Preset upload-directory

Is there any way to preset the GUI-Directory for FileSaveDialog or FileOpenDialog <b>without</b> dialog?
Whenever pressing Open File in the program the user will get the same directory.

Hello Mathias,
wasn't your Question answered there: /thread/84965 [original link is broken]?
Regards
Gregor

Similar Messages

Upload Directory Configuration Problem in jdev 10.1.3.2 adfbc

I am configuring a file upload utiltity. By default my files are created in /tmp directory i.e on c:\tmp folder. I intend to change this behaviour as i want this to be uplaoded into a drive other than c:\
When we define the upload directory i have specified d:\amitupload\ files are uplaoded properly. But the problem is downloading the same. Its giving me nullpointer exception.
What am i doing wrong. I followed the SRDemo Steps for file upload/download
regards
Amit

Frank can we have UPLOAD_DIR defined as d:\uploaddir for windows or /app/uploads for linux operating system
I am doing this way this method is called on download button action.
My problem i could resolve the issue as my uploaddoc method was executed on value change listener attached on the input file component. So when i clicked on download this uploaddoc method is fired which cannot find the file in the input file component so the error message as null pointer exception.
I shifted the code to upload button action now its working fine.
thanx
public String onDownload() {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vb = fctx.getApplication().createValueBinding("#{row.AddudFilePath}");
Object documentName = vb.getValue(fctx);
if(documentName !=null){
File srcdoc = new File((String)documentName);
if (srcdoc.exists()) {
FileInputStream fis;
byte[] b;
HttpServletResponse response = (HttpServletResponse) fctx.getExternalContext().getResponse();
// file should be downloaded without display
response.setContentType("application/x-download");
response.setHeader("Content-Disposition", "attachment; filename="+srcdoc.getName());
response.setContentLength((new Long(srcdoc.length())).intValue());
OutputStream out;
try {
out = response.getOutputStream();
} catch (IOException e) {
// TODO
e.printStackTrace();
// no error message shown to the user. Consider adding a Faces
// Message
return null;
try {
fis = new FileInputStream(srcdoc);
System.out.println(fis);
int n;
while ((n = fis.available())> 0) {
b = new byte[n];
int result = fis.read(b);
out.write(b, 0, b.length);
if (result == -1) break;
catch (IOException e)
e.printStackTrace();
return null;
try {
out.flush();
out.close();
} catch (IOException e) {
// TODO
fctx.responseComplete();
return null;
}

Allowing To Select Upload Directory in Webserver

I'm required to improve my upload webpage so that user are allowed to choose which folder in the webserver into which they can upload some files. Since I haven't been that long working with Java and JSP, I had no luck solving this problem.
Can anyone kindly give me some advice as to how to achieve this? Website with such feature will help too.

there is no easy solution.
You will have to create a browser for the upload file directory where the users are allowed to downlaod too, in that browser users select the path and you need to retrieve it to do the actual download.
Most web containers use it to allow you to upload things but i have seen a package for it yet,.

My FTP upload - Directory / Path?

Can anyone advise me what should go into the Directory/Path box when publishing via FTP?
Thanks,
TIm

Directory/Path is the path to the root folder on your server.
This will depend on the arrangement on your server but would normally be something like: domainname.com/
If you enter the IP number in the Server Address box you can often get away with leaving the Directory/Path box empty. Its not really required unless you are uploading to a sub folder.

Image upload directory or server

I want to upload imges file into directory and want to use
for Database. I could not get any option in the Form of Dreamweaver
for image uploading.
please help me

Dreamweaver does not come with any file upload scripts. You
need to either create the script yourself or locate one on the web
appropriate for the scripting language you are using.

Displaying of uploaded directory in a tree structure using servlet

I have uploaded a directory at the server side.I want to diplay the whole directory in tree form at the client side.I don't want to use Jtree or swing option neither applets.I want to do it using Java Server Page.But I am not able to do it??COuld anyone sujjest a method or can send me a piece of code that may help me to do this...Looking forward for your Brainstorming replies....and codes....

Could you please explain it more and if possible can u give piece of code??I will be grateful to you...

Upload Directory

Hi Friends
Can anyone help me in this problem.
1.I have to select the particular path
Ex: c:\new folder\prog
2.Then i want to display the list (file names) in that particular folder in ABAP .
Ex: in prog i have 5 excel files.i want to display the list(file names).
Regards
Kiran

please search for the same in the forum.
this is the result from the search..
report ztests.
data : file_table like table of SDOKPATH with header line .
data : dir_table like table of SDOKPATH with header line .
data : file_count type i ,
dircount type i .
parameters:p_dir(50) type c.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
DIRECTORY = p_dir
FILTER = '*.TXT'
IMPORTING
FILE_COUNT = file_count
DIR_COUNT = dircount
TABLES
FILE_TABLE = file_table
DIR_TABLE = dir_table
EXCEPTIONS
CNTL_ERROR = 1
OTHERS = 2.
write:/ 'no of files in the floder is : ', file_count .
skip 2.
loop at file_table .
write:/ file_table-PATHNAME.
endloop
Edited by: Venkat Appikonda on Apr 15, 2009 11:31 AM

How can I make Firefox 4's "File Upload" window start in the same directory across all sites?

I upload webcomic image files to multiple sites every day--the same file to multiple sites--through the "File Upload" window that comes up in Firefox when you click on a site's "Browse..." file request field.
In Firefox 3 (under Windows XP), when I used Firefox's "File Upload" window to upload files, the "File Upload" window would come up showing the last directory from which I'd uploaded anything to ANY site.
In Firefox 4, on the other hand, the "File Upload" window comes up showing the last directory from which I last uploaded to that specific domain.
I'd like to know if there's an about:config setting--I couldn't find one when searching for "file," "upload," or "dir"--to revert to the Firefox 3 behavior. The reason is that now in Firefox 4, because I typically upload two files to four different web sites per day--one file to all four sites, then later in the day, a second file to all four sites--I have to switch from the first upload directory to the second upload directory in each of the four "File Upload" windows for the second file, whereas in Firefox 3 I only had to do that once. Here's how it used to go:
In Firefox 3:
# "File Upload" for file 1 at smbhax.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at drunkduck.com: desired local directory is already selected.
# "File Upload" for file 1 at smackjeeves.com: desired local directory is already selected.
# "File Upload" for file 1 at comicfury.com: desired local directory is already selected.
# "File Upload" for file 2 at smbhax.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at drunkduck.com: desired local directory is already selected.
# "File Upload" for file 2 at smackjeeves.com: desired local directory is already selected.
# "File Upload" for file 2 at comicfury.com: desired local directory is already selected.
and here's how it goes under Firefox 4:
# "File Upload" for file 1 at smbhax.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at drunkduck.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at smackjeeves.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at comicfury.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 2 at smbhax.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at drunkduck.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at smackjeeves.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at comicfury.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
So basically, where under Firefox 3 I only had to browse through my directories twice per day to upload two files to four sites, under Firefox 4, I have to browse through my directories eight times per day to accomplish the same thing.

You can use the Remember Password bookmarklet: <br />
https://www.squarefree.com/bookmarklets/forms.html#remember_password <br /> ''Has worked for me when I have needed it to save a password on a web site that used autocomplete=off.'' As far as the Bug that '''cor-el''' linked, I can't remember ever running across a website that did it like that.
Or, you can use the Saved Password Editor extension, which includes a means of manually adding Username/Passwords to Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/60265

Upload Form - Uploading to a specific directory.

Ive set up an upload form to upload to a directory, but I
need to be able to pick the directory that I want the file to go
into. Is this even possible without having to buy some developer
kit? Im using DW CS3 and ColdFusion.

Artobahn wrote:
> Whats not worded correctly? I just wanted to know if it
was even possible so I
> didnt see a need to post the code. There is no URL
because I am building the
> site locally. I can set up the upload form up properly
to upload to a
> directory. I just didnt want to create a form for each
directory because there
> will be a bunch of them.
Although you don't realize it, this is worded more clearly. I
can't tell
you the code for it because I don't do ColdFusion, but the
answer to
your problem is quite simple. Create a select drop-down menu
in your
form, and use the value submitted as the upload directory.
<select name="uploadDir">
<option value="images">Images</option>
<option value="docs">Documents</option>
<option value="pdf">PDF Files</option>
</select>
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

How do I delete a file from a directory

I want to delete the file I have finished processing in the c:\upload directory but the f.delete() command is not working. Am I using this command correctly?
The f.delete() is after I copy the file to an archive directory.
Program:
import java.io.*;
import java.util.*;
import java.text.*;
import java.sql.*;
public class ReadSource {
public static void main(String[] args) throws Exception {
     StringTokenizer st1;
          String val1, val3, val4, val5, val9, val10, val11, val12, val13, val14, val16;
          String val2, val6, val7, val8, val15, val17, val18, val19, val20;
          int cnt;
          File f = new File("C://upload" );
          FileWriter outFile = new FileWriter("C://RIFIS/log/logfile.txt", true);
          String filetext = "Starting RIFIS Upload";
          java.util.Date d = new java.util.Date();
          SimpleDateFormat form = new SimpleDateFormat("dd/MMM/yyyy hh:mm:ss");
          String dateString = form.format(d);
     try {
          Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@xxxxx.xxxx.xxx:1521:xx","xxxxxx","xxxx");
                    Statement st = conn.createStatement();
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write(filetext+" - "+dateString);
                    if (f.isDirectory())
                    { String [] s = f.list();
                    for (int i=0; i<s.length; i++)
                    { outFile.write(System.getProperty("line.separator"));
                         outFile.write("Found file - "+f+"/"+s);
          FileReader file = new FileReader(f+"/"+s[i]);
                              File inputFile = new File(f+"/"+s[i]);
                              File outputFile = new File("C://RIFIS/archive/"+s[i]);
                    BufferedReader buff = new BufferedReader(file);
                    boolean eof = false;
                    String val0="";
                    ResultSet rec = st.executeQuery("SELECT landings_hold_batch_seq.nextval FROM dual");
                    while(rec.next())
                    { val0 = rec.getString(1); }
                              cnt=0;
                    while (!eof)
                    { String line = buff.readLine();
                         if (line == null)
                         { eof = true; }
                         else
                         { //System.out.println(line);
                                   cnt = cnt+1;
                              st1 = new StringTokenizer(line,",");
                                   val1 = st1.nextToken();
                                   val2 = st1.nextToken();
                                   val3 = st1.nextToken();
                                   val4 = st1.nextToken();
                                   val5 = st1.nextToken();
                                   val6 = st1.nextToken();
                                   val7 = st1.nextToken();
                                   val8 = st1.nextToken();
                                   val9 = st1.nextToken();
                                   val10 = st1.nextToken();
                                   val11 = st1.nextToken();
                                   val12 = st1.nextToken();
                                   val13 = st1.nextToken();
                                   val14 = st1.nextToken();
                                   val15 = st1.nextToken();
                                   val16 = st1.nextToken();
                                   val17 = st1.nextToken();
                                        val18 = st1.nextToken();
                                        val19 = st1.nextToken();
                                        val20 = st1.nextToken();
                                   /*System.out.println("Token 0: " + val0);
                              System.out.println("Token 1: " + val1);
                              System.out.println("Token 2: " + val2);
                                   System.out.println("Token 3: " + val3);
                                   System.out.println("Token 4: " + val4);
                                   System.out.println("Token 5: " + val5);
                                   System.out.println("Token 6: " + val6);
                                   System.out.println("Token 7: " + val7);
                                   System.out.println("Token 8: " + val8);
                                   System.out.println("Token 9: " + val9);
                                   System.out.println("Token 10: " + val10);
                                   System.out.println("Token 11: " + val11);
                                   System.out.println("Token 12: " + val12);
                                   System.out.println("Token 13: " + val13);
                                   System.out.println("Token 14: " + val14);
                                   System.out.println("Token 15: " + val15);
                                   System.out.println("Token 16: " + val16);
                                   System.out.println("Token 17: " + val17);
                                        System.out.println("Token 18: " + val18);
                                        System.out.println("Token 19: " + val19);
                                        System.out.println("Token 20: " + val20);*/
                                   st.executeUpdate("INSERT INTO LANDINGS_HOLD (lh_id, lh_batch, supplier_dr_id, supplier_unique_id, supplier_dealer_id, supplier_cf_id, supplier_vessel_id, unload_year, unload_month, unload_day, state_code, county_code, port_code, itis_code, market, grade, reported_quantity, unit_measure, dollars, lh_loaddt, lh_loadlive, purch_year, purch_month, purch_day)" +
                    "VALUES (0,'"+val0+"','"+val1+"',"+val2+",'"+val3+"','"+val4+"','"+val5+"',"+val6+","+val7+","+val8+",'"+val9+"','"+val10+"','"+val11+"','"+val12+"','"+val13+"','"+val14+"',"+val15+",'"+val16+"',"+val17+",SYSDATE,NULL,"+val18+","+val19+","+val20+")");
                         FileReader in = new FileReader(inputFile);
                         FileWriter out = new FileWriter(outputFile);
int c;
                         while ((c = in.read()) != -1)
                         { out.write((char)c); }
                         in.close();
                         out.close();
                         outFile.write(System.getProperty("line.separator"));
                         outFile.write("Number of records inserted - "+cnt);
                         outFile.write(System.getProperty("line.separator"));
                         outFile.write("Copied upload file to archive directory");
                         f.delete(); // delete the upload file
                         outFile.write(System.getProperty("line.separator"));
                         outFile.write(f+"/"+s[i]+" - Has been removed from upload directory");
                         buff.close();
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("Upload Complete...NO ERRORS");
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("*************************************************************");
                    outFile.write(System.getProperty("line.separator"));
                    //outFile.flush();
          //outFile.close();
                    conn.close();
                    else
                    { outFile.write("No files to process"); }
          catch(Exception e)
               { outFile.write(System.getProperty("line.separator"));
               outFile.write("ALERT....ALERT....ALERT");
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("Error Occurred in ReadSource.java - RIFIS Upload");
                    outFile.write(System.getProperty("line.separator"));
               outFile.write("My Error: " + e);
                    outFile.write(System.getProperty("line.separator"));
                    outFile.write("*************************************************************");
               outFile.flush();
          outFile.close();

Gave it a try but file c:\upload\DS121002.csv did not go away. Here is the location of my delete command:
st.executeUpdate("INSERT INTO LANDINGS_HOLD (lh_id, lh_batch, supplier_dr_id, supplier_unique_id, supplier_dealer_id, supplier_cf_id, supplier_vessel_id, unload_year, unload_month, unload_day, state_code, county_code, port_code, itis_code, market, grade, reported_quantity, unit_measure, dollars, lh_loaddt, lh_loadlive, purch_year, purch_month, purch_day)" +
                    "VALUES (0,'"+val0+"','"+val1+"',"+val2+",'"+val3+"','"+val4+"','"+val5+"',"+val6+","+val7+","+val8+",'"+val9+"','"+val10+"','"+val11+"','"+val12+"','"+val13+"','"+val14+"',"+val15+",'"+val16+"',"+val17+",SYSDATE,NULL,"+val18+","+val19+","+val20+")");
                         FileReader in = new FileReader(inputFile);
                         FileWriter out = new FileWriter(outputFile);
int c;
                         while ((c = in.read()) != -1)
                         { out.write((char)c); }
                         in.close();
                         out.close();
                         inputFile.delete();
                         outFile.write(System.getProperty("line.separator"));
............

Problems uploading a file

Hi all,
I'm using JDeveloper 11.1.1.1.1.0. I followed Steve Muench's uploading example (http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#85). The uploading works well with files undir 10k. But I get an error when I try to upload a file i.e. of size 22k. Both files are txt files. I also get the error when I use Steve's sample application. I've tried this on 2 different databases, XE 10g, and a 11g database. The error I get in the weblogic server is the following:
####<09-07-2009 17:26:30 CEST> <Error> <HTTP> <codd> <DefaultServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1247153190402> <BEA-101017> <[ServletContext@1749441[app:HealthResearchSupportSystem module:HealthResearchSupportSystem path:/HealthResearchSupportSystem spec-version:2.5 version:V2.0], request: weblogic.servlet.internal.ServletRequestImpl@56ff3d[
POST /HealthResearchSupportSystem/faces/uploadfile-flow/uploadFilesToProject?_adf.ctrl-state=p1bymyye6_37 HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
Referer: http://127.0.0.1:7103/HealthResearchSupportSystem/faces/adf.dialog-request?_adf.ctrl-state=p1bymyye6_17&_rtrnId=0
Accept-Language: en-US,da;q=0.5
Content-Type: multipart/form-data; boundary=---------------------------7d937a857053a
UA-CPU: x86
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.2; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)
Content-Length: 26512
Connection: Keep-Alive
Cache-Control: no-cache
Cookie: oracle.uix=0^^GMT+2:00; JSESSIONID=55zHKWLLhrG2dyWtRNKTfCzGQnv5wYJxBQd4w6LTPNqdyMtVPH3b!-1454567202
]] Root cause of ServletException.
oracle.jbo.DMLException: JBO-26041: Kunne ikke postere data til database under "Tilbagestilling til sikringspunkt": SQL-sætning "null".
     at oracle.jbo.server.DBTransactionImpl.rollbackToSavepoint(DBTransactionImpl.java:2988)
     at oracle.jbo.server.DBTransactionImpl.restoreTmpPostState(DBTransactionImpl.java:1772)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2954)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1991)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2233)
     at hrsusdatamodel.service.HRSuSAppModuleImpl.saveUploadedFile(HRSuSAppModuleImpl.java:1208)
     at hrsusui.backing.UploadFilesToProject.fileUploaded(UploadFilesToProject.java:56)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXEditableValue.broadcast(UIXEditableValue.java:214)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:444)
     at javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:701)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ProcessValidationsCallback.invokeContextCallback(LifecycleImpl.java:1178)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:291)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.sql.SQLException: Lukket forbindelse
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
I also traced the db-session and got the following in the trace file (only showing the end):
=====================
PARSING IN CURSOR #10 len=168 dep=1 uid=52 oct=47 lid=52 tim=1247153792975712 hv=337957580 ad='d2f665f0' sqlid='a6u3yjca29nqc'
declare
m_stmt varchar2(512);
begin
m_stmt:='delete from sdo_geor_ddl__table$$';
EXECUTE IMMEDIATE m_stmt;
EXCEPTION
WHEN OTHERS THEN
NULL;
end;
END OF STMT
PARSE #10:c=0,e=75,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,tim=1247153792975707
BINDS #10:
=====================
PARSING IN CURSOR #12 len=33 dep=2 uid=52 oct=7 lid=52 tim=1247153792976485 hv=1949913731 ad='d2f661a0' sqlid='3972rvxu3knn3'
delete from sdo_geor_ddl__table$$
END OF STMT
PARSE #12:c=0,e=576,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1247153792976480
BINDS #12:
EXEC #12:c=0,e=95,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=1,tim=1247153792976641
STAT #12 id=1 cnt=0 pid=0 pos=1 obj=0 op='DELETE SDO_GEOR_DDL__TABLE$$ (cr=0 pr=0 pw=0 time=0 us)'
STAT #12 id=2 cnt=0 pid=1 pos=1 obj=62986 op='TABLE ACCESS FULL SDO_GEOR_DDL__TABLE$$ (cr=0 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
EXEC #10:c=0,e=908,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,tim=1247153792976748
XCTEND rlbk=0, rd_only=1
WAIT #0: nam='SQL*Net break/reset to client' ela= 19 driver id=1952673792 break?=1 p3=0 obj#=86504 tim=1247153792976925
WAIT #0: nam='SQL*Net break/reset to client' ela= 43 driver id=1952673792 break?=0 p3=0 obj#=86504 tim=1247153792976992
Any ideas what could be causing this? I get this error both in the example application and in my application. I also get this error in both the 10g (XE) database and in the 11g enterprise database.
Thanks in advance.
Sturla Thor

Thanks for your reply jflack.
I forgot to say that I had set those parameters:
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_MEMORY</param-name>

<param-value>512000</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_MAX_DISK_SPACE</param-name>

<param-value>5120000</param-value>
</context-param>
<context-param>

<param-name>org.apache.myfaces.trinidad.UPLOAD_TEMP_DIR</param-name>

<param-value>/tmp/TrinidadUploads/</param-value>
</context-param>

<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
I also have checked if my upload directory has enough space.

Powershell: How do I upload files with metadata from a manifest file?

I am using the script from this blog to try to upload files into SharePoint, using a manifest file to specify the metadata associated with each file. Right now, the script works, but is not populating
the metadata from the manifest (xml) file. When I write the $metadataManifest variable out to the console, I get the contents of my xml file, so the code is reading the file when it should. However when it gets to the line in bold ($metadataManifest.Columns.Column),
it does not go into that block...it just skips on to checkin the file. Again the $metadataManifest variable shows all the content in my xml manifest file. Here is what the script looks like...
#Get web and document library objects
$web = Get-SPWeb "http://companySite"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "C:\PowerShellScripts\Manifest.xml"
$LocalPath = "C:\Upload\Test Upload\My Upload Directory\"
if ($ManifestFilePath)
$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
#Walk through manifest XML file and configure column values on the file
$metadataManifest.Columns.Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
And here is what the manifest file looks like...
<?xml version="1.0" encoding="utf-8"?>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Column1" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>9876</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data2</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More more Data</Value>
</Values>
</Column>
</Columns>
I can't figure out what am doing wrong...why my script is not iterating through the manifest file to upload the document along with the metadata. I would really appreciate any help. Thanks

Hi Spawn,
Name should not be a problem.. I will probably post you the entire code (I modified it to meet your goals for having multiple column xml nodes as well)
For the code snippet below:
a. In powershell all my changes will have ## prefixed comments
b. in XML I have changed one column name to "Name" to replicate your case and also added a parent node for making the xml well formed.
and the SharePoint output
Please see the code below
$web = Get-SPWeb "http://intranet/sites/test"
$Library = "My Library"
$docLibrary = $web.Lists[$Library]
$ManifestFilePath = "D:\Manifest.xml"
$LocalPath = "D:\UploadPath\"
if ($ManifestFilePath)
##read the xml file as an xml object
[xml]$metadataManifest = (Get-Content ($ManifestFilePath))
write-host "Manifest file: " $metadataManifest
else
write-host "Manifest file not specified for categorising uploaded documents"
#Check for the LibraryStartFolder parameter to specify a root folder
if ($PSBoundParameters.ContainsKey('LibraryStartFolder')) {
$folder = $web.GetFolder($docLibrary.Title + $LibraryStartFolder)
else
$folder = $docLibrary.RootFolder
#Attach to local folder and enumerate through all files
if($IncludeSubFolders) {
$files = Get-ChildItem $LocalPath -Recurse
else
$files = Get-ChildItem $LocalPath
$counter=0
$files | ForEach-Object {
#Check if the object is a folder - if so, create it in doc library
if ($_.PSIsContainer) {
if (($IncludeSubFolders) -and (!$FlattenStructure)) {
#Generate folder path for creation in SharePoint
#by looking at the parent folder on the local path
$spFolderPath = ($_.Parent.FullName.Replace($LocalPath,"")).Replace("\","/")
#Get the folder into which the new folder will be created
#by adding the folder path generated above, if one existed
if ($spFolderPath -eq "") {
$currentFolder = $web.GetFolder($folder.Url)
else
$currentFolder = $web.GetFolder($folder.Url + $spFolderPath)
#Check to see if subfolder already exists
#and create it if not
$testFolder = $currentFolder.SubFolders[$_.Name]
if ($testFolder -eq $null) {
write-host "`nAdding folder" $_.Name "to" $docLibrary.Title "in" $web.Title "..." -foregroundcolor Green
$newFolder = $currentFolder.SubFolders.Add($_.Name)
else
write-host "`nFolder" $_.Name "already exists in" $docLibrary.Title "and shall not be created" -foregroundcolor Red
else
#Generate file path for upload into SharePoint
if ($FlattenStructure) {
$spFilePath = ("/" + $_.Name)
else
$spFilePath = ($_.FullName.Replace($LocalPath,"")).Replace("\","/")
$spFullPath = $folder.Url + "/" + $spFilePath
#Check if the file exists and the overwrite option is selected before adding the file
if ((!$web.GetFile($spFullPath).Exists) -or ($Overwrite)) {
#Add file
write-host "`nCopying" $_.Name "to" $spFullPath.Replace("/" + $_.Name,"") "in" $web.Title "..." -foregroundcolor Green
$spFile = $folder.Files.Add($spFullPath, $_.OpenRead(), $true)
#$spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
$spItem = $spFile.Item
## ensure we pick the corresponding node in the columns xml (first file, first xml node, second file - second node likewise)
#Walk through manifest XML file and configure column values on the file
$metadataManifest.FileData.Columns[$counter].Column | ForEach-Object {
#Single value text columns
try
if (($_.Type -eq "Text") -or
($_.Type -eq "Choice") -or
($_.Type -eq "Boolean") -or
($_.Type -eq "Number") -or
($_.Type -eq "Currency")) {
$columnName = $_.Name
write-host "Setting value on column"$columnName "..." -foregroundcolor Blue
$_.Values.Value | ForEach-Object {
$spItem[$columnName] = $_
write-host "Value set to"$_
catch {}
#Multiple line text column
try
catch {}
#Multiple choice columns
try
catch {}
#Hyperlink columns
try
catch {}
#Single User column
try
catch {}
#Multiple User column
try
catch {}
#Single value Managed Metadata column
try
catch {}
#Multi value Managed Metadata column
try
catch {}
#Update document with new column values
$spItem.SystemUpdate($false)
##increment the counter to read the next xml node
$counter++
#Check in file to document library (if required)
#MinorCheckIn=0, MajorCheckIn=1, OverwriteCheckIn=2
if ($CheckIn) {
if ($spFile.CheckOutStatus -ne "None") {
$spFile.CheckIn("File copied from " + $filePath, 1)
write-host $spfile.Name"checked in"
#Approve file (if required)
if ($Approve) {
if ($spItem.ListItems.List.EnableModeration -eq $true) {
$spFile.Approve("File automatically approved after copying from " + $filePath)
if ($spItem["Approval Status"] -eq 0) { write-host $spfile.Name"approved" }
else
write-host "`nFile"$_.Name "already exists in" $spFullPath.Replace("/" + $_.Name,"") "and shall not be uploaded" -foregroundcolor Red
$web.Dispose()
and the xml file
<?xml version="1.0" encoding="utf-8"?>
<FileData>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>First File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Second File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Third File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fourth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
<Columns>
<Column Name="Name" Type="Text">
<Values>
<Value>Fifth File</Value>
</Values>
</Column>
<Column Name="Column2" Type="Text">
<Values>
<Value>12585</Value>
</Values>
</Column>
<Column name="Column3" type="Text">
<Values>
<Value>Some Data</Value>
</Values>
</Column>
<Column name="Column4" type="Text">
<Values>
<Value>More Data</Value>
</Values>
</Column>
</Columns>
</FileData>
Thanks and Regards,
Partha
AvePoint

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

Upload form problems on Mac web server with PHP

First time using a mac web server and I'm having a heck of a time getting a simple upload form to work in this environment. The errors I'm receiving are:
Warning: move_uploaded_file(/Library/WebServer/Documents/mydirectory/content/mwm/) [function.move-uploaded-file]: failed to open stream: Is a directory in /Library/WebServer/Documents/mydirectory/umin/uploadContent.php on line 66
Warning: move_uploaded_file() [function.move-uploaded-file]: Unable to move '/private/var/tmp/php1pRrx5' to '/Library/WebServer/Documents/mydirectory/content/mwm/' in /Library/WebServer/Documents/mydirectory/umin/uploadContent.php on line 66
Usually this problem is resolved by changing permissions on the directory receiving the upload. I've already done that, and set the permissions to 777, though the problem still persists.
I'm basically defining my upload directory, and then moving the file thereafter:
define('UPLOAD_DIR', '/Library/WebServer/Documents/mydirectory/content/'. $category . '/');
move_uploaded_file($_FILES['uploadedFile']['tmp_name'], UPLOAD_DIR);
The rest of the script, without the move execution, works properly. Any help would be appreciated.
Message was edited by: LoopyChicken

BAH!
I had forgotten to add the name of the file to the move command:
Fix here:
move_uploaded_file($_FILES['uploadedFile']['tmp_name'], UPLOAD_DIR.$file);
Thanks.

Problem in upload file using oreilly classes

Hi
I stucked on a problem......
I want to upload file from html page....On this page I want only a upload button so that when I click on this button file will upload from my client m/c to server m/c....
I have code n all but browse button on html page....now I want to remove this browse button n want to give the file path somewhere in the code itself........so that on html page there will only the uplod button and by click on this button file will upload from client to server.......server path already there in code.....Please do the needful
Abhishek
I m putting the code here:-
FileUpload.java
upload-FileUpload.java
NOTE: This file is a generated file.
Do not modify it by hand!
package upload;
//custom imports for FileUpload
//add your custom import statements here
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import com.oreilly.servlet.MultipartRequest;
import java.util.*;
public class FileUpload extends javax.servlet.http.HttpServlet
     protected boolean create() throws java.lang.Exception
          return true;
     public FileUpload()
     {   // Constructor.
     private void unhandledEvent( String listenerName, String methodName, java.lang.Object event )
     * destroy Method
     public void destroy()
          super.destroy();
          // TODO: implement
     * doGet Method
     protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          System.out.println("abhishek");
          response.setContentType( "text/html" );
          PrintWriter out = response.getWriter();
          out.println("<HTML>");
          out.println("<HEAD><TITLE>FileUpload</TITLE></HEAD>");
          out.println("<BODY>");
          out.println("<H1>FileUpload</H1>");
          out.println("Hello World!");
          out.println("<P>Default Implementation From PowerJ</P>");
          out.println("</BODY></HTML>");
          // TODO: implement
     * doPost Method
     protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          PrintWriter out = response.getWriter();
          try{
               response.setContentType("text/html");
               out.println("<HTML>");
               out.println("<head><Title>Decoded Uploaded File</title><head>");
               out.println("<body>");
               out.println("<H1>UploadFile</h1>");
               // path must be absolute to upload dir
               // This is the decoder class that extracts the parameters and transfer file
               // request argument = Http input stream
               // c:\\temp\\upload = directory to save file
               // 15*1024*1024 = 15mb max size file
               MultipartRequest multi = new MultipartRequest(request, "c:\\temp\\upload",15*1024*1024);
               // Lists form parameters
               out.println("Params:");
               Enumeration params = multi.getParameterNames();
               out.println("<pre>");
               while (params.hasMoreElements()) {
                    String name = (String)params.nextElement();
                    String value = multi.getParameter(name);
                    out.println(name + " = " + value);
               out.println("</pre>");
               // Show details of uploaded file
               out.println("Files:");
               Enumeration files = multi.getFileNames();
               out.println("<pre>");
               while (files.hasMoreElements()) {
                    String name = (String)files.nextElement();
                    String filename = multi.getFilesystemName(name);
                    String type = multi.getContentType(name);
                    File f = multi.getFile(name);
                    out.println("name: " + name);
                    out.println("filename: " + filename);
                    out.println("type: " + type);
                    if (f != null) {
                         out.println("f.toString(): " + f.toString());
                         out.println("f.getName(): " + f.getName());
                         out.println("f.exists(): " + f.exists());
                         out.println("f.length(): " + f.length());
                         out.println();
                    out.println("</pre>");
          }catch (Exception e){
               out.println("<pre>");
               e.printStackTrace(out);
               out.println("</pre>");
          out.println("</body></html>");
     * init Method
     public void init(ServletConfig config) throws ServletException
          super.init(config);
          // TODO: implement
     * data members
//     add your data members here
UploadFile.html
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta name="GENERATOR" content="Microsoft FrontPage 4.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<title>File Upload using EAS</title>
</head>
<body>
<form method="POST" enctype="multipart/form-data" action="upload/FileUpload">
<p><b>File Upload using EAS </b></p>
<p>Select file to send: <input type="file" name="name" size="30"></p>
<p>Your Name: <input type="input" name="yourname" size="20"> </p>
<p align="left"><input type="submit" value="Send File" name="submit"></p>
</form>
</body>
</html>
You can download the oreilly files from :- (same code is also here)
http://www.sybase.com/detail?id=1011664

where I should write down the file path(The file in client pc....e.g. C:\Documents and Settings\abhishek.jain\Desktop\Daily Order Manual.pdf ) in code........I m getting stuck

Preset upload-directory

Similar Messages

Maybe you are looking for