Price on PO print

A PO has been created with following conditions,
PB00 Gross Price 50.05 EUR
RA01 Discount on Gross price 50 EUR
and hence net price is coming 0.05 in condition tab.
But when I am checking the PO printout its getting populated from PB00 condition. Please guide me where can I check the settings.
It should be net price (0.05 EUR), which should reflect on PO print.

Hi,
For PO print may be PB00 condition type included and RA01 condition type not included in the FORM/SAMRTFORM. Just cross check the program ,FORM/SMARTFORM and routine assigned to your PO output type in NACE t.code for application EF. Just check with ABAPer for inclusion of RA01 condition type in the FORM/SMARTFORM you are using for PO print.
Regards,
Biju K

Similar Messages

Purchase order price roundedoff in Print out

Hi
In purchase order material price is 0.068 USD but in Purchase order print view
It shows rounded off as 0.07USD
how to change it as 0.068 in PO print view
Thanks

Hello,
Please check up the ABAPer to see the logica incorporate in PO FORM.
If necessary you need to incorporate the logic into the FORM.
Regards,
Ravi

PO price not getting printed

Hi ,
When I create a PO without the Inv Receipt check box in the Item details (Invoice tab) the net price is taken as 0. And consequently I do not see the price appearing in the print preview of PO.
My question is : I do not want to do a Invoice. But I need a price in the PO and it should get printed. Do i need to change the pricing condition for this? Or is there any config change that I can make so that the Inv receipt check box and net price are not affected at the same time.

Hi
In such cases of free goods where you need to print the material price, the material price needs to be picked up from the material master.
In the Print program you need to do this modifictaion,
If the PO line item if Flagged as free godds then you need to pick up the price form MBEW table.
Please witre a note that this item is a free goods & carries no valution, price mentioned here is for valuation only.
In case of Stock transfer between storag locations the same logic is used.
If you donot complete the invoice , then the anmount will be pending in the GR/IR Clearing account, which is settled by an invoice
Thanks & Regards
Kishore

Report print price indicator for outline agreements

Hi Gurus,
Good day. I would like to ask if there is a report that we can generate to be able to view which contract items have a print price ticked/ unticked.
Appreciate your help.
Thank you so much

What if i just wan to see contracts with unticked print price indicator.
In ME3N > Dynamic selections >Purchasing Document Item > Select Print Price > Double click, Print price comes on right side, now click on Multiple selection tab (tab with arrow) which is at right side, new window opens, there select tab 'Exclude Ranges' & enter Lower & Upper Limit as 'X', execute, enter all your values & execute again, it will exclude the items which are having print price.

HP Deskjet 2540 All-in-One Printer

Hello. I was wondering if anyone has used this printer on their Macbook OSX 10.9.1.?
Or any other suggestions for compatible printers. I was bummed when I realized my Kodak wasn't compatible and now have to get another printer.
My range of price for a printer would not be more than $80 so I'm hoping you guys can help me find a printer good enough. All I need it to do is to print documents and scan. Nothing more, nothing less.
Pleae help me, thank you!

Turn On AirPrint via webinterface
Turn On Wireless Direct via webinterface
Reset Printing system
Add Printer via Default: Bonjour
Scan works for me now...

Printing envelope not formatted correctly on custom size 8.75 by 5.75

Printers and All-In-Ones running win 7 64 bit, officejet 8600 pro all update current, In works 2007 word processor or 2011 Hallmark card progam. downloaded latest driver and reinstalled same (deleted original dr and rebooted first). Envelope is correctly positioned, address prints at top of flap side return address is missing. On plain paper (8.5X11) test print, address & return address appears to be in correct position.

I have the same problem with the same size paper (aka Invitation or Statement size), and have an additional problem with printing to the corresponding envelope size which is a Standard A9 (5.75"x8.75"). These are both standard size papers for the U.S. and are used in printing wedding invitations. I don't understand why there are programmed sizes for Japanese stationary, but not for all standard U.S. size formats (that will fit in the main feed tray) or the ability to create a Custom Size format.
Because these features weren't available, I ended up paying a local printer to print my New Year's cards (an expense I wasn't anticipating that equaled half the purchase price of the printer). And, since I can't print on the envelopes I will need to print labels, which I was hoping to avoid because I hate applying labels to envelopes.
HP, please update the software to allow customers to print to all appropriate Standard Size US formats or allow for customization, otherwise my next printer will be purchased from a manufacturer that does provide this ability.

Invoice printing issue

HI ...
I have an issue in printing invoice.....
invoice contains 7line items per page....
Against that particular invoice original copy which was taken print out , tha last item line is completely missing and that too
suppose ...last item 070   cs   12345     lemon tea description   4343.00       1234.00
                                                               *non-taxable*
                                                               *support*       ....
In the above displayed last line item 070 line is completely missing ,but the 2nd and 3rd line of the description in next lines are being displayed.....
and this problems occurs only in the first print in ,when it is printed on a plain paper it is perfectly fine and displays the first line as well...
i want to know how to debug and find the solution in th driver porgram as i think the problem is inthe logic of driver program.
output type is rd00..and it is only single output type....
please help me solve this ticket as its on high priority.....sos
thanks in advance
Santosh

Hi Expert
seenario 1:
Unit price is not printed in Invoice, in case the item condition type is ZN00. Customer is demanding that every item does appear on the invoice with an unit price
Scenaro 2 :
Customer requires item details of the individual invoices on the invoice list; they want to see the lines for full service and rental separately. Currently smartform ZSDINVOICE_LIST_SF_PORT does not support this
Please help me on this issues

Price of line item coming as zero in SA

Dear Friend
We have a scheduling agreement with 6 materials, The vendor sent us the price amendments ( vendor sent us on 26.05.09) that happened from 1st February 2009. Thus we will send them a debit note to vendor. Can I give a price amendment in the past date ? Can I amend the price within 1.05.09 to 30.05.09?
I need to take print out of the SA with old price stating the amendment dates as 1st July, 2008 to 31st January, 2009 and the next price amendment from 1.05.09 to 30.05.09?
But whenever we are changing price of the item in SA , stating the dates in past, the net price in SA is coming as zero. This zero price is also coming when we are taking the printout of SA from me9l. on Print out we want to see the price Rs 4.70 within the time frame .7.08-31.1.09
20. 12000087 Anchor Pin Front, 43103-397-6300 500,000 EA 0.00 1 EA B002 RILH
Pls lets know how we can I do it?
Thanks
Chandra

Dear
I hope you have grasped my problem.
I have maintained a price amendment ( price : Rs.7/-) in SA with a valid to date 31.12.99 , I am getting the price as Rs. 7 in both SA and in the print out of SA.
But when I am maintaining a price amendment ( price : Rs.7/-) in SA with a valid to date 31.01.09, I I am gettinf price as '0' , in item overview screen in SA as well as a '0" price on the print out.
I selected the item and went to the change info record, Condition. But the valid to date, Net Price, effective price are coming in grey.Thus I cant change Net price there.
Pls let me know how can I bring Rs7/- on print out and overview screen with a Valid to date in the past
Thanks
chandra

NET PRICE GETTING CHANGED

Dear Gurus,
                 I am having a problem here. We have prepared a purchase orderfor an item with quantity 2 and netprice 3000, with insurence 1000rs against that item. The tax part is as follows:
Excise Duty 10%
hcess 2%
Ecess 1%
I have ,maintained a condition type(item condition) for value (insurence) in the pricing procedure and it is trigerring as well. Here the requiremenet is that Excise duty must be calculated on net amount + insurence.,i.e if the purchase order net amount is 3000 rs then ED should be calculated on 3000*2(qty)=6000 + insurence amt 1000 which is 7000 Rs.
System is calculating Exicse duty on the exact amount which is 7000Rs but the net price of the po item is getting changed in item overview screen. It is getting updated to 3500, which is the average value of 7000 Rs.
So whenever we are taking the print out wrong net price is getting printed.
Can u suggest me a solution to getover this scenario?
Regards,
Edamanayil.

go to M/08
     tick the check statistics for ur insurance condition type...
        create a new po..
             click on update below the item details
                 and double click on B carry out new pricing..
now check ur net price

Actual price calculation

Hi Experts,
We have this scenario:
1. Activity prices are entered manually in KP26.(Activity type indicator=5)
2. At the time of CO11N only POWER activity will confirm.
3. Executing CPTA for overhead allocation.
4. KSS2 for power activity
5. No splitting for other cost elements
6. KSII Actual price calculation
7. MFN1 Revaluation of order
After revaluatin of order when i am checking actul cost for activities only power cost is coming.
Please find the enclosed print screens for same above process.
Please guide me how to get the actual price calculation for other activities.
KP26 :
KSS2:
KSII:
CO03:
Regards,
Vivaan

Hi Rajneesh,
Yes Splitting rule is Activity only.
Ex.
1.Order Quantity = 1000
2. I confirmed yeild 500 Qty & power activity 200 in CO11N.
3. Now when i execute CPTA for that order its calculating like below.
4. KSS2:
KSII:
Now actual price is coming same for other activities except power.
If i maintain no split structure that time in KSII only power actual price coming as print screens posted in original query posted.
Please advise me on Actuall price calculation as per our business scenario.
Regards,
Vivaan
Now my client is asking is as below
Cost center report xxxxxx
Water GL cost = 60000
Water Qautnity=1000(This is PO Total order quantity)
Water actual price=60000/1000 =60
Confirmed Quantity= 500
Actual price calculation for water = 500*60=30000
same for other activities also.
Please advise.
Regards,
Vivaan

Price Calculaion

Hi All
please tell me if i want the sale price of a material with certain profit on purchase price say purchase price 20 and the profit required 7% ( which is fixed on materials) then the sale price is 21.40 ( purchase price + profit = sale price) , so can i maintain it in condition record or i have to use any specific pricing procedure. please help me

Hi
In standard pricing procedure you can set the following:
1. Maintain standard condition PR00 with condition record.
2. Another condition type Z111 for profit with calculation type % (while defining condition type) and maintain condition record.
3. In pricing procedure, mark above condition as mandatory, unmark print and unmark manual (if necessary).
4. Create "subtotal" with heading as "Basic price" for above condition types and mark "print".
5. Maintain other condition types as per your requirement calculated on above said "Base price".
Result: Base price will be printed in paper and none of the conditions above said will not be printed in the printout.
Hope this will solve your problem.
Cheers,
RAJAN.

Help Choosing Laserjet Printer

I am looking to buy a printer but need help!
My main reasons for use would be to print (1) photos (2) word documents (3) scanning in a home office use.
The quality of the print is most important to me, the cost of cartridges providing quality Is good is not an issue nor is the price of the printer.
We have iPods and iPhones and an iMac and I would like to be able to send documents to the printer from all of these. We use satellite broadband.
I would like help from anyone who can suggest printers for me.
Thank you!!!

Are you looking for a commercial or consumer-ended printer? For a small business or office laserjet I'd suggest the LaserJet Pro M1217nfw. For a multifunction laserjet it should take care of all that you need done.
Here's a link to the home and home office page for it:
http://www.shopping.hp.com/webapp/shopping/product_detail.do?storeName=storefron ts&landing=printer&category=LaserJet&a1=HP+ePrint&v1=Yes&product_code=CE844A%23B GJ&catLevel=2
I'd reocmmend taking a look at the support sections and reviews to make sure it would suit your needs as well.
I work with HP

Cost of prints and photobooks?

Hi, I am trying to find information about ordering prints and photos through Iphoto. I would like to know the cost before I go to the trouble of creating a book. I have used Mypublisher in the past and have been very happy with it. However now that I am using Iphoto I thought it might be easier to ordering directly through that but I want to know if the costs are reasonable.
Thanks,

Hi ocean2boys,
Here is info for the books
http://www.apple.com/ilife/iphoto/books/prices.html
For prints
http://www.apple.com/ilife/iphoto/prints.html
Lori

How has the Sales Order Changed Prices ????

I created a Sales Order, manually entered the prices and Open - Printed.
All saved and updated.
However, customer has received wrong prices.
How do I check if another user has made changes?
Or have the prices defaulted to another price list called the (catalogue price list )
Edited by: Philip Eller on Jun 13, 2008 9:57 AM
Edited by: Philip Eller on Jun 27, 2008 9:53 AM*

Darpal,
Which Price field on the row of the Sales Order are you viewing? There is both Unit Price and Price After Discount. Unit Price editable, while Price After Discount is not. If you are only viewing Unit Price on the document, B1 may be changing the price in the Price After Discount field without you being able to see it.
B1 uses Price After Discount to calculate the final row total.
If the Print Layout points to Price After Discount, you'd see a different price than what is in the Unit Price field on the document inside B1.
The enhancement pack print layouts all point to the Price After Discount field, not Unit Price, out of the box. This quite possibly be your issue if you are using the layouts directly from SAP without alterations.**
Price After Discount will differ from Unit Price if there is any special pricing (i.e. Period and Volume Discounts or BP Special Pricing) or if a discount has been applied to the row n the Discount % column.
Are there any types of special pricing being used?
Confirm which database field the Price field is linked to on the print layout?
Regards,
Brad Windecker
Edited by: Rui Pereira on Jul 8, 2008 5:28 PM

Pull price from second price list

Hi Everyone
We have an issue where one customer wants the price from their pricelist and the price from the standard pricelist.
It's not the same discount on each item so I can't just create a pricing condition for the customer.
So what I was hoping to be able to do is run the Quote as normal using the customers pricelist in the final amount column.
Then on the smartform I was going to write some code to pull the price from our standard pricelist into its own column.
Problem is that I haven't been able to find the tables or how to get from pricelist to material price
Thanks in advance

Hi Jelena
I'm not an SD person so I may be using the wrong terminology or I could have misunderstood how this works
What I mean by price list is when you creating a quote if you go to the header details under the SALES tab there is a box PRICING AND STATISTICS with a drop down box for choosing a different price list. Or you can go to the ITEM DATA under the SALES B tab there is a drop down box for PRICE LIST for the item. Which I thought was where the document got the price for the materials (but I could have misunderstood).
Here we have an option of what we use for a standard price lets call it the US price list
Or we can select a price list for this specific customer lets call it C price list.
I want the document to use the C price list to determine the price for each material.
Normally we have some pricing conditions for a customer discount which we use like so using the standard price list US price list then apply the customer discount conditions to get the net price. Either that or discount can be set for the customer that is applied to everything at the same flat rate. Which I was told was the normal way to do things.
So the document has a unit price then applies whatever kind of discount to get the net price, which both print on the output to show the difference.
Now what we want since this customer buys so many different materials from us and the discounts is in a range from 0 to 20% (i think) for each material. We want to us the price list C in the document apply no flat rate discount and no pricing condition discounts. Then on the output we want to pull the net price from the document as normal. But on the output instead of pulling the unit price from the document (which would be the same as the net price) we want to pull the UNIT PRICE from the US price list. That way for this customer the user entering the quote will not have to add the correct discount % pricing conditions to each material on every quote.
So what I was wanting to do in the smartform was use the material number entered in the document to go get the price from the US price list but I'm having trouble finding the tables which I can do this in.
I hope that clears it up some

Price on PO print

Similar Messages

Maybe you are looking for