Preview column and appleworks documents

My two Macs running Tiger 10.4.3 do not show a preview of Appleworks documents in the preview column of the finder.
My Mac running Panther does.
What are possible reasons that the Tiger Macs do not show the preview?
I do note that the Tiger Macs do successfully show previews of pdf files and jpegs.
thanks
iMac 450 dv, Powerbook G4 Mac OS X (10.4.3)

AFAIK the AppleWorks Finder preview is a plug-in written specifically for the Finder. That plug-in architecture was never really used much to the best of my knowledge, and over time the Finder has perhaps transitioned to a newer method of previewing content. The AppleWorks oversight may merely reflect the overall deprecated nature of this app at Apple. Consider that a tag line for iWork is "Building a successor to AppleWorks." So, eh :shrug:
PowerMac G5 (June 2004) 2x1.8GHz 1.25GB, PowerBook G4 (12-inch DVI) 1x1GHz 768MB Mac OS X (10.4.3)

Similar Messages

Finder and Appleworks documents

I have a friend who had a great many files in Appleworks. We were able to install Appleworks on her imac with Leopard, and she has been gradually moving them into .doc format (copying the Appleworks file contents, pasting it into a clean Neooffice doc and then saving the Neoffice doc.) She saves them into the same folder that the Appleworks docs lived (with no extension).
What is weird is that the Appleworks documents appear to come and go almost at random. One time you can't see them in the folder where you know they were, the next time you CAN. You can find them with Spotlight. I've done the disk cleanup and reset permissions, etc, run Onyx on it. Still happens after multiple restarts and on multiple documents. It SEEMS to be just limited to Appleworks documents, which seem to appear and disappear.
We can live with this - she's about done with her copying at this point - but it IS a behavior I've not seen before. Has anyone else seen this? Does it portend something more ominous than just an old program not being properly recognized?

http://discussions.info.apple.com/webx?[email protected]@.688fe733
This contains the following topics....
AppleWorks slow? Spinning ball appears?
These symptoms are usually caused by a full Recent Items folder, or less commonly, a full Auto Save folder. Follow these steps to empty the Recent Items folder or Auto Save folder.
1. Quit AppleWorks.
2. Delete the contents of AutoSave and Recent Items (Folders)
~/Documents/AppleWorks User Data/Starting Points/Recent Items
~/Documents/AppleWorks User Data/AutoSave
3. I t was also reported that deleting the following also solved a problem...
~/Library/Preferences/.GlobalPreferences.plist
4. If you do not use either the Recent Items or Auto Save (aka Auto Recovery) features of AppleWorks you can disable them from the AppleWorks Preferences.
THEN... if AppleWorks still will not launch:
1. Open your Applications folder, and then the AppleWorks folder. You should see the AppleWorks icon and several "supporting folders" (AppleWorks Essentials, AppleWorks Extras, Starting Points, etc.)
2. Control + Click on the AppleWorks icon and select "Show Package Contents"
3. Double-click to open the Contents folder. Here's where the problem is.
4 You should see 3 folders and files. The folders should be named MacOS, MacOSClassic and Resources. In all the incidents I've seen, the "MacOS" folder has somehow been renamed with some long obscure cache-like number. Rename this folder MacOS (be sure to type it exactly like this, no space)
5. Close the Contents folder and Package folder and try to launch Appleworks.
6. Smile!
If this does not work for you, (there was one incident that the above fix did not for me), highlight the MacOS folder and duplicate it. Toss the original and rename the copy to Mac OS. For some reason the copy worked.
george

OS X Lion finder crash on show preview column mode

Hi.
I need help for the finder problem.
I have been used osx series finder in column view.
when i select a file such as a.txt or a.php etc... and it shows preview column and then
the finder crashs and restart itself.
it's really annoying me.
I think it has something wrong wirh file extension.
can anyone help me with this please.
thank you.

Hi.
I found a solution for this problem but it is not that great solution.
I guess The problem is relate with totalfinder. because i reinstall(clean install) osx lion, the problem had been fixed but after that i installed old version of "totalfinder". it happens again....
now i reinstall the lion again and install the newest version of total finder. it's fine now,
so...
the solution is reinstal(clean) the osx lion.
im pretty sure it will be fine.
good luck!

Image content type in Site Asset Image library: The Preview and Thumbnail Preview columns do not display the picture of the item.

I have two different Site Asset libraries. The Site Asset Picture library has items of
content type picture. The Site Asset Image Library has items of
content type image.
1) I do not quite understand the different between a picture content type versus an image content type.
2) the thumbnail and preview columns do not display the image in the Site Asset
Image Library. (the image does display in the thumbnail column of the Site Asset Picture library.) I expected the image to display in the Site Asset Image Library the same as it does in the Site Asset Picture library.
Why doesn't it?
Betty
Betty Stolwyk

I have subsequently found out that our "Site Asset Images" library is a Document Library to which someone must have replaced the Document content type with an Image content type. I also found out that picture previews/thumbnails cannot be displayed
in Document libraries. So the problem was the library type, not the content type.
So I simply created a new Picture Library (whose content type = picture) and copied the files into that and the thumbnails displayed just fine!
I bet what led to this is the default "Site Assets" library that is created for a new Team site. It is just a document library but sounds very similar to the "Assets" library. I can imagine someone thinking the "Site Assets" library was a standard
container for images, and simply changed the name to better identify the content!
As far as 'image' vs 'picture' content types, I noticed that a new Picture Library contains a content type of 'picture', but an Asset Library contains a content type of 'image' (as well as audio and video). Although the 'image' content type has a few
more fields than the 'picture' content type (picture content type does not have thumbnail), the actual Picture Library contains pretty much all the same fields, including the thumbnail. So for all practical purposes, either library type can be used for
storage of pictures. I am guessing that the Pictures Library which uses the picture content type is for backwards compatibility purposes, and that the 'image' content type is newer, being derived from the new "Rich Media Asset" content type and used
in the new Asset Library which can hold audio and video in addition to pictures.
Microsoft Help also mentioned that a Picture Library has a slide view which an Asset library does not. So my take on that is that if you want the potential of seeing your pictures as a slide show, put them in a Picture library which is still using
the 'picture' content type of previous SharePoint versions. If you want to keep pictures organized with audio/video files, then put them into an Asset library which uses the 'image' content type derived from the new Rich Media Asset content type.
Betty Stolwyk

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?

I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace.

Preview's PDF text select ignores columns and misses word spaces

I have a number of scanned pdf newspaper articles that I was attempting to copy the text from. Preview appears to register the existence of columns, as there is a pale blue background between the columns.
However when I use the text select tool, it completely ignores the column - and just selects across all columns. And when I paste the text into my text editor, it's missing all the spaces between the words, and the font size is always huge.
Conversely, Adobe reader in XP has no problem selecting by column, and the pasted text is also an exact replication of the original content. I don't know why Preview performs so badly in this regard? Anyone else experience any issues with pdf text select?

Anyone else experience any issues with pdf text select?
Yes, and not just recently.
There is a reason Preview is named, well, preview. It is not an authoring environment and PDFs are not meant to serve in that context either...unless maybe you understand all of inherent the font traps, tricks & tips and how to tune your scanning/OCR software to keep rework to a minimum.
Scanning PDFs is always tricky, and without the occasional heavy metal to bring to the task, it just seems to be that more problematic.
Keep trying, but I'd really suggest to look to other tools at this time.

Transferred appleworks documents from emac to new iMac and can't open. what app can i use or get? help! i'm not computer literate.

I TRANSFERED APPLEWORKS DOCUMENTS FROM AN eMAC TO A NEW IMAC AND CAN'T OPEN THEM. THE MESSSAGE STATES THERE AR NO APPS GO TO THE APP STORE. WHAT DO I NEED TO PURCHASE OR GET? I'M NOT A COMPUTER GUY BUT I WANT MY RECEPIES AND STUFF. HELP

Welcome James!
For no cost, you can try the open-source productivy suite LibreOffice. I don't have any AW files here to test but there are reliable reports that LibreOffice can open at least some AW files:
http://www.libreoffice.org/discover/libreoffice/
Please turn off your caps lock key. All-caps text is harder for us to read and is considered "shouting" or "anger" by most internet text conventions. Thanks!

When add a people picker (user column) in Word document (Template) and try to add a name it stuck!

When add a people picker (user column) in Word document (un the document Template) and try to add a name it stuck!
Is it a known issue?
keren tsur

Hi,
According to your description, I have tested in my environment and I have the same behavior.
Only if you type the wrong name in the first time, then you click the phone book to search the right name and save, it will stuck. It means if you do other operation(e.g. type the wrong name then click “resolve” button, then search in the phone book) and
repeat the operation above, it won’t stuck.
It is appreciate that you can submit a feedback to Microsoft:
https://connect.microsoft.com/
Thanks,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI Quicktime opens one page only. Can anyone assist?

When I single finger click on my iMac Trackpad, on a .pdf document, (happens in a webpage only) Quicktime app. always opens the document and not Adobe or Preview! If a document has severaI pages Quicktime will only show one page. So, not very useful!!
Can anyone assist?

More threads: https://support.mozilla.org/en-US/search?q=fbi&asked_by=&answered_by=&w=2&a=1&sortby=1&esab=a

Appleworks documents and Coverflow

My AW documents do not "preview" in cover flow, but .doc's do. Already did the preferences wipe as suggested in other threads. Any suggestions?

Welcome to Apple Discussions Qar
AppleWorks 6 is really an OS 9 application that was carbonized (quickly) to run in OS X but it was never coded to take advantage of the "bells & whistles" of OS X. Word documents, the .doc, like preview for a couple of reasons. They are text & both TextEdit & Pages have the ability to open them, so the preview you see probably doesn't actually come from the .doc file. Now that AppleWorks has been declared "end-of-life" you'll probably never see a preview (except the "blocky" previews of draw & paint documents if you have create custom icon turned on in preferences).

Just downloaded Mountain Lion and now none of my hundreds of Appleworks documents will open. This is a huge disaster! Please, anyone, I need a solution!

Just downloaded Mountain Lion 10.8.2 to my iMac and now none of my hundreds of Appleworks documents won't open. What a disaster! What can I do?

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now boot your computer using your Snow Leopard DVD:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.
Follow onscreen instructions to install Snow Leopard. Just be sure you select the new partition you created as the installer's target so you don't erase your Mountain Lion system.

Preview and Printing Document Problems

I am new to Adobe Livecycle and have been askedto create some forms to be placed on the internet. Please note that I am a user and not a programmer. I am in version 8.2. I have created a form and believe I have it in the correct format. I created master pages, and subforms. Everything looks correct on the screen, but I cannot view anything in the preview pdf and cannot print anything. My presence is set to visible on the subforms and the view interactive forms is set.
Any help you could give would be greatly appreciated.

Change File Associations in Mac OS X

Add Right Side Column and Web Parts to custom Master page in SharePoint Online

Hello everyone,
I hope this is a simple question, however I was fighting the issue it presents for a while. I am in the process of customizing SharePoint Online Look-and-feel with a new layout.
The site collection was created as a
Team Site before I got involved with the project, and populated with numerous sub-sites and pages. I activated required
publishing features, created html with corresponding styles and graphics, and used the Design Manager to convert the html file to the custom Master page. While SharePoint automatically assigned “ContentPlaceHolderMain” div area, I
also used default Oslo page as example to copy sections of the code for dynamic components (left column and navigation, recent items, the ribbon, etc.) from it and placed them in my new master page, pointed all CSS references to
my custom style sheets, etc. Everything works great, however I need to make one last addition -
my task is to make changes to display web parts such as Calendar and Recent Documents in the right column in the Master page.
My custom layout has a header, footer, main pan and two side columns. Most of the default master templates come with the LEFT column already embedded and populated with several placeholder
to serve dynamic content (PlaceHolderLeftNavBarTop, PlaceHolderQuickLaunchTop, PlaceHolderLeftNavBarDataSource, PlaceHolderLeftActions, so on).
My challenge is that I have the RIGHT side column as well, for which I don’t think the default placeholder exists. I need to add a small Calendar box and Recent Documents parts to it, so they
display across the entire site governed by this master page.
The issue is –
even after activating Publishing features (enabled SharePoint Server Publishing Infrastructure under Site Collection Level, and SharePoint Server Publishing under the Site
Level), there is no Snippet feature (usually available under the generic Publishing Site); this customization of the Team Site allows using Designer and apply custom templates, themes, so on, just like you would under the Publishing collection, but not the
Snippet utility I could use as the solution to embed the web parts on the master page.
Recreating the entire site under Publishing Collection is not an option due to the directions I was given, I am to use this existing one, and need to see if
there is a workaround to either activate the Snippet feature or use another solution to display the web parts inside of the column in the Master page.
If the only solution is to use Web Part Zone, what are the steps to add it AND populate it with the abovementioned apps?
Can anyone suggest how to create a workaround and add this feature? The environment is role-based so both elements need to be dynamically rendered based on the user’s role and activities.
I am more of a front end designer than developer, so if any custom coding and set up required, please kindly provide some basic steps, if possible?..
I greatly appreciate any help and suggestions!
Thank You!
Jeff
Jeff V.

Updating your Master Page to also include a right rail should be sraight forward enough with a new div or divs in your master page and then the proper styles to make room for this column as well as position the column.
I have not seen why you cannot find the snippet gallery link when previewing a HTML Master Page in the browser. Have you tried loading the snippet gallery by its url? As an example, for my tenant on SPO, I can load the Snippet Gallery for the olso.master
with the following url:
https://pixelmill.sharepoint.com/_layouts/15/ComponentConfigureControls.aspx?ComponentName=TopNavigationNoFlyoutWithStartNode&Url=%2F_catalogs%2Fmasterpage%2Foslo.master
Change the domain to match yours as well as update the "Url" querystring var to point to your master page. See if that loads the snippet gallery.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

AppleWorks documents not opening

So I don't really know what I am doing. I have a really old version of Apple Works on my old computer and have taken all the documents from it and put them on my MBP. I have not bought Word, Page 2, or Apple Works. Any suggestions on which one I should purchase? I was thinking I would get the Page 2.
I have the 30 trial for the Word but I cannot open any of my AppleWorks documents. How do I get these open and save them in a way that is compatible with Word or Page 2?
Thanks!

Welcome to Apple Discussions michaeldurant
Other than the fact that your document won't open, your question/problem is not the same as the original poster's (OP's) & it would have been best for you to start a new topic.
256 MB of RAM in OS X is minimal & 512 MB is still on the low side when working with documents with a lot of graphics. The amount of space the documents takes up on your hard drive, 55 MB for yours, is not the same as how much RAM it will use, although the bigger the file size, the more the application & system resources will be taxed. I have a database with photos in a multimedia field that takes 87.3 MB on my hard drive. Checking in Activity Monitor (in the Utilities folder), Real Memory for AppleWorks goes from 15 MB to 41+ MB after opening the DB.
It's possible that one or more of the pictures you added in the last week are corrupt. If you have AutoSave turned on in Preferences & can remember when the last time you were able to successfully open this file, you may be able to find a copy more recent than the 35 MB one. Look in Documents > AppleWorks User Data > AutoSave where you will find documents with files with long names consisting of letters & numbers. Sort the folder by date in List view & try opening one.
Since this is a word processing document, if you have Pages (part of iWork) installed, Pages may be able to open it. Also, a text editor may help recover any raw text, not the pictures, if you need to rebuild the file.
I don't know how you are putting the pictures in the file or what format the pictures are. AppleWorks does best with graphics in PICT format. Even though the PICT files themselves are larger in the Finder, the resulting AppleWorks file will be smaller &, probably, less likely to corrupt. I use GraphicConverter to convert graphics to PICT for use in AppleWorks, but you can also use Preview.
Please post back whether or not any of these work.

Report with Invoice and Accounting Document Number

Dear Experts,
Here i have a requirement.
I wanna a report which gives a Invoice (MIRO) and its accounting documents (Follow on document) in one page. Because If I view a MIRO document, for checking the accounting document, I need to click on Follow on doc, then I'll get.
But If wanna see for 1000 MIRO documents with accounting document number, then I don't want to click 1000 times to see the account doc for respective Invoice number.
The approximate format is,
Column 1                              Column 2     Column 3        .......................              Column n
MIRO (Invoice number)                             Accountting Doc Number
5100000099                                              5100000011
Which tcode will give the both in one screen?
Thanks in advance
Regards,
navahsek

Hi,
Enter Sork Key 002 for Vendor Master Record.
and also you can check the Report in ECC 6.0
MIR5 - Display List of Invoice Documents
There you select Export Mode --> Display Accounting Document Number.
You can get Report FI and MM Document Numbers.
Hope It will Clear.
Regards,
Kishore

Preview column and appleworks documents

Similar Messages

Maybe you are looking for