Primavers Unifier File Transfer Utility - Seup error

Dear All,
Pertaining to the mentioned subject, I have problem setup the Advanced File Transfer Tool.
Simply after I finish setup I have "Weblogic" stopped working.
Please help

Doubtful code:
size = bis.available();
if(size == 0)
break;
You have a buffered input stream hanging on a socket input stream. So what if the client gets ahead of the server? Answer: for a while, there is no data available.

Similar Messages

TFTP 'configuration update' from 5508 WLC fails stating reason as '%Error: Config file transfer failed – Unknown error –refer to log'

Dear Experts,
I have two WLCs and other management devices as part of same subnet. I am able to upload ‘configs’ from all the devices on to my TFTP server. However when I am attempting to do the same from one of my WLC, it is failing consistently stating error message as:
‘%Error: Config file transfer failed – Unknown error –refer to log
Has anyone else too faced the same issue and how would we overcome this? Any specific debug that could help get more details on it?
Though the error message says, refer to log but still I don’t see anything that gets reflected in ‘Monitor logs’ which is related to ‘configuration file’ upload failure.
WLC code: 7.4.100.0
PFA as the error snippet.
Thanks and Regards,
Adnan

Hi Kaneswaran,
Just a soft reboot helped me solved the problem :). Still I am on 7.4 and facing no issues after this.
Apologies for coming too late to respond. Getting a down time window was not that easy and so was much delayed to try soft reload. I am still on 7.4 and facing no issue.
Glad that in your case it starting working all of a sudden. Could you please verify from 'show tech-support' to confirm if by chance your WLC had undergone any crash that could have caused the WLC to reload and thus accidently fixing the issue :)
Best Regards,
Muhammed Adnan

The file transfer failed internal error

Hi,
I've just transferred 10 MP3's to a Nokia 5800 and then when it came to the 11th file I got the message " The File Transfer Failed : Internal Error".
I originally thought that the Nokia had no more space so I deleted lots of files but the error still happens.
What's the problem here? Anyone any ideas?

The only files you can transfer are address book cards. I'm not positive that it will work for your phone but you could try. Download the program Bitpim. You will be able to transfer photos, ringtones, and other cool things from phone to computer and computer to phone. Let me know if you can get it to work.
-Audrey

Error Message File transfer failed Internal Error

I have a Motorola Pebl U6 mobile phone I have paired it with my MAC. My MAC recognizes the phone it is in the list of devices. It did fine with syncing my adress book and contacts it transfered all the files to my phone no problems, however i am using bluetooth file transfer to transfer itune files to my phone and It is not working i keep getting the error message.

Welcome to Apple Discussions!
Since bluetooth file sharing with a phone is a form of networking, I think it better if you ask the question here since your profile also says you are running Tiger (10.4.10):
http://discussions.apple.com/forum.jspa?forumID=755
Where you posted is a constructive feedback board for Discussions itself, and not a place for technical questions about your Mac. If you are not running 10.4.10 on the Mac you are attempting to network via Bluetooth, please state which operating system you are running, and we'll direct you to the right place.

Crash immediately after file transfer utility - MB now a brick

I just finished a 2 hour transfer of data from an old MacBook to the new MacBook and it crashed just as there was less than a minute to go. The screen went haywire, then nothing but a beeping chunk of aluminum brick.
Any solutions to this problem short of returning it?

Details might help people here.
How did you do the transfer?
What was happening just prior to crash?
Can you try another hard drive in the MacBook?
Did you just clone the older MacBook's OS X installation? (If so, it won't work. The new ones have different drivers and won't boot up with the old MacBook's OS X build.)
Good luck.

AS400 emulation from nylync using ETU file transfer utility.

No native OSX version available. It should work in OS 9 (Classic) environment, but you have to make sure that OS9 is set to use TCP in the control panel. My problem is, I cannot boot into OS9 with the new Mac and 10.4.4 to make OS9 use TCP in the network preferences. So anyone have any suggestions on how to get OS9 in classic environment configured to use TCP?

Hi SuperSizeIt;
Will the fact that OS 9 is going away carry any weight with your IT department? If it doesn't, you will probably be locked into your current hardware and software forever.
The guys I spoke to have never heard of the software you are using. One guy did say he thought he had heard about it but is was so long ago he could just barely remember it. He also said that he thought one of the reasons everyone has dropped it was because it wasn't very good as 5240 emulators go.
Allan

File Transfer error - stops at 26280 bytes.

I am trying to make a little file transfer utility, and it works when I test the client and server sides on the same machine, but when I began to test the client and server on different machines it starts giving me problems. For files under 26280 bytes the file transfers completely, no problems. But for anything over that amount, the server stops the transfer and returns a bunch of errors on the server side. The client thinks the file is complete and quits. I am pretty sure it has something to do with the way I have set up the Streams. Here is the code snippit:
For Server:
OutputStream os = socket.getOutputStream();
BufferedOutputStream bos = new BufferedOutputStream(os);
File nFile = filename;
long long_size = nFile.length();
int size = (int)long_size;
byte[] buffer = new byte[size];
FileInputStream fis = new FileInputStream(nFile);
DataInputStream dis = new DataInputStream(inStream);
while(fis.read(buffer)!=-1){
bos.write(buffer);
bos.flush();
For Client:
InputStream is = sock.getInputStream();
BufferedInputStream bis = new BufferedInputStream(is);
FileOutputStream fos = new FileOutputStream(file);
BufferedOutputStream bosfile = new BufferedOutputStream(fos);
while(true) {
size = bis.available();
if(size == 0)
break;
byte[] pOutput2 = new byte[size];
rc=bis.read(pOutput2, 0, size);
if(rc == -1)
break;
bosfile.write(pOutput2);
if(rc < size)
count +=rc;
break;
else
count +=size;
Any help would be much appreciated. Thank you very much

Doubtful code:
size = bis.available();
if(size == 0)
break;
You have a buffered input stream hanging on a socket input stream. So what if the client gets ahead of the server? Answer: for a while, there is no data available.

PDF/HTML Reader and file transfer.

Hi,
I would like to view my PDF documents and backedup webpages (solaris docs and java tuts) on my iphone.
The problem is that I see apps for viewing pdfs and apps for transferring files to the iphone but none that incorporate both (I can't use WiFi). ie. I can use the file transfer utility to transfer my pdfs to the iphone but the app that reads the pdf cannot access the location where the file transfer utility saves the files.
Please HELP!

Hi,
also how can i generate it into xls there is no xls in output format drop down.For Excel output format, please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=Excel+Concurrent+Output&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone

On Mac - Android File Transfer stopped working.   It says Unable to connect after installing the Verizon Software Update Utility from phone.

    Hi JoeC695,
That's not good! We want your software to work properly. Have you tried uninstalling the Verizon Software Utility from your MAC? Do you receive a specific error message?
Thanks,
PamelaF_VZW
Tweet us vzwsupport

File transfer problem: error -37

I'd like to copy the content of my old mac's (PPC G4 tower running OS 9.2.2) HD (which holds some 85GB of data in about 73,000 files) to a partition on my mini's HD (early 2009 model, running OS X 10.5.6). The machines are connected via ethernet (crossed cable, no 'real' network) and tcp/ip file sharing. Data transfer is done from the G4's side (the 145GB target partition on the mini is configured with read/write privileges for "everyone"). After about 95% completion (about 4GB/2,500 files remaining) of the data transfer, an error message appears ("Cannot copy file xyz because error -37 has occured") and the transfer is aborted even if I click "Continue" on the message box.
According to Apple's documentation, (MacOS 9) error -37 means the file name is longer than 31 characters, which I've made sure is not the case. Funnily, after the offending file has been deleted from the source HD and the transfer restarted, at about the same point (again about 4GB/2,500 remaining to be transferred), the error message pops up again, this time with a different file (or directory) name as the culprit.
This happens no matter whether the target partition is formatted as HFS+ oder HFS+ journaled. The source partition is formatted as HFS+. Also, the same problem also occurs when the transfer is started on the mini instead of the G4.
What am I doing wrong? Any help is greatly appreciated!

You may want to repair the hard drives on both machines, just in case the problem is something other than what is actually being reported. Also, what I have done when having odd copy problems with such large batches of files is to copy them in smaller batches. When you run into a problem, break up whatever batch you were copying into smaller batches. Keep going until you've narrowed it down to the specific files that are giving you trouble.
Alternately, you could find some kind of file copy utility to do the job for you. I don't have any recommendations, as I have never used something like that. Look for something that will log errors without halting with a cryptic error.

"Windows - No Disk" error message on file transfer

Hello!
I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
IR1. Now, when initiating File Transfer operation with any workstation, up
comes this error message:
"Windows - No Disk"
"Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
[Cancel] [Try Again] [Continue]
If I click "Continue" 4 times, file transfer starts up successfully.
Any ideas about how to get rid of this annoying message?
Toomas Aas

Toomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote Execute and File Transfer Error

Whenever we try to do a Remote Execute of File Transfer, we get an 1899
error. Here's the strange thing, we can RE and FT to desktops that are
still running the ZfD 4.x client. Seems to be only happening on the latest
(ZfD 6.5sp2). Any ideas? Also, remote control and remote view still work
w/o problem.

Blewis,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error no. 4 in SAPGUI during graphic call or file transfer.

Hi,
In the landscape there are still 46b sap version, i have some functional queries that when i executes go to the sap graphic screen and it throws with no output. I understand that that it works in ECC version but not for 46b.
This issue is related to SAPGUI, as i have the latest sapgui installed 710 that works well for ECC.
But if i input the parameter in sap 46b system , and execute to get the graphic chart i get this:
The Generation of Graphs for Stock Movements in the MC49 Transaction.
When you call a hierarchy graphic, the following error messages are displayed
1. 'Too much data in a table or too many tables defined
2. E4: error writing to XC pipe: child #1 ( id: STAT ); reclen12
3. Error no. 4 in SAPGUI during graphic call or file transfer.
I have also look in to note 316232, 361222, 96885. for this but this says to upgrade the sapgui,which is already in.
What is the solution for this.
Regards,
Chetan.

Take a look at this thread. This may provide you some guidance as it appears that Error has been encountered before.
[Link Here|Error no. 4 in SAPGUI with Graphics call or file transfer;
Regards,
Zecher

Getting error in file transfer from one system to another system

Hi All
One of my client (User) wants to transfer his file from SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the program he is getting error "File Transfer Failed due to Network chk with Admin"
I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Please help me to resolve this problem. I any detail require I will provide the same.

Guruprasad Wrote:
He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
Regards,
Raghu

File Transfer Error Between Ichat 2.1 and Ichat 3

I am trying to send my brother some files. He has an Ibook G4 and so do I. He is running Ichat 3 on Tiger and I am running Ichat 2.1. Both of us are using a wireless connection through our own personal cable modems. He can send me files and I can accept them and get them without problems. Every time I try to send him a file, before it starts, we get an error 'File Transfer Error' file name not transferred.
He says he has no problems receiving files from other buddies of all different types of operating systems.
I don't recall having any problems sending or receiving from any of my other buddies either.
Is this just an OS X.3 vs OS X.4 issue? Or is there something weird with my Ibook?
Has anyone else had this problem? Thanks,
-Chris
IBook G4 1 Ghz Mac OS X (10.3.9) 640 MB RAM

Hi cjmagnuss,
Can your brother send files to other people.
It sounds like it might be his end.
File Transfers happen on Port 5190 on the UDP protocol.
Some modems and router have problems if they have to list Protocols when Port Forwading.
Is this the case for him ?
10:00 AM Tuesday; February 21, 2006
iChat Resouce Web pages

Primavers Unifier File Transfer Utility - Seup error

Similar Messages

Maybe you are looking for