Price diff in receipt and issue

Hi gurus
Good Morning
I'm getting different values in "amount in LC" for same material at the time of goods receipt (In Mvmt type 101) and Goods Issue for order (Mvmt type 261).
It comes nearly Rs.40-50 difference.
So why it shows different.
Quick responce will be highly appreciable.
Thanks
Prasant

Dear Prasant Sekhar,
You got the difference values, because of price control in the Material Master(Accounting View) and in the Material Type also.
If both materials valuated at a standard price and materials valuated at a moving average price, goods issues are always <b>valuated at the current price</b>.
Consequently, a goods issue reduces the total value and the total quantity in relation to the price, and the price remains unchanged.
Goods issues do not change the moving average price that is recorded for informational purposes for materials with standard price control.
With regards,
B.Ravindranath

Similar Messages

Opening closing stock receipts and issues analysis

Hi,
Is it possible to match the values in the MC.A (Total Receipts and Issues Values) to Gl Accounts,
If it is possible How?

Hi,
from within the MC.A there is a link directly to the accounting documents that are involved.
Go to the menu option Extras > accounting doc for material when you have the data for a material displayed.
By careful and make sure that you have selected the correct flag on the values window of the initial selection screen.
Steve B

Urgent:Receipt and Issue values in Inventory 0IC_C03

Dear friends,
In standard cube 0IC_C03 keyfigures Valuated stock Qty and value is matching with R/3 Transaction code MB5B.
Receipt quantity and Issue quantity in MB5B is not matching for some of the materials.But it matches with R/3 Tcode MB51 as it have all the movement types.
1.Pls suggest what needs to be done in BW to match the data with MB5B Receipt and Issues?
2.What are the movement types are used in MB5B?.(For ex 321 is displayed in MB51 but not included in the R/3 report MB5B)
Thanks in advance for your help..

Dear Gurus,
Recently we had Implemented the Inventory Management for Retail. Taken downtime and loaded the data by following all the steps. The data is successfully loaded till Nov 2010 to till date. Now when I am comparing the data with R3 using MB51, I am getting the below issues.
We have report in BI, on Material Ledger and we run above query for the duration of 1st Jan 2011 to 31st Jan 2011, This appear to be difference in the output.
BI opening quantity does not match with ECC MB5B opening matches.
1. Few of my BI entries of Movements are not present in R3.
2. Few entries are with no movements present in BI.
3. Some entries of R3 are not present in BI.
Can anyone guide me....

Change in PO Price after goods receipts and goods issue

Dear All,
Happy Holidays!! Wishing you a happy and fun-filled holiday season.
I would appreciate your input of the issue at hand. I support MM users in and Oil & Gas downstream company.
Issue
Purchase Orders are created using price estimates. The price of oil products fluctuates and we usually cannot get the exact price at the point of creation of the PO.
We use Moving Average Price (MAP) for stock valuation and so the price & quantity in the PO affects the moving average price.
We use price estimates to create the PO but when we receive the final price for the oil products from the Supplier, most times there is a significant difference between the estimated price and the final price. Usually, at this point, we have completed all goods receipts and goods issues against the PO and are unable to make changes.
We have an issue posting the invoice because the invoice value is significantly higher than the PO value. We also have an issue with the moving average price because it is understated as a result of this.
To reiterate, this is a summary of the issue:
At the point if PO creation ; Quantity = 10, 000 MT Price = $650
Later when final price is available; Quantity = 10, 000 MT Price = $715
Any advise on how to treat this issue, please? Your assistance will be truly appreciated.
Thanks

Hi All
For my client I have to map the similar requirement for material price which is subject to more than 15% fluctuation. The actual invoice price is having quite a huge difference.
Below are my limitations within which need to give a solution.
PO is subject to release strategy and Material is delivered over a longer duration of time. Hence there is problem to de-Release the PO everytime price is changed.
Since differnce is so huge, the same can not be settled during the MIRO.
Down Payments has to be posted hence PO has to be created with estimated base price.
Please suggest me suitable alternative options which will require no changes in PO and the price change also can be accomodated during the MIRO for Multiple goods receipts.

Material Consumption - receipts and Issues

HI guys,
i have an issue with material consumption
Initial stock = 0
Purchase order    =1000 kgs - Rs 100000
goods receipt       = 1000 kgs
Total stock         = 1000kg
Goods Issue       = 1000kg
Total stock         = 0
Invoice receipt    = Rs 102000
the extra Rs 2000 will go to price difference account.
this happens very often with our client. if the extra costs are hitting price diff account every time, my issues consumption will be different from raw material receipt values.
it will not update my raw material price. (maintained in MAP).
my raw material consumption will be different from what i received. what is the solution for this.
this happens in imports also. where in u will receive clearing agent, port dues, other frieght charges when the material stock is zero. so the whole value will be posted to price diff account. what abt my price updation?
Regards,
Edited by: Girish on Aug 21, 2008 6:13 PM

Hi,
You can not avoid the postings in Price difference A/c if enough Stock Coverage is not there.
But you can post the Price difference value to the Material Account using "Materials" Tab in MIRO
To activate "Materials" Tab in MIRO, go to SPRO > MM > Logistics Invoice Verification > Incoming Invoice > Activate Direct Posting to G/L Accounts and Material Accounts

Distribution of raw materials price diff. between FG and CO-products

Dear All,
We do have production of Finished goods. Production scenario is process industry.
So process orders are defined as CO objects.
Goods receipt and co products receipt occurs as well.
We want to valuate CO-products by actual costs.
We have defined cost apportionment to CO-products in mm02 at the Costing with equivalence numbers.
The issue is that this structure mentioned above works only for distribution costs allocated from process order.
But raw materials, issued for process order, price difference are not distributed to CO-product. They distribute only to Finished good.
Could anyone advise us please, what badi or exit could be used for distribution raw materials price differences to CO-products?
With best regards,
Kamila.

Hi
Only way is , after changing the raw material price, do the Costing Run for all dependent FG & SFG. and go to the below reports for your expected result.
S_ALR_87099930 - Results of Costing Run
S_ALR_87099932 - Variances Between Costing Runs
VVR

SAP R/3 goods receipt and issue process through RF

Dear All,
We need the below information.
In order to setup RF enabled goods receipt and goods issue what basic infracture we need to have.
we are not intersted in using WM module, with out WM we can go for this ??
Is this the right forum to post this question...
Abdul Raheem

Hi.
I've just carried out this architecture. You have to check 2 things:
1- Are your DB software levels the same? (AIX + Windows)
2- Have you checked connectivity from client to DB server?
Regards,
Fatih Erten

Receipt and issu

i get the total value and qty of purchase materila and issu material in the fisical year or one month. Can it is possible i used sap b1 2005a any body write a query i purchased local and imported materile
thanks

yes

Price diff and material a/c

Hi,
I have 2 clients .In both the clients I made PO for Rs 1000/- and i made GRs (MIGO) and Inv verification i posted for Rs.800/- only. In one client Rs.200/- (cr)was posted to Price diff a/c and in other client Rs.200/-(cr) was posted to Material a/c. In both the client a/c determination is same why it is happenig ? Pl help me.
Thanks
Prasad

Hello,
In your case follwing condition value goes in to price difference account
1) When there is no sufficient stock coverage.
If there is stock coverage value is loading on material but if there is no material where we can load the value?????.......This value is loaded on price difference account.
Pls check the stock on posting date from MB5B and check what was stock for two clients.
Reward points if useful
Regards
Kedar Kulkarni

Material wise reciept and Issue report with Opening and Closing Stock

Hi
I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
Or we have to go for Customised Report.
Please reply

Hi,
MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
Regards,
Laxmi

Report to see PO and invoice price diff

Hello All,
Which t-code/report can I use to see any difference between PO price and info record price diff?
We have a customized tcode ZMMR003, but it is giving runtime error even if I run for one date and corrsponding data exists..
Regards,

Dude, as far as Z is concerned you want get much help from any source.
Firstly goto ST22 and see the cause of dump -> get it rectfied from your technical guy.
Next you can check RM07MMFI report. if you dont see this goto se38 -> type *MMFI -> press F4.
Try FBL3N also

Reg Price diff for latest invoice and last invoice without user exit or bac

Hi gurus,
This is regarding the price difference of the latest invoice document price with respect to the price of last time the document was invoiced.Without using the customer exit or back-end developement. need info if this can be done on the front-end using the front-end tool bex designer using the CKF, RKF , Variables or conditions etc
say for instance the user wants to get the price differences with respect to the invoices for a certain period that is from 01/01/2008 to 06/30/2008( dynamic entry can be any range).
Once the user enters the range for the billing document date as 01/01/2008 to 06/30/2008 the query should return the report as
Sold-to(customer) Material, Bill doc date and the price difference. these are the four columns the users needs in the report.
now the bill-doc date will the latest invoice date for the sold-to & material, but the price difference will be the price of the last invoice date(for the sold-to , material) - the latest invoice date price.
Example. between 01/101/2008 - 06/30/2008
customer : 2765 , material : XAWE33636FD this particular customer-product had 3 invoices on 02/15/2008 , 04/18/2008 and 06/03/2008.
price on 02/15/2008 : $1.09
price on 04/18/2008: $1.87
price on 06/03/2008: $3.84
so the report should look like
customer material bill doc date price diff
2765 XAWE33636FD 06/03/2008 3.84- 1.87( latest invoice price - last invoice price)
Thanks
appreciate responses

HI,
Try this:
EXIT_SAPMM06E_013
*" XEINA STRUCTURE EINAU OPTIONAL
*" YEINA STRUCTURE EINA OPTIONAL
In debug find out what values are stored in XEINA and YEINA. One is the old value and the other is the new value.
Regards,
Subramanian

Goods receipt and goods issue smartform

Hi :
   Is there any standard smartform for Goods receipt / Goods issue slip ?
How to create a customizing form using smartforms when a material document is created and saved .
Thx.
Raghu

Hi,
Convert the SAP SCript to Smartform by using the migration option in Smartform
select the appropriate script for your requirement
for example
for GI
WASCHEIN
WA_LB_VERS1
WA_LB_VERS2
for GR
WESCHEINVERS1
WESCHEINVERS2
migrate the same from script to form
then use these
/SMB40/MMGI1_A              Goods Issue slip version 1
/SMB40/MMGI1_L              Goods Issue slip version 1
/SMB40/MMGI2_A              Goods Issue slip version 2
/SMB40/MMGI2_L              Goods Issue slip version 2
/SMB40/MMGI3_A              Goods Issue Slip version 3
/SMB40/MMGI3_L              Goods Issue Slip version 3
/SMB40/MMGR1_A               Goods receipt slip version 1
/SMB40/MMGR1_L               Goods receipt slip version 1
/SMB40/MMGR2_A               Goods receipt slip version 2
/SMB40/MMGR2_L               Goods receipt slip version 2
/SMB40/MMGR3_A               Goods receipt slip version 3
/SMB40/MMGR3_L               Goods receipt slip version 3
Hope this helps
regards
Shiva

Goods receipt and post goods issue are not updated back from EWM to ECC

Hi Experts,
Would anybody able to tell me the setting to be modified / defined to backward flow of information from EWM to ERP i.e. the goods receipt, goods issue are not being updated back in ECC once the goods receipt and post goods issue are posted in EWM?
It would be great help if i get the response as early as possible.
Chakrapani Das

Hi Chakrapani,
You might want to try checking the customization on the SCM part following this path:
SPRO - Extended Warehouse Management - Interfaces - ERP Integration - General Settings
Pay special attention on the Check of ERP-EWM Configuration transaction.
After you have checked these you should probably check the outbound queue monitor (tx SMQ1) from EWM to ERP. You can use the SMQ1 - Outbound queue and SMQ2 - Inbound Queue both in ERP and SCM to check the communication betweene these two systems.
Also you may want to checkt the SLG1 - Analyse application Log in SCM in order to see if any internal bugs exist.
All the best,
Claudiu Maxim

Goods Receipt and Goods Issue - Posting Date and Document Date Problem

Hi All,
I was using SDK to build own add on to insert Posting Date and Document Date under Inventory> Inventory Transactions> Goods Receipt and Inventory> Inventory Transactions> Goods Issue, but the UI Screen Posting Date and Document Date shown current date.
My SAP Business One version was 2007A SP00 PL42 and alreadly upgrade to SP05.
End up result still the same.
Is there someone can help me?
Thanks you.
Best Regards,
danny

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

Price diff in receipt and issue

Similar Messages

Maybe you are looking for