NET PRICE GETTING CHANGED

Dear Gurus,
I am having a problem here. We have prepared a purchase orderfor an item with quantity 2 and netprice 3000, with insurence 1000rs against that item. The tax part is as follows:
Excise Duty 10%
hcess 2%
Ecess 1%
I have ,maintained a condition type(item condition) for value (insurence) in the pricing procedure and it is trigerring as well. Here the requiremenet is that Excise duty must be calculated on net amount + insurence.,i.e if the purchase order net amount is 3000 rs then ED should be calculated on 3000*2(qty)=6000 + insurence amt 1000 which is 7000 Rs.
System is calculating Exicse duty on the exact amount which is 7000Rs but the net price of the po item is getting changed in item overview screen. It is getting updated to 3500, which is the average value of 7000 Rs.
So whenever we are taking the print out wrong net price is getting printed.
Can u suggest me a solution to getover this scenario?
Regards,
Edamanayil.

go to M/08
     tick the check statistics for ur insurance condition type...
        create a new po..
             click on update below the item details
                 and double click on B carry out new pricing..
now check ur net price

Similar Messages

Mass upload for info records when price gets changes

Dear All,
How to do Mass upload for info records when price gets change.
Regards,
Bhargav

Hi Bhargav,
Please upload the present price (Map) by LSMW . When you are doing the transactions then automatically by selecting option info update price will be updated the info record in Order Price history
Regards
M B Raju

PO unit price getting changed automatically

Hi Team,
In my case, the PO unit Price is getting changed automatically when pushed from a different system via Interface.
In PO of the 3rd party system, Order unit price & Order Unit are the same, but when pushed from the 3rd party system to SAP only Order Unit price is getting chaged.
When i tried creating a PO via FM in SAP, it gave the right one i.e. both Order Unit & Order Unit price are the same.
PIR looks good with teh required Unit price.
Please give me some tip to find the exact reason for change...
Thanks in advance.
Sravam

>
SAPMMSCM wrote:
>
>
> When i tried creating a PO via FM in SAP, it gave the right one i.e. both Order Unit & Order Unit price are the same.
> PIR looks good with teh required Unit price.
>
>
Hi,
If you are able to create the correct PO by executing the BAPI in SE37 and you are not able to do the same from external system, then the issue is the with the parameters only. Can you send the parameters that are being passed to the BAPI?
Just to make sure, send the parameters by using external debugging, not from the source system.
Regards,
Sukumaran.E

How the last net price gets updated in PO?

Hi All,
Wanted to know how the last price gets updated in the PO? So whenever one creates a PO after that for the same material, the system by itself suggest the previous PO price which was created for this material.
But its not happening this time? Can anyone tell me the reason for that?
Thanks,
Swati.

Dear Swathi ji,
Price will updated in PO two ways.
one way in through Info record and other way in contract
if you want update your price after creation PO do it one simple way see item details tab ->material data in that info update tab available.if you check this your po price automatically updated.
but one main reson is allways po price will pick first in contract then info record
hope this will helps you
Prem

Unit price getting changed

Hello All,
Scenario-1: Log into SRM --> Select Internal Goods/Services --> Select
a G.Code --> Enter the quantity as 15 and Price as 3128.98 per 100 and
then click on Check
Result: The price in the line item changes to 3129.00
Scenario-2: Log into SRM --> Select Internal Goods/Services --> Select
a G.Code --> Enter the quantity as 336 and Price as 415.64 per 100 and
then click on Check
Result: The price in the line item remains as 415.64
what could be reason for this inconsistency.
Regards,
Madhan

Hi
Can you send a screen of items in the sc with all details of total value net to business mail id for clear understanding?
what is the order unit for this material? are you facing some materials/or every material ?
regards
Muthu

Price getting changed in purchase order while clicking on delivery complete

Hi Frnds,
We are using SAP AFS , i have made a purchase order for one item which has 6 grids ( and all the six grids are having different prices ) . I am mainitainng the standard price in Info record ( ME11 ) and Grid wise prices in MEk1.
Now for that p.O i have received 95 % of the material and the Miro has also been done , now then vendor is not going to supply the remaining material , so i have to Delivery complete indicator and clicked on it , then the P.O price is automatically gettting changed . WHy is it happening so , and it happens only once , if i dont save and come back and try once again then its not changin

This is a bug in AFS System , sap has given us a note ,the problem has been solved
regards
rajesh

Change of Net Price in Sales Order

Hello Experts!
I wanted to know how the "Net Price" of a sales order can be "changed" by the system or "indirectly" by the user. I have an issue with the net price that changed in the sales order, and wanted to know how this could have happened; <b>besides</b> changing the pricing conditions, price adjustments, and order surcharge. Is there someway the system could have changed it or user "indirectly"? Please advise. Thank you in advance!
WC

Net price is not changed directly.
It's chanegd via changes to pricing only unless you have some code which updates this field AFTER SAP calculated it based on pricing conditions.
NOTE: if you reject line items it's vlaue is substracted form order net value, the same is true if any of your pricing conditions is made inactive due to various reasons.
Changes to pricing condiitons are not shown in order change history, you can see changes per condition record, but if any of your conditions in sales order was made inactive - you won't see it in change log. One of the options may be - if you generate any outputs (IDOCs) which send pricing info - you can check those IDOCs to determine when & what was changed in the pricing of your order.

PO Mass change for Net Price

Dear Experts,
Please help.
I want to change net price of POs, i tried to use MEMASSPO but there's no field for net price which is the one i want to change.
Kindly help and advise if there's another for PO net price mass change.
Thank you very much.
Zhie

Answer is in SAP note [501853|https://service.sap.com/sap/support/notes/501853] :
The ME_LIMIT_FIELDS_PO function module basically contains all non-changeable fields for the mass change of the purchase order. In addition, the following item fields cannot be changed with existing items:
Material number (EKPO-EMATN)
Material short text (EKPO-TXZ01)
Order quantity (EKPO-MENGE)
Order unit (EKPO-MEINS)
Net order price (EKPO-NETPR)
Purchase order price unit (EKPO-BPRME)
Plant (EKPO-WERKS)
As of R/3 SAP Release 4.6C, you can run the mass maintenance using the PurchaseOrder.Change method (BAPI_PO_CHANGE). For more information about this, read Note 545754.

Update Routine - Deaggegation - Net Price

Dear sdn's
For a object '0NETPRICE' , i am using the following update routine.
IF ( COMM_STRUCTURE-processkey =       '002' OR     COMM_STRUCTURE-processkey       =       '012' OR
COMM_STRUCTURE-processkey       =       '022')
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
Here GR Qty (31,969), GR Val (286,122.55) loading correctly. Net price getting aggreagted. In the folowing example i should get only 7.56 instead of 30.24. Inversion also problem, it will through only "0'.
Netprice    GR Qty    GR Val        Document Number
7.56          50,819-     454,830.05-     4500008362
7.56     66,886     598,629.70     4500008362
7.56     66,886-     598,629.70-     4500008362
7.56     82,788     740,952.60     4500008362
30.24     31,969     286,122.55
Can anybody suugest me the logic in routine ...?
Regards
Raju Saravanan

Hi,
( COMM_STRUCTURE-PROCESSKEY = '002' or
     COMM_STRUCTURE-PROCESSKEY = '012' or
     COMM_STRUCTURE-PROCESSKEY = '022' )
     AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
     AND COMM_STRUCTURE-CPQUAOU <> 0.
     perFORM QUANTITY_CONVERT
        USING    COMM_STRUCTURE-CPQUAOU
                 COMM_STRUCTURE-po_UNIT
                 COMM_STRUCTURE-base_uom
                 COMM_STRUCTURE-numerator
                 COMM_STRUCTURE-denomintr
        CHANGING RESULT.
if COMM_STRUCTURE-/BIC/ZPEINH ne 0.
RESULT = RESULT * COMM_STRUCTURE-/BIC/ZSTPRS1.
RESULT = RESULT / COMM_STRUCTURE-/BIC/ZPEINH.
else.
RESULT = 0.
Endif.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
else.
   RETURNCODE = 4.
endif.
result value of the routine
RESULT = .
result value of the unit
UNIT = COMM_STRUCTURE-CURRENCY.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
the above code using.....please suggest

Net price in Inforecord

I am trying to change the net price in inforecord. Currently it says 0.00 usd. The condition PB00 is maintained.
Even if i change the value to 300usd in PB00, still my net price field says 0 in inforecord.
Why is the net price not changing, even after i change the PB00 condition type in info record? Any suggestions.
Sylvia

see explanation in OSS note 685117 - Net Price in Info Record or Contract is wrong
and 392988 - Consulting: Prices in info record and RM06INP0
you have to run report RM06INP0 for Info Records

Net Price/Net Value on Sales Order Overview Incorrect

Hi Experts!
We are on SAP 4.7
I have a sales order that has already been delivered, billed, etc. However, when I look in the Sales Order Overview screen, for 1 item, the Net Price is different than the Item Pricing Condition screen. I looked in document changes and did see when the Net Price was changed, but cannot tell why it was changed. Can you anyone explain why this happened? This is causing a minimum order surcharge in the order. Awaiting a quick response. Thank you in advance!
WC

Thank you for the response!
I have tried to replicate the scenario, that was causing the net price/net value displaying incorrectly, and thus causing a minimum order surcharge fee; which was really the issue.
When I re-created the scenario, I found that a change in quantity in the sales order of an item or items, after the delivery has already been created (before posting GI); it caused the net price/net value to change, thus causing the minimum order surcharge.
The person changed the quantity in sales order, and it indirectly changed the net price, causing the minimum order surcharge. I still do not know why this happened?
Do you know of any reasons why this may have occured?
Thank you in advance!
WC

Net Price Issue

Hi all,
I am extracting data from 2LIS_02_SCL into Cube. When I checked the extractor in RSA3 I noticed Net Price getting different values.
The Net Price is coming from EKPO. As we know that in the data source it will show per unit price ie. Net Price / Price Unit. For eg if I have Net Price as 50.40 and Price Unit as 1,000 in table, in the data source I get 0.05 which is correct as per my funcitonal person. But if we have Net Price as 0.82 and Price Unit as 1,000 I am getting 0.00 instead of 0.00082. It is not showing the remaiming decimal places. And also I am using standard field.
Can any one tell me how to bring the remaining decimal places also.
Thanks in advance
regards,
mahi

Hi Bobs,
I know we can increase the decimal places in BW side. But what I want to know is why in the data source only two decimal places are showing up.
for eg. In EKPO Net Price = 0.82 and Price Unit = 1,000.
In the data source Net Price = 0.00 where it should be 0.00082 because it is calculating per Unit Price.
I hope now you understood my problem.
Anyways thanks for your answer.
Let me know if any suggestions.

Change the Scheduling agreement net price through BAPI_SAG_CREATE

Hi all
I want to change the item net price of Purchasing scheduling agreement through bapi BAPI_SAG_CHANGE.I passed the item no ,and the net_price in the table parameters Item, Itemx and i passed the item no , condition record no , condition type ,condition value in the following table parameters Item_condition.Item_conditionx.I passed the validity periods in the Item_cond_validity Para meter.
Once i run the bapi i got the below 3 messages
1.Instance of the object type Purchase SchedAgreement has been changed.
2. Scheduling Agreement changed
3.Change NETPR could not be effected.
The net price change are not effected.
So, what are the mandatory parameters and data i need to pass
to change the net price?
Regards,
Kranthi

Hello Kranthi,
How did you solve this? I am trying to do the same but I get the same message as you do.
Thanks in advance!
Kind regards,
Jamiros

Vendor code in Purchase order changed after invoice,net price showing zero.

Dear Experts ,
In one purchase order , user had done GR & invoice for a line item ( service ),item category "D" , and
thereafter somehow the system allowed user to change the vendor code. The PO line is now having amounts in
the sub-service line items , but net price for the line item is showing as zero. Since the PO was made
directly without any contract/RFQ/PR , there is no reference document or info record shown against the line
item.
In the conditions tab of Item details,the condition for basic price is not seen & since there are no amounts
applicable for the other conditions such as insurance , octroi etc., the NET price shown for the item is
Zero, which is also getting printed in the PO as zero , which is not acceptable , as we can not send to the
vendor PO copy having prices for individual services printed correctly but the total gross price showing
zero.
Pl advise what can be done so that Net Price is shown correctly & not zero.

I think the new vendor is having a different pricing schema than the old vendor. Check the pricing schema for the old vendor (in purchasing view in field 'Schema Group. vendor) and compare it to the new vendor. I think they're different.
If it is then what i think happening is the user already input the price for the condition type in pricing schema A, then the vendor is changed and the new pricing schema is kiciking in thus making the old condition type missing.
Try to either:
A. Change to the old vendor back,
B. Change the pricing schema of the new vendor to be the same with old vendor

Recreating duty calculations for PO for changed Net price of an item.

Dear Friends,
i am trying to simulate the duty values for a PO by calling the FM's in the below said order.
it is working fine, when i am simply passing the actual value of the item via structure (gfl_komp) shown below.
My requirement is like, i want to change the net price in the item structure (gfl_komp) and recalculate based on the changed Net Price. But when i change the Net value, it is not getting reflected in the simulated value of FM 'Pricing_screen'.
Is there anything i should pass to the header structure (gfl_komk). Please help me out.
   CALL FUNCTION 'ME_FILL_KOMK_PO'
          EXPORTING
            i_ekko          = gfl_ekko
            i_ekpo          = gfl_ekpo_pass
           i_lfa1          = gfl_lfa1
            i_t001          = gfl_t001
           i_kalsm         = gfl_ekko-kalsm
           i_kappl         = 'M'
     I_EGIMP         = I_EGIMP
     I_LFM1          = I_LFM1
     I_T001W         = I_T001W
     I_TRTYP         = I_TRTYP
     I_WEDATEN       = I_WEDATEN
     I_KVORG         = I_KVORG
         IMPORTING
           e_komk          = gfl_komk
        CALL FUNCTION 'ME_FILL_KOMP_PO'
          EXPORTING
            i_ekpo                     = gfl_ekpo_pass
            i_t001w                    = gfl_t001w
            i_ekko                     = gfl_ekko
            i_komk                     = gfl_komk
       I_MT06E                    = I_MT06E
       I_EINE                     = I_EINE
       I_EINA                     = I_EINA
       I_PREISFINDUNGSMENGE       = I_PREISFINDUNGSMENGE
       I_UEBPO                    = I_UEBPO
         IMPORTING
           e_komp                     = gfl_komp
Here i am trying to change the values of the actual PO values in gfl_komk and gfl_komp.
        CALL FUNCTION 'PRICING_SCREEN'
          EXPORTING
            comm_head_i            = gfl_komk
            comm_item_i            = gfl_komp
COMM_TEXT              = ''
DISPLAY_ONLY           = ''
MATERIAL_TEXT          = ''
TRTYP_I                = 'A'
FPTYP_I                = ''
CTRL_NO_DISPLAY        = CTRL_NO_DISPLAY
REQUEST_POS1           = '-'
REQUEST_POSM           = '-'
REQUEST_POSP           = '-'
REQUEST_POSL           = '-'
IMPORTING
COMM_HEAD_E            = COMM_HEAD_E
COMM_ITEM_E            = COMM_ITEM_E
CALCULATION_TYPE       = CALCULATION_TYPE
FCODE_E                = FCODE_E
          TABLES
            tkomv                  = git_tkomv
SVBAP                  = SVBAP
CHANGING
C_VFKOMV               = C_VFKOMV
    ENDCASE.
ENDIF.
Regards,
Sandeep Sivan
Edited by: sandeep sivan on Apr 13, 2010 11:32 AM
Edited by: sandeep sivan on Apr 13, 2010 11:32 AM
Edited by: sandeep sivan on Apr 13, 2010 11:37 AM
Edited by: sandeep sivan on Apr 13, 2010 11:47 AM

hi sirnivas..
Thanq you for the points..these are the first i ever recieved..
if you are working on peice of code which can get the price history do me a favour if you have finished the code just explain it to me who did u do that...
i have been working on an object from last two weeks to get the latest price...
the thing is even though the price for condition items has been changed it wont get updated in the Sales orders unless new pricing fot the document is done...
so i have to get all the sales orders who condition items price has been changed and display them in an ALV...so if you can get the exact old values...for the conditions i guess the opposite also can be done.....
Here i have suggestion for you...in condition items there is a process called SCHEMA ( pricing Schema) which you can see using Condition Analysis button at the bottom of the condition item window...
you can see all the price changes to the condition when you parse the tree structure of the procedure..EXAMPLE :- R0000 etc...
so some Sales orders if the Schema has been changed all the existing condition are replaced by New ones from the changed Schema...so i guess that would play an important role in deciding the Price of Sales order...
I know this is bit long but .....if you did finsish your program do let me know how you did it...
Thankyou very much and good luck.

NET PRICE GETTING CHANGED

Similar Messages

Maybe you are looking for