Price conditions download problem

Hi!
I have a problem with downloading to CRM price conditions. I have some price objects (DNL_COND_A002, DNL_COND_A003...) in R3AM1 with yellow light. They stuck in queue with SYSFAIL. In SMW01 for specific BDoc I have message:
Target table CNCCRMPRSAP002 is not actively available
There is no active target table for an application for usage A.
Error when carrying out initial download.
Objects:
DNL_CUST_CND
DNL_CUST_PRC
DNL_CUST_FGD
were downloaded correctly.
I've tried to find table CNCCRMPRSAP002 in CRM but it doesn't exists. Please help!
Best regards
P

Hi Piotr,
You could think of generating the adapter object in transaction SMOGGEN.
and also check the table CNCCRMPRSAP002 is activated in CRM system,then upload the adapter object.
I hope, this could help you...
Regarsd,
Saurabh

Similar Messages

KMANU field value download from R/3 to CRM for price Condition type

Hi
We done changes for KMANU field in R/3 - price condition type and that changes have to download from r/3 to CRM. I was tried below object adapters to update field value (R/3 u2013 table name: T685A - KMANU) from R/3 to CRM (Table :PRCC_COND_CT u2013 KMANU). Could you any one tell me how to resolve it. Its urgent plz
u2022         DNL_CUST_CNDALL
u2022         DNL_CUST_CND
u2022         DNL_CUST_PRC
u2022         DNL_CUST_FGD
u2022         DNL_CUST_PRICE
Appreciate your help...........
Regards
Sri

Hello Sri,
Ideally object DNL_CUST_CNDALL should get all changes done to customizing setting in R/3 to CRM.
Did you check the logs in txn CND_MAP_LOG_DISPLAY in CRM?
You can get some hints there, if any error has occured during the download.
Best Regards,
Shanthala Kudva.

Probleme with price condition

hello,
I have just created a info record for vendor 201031 and purchasing org Z001 and material 200000001 with price conditions (PB00, RA00, FRB1).
when I have execute tcode MEKE (condition by vendor) for vendor 201031and the purchasing org Z001 I had this message: No condition types with access sequences found.
thank you to explain it to me what is this problem ? I owe acivre something? should I update vendor data ?
NB: if you have examples of document step by step for price conditions, thank you to send it to me on: [email protected]
in advance thank you .
Said

Hi ,
Pl go through this link.
http://www.sap-img.com/materials/steps-for-mm-pricing-procedures.htm
Thanks
Dipak

Condition Period Problem in Sales order - Need help

Hi Gurus
I am testing Sales Order back dated
Condition period Problem in Sales order
example for you to understand
Sales Order where PO date is 17.12.2007
Del Date & Price date is 13.02.2008
Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
Rajesh Chalke

Hi,
I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
Cheers,
KC

How to avoid user from entering new price condition in return order

Dear Expert
We are facing a scenario where we make return order; the Price is copied from the invoice. And it is working perfectly. The system does not allow us to change the price.
The issue we are facing here is that user can input new condition like discount /premium and change the net value for the return order pricing, and this will reflect in the credit note for returns.
Is there a way to restrict the user from entering any pricing condition in the header or item conditions tab.
although we cannot change the original price coming from invoice referenced for return order, but the user can input new price conditions as below. This must not be allowed.
The price must come according to the Qty being referenced.
While making the credit for returns, the user has a chance of further making changes to the net value by adding new conditions. Hence this must also be restricted for any changes.
Thanks
Edited by: Lakshmipathi on Jan 31, 2012 6:55 PM
Thread Locked - Reason Cross Post

okie .... i will tell briefly what is the problem ....
Take a scenario wherein a user has logged into my application and he is performing a task which will put his user id and his employee id into the session. Then he opens another window by using either ctrl+n or through files->new window.
So now a new browser will open but the session will be same ..... in this newly opened browser, user performs some operation which will remove the user id and employee id from the session .... Now if he again comes back to the first window and tries to do some operation, then a null pointer exception will be thrown saying that the employee id is null .... because he has deleted that in the newly created browser ..... to avoid this situation what can we do ???? can you please help me in this regard ??? you got my problem right !!!

How to limit the number of price conditions in a sales order

Dear experts,
We've created discounts in our pricing procedure, and they are added manually. They have a maximum.
But the problem is that the user can add several discount price conditions in the sales order!
Is there any customizing to limit the number of occurrences to 1 in the pricing procedure?
Thank you for your help
Marjolaine

HI,
You can make use of feature to maintain maximum and minimum limits per condition type.
SPRO > SAP Implementation Guide > Customer Relationship Management > Basic Functions > Pricing > Define Settings for Pricing > Create Minimum/Maximum Limits
In this activity you can restrict manual processing of pricing conditions in transactions using minimum and maximum limits per condition type.
Kindly reward with points in case helpful
Sharif

How to block post price conditions in purchase order

I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your help

The system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

ME22N change Exchange rate type at price condition level

Hello,
In ME22N exchange rate type is 'M' by default. When a price condition has currency different than purchase order this 'M' rate is used.
Now I need to change this 'M' rate but for particular price conditions (and exchange rate type can be different for each price condition). Don't ask me why:-) This requirement comes from business consultant and he knows that there is no user exit for this. I need to modify standard. The problem concerns items price conditions.
I'm not asking you for a complete solution, but maybe you can give me a hint where to start? What is the function module which perform price calculation (where exchange rate is used) in ME22N.
I tried to change KOMK-KURST in price condition rule (the procedure which is called to check if price condition has to be calculated or not). It is called for each price condition and I know a name of price condition. But I think the exchange rate type is read at the beginning and stays unchanged even I changed KURST.
I also found function module READ_EXCHANGE_RATE, which has rate type 'M' by default. I could put my modification in place where it is called. But it is not called when I press button Update price. It is only called when I change the currency of condition and press enter. This FM is called in few places in ME22N but not when I'm refreshing prices. Maybe during a refresh it has already an exchange rate? If so, READ_EXCHANGE_RATE could be a solution, but... It is not called when price conditions are created for the very first time (when I create PO item). Maybe system calls different FM?
I also tried to use trace (ST05) to see where systems reads from TCURR, but I think some buffers are used and TCURR is not in trace.
So now I'm stuck hoping for your help.
Best regards
Rafal

Prabhu Peram wrote:
Hello Rafal ,
>
> still im trying to understand your requirements , anyhow if you change/propose new exchange rate at header level , then system wont put type as 'M'.
>
The problem is that if I set a new exchange rate type, it will be the same for all price conditions. My requirement is to have different exchange rate type for each price condition. The pricing procedure will loop at each price condition, and depending on condition name I need to have different exchange rate type.
Example:
condition XMER is in EUR and must be converted to USD (factor should be 1,234)
condition XMET is in EUR and must be converted to USD (factor should be 1,567)
Now the factor is the same for all price conditions.
I have found interesting table XKOMV. It contains price conditions and there is a field with factor value. Now I will look for the place where this table is filled with data or for the place where I can modify factor values before XKOMV is used in pricing procedure.
Best regards
Rafal

Manual price condition (%) in order creation (using ABAP)

Dear community members,
I could use some help on a problem I have encountered while creating a sales order (in the CRM system) using ABAP programming, the details are given hereunder:
I have two manual price conditions used to set a possible discount, one using a straight value and one using a percentage:
1. When the order is generated using the value (let us say 100€) it cointains the correct price condition.
2. On the other hand, when the order is generated using percentages (i.e. 10%), it is created without explicit errors or warnings but with no price condition in it.
For the latter case I have checked the IPC logs (from transaction SM53) finding this error message:
Message: Condition cannot be processed manually
--> com.sap.spe.pricing.transactiondata.exc.ManualChangeNotAllowedException: Condition YSCP cannot be processed manually
at com.sap.spe.pricing.transactiondata.impl.PricingCondition.changeConditionRate(Ljava/math/BigDecimal;Ljava/lang/String;Ljava/math/BigDecimal;Ljava/lang/String;)V(PricingCondition.java:3124)
at com.sap.spe.pricing.transactiondata.impl.HeaderCondition.changeConditionRate(Ljava/math/BigDecimal;Ljava/lang/String;Ljava/math/BigDecimal;Ljava/lang/String;)V(HeaderCondition.java:387)
at com.sap.spe.pricing.transactiondata.impl.PricingDocument.addHeaderCondition(Ljava/lang/String;Ljava/math/BigDecimal;Ljava/lang/String;Ljava/math/BigDecimal;Ljava/lang/String;C)Lcom/sap/spe/pricing/transactiondata/IHeaderCondition;(PricingDocument.java :1472)
at com.sap.spe.document.rfc.AddPricingConditions.handleDocRequest()V(AddPricingConditions.java:131)
at com.sap.spe.document.rfc.DocHandlerAdapter.handleRequest()V(DocHandlerAdapter.java:72)
at com.sap.spe.base.util.jco.HandlerAdapter.handleRequest(Lcom/sap/vmc/RFCContainer/Call;)V(HandlerAdapter.java:117)
at com.sap.vmc.remserver.RFCDispatcher.handleRequest2(Lcom/sap/conn/jco/JCoFunction;)V(RFCDispatcher.java:995)
at com.sap.vmc.remserver.RFCDispatcher.handleRequest(Lcom/sap/conn/jco/JCoFunction;)V(RFCDispatcher.java:746)
at com.sap.conn.jco.rt.VMCServer.dispatchRequest(Lcom/sap/conn/jco/JCoFunction;)V(VMCServer.java:911)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(Lcom/sap/conn/jco/rt/ServerWorker;Ljava/lang/String;)V(MiddlewareJavaRfc.java:3415)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(Lcom/sap/conn/jco/rt/ServerWorker;)V(MiddlewareJavaRfc.java:2468)
at com.sap.conn.jco.rt.VMCServer.listen()V(VMCServer.java:766)
at com.sap.conn.jco.rt.VMCServer.run()V(VMCServer.java:689)
at com.sap.vmc.remserver.RfcServer.run()V(RfcServer.java:376)
at java.lang.Thread.startup(Z)V(Thread.java:1954)
I have already debugged FM CRM_ORDER_MAINTAIN but to no avail, maybe I just missed something and I can assure that the customizing is correct and aligned between the systems and both the conditions are set to be processed manually.
At this point, since the condition is applied when the commit is yet to be done I wonder whether it is possible to apply a discount percentage on prices which are yet to be generated, it would be illogical to do so and then again while using a straight value (which does not require a calculation) the order is correctly generated.
Furthermore when I add the conditions in an order (from both the GUI and the WUI) the table IT_PRIDOC is alway empty, even if CT_INPUT_FIELD is populated.
I know that there are similar posts here in SCN but sadly I was not able to find a solution so any help would be greatly appreciated.
Thanks in advance for any replies given,
Alessandro.

Dear Padma,
apologies for my late reply. I also thought it should be possible to use a percentage but I was not sure.
Sadly the debugging did not bring about any positive result.
I also tried to make a second CRM_ORDER_MAINTAIN call after the system generated all the pricing conditions but that also did not work.
There is one thing that caught my attention though:
- YSCV (fixed amount): still no problem at all (passed to KBETR);
- YSCP (percent): if I assign a value to KWERT or if I leave all the fields empty, the condition is created in the sales order but it is always set to 0%. However, if I try to assign it to KBETR, I always get the message: "Condition YSCP cannot be processed manually".
I made some attempts with the customizing, for example adding the condition to the "easy entries" or playing with the options of "Create Condition Types" (always aligning the systems) without getting positive output.
I am beginning to think that it could be an IPC-related problem (which is not my area of expertise... yet).
Alessandro.

How to block post price conditions in purchase order after doing MIGO

I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your help

The system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

Purchase Info record price conditions

Hello Gurus,
My client wants to extract their Purchase Info Record in R/3 to the BW Environment. This I have already done.
The problem now is that my client wants to see the price conditions associated to the Info Record. To see the conditions you have to select validity time period first and only after that you have the prices associated.
Do you know if there is a way to transfer this kind of data to BW without creating a custom DataSource?
Best regards

hi,
Yeah, I just checked it..
Its not possible in Std. SAP system...
There is no field provided for the same...
the other way, but doesn't applies to you...as you are doing massive job...
still if req. then check..
The other way is:
Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
Regards
Priyanka.P

Manage two invoice posting for one price condition in sales document

Hello Experts,
I am a new user in SD module especially for billing and pricing part, and i have a specific requirement from my client that i cannot find the solution. Could you please help if you have any idea to resolve the following situation:
I have a plant in UK which create a sales order for a customer X for a material M with a specific amount.
For the invooice creation, the goal is to create two invoices:
- One with net value billed in USD,
- one with GBP to bill the tax.
I tried to use billing plan, and i was able to generate the 1st invoice without tax through pricing procedure that don't manage Tax condition, however i am blocked when trying to generate the second invoice that contains only the tax.
Do you have any idea how can it be managed?
Thanks for help
I can add more clarification if needed.
Thanks

Hello,
Thanks for feedback.
In fact the Customer master data currency is USD, and company code is in UK so it is GPB.
The target is for some business case the customer is invoiced with Net value in USD, and the tax will be invoiced in GBP.
But the problem is that i cannot manage two currencies and two invoices for one price condition.
So I am wondering what is the best solution, How i can generate two output types for the same price condition.
I tried to set up pricing procedure without tax, to manage the Net value, in first line of the billing plan.
But i am not able to generate a seconde line with only the tax condition.
DO you think that is possible?
Thanks

Sending price condition in WBBDLD for POS outbound

Hi experts
I am facing some problem when do configuration in order to send the price condition to POS through message type WBBDLD.
Client is using ZP01 tag price instead of VKP0 as the condition
Below are the config that I have performed but the price is not sending out.
1. (Sales and distribution --> POS interface --> outbound --> maintain POS condition type group) A new condition type group is created that replace VKP0 compared to the original SAP standard one.
2. (Sales and distribution --> POS interface --> outbound --> maintain profile for POS outbound) A new POS outbound profile using the above new condition type group
3. Site maintenance WB03, assign above new POS outbound profile to the specific store
4. (Logistics-general --> assortment --> assortment list --> controlling condition change analyses --> direct entry for creating the worklist --> activation of the direct entry for creating the worklist) tick "direct entry indicator" for 50 assortment list
5. (Logistics-general --> assortment --> assortment list --> controlling condition change analyses --> maintain filter setting for condition types) Add a new row for ZP01 for table no. 901
Really appreciate your advice.
BR
Dom

Hi Honghai,
Actually it's based on the customer pricing procedure. The default one is VKP001. If you assign the other customer pricing procedure in Tcode: OVKK, you should add the condition type to the corresponding pricing procedure.
Jessy

AFS-Retail interface about price condition

Hi gurus,
I am configuring the AFS-Retail interface. Everything is fine except the price on Retail side is not updated. The scenario is: when value of sales price condition say PR00 on AFS side is changed from 120 to 130, the value of the purchase condition say PB00 on retail side should be updated by ALE and IDocs. There is a customizing table about PR00->PB00 MAPPING in AFS side. The problem is I can tigger the IDoc sending by change PR00 via VK12, but the outbound IDoc is still about PR00 not the PB00 I expected. I search all the notes and related SAP help docs, there are only general info about this price distribution scenario but not the step by step configuration. Also we successed in other ALE/IDoc scenario, so there is no problem about the configuration on them. We are on AFS 5.0. Anyone familar with AFS-Retail please give me some clues.
Thanks,
Tony

Hi, Dennis:
I am working on a similar situaltion and I came across this post.
If I need to use SAP table A004 and KONP on R3 to get list price to BW.
Do you think there is any standard SAP extractors offered?
I am not sure if all "Axxx" related tables does not contain any SAP related built in extractors.
thank you!!
Sylvia

Price conditions PO

Hi Gurus!
I´ve a problem whit a price conditions in PO. Scene:
I have a price that is added manually to a fixed value. For example for $ 1000. It´s a position price condition. The amount of the position is 100 units.
Well, The problem here is that when the entry materials by a smaller amount , the value of the condition, is assessed in units entered, and what I need is to respect the total value of $ 1000.
Someone knows how to solve this? Please I need your help,
Tks
Regards
Vasco

from OSS Note 304178 - Absolute conditions in purchasing documents
Symptom
Absolute conditions, for example, used at item level in the purchase order item, are calculated down to the item quantity.For the goods receipt, if a quantity differing from the item quantity is posted, this absolute condition is nevertheless quantity-dependent since it is only calculated proportionally.
Other terms
Delivery costs, freight costs, freight, absolute value, FRB1, flat rate
Reason and Prerequisites
For the goods receipt, the actual posted quantity is not yet available, as far as the program is concerned, at price determination.If the actual posted quantity is available later, the condition technique is not used again for the calculation.Therefore the only option remaining is the proportionalization of the condition values.
Solution
None.

Price conditions download problem

Similar Messages

Maybe you are looking for