then the script should run fine untill all indesign layers are nicely turned into rasterized photoshop layers.
    This used to work perfectly untill today i had to use the script again. For some reason the script keeps stopping for user interaction.
    Photoshop gives me the "Open" dialog box, then the "Import PDF" dialog box (not using the settings that the script asked for), the same "Open" and "Import PDF" dialog boxes for the next layer, then a dialog box to name a duplicated layer, the "Close document" dialog box, the "Preferences" dialog box, "Canvas Size" dialog box... you get the point.
    All stuff the script should do automatically.
    I'm not into scripting myself but it used to run fine without presenting me all these dialog boxes. Any help appreciated!

    Try putting this statement first
    tell application "Adobe Photoshop"
    set display dialogs to never
    end tell
    and then add the same at the end but say
    set display dialogs to always

  • Business content for CRM Interaction center

    Hi Experts,
    I have requirement in BW CRM interaction center.I need to analyse Fit Gap Analysis for CRM interaction center.I need to give the explanation either the client requirement can be implemented with business content or need to customise.I am looking some one can throw light on this topic.I am new to this requirement.I would like to know where can I find the Business content reports and extractors related to CRM interaction center in BW.Please shed some light.
    Thanks,
    Suryam.

    The same question
    I read documentation and found:
    1) 0CRM_CIC_INTERACTION
    2) 0CRM_CIC_CTI

  • Creating a Better Description for the Change Management forum

    Hi Community,
    You are invited to post suggestions <a href="https://forums.sdn.sap.com/thread.jspa?forumID=200&threadID=249364">to help clarify this forum descripton</a> for the Change Management forum (as a posted to a Change Request forum)
    Hint: I'm hoping that we will be discussing Change Management which includes Business Process Improvement changes, new paradigms, new role definitions and not merely application improvements and changes.
    Also, I invite good definitions for a separate technical forum to be created to discuss Transport and Change Requests questions as those seem to be the ones that frequently populate this forum.
    Help us help the community to know where to post appropriate queries.
    Marilyn

    Hello Marilyn,
    thanks a lot for the new thread!
    Why not use your description, for me, it explains what I'm hoping for in this forum:
    We will discuss Change Management which includes Business Process Improvement changes, new paradigms, new role definitions, and all changes that are needed to make an organization fit for the ESOA requirements.
    I'd still suggest "organizational change management" as the new name.
    For the technical change management I'd suggest the term "SAP change and transport management" - I think everyone dealing with SAP will understand.
    A description for the change and transport forum:
    This forum deals with issues concerning technical changes to SAP systems, may it be transports within the ABAP world or SDM questions and problems.
    From my point of view it would be good to provide a link to "the other forum" from both of these forums.
    Kind regards,
    Carl

Maybe you are looking for