Prime 13 changing Hostname on Server

We have a Prime 1.3 installed currently with a diffrenet hostname on the Redhat server.
Was wondering if we can change the hostname on the box, without having to re-install the application.
TIA,
Biren

Hi Biren:
Something very peculiar appears to have happened, as the setup script run at initial install only asks for one name and uses it for everything. You can certainly try
config t
hostname newname
end
write mem
then "ncs stop" and "reload", and see if that syncs everything back. In some instances, the /etc/hosts file or the Oracle names files have had to be manipulated manually, but you'd probably want to have a TAC engineer do that.
If you don't have the new Update-1 patch for Prime Infrastructure 1.3.0.20 installed (filename PI_1.3.0.20_Update_1-12.tar.gz) installed, I'd suggest you get it. While it's not going to specifically address this issue, there are a lot of really good fixes in it.
Release Notes for Update 1 for Cisco Prime Infrastructure 1.3.0.20

Similar Messages

Change hostname of MaxDB server.

Dear All,
I want to change hostname of MaxDB server.
For the Oracle, some parameter should be changed. (ex.listener file).
What about MaxDB?
Regards,
Kim

Hi,
this link may help you...
[Hostname change on R/3 hosts running SAP DB or MaxDB.|Hostname change on R/3 hosts running SAP DB or MaxDB.]
AND
[http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Regards.
Rajesh Narkhede

How to repair Open Directory Master after Changing Hostname

Summary:
How to repair Open Directory after Changing your Server's Hostname (see separate post)
Problem:
I had to change our server's hostname from a private hostname (server.name.private) to a public hostname (name.dyndns.org).
Procedure:
1. Precautions:
Since I was anticipating major dramas I tested the change of hostname on a clone ( I used Super Duper, and I very strongly advise everybody to heed this warning because a change of hostname will corrupt your server services, in particular Open Directory)
Second, I exported the network users from Server Admin and copied the archive to the Drop Folder of the server's local account (because the network accounts will be unavailable after demoting the OD Master.)
2. Change hostname and demote OD Master
a) I re-booted the server from the clone
b) I changed the hostname in Server App and I noticed that the Open Directory Password and the Kerberos database were still stuck with the old hostname.
c) I then demoted to a standalone directory (Server Admin) and I tried to promote the server to an OD Master using the Server App (Manage Network Accounts). Server App always returned an error saying I should check my network settings.
3. List of 'fixes'
I tried the following fixes to no avail (which does not mean that you can skip them)
a) I checked the DNS entries, forward and reverse were working fine (sudo checkip -changehostname)
b) Checked with Lookup in Network Utility, all was fine
c) I deleted all system certificates (Keychain) which showed the name of the previous hostname
( N.B. you need not delete email certificate and private/public keys)
d) I tried to assign a new static IP in Networking Preferences (had no visible result)
e) I re-booted from the working drive and I re-paired permissions on the clone; I ran disk repairs.
Despite all this I could not re-create an OD Master.
I then looked for this dubious folder /var/root/Library/Application Support/Certificate Authority.
I could not find this folder when using the Finder's Go To Folder, nor did "Easy Find" see this folder.
I was about to give up when I read the posts on this page and I entered the Terminal commands
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
I had not much hope when I set about to re-create the OD Master from the Server App.
But lo and behold !!! I did not trust my eyes when Server App claimed that the OD Master had been successfully created. And indeed, Server admin showed a running OD Master, LDAP, Kerberos and Password Server all running again !
Final touch: re-import the user accounts.
Epilogue:
I woud not have been able to fix this issue had not so many others shared their experience and the working solution.
(Refer : https://discussions.apple.com/thread/3219325?start=0&tstart=0 )
Thank you all !
Let's hope that Apple will fix this annoying issue in the next server update.
Regards,
Twistan

Hi Rhyan,
Please try clearing the security cache
http://www.sharepointanalysthq.com/2014/05/active-directory-groups-and-sharepoint-security/
https://sergeluca.wordpress.com/2013/07/06/sharepoint-2013-use-ag-groups-yes-butdont-forget-the-security-token-caching-logontokencacheexpirationwindow-and-windowstokenlifetime/
http://webactivedirectory.com/active-directory/windows-active-directory-cached-user-credentials/
Please remember to click 'Mark as Answer' on the answer if it helps you

Changing hostname beyond changeip

I'm trying to get the hostname changed on my server after doing a fresh install with 'macsrv1.local' as the initial hostname.
Doing changeip worked to change 'macsrv1.local' to 'macsrv1.domain.com' so that 'uname -a' reflects the new fqdn. My dns entry is fully under my control and has a proper reverse lookup record.
What I can't figure out is how to get the gui to reflect the new domain. Server admin shows local hostname as 'macsrv1.local' and under System Preferences - Sharing, using the edit button gives me a fqdn with the '.local' greyed so that I can't modify it.
What am I missing?

Hmmmm.. After talking to XServ support on the phone, I understand the distinction of .local
New to me - any OSX computer will show up with .local in server manager and this is functionally equivilant to 'loopback' or 127.0.0.1
No longer a problem.

Error while change name of server

Hi all!
Today I match an error and still can not resolve, I need you help me to correct it
When I change server name (old is dipasrv to domsrv) the OC4J_PORTAL can not start and when access portal page the following error appear. If you know, plz help me! Thanks so much!
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at 192.168.0.64 Port 80

When you change hostname, you must follow the procedure described on the manuals.
Check this:
http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#BHBBJEBF
Bye,
Andrea

Changing the TREX server

Hi,
We have TREX 7.0 installed in Solman. We have configured our SRM system to use TREX. Now we would like to bring the TREX server to the same system where SRM runs (SRM 4.0).
So there would be a server hostname change (From SOLMAN to SRM) for TREX configuration.
I have checked the URL in help.sap.com (attached below) which explains the "Changing the TREX Host Name (Single Host)", is it the only changes I have to perform for this switch over?
http://help.sap.com/saphelp_nw70/helpdata/en/47/1b074063616446e10000000a114a6b/frameset.htm
Please advice.
Thanks
Shyl

Hi,
Regarding the change in TREX server, please go through the below details and provide your inputs on the same,
Current Scenario:
TREX 7.0 is installed in Solution Manager system.
TREX is used by SRM and PI applications through RFC.
Requirement:
TREX for SRM should be moved from existing Solution Manager system to SRM server.
Question:
As per help.sap.com for host name change for TREX servers, it is mentioned only change the host name in TREX configuration files and Profile settings. But we have installed TREX 7 only in Solution Manager. We have older version of TREX in SRM server. So if we follow help.sap.com and change the files and move the file systems related to TREX 7 from Solution Manager to SRM system, is that the only change we have to perform?
OR
Do we need to install TREX 7 in our SRM server and then move related file system to the installed SRM server?
Please note that after the move also, TREX which use in PI application should work as usual.
I welcome all your inputs on this subject.
Thank you in advance.
Regards,
Shyl

Change hostname for Grid Control

Hi All,
I have installed OEM grid control 10gr2(10.2.0) on solaris. The installation was successfull.
the grid control login page appeared to be as
http://localhost:4889/em
I do not understand why grid control installation has picked up the localhost and local ip address 127.0.0.1 instead of using the server hostname and server ipaddress
Lets say i have following entries in /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.4.51 abc.xyz.com abc
how to change the GRID url to http://abc.xyz.com:4889/em?
thanks all in advance.

Thanks for the reply
The files are there,
$OMS_HOME/sysman/config/emoms.properties
And $AGENT_HOME/sysman/config/emd.properties
bash-3.00$ emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.1.0
OMS Version : 10.2.0.1.0
Protocol Version : 10.2.0.0.0
Agent Home : /u01/app/OracleHomes/agent10g
Agent binaries : /u01/app/OracleHomes/agent10g
Agent Process ID : 9997
Parent Process ID : 9988
Agent URL : https://localhost:3872/emd/main/
Repository URL : https://localhost:1159/em/upload
Started at : 2010-04-09 10:24:50
Started by user : oracle
Last Reload : 2010-04-09 10:36:08
Last successful upload : 2010-04-09 12:15:37
Total Megabytes of XML files uploaded so far : 22.36
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 35.24%
Last successful heartbeat to OMS : 2010-04-09 12:17:07
Agent is Running and Ready

Oracle 11.2 standalone grid infrastructure - change hostname

Hi
I have changed hostname of my server running RHEL 5.3 with Oracle 11.2 Grid Infrastructure (standalone). After I changed the hostname of the server, the crs daemon stopped working and I cannot connect to my +ASM instance any longer.
In Oracle 10g2it was enough to run localconfig delete, localconfig add
What should I do in 11.2 ?
Thanks for help
Groxy

Hi Groxy,
I recently found myself asking the same question and after a fair amount of digging around I found a way to do it. Your question is now a few months old, so maybe you have found the solution already, but if not the key is using roothas.pl rather than localconfig. I have written a brief blog post covering the approach I used, so please check that out if you want more information.
[http://oraganism.wordpress.com/2009/12/20/11-2-changing-hostname/|http://oraganism.wordpress.com/2009/12/20/11-2-changing-hostname/]
I hope this helps.
Martin

What needs to be changed if we change hostname in linux

Dear all,
I have a question and will appreciate for appropriate answer(s).
My machine name was lxcms120.cern.ch and Oracle 10g DB was running fine on it (listener, DB, Enterprise Manager). It is not a production system rather a test system.
Now, i changed its name to docms11.cern.ch
I change hostname in listener.ora & tnsnames.ora and listener started successfully.
I started db from sqlplus and it started without any complaints.
Now, when i tried to start Enterprise Manager (emctl start dbconsole), it didn't and return this error.
OC4J Configuration issue. /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_docms11.cern.ch_oralxcms120 not found.
Now, i know that when the machine name was initially lxcms120, it was /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_lxcms120.cern.ch_oralxcms120
and if i go to that directory, i could see OC4J_DBConsole_lxcms120.cern.ch_oralxcms120 but of course there is no OC4J_DBConsole_docms11.cern.ch_oralxcms120
My dbname instance is oralxcms120 and has nothing to do with hostname.
So, what is the solution to the problem. Moreover, are there any steps to do while changing hostname of the oracle database like in my case which i can follow to make all required changes.
Best regards,
Anjum

You will need to do a little more than just directory rename,
From Oracle document,When the database host name (including the domain name) or the IP address changes, deconfigure and then reconfigure the Database Console with the repository create command. Run the following command:
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create
or
emca -deconfig dbcontrol db
emca -config dbcontrol db -repos recreate
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/structure.htm#CACBBFGI

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

"could not save list changes to the server" while creating a new form in SharePoint Designer - custom content type

i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
Tnx

Hello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see Please remember to mark the replies as answers if they help and unmark them if they provide no help (On vacation from 16th Oct to 28th Oct 2014)

Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2

Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?

Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post]

Photoshop Elements 5.0 PC. Moved. How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures. Thanks

Photoshop Elements 5.0 PC. Moved. How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures. Thanks

You say you have the pse 5 disk?
I guess you do't have a dvd drive on your new windows 8 computer?
Do you have access to another computer with a dvd drive?
Anyway if you can find another computer with a dvd drive you could copy the pse 5 install disc to removable device like a camera card or flash drive.
You can also buy cheap usb dvd drives.

After changing 'MS SQL server' service's user name SDAC doesn't work properly

I've changed 'MS SQL Server' service user name
from .\admin (have had such already) to network_services
and now my oracle linked servers to Oracle instance stopped to work.
Namely, 'Cannot create an instance of OLE DB provider "OraOLEDB.Oracle" for linked server Ora_RO'.
In event log i see next:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{2206CDB0-19C1-11D1-89E0-00C04FD7A829}
and APPID
{2206CDB0-19C1-11D1-89E0-00C04FD7A829}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
So, MSDAINITIALIZE Class fails to start. I cannot locate this service under dcomcnfg. Could you help me?

The error seems to be clear what is causing the issue, check this link to fix this issue
Here the scenario is with SharePoint instead oracle so you can make out:-
http://www.wictorwilen.se/Post/Fix-the-SharePoint-DCOM-10016-error-on-Windows-Server-2008-R2.aspx
http://social.technet.microsoft.com/Forums/en-US/696204d5-b07e-46db-a785-737ea57b8da2/distributed-com-error-message
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Can I change the smtp server with Yahoo push account?

My yahoo email account will send and receive over EDGE using the default yahoo mail settings. On my home Cox internet WiFi network I can retrieve messages but cannot send. When sending it says it was sent and makes the "swooshing" mail sent sound, but the message disappears. It does not appear in the "sent" folder or "drafts" folder either. No error message is returned.
I suspect this is related to Cox blocking the smtp server, but the iPhone does not allow me to change the smtp settings on the default yahoo account. Does anyone know how to do this? I can set it up manually for POP access, but then I'm flooded with spam.

No, you cannot change the SMTP server on the Yahoo push account.
Yahoo push only works if you configure your account using the Yahoo! Mail shortcut on the iPhone, and that shortcut does not allow for ANY customization.

Prime 13 changing Hostname on Server

Similar Messages

Maybe you are looking for