Pricing Conditions and how the pricing date is determined

Hi all,
Small question, i ahve some pricing conditions that use the Serives Rendered date and others that use the Pricing Date from an order, how is the condition decided on what date it uses?
Hope i have expplained this ok, if not and you need more info let me know.
Regards
Steve

Hi
There is a difference between Service Rendered Data and Pricing Date.
Normally Freight Conditions are maintained on Service Rendered Date so the freight will be picked on the basis of date on which the Actual Delivery done, whereas Pricing date is used for other conditions so that price will be based on the date on which the document created and the Pricing Date maintained in that.
In the same way there is a Billing Date which came in Invoice so price will be based on the date of Invoicing.
If you maintain the record in VK11 and test a cycle you will be able to find the difference easily.
Regards
Amitesh

Similar Messages

How to get the pricing hierarchy based on the delivery date for sales order

Hi,
How to get the pricing hierarchy based on the delivery date for sales order other than system date.
My requirement is to get the Pricing hierarchy based on the delivery date other than system date.
Waiting for kind response.
Best Regards,
BDP

HI Sai,
please refer teh document already how to write FM based extration on generic extractors.
and here the logic to find the latest records values:-
-> get the data in an internal table
->Sort the internal table data based from date descending
-> Using READ statement , we can read the first record of the table which is nothign but your latest record.
Regards.
Sakthi

Determining pricing condition currency according to billing date

Hi All;
Although this is a so simple scenario, i couldn't get any succesful reply in the forum.
Let me explain this by an example:
Sales Order TA
Material X = 10 EUR (Pricing Currency is EUR)
Pricing date: 23.10.2009 (1 EUR= 2 USD)
Document Currency:USD
Billing Document F2:
Billing date: 25.10.2009 (1 EUR=3 USD )
i want to calculate pricing condition currency according to billing date.
Total Price must be : 10X3=30 USD and of course pricing date must be: 23.10.2009
how could we achieve this?
before your reply, please consider my advices:
1.i don't want use pricing type "B" in VTFL. "G" is a preferable one.
2.in my VTFL configuration Pricing Exchange Rate Type is "C Exchange rate determination according to billing date"
3..OSS Note 92613 serves a simple solution. But i couldn't apply this note. I changed my routine according to this note, but it has no effect. Is there anyone who used this note succesfully?
4.someone said that it is possible to achieve this scenario by using some user exits, if this is correct, could you please say user exit's name?
thanks Gurus..
Edited by: streptomagma1 on Oct 26, 2009 8:43 AM

Pricing date: 23.10.2009 (1 EUR= 2 USD)
Billing date: 25.10.2009 (1 EUR=3 USD )
Do you mean to say that on ob08, different exchange rates were maintained on 23-10-09 and 25-10-09 ??
thanks
G. Lakshmipathi

Pricing condition in Billing document (Pricing Date)

Hi Gurus,
I have a sales order which is created on 10.01.2012, the pricing date in the sales order is the same (10.01.2012). The Delivery was created on 22.02.2012 and Actual GI date is also 22.02.2012.
Now when I am creating the billing document, the pricing condition value is showing as '0'. I checked the pricing analysis and found that the validity of the base price condition Z001 was from 10.01.2012 till 14.01.2012 in the sales order.
As the Actual Goods Issue date is taking as the 'Billing date' as well as 'Pricing Date' , the system is not able to find a valid condition type as on 22.02.2012 (GI date). The pricing type in copying control of Delivery to Billing is 'C - Copy manual pricing elements and redetermine the others'.
So I would like to know your opinion on the following.
1) Can I create the billing document using VF01, manually change the pricing date as 10.01.2012 and do the price update using rule C? Will it fetch the price based on the pricing date?
OR
2) Maintain the condition type Z001 for the GI date and do the billing?
Please let me know which is the best way to adopt?
Regards,
SAM

Hello,
If you have necessary authorization to change the Pricing Date in Invoice, please go ahead.
Change the Pricing date in Invoice, go to Conditions tab & update the Pricing. System will fetch Condition Records as on that date.
Hope this helps,
Thanks,
Jignesh Mehta

In cursor i have two queries where put the condition and how to print the d

hi i have 2 tables 1 is emp(empid,empname,dept,grade)
2 is salary(grade,salary)
in cursor when ever grade is increased salary automatically increased
in 2 diffrent queries where i will put the if condition and how to print the output.
any one can please suggest me.
finally my required out put is
empid,empname,grade,salary
thanks

It is always helpful to provide the following:
1. Oracle version (SELECT * FROM V$VERSION)
2. Sample data in the form of CREATE / INSERT statements.
3. Expected output
4. Explanation of expected output (A.K.A. "business logic")
5. Use \ tags for #2 and #3. See FAQ (Link on top right side) for details.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

How the pricing will be carried out in intercompany billing

hi ginius
my question is how the system will carry out pricing.
2) how many pricing procedure should we maintain
3) how customer will get price how the invoice will goes
4) what are the configuration settings for intercompany biilling
thanks in adavance

Dear nag nageshwar,
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

Pricing routine 901 in the pricing procedure

Can you tell me in detail (step by step) How to write pricing routine 901 in the pricing procedure?
I know ABAP coding. I am new to SD (pricing).
The only thing I know is the VOFM 901 Pricing Routine development is in ABAP program RV64A901.
Purpose : Pricing Routine for calculating the price difference due to increase or decrease in the copal contract price from the copal actual price
Description :
Routine 901 : Copal Difference Calculation
The formula to be used is : Copal Adjustment = ( Copal Contract Price + Copal Actual Price ) x Amount of Copal / 1000
Where
Copal Contract price is the condition type Y001 from the pricing procedure Z00003.
Copal Actual price is the condition type Y002 from the pricing procedure Z00003.
Amount of Copal is the condition type Y005 from the pricing procedure Z00003.
Copal Adjustment is the condition type Y003 from the pricing procedure Z00003.

Hi,
Go to the transaction VOFM.
In the menu..Choose...Formulas -> Condition value
At the of the table ..Enter 901 and give the description..
Then select that row and press source text button or F5.
It will ask for the access key...
Get the access key for the corresponding object
R3TR PROG RV64A901
Then in the code..
READ TABLE XKOMV INTO LWA_Y001 WITH KEY KSCHL = 'Y001'
                                                  KPOSN = KOMP-POSNR.
READ TABLE XKOMV INTO LWA_Y002 WITH KEY KSCHL = 'Y002'
                                                  KPOSN = KOMP-POSNR.
READ TABLE XKOMV INTO LWA_Y005 WITH KEY KSCHL = 'Y005'
                                                  KPOSN = KOMP-POSNR.
Sum up the values in LWA_Y001, LWA_Y002 & LWA_Y005
And then move it to XKWERT
Thanks,
Naren

Date fields and compare and get the later date of the fields

I am trying to compare these date fields and compare and get the later date of the fields
Tables are
TABCASER
TABCASER1
EVCASERS
Field
Are
TABCASER1.CASER_no
The dates are to be compared and then get the records with the highest or latest date value.
TABCASER1.CASERRECIEVEDDATE
EVCASERS.FINALEVDATES
EVCASERS.PUBLICATIONDATE
EVCASERS.PUBLICATIONDATE
TABCASER.COMPAREACCEPDATE
I have this code but I am trying to figure out what it all means.
I have several questions.
1.
1.     greatest it is used here to compare right? How do I then output this ? do I store it to a var (coldfusion) ultimately , I wish to send it to a page of records
2.     is it necessary to use todate? And to_date? What does this do?
3.     decode, is this necessary too. What does this do? NULL?
4.
5.
6.     when I do get the query results how do I send it to coldsuion and out put to a display.
Someone sent me this code.
is there abetter way of doing this? To compare the dates and store in a var to display. thanks
Here is my code below:
Greatest(
     CASE
          WHEN INSTR(TABCASER1.CASER_no,'-CE') > 0 THEN
     decode(TABCASER1.CASERRECIEVEDDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER1.CASERRECIEVEDDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-ERNIE') > 0 THEN
     decode(EVCASERS.FINALEVDATES,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.FINALEVDATES)
                         WHEN INSTR(TABCASER1.CASER_no,'-MONIE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-NADINE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         ELSE
     decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE)
                    END
          ,decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE))
          between TO_DATE('#dateformat(form.startDate,"mm/dd/yyyy")#','MM/DD/YYYY') and TO_DATE('#dateformat(form.endDate,"mm/dd/yyyy")#','MM/DD/YYYY')
is there abetter way of doing this? To compare the dates and store in a var to display. thanks

Hi
If you have date datatypes than:
select
greatest(TABCASER1.CASERRECIEVEDDATE, EVCASERS.FINALEVDATES, EVCASERS.PUBLICATIONDATE, EVCASERS.PUBLICATIONDATE, TABCASER.COMPAREACCEPDATE)
from TABCASER, TABCASER1, EVCASERS
where ...-- join and other conditions
1. greatest is good enough
2. to_date creates date dataype from string with the format of format string ('mm/dd/yyyy')
3. decode(a, b, c, d) is a function: if a = b than return c else d. NULL means that there is no data in the cell of the table.
6. to format the date for display use to_char function with format modell as in the to_date function.
Ott Karesz
http://www.trendo-kft.hu

Creating remote objects and passing the retrieved data to modules

I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to interfaces that modules from the main application could use?
I could put the RemoteService/RemoteObject in the modules, but (in my opinion- and I could be wrong) the best design seems to be using the remote calls in the main app and passing the data along to the modules.
Ultimately, I would like to know what the "best practices" are for creating remote objects and passing the retrieved data to modules
Thanks!

public void mouseClicked(MouseEvent e) {
X x = new X(e.getX(), e.getY());
}I don't see the difficulty.

Need to understand how the PGI date is being calculated

Hi,
Need to understand how the PGI date is being calculated.
Does the PGI date get recalculated if the cusotme delivery date is changed.
Thanks,
Raki

Hi,
Thanks for the information and please let us know is there any calculation logic exist for that?
I have changed delivery date in the sales order and based on that-
- Transportation planning/material availability/loading/schedule line and confirmed quantity date was chaged.
Is this the - GI date - Transist time= PGI?
Thanks,

How the CRM data is transferred (initial load) to TREX server in CRM EHP1

Hi Guru's
I am working on HV segmentation first time and would like to know, how the CRM data is transferred (initial load) to TREX server in CRM EHP1, if we create the 'Data source for HV - Attribute set / Inforset' will that transfer the data to TREX server or do we need to perform Initial load by execute by batch program / Transaction.
For the update (delta load) is the program : CRM_MKTTG_TREX_UPDATE to update the BP data, can we also add other objects (Transactional data) for delta load.
Regards,
Ajay Kumar

Hi Ajay,
Yes you are right the Report CRM_MKTTG_TREX_UPDATE is used for Full load (inital load) for HV segmentation data.
Both Full and Delta load is suggested to be performed in background. You can use the options "Business partners" and "Marketing permissions". For BP's you can use Delta upload with further options:
Synchonize Business Partners Beforehand
Force Update
Offset for Delta Table Entries (in sec.)
You can also "Define Delta Source Objects for High Volume Segmentation" in SPRO > MKT > HV segmentation.
Here you can set relevant data source objects that is available for delta upload.
For more details refer to documentation next to the customization entry.
Hope this information helps you.
Regards,
Anup

We have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.

we have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.
Rajiv Kumar

Hi,
More details about your discussions forum will make others easier to find a corresponding solution on your requirement.
If you mean there are three Discussion Board list waiting for synchronizing, I would suggest you create an Event Receiver for the three Discussion Board list.
Here is a link with code demo about how to copy items from one Discussion Board to another including Replies:
http://spcodes.blogspot.com/2013/03/programmatically-copy-items-from-one.html
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

How the master data of multi language is shared in the info cubes

hi frindz,
how the master data of multi language is shared in the info cubes
bye bye
venkata ramana reddy.G

Hi Ventak,
In the infocube you have the key. Then you have a text master data table that has as key (for the table) the key of the value (the one in the cube) and the language, and the text in that language as another field (short, med, long).
Hope this helps.
Regards,
Diego

Pricing Conditions and how the pricing date is determined

Similar Messages

Maybe you are looking for