Presets for cropping in CC

I've installed CC and wanted to make presets for cropping. Like 20 by 30 300PPI and more sizes.
But when I want to choose one of them, there only appears one size for all.
How can I make it work? Somebody can help me please?
Thanks, Judith

Maybe I have mad it too quickly after each other.
But when I choose one of the presets I have made. Then you see 19, bij 12,7 by each of them. Just like the second screenshot.
Op 22 apr. 2015, om 08:33 heeft c.pfaffenbichler <[email protected]> het volgende geschreven:
presets for cropping in CC
created by c.pfaffenbichler <https://forums.adobe.com/people/c.pfaffenbichler> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7462836#7462836>
How exactly did you proceed when you created the Crop Presets?
What exactly happens?
Could you please post screenshots to illustrate the issue?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7462836#7462836 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7462836#7462836
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Similar Messages

More presets for canvas sizes(dimensions)

Example:Android wallpaper,Windows Wallpaper,Facebook Timeline...etc.It would be alot easier than searching the internet and hoping you got it right.

Maybe I have mad it too quickly after each other.
But when I choose one of the presets I have made. Then you see 19, bij 12,7 by each of them. Just like the second screenshot.
Op 22 apr. 2015, om 08:33 heeft c.pfaffenbichler <[email protected]> het volgende geschreven:
presets for cropping in CC
created by c.pfaffenbichler <https://forums.adobe.com/people/c.pfaffenbichler> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7462836#7462836>
How exactly did you proceed when you created the Crop Presets?
What exactly happens?
Could you please post screenshots to illustrate the issue?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7462836#7462836 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7462836#7462836
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Presets for Plugs like Line6 ??

Hi!
Maybe some of you know, that on the Line6 Page you can search for sounds and load the found preset to your Line6 Product. For example I like a Johnny Cash song, I tip the titel in and wuup - the sound is there and it realy is like the original.
Now I wonder, if there is something similar for the synth and plugs for Logics MainStage. If I would like to have a keybaord sound like the Artist "Moby" or a hammond sond like a "The doors" if there is a page, where people add there presets, that listen like the original. Thanks a lot Martin

Maybe I have mad it too quickly after each other.
But when I choose one of the presets I have made. Then you see 19, bij 12,7 by each of them. Just like the second screenshot.
Op 22 apr. 2015, om 08:33 heeft c.pfaffenbichler <[email protected]> het volgende geschreven:
presets for cropping in CC
created by c.pfaffenbichler <https://forums.adobe.com/people/c.pfaffenbichler> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7462836#7462836>
How exactly did you proceed when you created the Crop Presets?
What exactly happens?
Could you please post screenshots to illustrate the issue?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7462836#7462836 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7462836#7462836
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 94>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

How to create a preset for computer output of 1024x768?

I just upgraded from Premiere Elements 1.0 (yes, 1! :) ) to PE7. I record user group meetings for my local software developers group. We have screen capture at 1024x768 pixels and audio.
In PE1 I had no trouble bringing this footage in, editing it and exporting it as 1024x768 for viewing online by the members.
However, I can't seem to find anyway to create a project preset for 1024x768. It seems I can only create SD, HD and similar.
When attempting to create a custom preset 90% of the values are pre-filled with settings and I can't change them. I see textboxes for the height and width but I can't change them.
Is this a limitation of PE7? Why in the world can I not create a video any size I want? Without this ability the upgrade is almost useless to me.
Please let me know because I feel like I must just be missing something.
Thanks!
Matt

Hey Steve,
Thanks for the reply.
I did see the 720p preset and this does produce a nice image. The SD preset made the output look muddy and the screen text was unreadable.
That being said, when importing my media into a project on the 720p preset I get the black letterbox bars on the side.
I did render a 10 second test area and changed the output size to 1024x768. I was afraid it would squash the entire video, but much to my surprise it just cropped it. So, while I have to work with the letterboxing I can output an actual 1024x768 video. I was also having a little trouble because I was using File - Export Movie to, well, export my movie. When I tried the Share task, set it to PC and changed the settings this was much easier and produced a much better result.
Thanks for the help!
FYI, I use PE7 to export it as a wmv. I'm playing with Expression Encoder to then encoded this with VC-1 for Silverlight clients.

User presets for copy/paste function.

User presets for copy/paste function?
During an edit session, I am constantly switching to, and from copying: crop (only), and copying everything except "local adjustments" and "basic tone". I use a few other combinations as well. Switching between these involve a lot of tedious (& error prone) checking and unchecking of boxes. A preset option of some sort would help here.
What I do is edit one photo (in a string of similar photos), then copy it. Then select similar photos and auto sync them with the paste command, In an action sequence, the crop often needs to be done separate. Also the lens profile & calibration needs to be pasted separate if I happened to be switching between two camera/lenses.

Hi Per,
The below article will be helpful
Copy And Paste Data Between Excel Sheets Does Not Work When Smart View Add-In Enabled (Doc ID 1313584.1)
Thank you,
Charles Babu J

HD Preset sees cropping or margins on HDready TVs.

Premiere CS3
I am desperate to resolve this apparent simple task. I need to know, why does Premiers presets not fit HDready TV's ?
See the results from three different TV’s further below.
Just what should I make the width and height of a project (and what pixel aspect ratio ?) to have videos played on PAL dvd players fit a HD ready screen ? I need to put stills into the video. What size and pixel aspect ratio should they be made ?
The advice I followed sees margins and cropping. What other settings should I be choosing in Photoshop and then in Premiere and in TMPGenc ?
I am using Pshop CS2 WinXP, I have an LCD monitor. Client has LCD HDready TV PAL. (Native res 1533 x 768px.) the standard dvd video is to also play on friends LCD TVs. (they don’t have blueray players), all are dvd players with scart. People are buying LCD but keeping existing dvd players and thus using scart, picture quality is less than my Wega !
Why don’t the suggested presets from another thread create videos that fit HDready screens ?
I have need of making stills or video fit the screen of HD Ready TV’s (dont we all ?? !!!) and I am following advice that said use either 720x576 or 1280 x 720 or 1920x 1080 and ignore the screens default resolution. The 1920x1080 is the size of full HD TV’s and the 720x576 is not 16:9 ratio so probably intended for non HD Ready TV’s though I tried it anyway, picture quality on HDready was poor and it still saw cropping so it must be the 1280x720 then for the HDready.
To test this out, I created a chart of 1280 x 720pixels Square pixels in photoshop, saving as tiff.
It has a square grid of black lines on a white background (20 squares wide - each is thus 64pixels) and circles at left middle and right. At the sides are 5 pixel increment rulers heading into the chart with 0 at picture edge.
We want our stills or video to fit the HD Ready screen without distortion.
Thus the goal is to get the test image to fit the screen and see all edges as 0.
I went New Project in Premiere and chose the suggested 1280 x 720 size 25fps which exists as a preset.
Imported the tiff into the timeline. Made a video and authored it in TMPGencAuthoringWorks. It saw it as 720x576 and no options existed to make it otherwise. I chose Progressive.
Playing it on DVD players connected to LCD TVs we get anything but a fit to screen ! Why ?
Note they all are using scart, both shops and private TV’s. Would a HDMI enabled dvd player connected via hdmi see a fit with 0 at all four screen edges and perfect grid and circles, and no ghosting on the verticals, and the 1pixel zebra chart visible ?
I also noticed that text created in premiere was of better quality than Photoshops text in the tiffs, which on the Panasonic had jpg type artefacts around it, but not on the Wega CRT. Why ?
Panasonic HD Ready 32inch scart DVD to TV.
Auto     0 on all four sides so picture all in but with Black margins 3inch sides and 2 inch top/bottom.
16:9     0 on all four sides so picture all in but with Black margins 3inch sides and 2 inch top/bottom.
Zoom 1    0 and 0 left and right, 25 top and 20 bott, 4 inch wide black margins at sides.
Zoom 2    0 and 0 left and right, 25 top and 20 bottom so some cropping, circles a little stretched north/south
Zoom 3   0 and 0 left and right, 100 top and 100 bottom so 200 pixels lost in top/bott crop, circles heavily stretched north/south
14:9   0 all four sides with 5inch black side margins and 1inch black top/bott margins, circle heavily stretched north/south
4:3 though not an obvious choice for filling a 16:9 screen, gave 0 all round and 8inch black left/right and 2inch black top/bott.
Best then was Zoom 2 but 40 pixels lost north/south.
All vertical lines had ghosted lines either side, horiz lines ok.
LG (LH2000) 42inch LCD scart dvd to TV.
16:9   0 all four sides with black margins. Circles slightly stretched north/south
Full Wide   0 all fours sides with 3.5inch margins left/right and black margins top/bott.
Zoom   0 at left, right and bott but 20 at top. Black margins at left, right and bott but not at top. Most odd ! Circle stretched north/south
Original   0 all four sides and black margins 3.5 inch sides and 1.5 inch top/bott with Circles slightly stretched north/south.
Again All vertical lines had ghosted lines either side, horiz lines ok.
Samsung 32inch LCD scart dvd to TV.
Margins measured also using the pixel ruler of the chart, though its obvious its been compressed, else e.g. the 1024px margins of 4:3 take up almost all the screen width which they don’t in fact.
16:9   0 all four sides with black margins 202px wide at sides and 197px tall at top/bott. Circles distorted east/west.
Zoom   0 all four sides with black margins 202px wide sides and 90px tall top/bott. Circles distorted north/south
4:3   0 all four sides and black margins 512 pixels wide sides (6.25inches) and 240 pixels tall top/bott (3.25inch)
Autowide    0 all four sides with black margins 202px wide sides and 250px tall (3.25inch) top/bott. Circles distorted east/west.
Again All vertical lines had ghosted lines either side, horiz lines ok.
A second chart featured zebra crossings (alternate black/white lines) vert and horiz orientated of sizes 1,2 3 and 4 pixel line weights. All TVs were able to show the 3 pixel sets, in that the 1 and 2 were blurred and one could see the 3 was alternate black/white, not pin sharp though but somewhat woolly !
Playing the 720x576 Sq Pixel Interlaced chart :-
Sony Wega digital CRT 42inch: (scart dvd to TV):-
Smart   15left, 5 right, 54 top and 58 bottom with circles slight stretch middle east/west and more stretched for the outer ones. No Margins
14:9   20 left 0 right, 60 top and bottom. Black margins at sides of 72px width left and 55px width right. Circles ok.
Zoom   20 left, 14 right, 80 top and 85 bottom, No margins. circle ok middle and some stretch east/west for outer two.
Wide   20 left, 13 right, 15 top and 24 bottom No Margins with all three circles stretched east/west.
4:3    20 left, 0 right, 20 top and 25 bottom. Black margins at sides 128px width. Circles and grid almost perfect. Crazy though to be losing one side of image.
No ghosting of vert lines.
Panasonic LCD 32inch (same as in earlier test above..clients TV)
Auto 0 sides and 30top, 15 bottom, circle distorted east/west. No black margins
16:9   0 sides and 20 top, 15 bottom, circle distorted east/west. No black margins
Zoom 1   0 sides 90 top, 85 bott no black margins, Circle OK
Zoom 2   90 sides and 90 top, 85 bottom. Circle distorted east/west. No black margins
Zoom 3   90 sides and 16 top and bottom. Circle slight distort north/south, quality poor.
14:9   0 sides and 60 top, 55 bottom. Circle ok. Black margins sides (50pixel wide)
4:3   0 sides and 20 top, 15 bott. Circle ok. Black margins sides 120px width (3inch)
16:9 probably best but with cropping top and bott and distorted circles east/west so nothing here of use.
Vert lines ghosted either side
Nothing of any use.
Envirographics

Hi, Thanks for the advice.
How do you wish to show your project on an HDTV?.
Client has dvd player (not bluray capable) via scart and hopefully soon a hdmi lead.
Currently tried 1280 x 720 square pixel images created in photoshop (hence sq pixels) to suit the input preset of PAL 1280 x 720 25fps Square Pixel and going File>Export>Adobe Media Encoder and choosing MPEG2-DVD and PAL Progressive Widescreen High Quality which yields 720 x 576. This seemed suitable for a non HD playing device. It looked good on screen in TMPGencAuthoringWorks. Am I right in saying people buying LCD HDready TV's need to get a new dvd player capable of HD so as to make the most of the image quality of their TV ? Most seem to buy LCD and plumb them into their existing dvd players !
As the dvd player is not capable of bluray output, choosing this seemed logical BUT trying out all screen aspect settings on the Panasonic LCD HDready TV sees the following cropping of our 1280x720 test image with grid and circles, the cropping we got is simply unacceptable. (192 left /right means 192 on each side totalling 384)
On a plus note, quality improved, now seeing horiz black/white lines 1 pixel line weight, vert ones were a little woolly though. 2px test lines were ok. Thats an improvement over only 3 beijg best. Finding the Adobe Media Encoder has seen some benefit !
Auto 55 left /right ( that’s 8.6% lossage) and 25 top and 20 bott (6.25% lossage), Circles OK
16:9 ditto
Zoom 1 55 left /right (8.6%) and 105 top/bott (29% lossage) Circles stretched vert
Zoom 2    192 left /right (30%) and 100 top/bott (27%) Circles ok
Zoom 3   192 left/right (30%) and 168 top/bott (47%) ..a disaster !
14:9   55 left/right with black margins each 96px , 75top and 65 bott (19%) Circles stretched vert.
4:3   55 left/right with black margins each 192, 25top and 20 bott (6.25%) Circles stretched vert.
Auto and 16:9 best but we ned to see 0 on all four sides else we are losing people out of the picture ! ...or should we add black margins to it ! ?
Any answers to the following gratefully received.
What should I choose for PAL dvd video to HDreadyTV. ?
1) Pixel width and height of still (tiff) ?
2) Pixel aspect ratio of still (tiff) ?
3) Preset for input source or custom setting and what to choose ?
4) Adobe Media Encoder output settings:-
     a) MPEG2 or MPEG2-DVD
     b) PAL option ..which one to pick with regards pixel width/height, fps, interlacing or progressive, quality effect on pixels and our desired goal ?
     c) or custom output and what ?
Envirographics.

Unable To Use DVDSP4 Presets for HD-DVD in the H.264 Format

I recently prepared a 23 minute slide show using Fotomagico from high resolution Hasselblad slides scanned in at 1200 dpi. Within Fotomagico I rendered the Fotomagico slide show to Apple ProRes 422 HQ, took it into Final Cut Pro 6.03 and added an intro and closing section. I then sent this to Compressor and selected the 30 minute HD-DVD preset which uses mpeg2. All went fine with the encoding to mpeg2 and I got a successful build and format out of DVDSP4 after importing the resulting .m2v file into DVDSP4. However, while the disk plays back fine in my Mac Pro it plays back with stuttering (audio and video) on my Toshiba HD-A2 HD-DVD player. I used a Verbatim Datalife DVD+R, but several other discs from other manufactuers including a DVD-R disc showed the same problem.
Please note that I have the latest firmware on my Toshiba HD-A2 and I have successfully burned RL HD-DVD discs using my PC and Windows software (Ulead's DVD Movie Factory 6+) which play fine without stuttering on my HD-A2.
I then decided to send the project to Compressor and use the 60 minute HD-DVD preset that encodes to H.264. Once again Compressor successfully executed the encode of my 23 minute slide show and it plays fine in QuickTime or MPEG StreamClip. However, every time I try and import this .mov file encoded in H.264 using the Compressor preset for HD-DVD into DVDSP4, DVDSP4 brings it in to the assets folder, but after a couple of seconds DVDSP4 crashes. Using console I get a message that DVDSP4 quit unexpectedly due to a "segmentation fault".
I also tried to take the ProRes Fotomagic project in Final Cut Pro 6.02 and send it out with Quicktime Conversion using the H.264 codec. Again I have a file that plays fine in QT, but when I try and import this .mov file into DVDSP4, I get the message "imcompatible format".
In summary, I am completely frustrated after many many hours of work at trying to prepare an HD-DVD on red laser of my slide show in DVDSP4. I cannot figure out what I am doing wrong, and I would be most appreciative of any suggestions anyone may have.
Thanks in advance.
Tom

Am I the only person who has ever tried to use the Presets in Compressor 3 for encoding HD-DVD disks? I would like to use these presets for burning HD-DVD's to standard red laser media as I have done on my PC. With the mpeg2 Preset I can get nothing but stuttering video when played back on my Toshiba HD-A2 and when I use Compressor 3 to encode with either of the H264 presets, the resulting .mov file causes DVDSP4 to crash when I import the file. Has no one else experienced this? Does anyone have any thoughts on addressing these issues other than to go back to working on my PC?
Tom

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

Is there a way to create a preset for drop shadows?

I'm setting up a template for a new brochure that will need drop shadows on every product that is being placed. Is there a way to save a preset for a drop shadow so I need not have to recreate the shadow every time? Also this is being distributed to many people to work on and effects presets would be hugely beneficial-just not sure if that is possible? Although it is Indesign, and they are usually on the up and up for this kind of thing.
Thanks!
FF

The Eyedropper Tool is a quick way of applying the same drop shadow to many objects
But as peter says object styles is a much simplier way.

CS3 How to choose a Codec/extension wrapper and Preset for a project

Goal
To create fanvideos from commercial DVDs for personal fair use.
Potential to use to promote a series in a social media campaign with permission of owner.
Tools on Hand
Three seasons worth of the series ripped from commercial DVD --> .VOB format in TS Folders on my 2008 10.5.8 Mac using MacTheRipper
FFMpegx CODEC pack.
CS3 Premierie Pro with Mac updates that were posted on the Adobe site.
So far I've been able to
I managed to use ffmpegx to convert my .vobs into .mp4s, which I then renamed as .movs to get Premiere to recognize it. I managed to sync my audio with the mp4 encoder (may have been a H264 but not sure by changinge the frame-rate from ntsc film to ntsc.
Problems I've encountered
I had admittedly been experimenting with different codecs and .exts, trying to find optimum quality:size:premiere/iDVD compability, so I had a variety of source footage in my project. For some, I had to readjust the pixel aspect ratio. But when i rendered/exported the final product...everything was squished and incorrect. I had sound syncing issues for some of my trials, too. Before I was trying to make things compatable with iDVD. I no longer care about this and have no intention of burning anything with this project.
I saw things on the internet about using Encore's library of codecs, but couldn't find anything .dll on my computer. I also have no idea how to use any of hte CS3 support software (bridge, extension manager, after affects)
Current steps I'd like to take
I'm starting over and converting my .vob files into something Adobe will recognize (a simple file name change didn't work in this instance). I've read the different file types that Adobe PPro recognizes, but it's come to my attention that it prefers some file types to others. Which extension wrappers are the least likely to cause headaches when trying to edit in Pro?
Out of those possible codecs and extension wrappers that are compatible, which are the best for fitting a lot of quality into a small filesize? I heard good things about H264, but I don't know if the patch I dl'd will be enough to make it Adobe PrePro compatible (and I know there are a few different kinds of h264. the only one i had any success with at all put it an mp4 mpeg container, but didn't end up being anything of a filesize savings compared to the other h264, which ended up being useless). I have about 60 .vobs that are 2 GB big, and don't have an external hard drive yet, so this is a consideration.
How do I choose a preset for my new project? These DVDs were released over the course of 3 years, and they don't all have the same specs in their native format (when I grab the info from DVD player, it's different). Will I have better luck using different seasons if I convert them from .vobs to identical target file types? I guess the better question is, when using 3 different types of files that are wrapped into .vobs, am I better off customizing the target file to match the file information DVD Player gives me for each different season....or trying to find specs that serve all three seasons best and have more uniform files imported into Premiere? Eitherway, how do I know how to pick a Preset? I try keeping a 16:9 or 16:9 DVD in my target files, but does that make it a widescreen project to start? Once I start the project, is it too late to change these settings?
Thank you for helping a newbie. I tried looking around for answers to each problem as I came across them, but eventually I got overwhelmed and threw my hands up, deleting everything. I'm ready to ask for help and have a little patience.
*It's important for me to use free or very affordable 3rd party software, as I am currently unemployed.

You MAY want to think about a product that will read the output from your DVD player and convert to DV AVI
Matt with Grass Valley Canopus in their tech support department stated that the model
110 will suffice for most hobbyist. If a person has a lot of tapes that were played
often the tape stretches and the magnetic coding diminishes. If your goal is to encode
tapes in good shape buy the 110, if you will be encoding old tapes of poor quality buy
the model 300
Both the 110 and 300 are two way devices so you may output back to tape... if you don't
need that, look at the model 55
http://www.grassvalley.com/products/advc55 One Way Only to Computer
http://www.grassvalley.com/products/advc110 for good tapes, or
http://www.grassvalley.com/products/advc300 better with OLD tapes

How to set default preset for Save for Web

Following the demise of my laptop, I have installed PSE8 (Windows) on my new one.
On my old machine, the default preset for Save for Web was JPEG High
On the new installation, the default is GIF and you have to manually scroll through the presets every time to apply the JPEG High preset.
Is it possible to change the default preset. If so, how.
Thank you

That faq from John R Ellis has not been updated, but may be useful:
Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)

"Use presets for responsive layout" not working in Chrome

I am building a responsive website. I am going to have parts of the website animated using Edge Animate. I will make the animation and then insert it into a div in the responsive website I am building.
The Adobe Edge animation has a width of 100%, so that it resizes according to the area that it occupies the full width of the div no matter how wide that div may be in px.
It is all working fine, but:
I have an image in the Edge animation that is center aligned. It must stay center aligned no matter what width the animation ends up being.
Within Adobe Edge, in Properties, in Position and Size, there is a option where, if you hover your mouse cursor over the top right button a tool tip says "Use presets for responsive layout"
With the image on the stage selected, I can click on the "Use presets for responsive layout" button and then choose "Centre background Image".
It works perfectly in all browsers accept Chrome (even IE is playing ball this time). In chrome the width of the image stretches out as the div stretches out..
The "Centre background Image" setting says that it won't scale the image. But in Chrome it does.
What can I do to "tell" Edge Animate to center the image but not scale it in the Chrome browser?
I can see that in the image properties it is set to Background image x axis and y axis 50%. And the width is set to pixels. But in Chrome, the image stretches.
If you go to http://www.brainstormadvertising.co.uk/demo/services.html you will see what I mean. The circle image is centering BUT stretching in chrome browsers while centering nicely and NOT stretching in other browsers.

Thank you for your reply Josh. But the point of this setting in Edge Animate is that you can set it up that the background image is center aligned and does not scale. Yet it produces code that gives the width as 21.72%.
A little further along I see background-size: 48px; . This is correct.
So all the browers are reading background-size: 48px; as the scale measurement but Chrome is reading the width only, not the background-width. So this "Use presets for responsive layout" works in all browsers except chrome.
I don't know how to change that code after the artwork has been published. I can see the code using Firebug, but where do I change it in my code on my computer before uploading to the server?
I have reported this bug to Adobe.
Please see the attachment. You can see where all the settings are made and where I am getting a problem.

How do I fix my animation presets for text that won't load? It seems to get locked in loop and I am forced close Adobe Bridge.

How do I fix my animation presets for text that won't load? It seems to get locked in a loop when I click on one and I am forced to "fore close" Adobe bridge which After Effects uses to locate the presets. Any help would be appreciated. Thanks.

What is your exact workflow? The proper procedure is to select your text layer in AE, find the text preset you want to use, then drag or double click that preset to apply it to your project.
It also helps if we know your version of AE and OS down to the decimal point. You didn't give us much to go on.

Is there a plug-in for cropping movies?

Is there a plug-in for cropping movies? I asked this question a few months ago, and someone suggested a plug-in that turns everything outside a cropping window into a background color. I would like to be able to do true cropping. I hope it's not necessary to extract all the frames, crop them one at a time, and then put them back together.

...I would like to be able to do true
cropping...
that does mean, you want to chop off some parts, BUT
you need to blow the rest to avoid the mentioned
borders...
that's called a crop&zoom, you get it here
http://imovieplugins.com/ for 2.5$ (search for
zoom)
I quote the website:
this plug cannot improve the quality of the
footage. if you zoom part of the picture, very soon
you will see a ‘pixellation’ effect, i.e. the picture
becomes blocky. the plug does everything it can to
interpolate between pixels,...
Yep, that's exactly what I want to do. Of course, I realize that it will appear pixellated if it's also zoomed. My main goal, however, is to eliminate the unwanted part of the movie so that I can fit it on my web site. Thanks!

How to download presets for adobe softwares in CC

How to download presets for adobe softwares in CC

Arunesh please see http://forums.adobe.com/index.jspa?promoid=JZEFM for a list of the available forums. I would recommend posting to the forum specific for the software title you are attempting to load presets.

Presets for cropping in CC

Similar Messages

Maybe you are looking for