Number of items/records display

I want to set the number of items/records display base on query. I tried Set_Block_Property and Set_Item_Property, they don't have any option for me to set it dynamically. Any ideas?
Thanks

A couple:
a) Set QUERY ALL RECORDS to YES, and programmaticaly set MAXIMUM RECORDS FETCHED.
b) in a POST-QUERY block-level trigger, check the :system.trigger_record. When it reaches the number you want, issue an ABORT_QUERY built-in.
Hope this helps,
Pedro

Similar Messages

How count number of item records in a File: Idoc to File scenario

Hi All,
I am configuring an IDOC to File scenario.
Once all the IDOC data is dumped on a File, I need to calculate the number of Item records in this file and write this number at the end of the trailer record in the file.
Is theer a way to calculate the item data records(or say number of lines in the file) in the message mapping area. Or any other simple way to do it.
Appreciate your help on same.
Thanks
Shirin

hi,
Use the count function for ITEM node the assign this count value to the receiver field , keep the ITEM context to header!
Thanks,
Vijaya.

Exchange 2010 OWA [Change Number of items to display per page]

Hi Sir,
I have some problem and question ?
I has migrate from exchange 2007 to exchange 2010.
Exchange 2010 OWA cannot Change Number of items to display per page
Exchange 2007 can change number of items to display per page
Exchange 2010 OWA cannot Change Number of items to display per page
You can help me to solved problem and customization?
Thank you.
Boongerd

Hi,
This feature has been moved in Exchange 2010 OWA. However this feature is available in OWA light version. Here are steps to change the settings in OWA light version.
Log in to OWA, click the Use the light version of Outlook Web App
check box on the login page.
Select Options in the upper right hand corner of the screen.
Select Messaging from the left navigation panel.
In the section for "Message Options", change the "Number of items to display per page", select the desired number of messages.
Exchange 2010: OWA versus OWA light.
http://blogs.technet.com/b/ilvancri/archive/2010/04/07/exchange-2010-owa-versus-owa-light.aspx
New Features in Exchange 2010 OWA.
http://technet.microsoft.com/en-us/library/aa998629(v=exchg.141).aspx
Best Regards.

How to change 'Number of items to display' for a list view programmactially?

in CSOM would be perfect.

I figured it out. var context = web.Context;
var list = web.Lists.GetByTitle(listTitle);
var view = list.Views.GetByTitle(viewTitle);
view.RowLimit = rowLimit;
view.Update();
context.ExecuteQuery();

How to limit the number of items in a KPI Status list web part?

How to limit the number of items in a KPI Status list web part? There is no paging option for Business Category Status list or any limit can be made by changing the Item limit in default view unlike other SharePoint List web parts. So How to achieve it?
Kindly help.
Regards,
ZA
zzzSharePoint

Hi,
According your post, I know you would like to set the item display limit in Status List web part.
In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
of items in the Status list web part.
It could be a potential issue in SharePoint 2010.
We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
Appreciate your time and efforts.
Thanks.
Tracy Cai
TechNet Community Support

Items to display in list view web part not showing the items setup

Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?

thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
show information, so, it works partially because one part works and not the other.

How to limit the number of items from RSS using XSLT

Hello,
I am using plsql to read contents from RSS, basically a simple RSS reader.
I would like to somehow want the feature to restrict the number of items in the RSS feed, say I would like to display only the first 5 items.
How could I achieve this?
Any help is highly appreciable.
Thanks in advance.
Regards

Hi,
According your post, I know you would like to set the item display limit in Status List web part.
In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
of items in the Status list web part.
It could be a potential issue in SharePoint 2010.
We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
Appreciate your time and efforts.
Thanks.
Tracy Cai
TechNet Community Support

Change number of record displayed for a single item alone

Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.
Is this achievable?
Or should i have to put that item in a separate data block and choose the data block property to "Number of records displayed" as 10?
Thanks,
Yuvaraaj.

983448 wrote:
Hi,
I have a single data block with few items. Is it possible to make one item in the block as non-database item and make the display of record in the item alone to show multiple lines.
i.e. All other items in the Data block shows single record, whereas this particular item should shows 10 records.Yes you can. But i will say re-check your design.
Hamid
Mark correct/helpful to help others to get right answer(s).*

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

Rows Per Page doesn't affect the number of records displayed

I just updated from 3.2 to 4.0 this morning. When I change the Rows Per Page value in the action menu the report doesn't change and the number of records displayed stays at 10. The report has ~6000 records. I edited the report attributes and add the rows selector to the IR search bar. This doesn't change the behavior either. I noticed that if I change the rows per page in the action menu then the drop down select list is updated, but the report still doesn't change from 10. I tried paging to the next set of results and it still remains at 10.
Has anyone else experienced this problem?
Tony

Yes, Tony, I've seen this in several versions of APEX. In most cases, simply starting a new session was enough to force APEX to refresh the page and grab the new set of pagination directives. If that doesn't work, please give more info like: what type of report you are doing and what the Pagination values are. Please note the following:
Report Template
Pagination Scheme
Enable Partial Page Refresh
Display Position
Number of Rows/Number of Rows Item
Maximum Row Count

Populate multi record display item

Hellou gurus!
I have forms 10g and i need to populate display item in enter query mode. My problem is that I have table T1 with some static values. Table T2 is through ID connected (reference) to table T1 1:1 cardinality and T2 table also have reference to T3 table.
I have block B2 based on table T2 and in this block I have multirecord item for inserting and updating new values for T2, but in this block ii also have no DB, multi record display item (because i don't want to allow editting in T1 table records) for diplaying static values for table T1. I want to display all static values from T1 next to the editable values in T2 (T2 multi record field is not insert yet). I tried for loop, select into but it not work. T1 values need to be selected before I started to inserting values into T2 items, but off course they need to be referenced It is hard to explain but i belive you understand.
Can you help me how I can populate multi record item??

You have to write the code again for your second list item....
group_id RecordGroup;
list_id Item := Find_Item('button.tyear');
list_id1 Item := Find_Item('button.tperiod');
status NUMBER;
rg_name varchar2(40) := 'recgroup';
BEGIN
----------------------------- LIST
clear_list(list_id);
group_id := Find_Group(rg_name);
IF NOT id_null(group_id) then
Delete_Group(group_id);
End if;
group_id := Create_Group_From_Query(rg_name,
'select vm_year, vm_year from fwqgl.vouchermaster
group by vm_year');
status := Populate_Group(rg_name);
Populate_List(list_id, group_id);
/* --------------------SECOND LIST ITEM...BUT REC. GRP NAME CAN BE SAME,better to use another name if you need to retrieve list and store qry..other wise the fol. code is enuf-----------------------*/
clear_list(list_id1);
group_id := Find_Group(rg_name);
IF NOT id_null(group_id) then
Delete_Group(group_id);
End if;
group_id := Create_Group_From_Query(rg_name,
'select vm_period, vm_period from fwqgl.vouchermaster
group by vm_period');
status := Populate_Group(rg_name);
Populate_List(list_id1, group_id);
END;Edited by: Dora on Dec 5, 2009 10:41 AM

Automatic Number of record displayed

hi to all,
how can i insert automatic number record displayed on a detail data block.
e.g :
If i input 5 on a text box and press a button the detail will display on 5 records.But during form load initially it has Zero rows dislayed.

You can use the set_block_property method in the when-button-pressed trigger of your button.
set_block_property('block_name',MAX_RECORDS_FETCHED,'<block_name>.<text item where you'll enter the no of rows to display>);
go_block('block_name');
Ensure that Query all records property of the block is set to Yes for the above to work.
Hope this helps.
Please mark answer as helpful / correct, if it helps you

Does Anyone Know How to Display Number of Items in a Folder?

After "upgrading" to Lion, none of my folder display the number of items in the folder --a nice bit of information that was available in earlier versions of the operating system. Is there an automatic way to see that information? [I imagine there are other really inconvenient ways, but is there a nice CONVENIENT setting I haven't figured out?] THANKS.

From your View menu in Finder choose "Show status bar"
EDIT: Also there is QuickLook which is no longer on the toolbar of the Finder window but you can choose from "Customize Toolbar".

Error msg "Maximum number of items in FI reached" displayed while backflush

Dear Gurus,
The scenerio at our client's site is that of MTO using strategy group 50 and variant configuration.
The production process goes through a sequence of three operations. Details are as under:
1. Operation 10: Control key (PP01), all components (say some 1500) are allocated to this operation.
2. Operation 20: Control Key (PP01), no components allocated to this operation.
3. Operation 30: Control key ( PP03), no components allocated, AutoGR maintained in control key.
Now the issue is while doing confirmation using T code CO1F, individually for all the operations, backflushing of some odd 900 components is not taking place. The components get stock in COGI. Each time these are to be cleared from COGI, although there is sufficient stock of these components for these components.
The error msg that is being displayed in COGI is "Maximum number of items in FI reached".
Pls suggest how to take care of it.
Regards,
Pradeep Santara

Hi,
The error is due to the maximum line items have been reached in FI.
actually you cann't post more than 999 items in one acctg doc at one time.
regards

Display number of items in Get Info results?

Our studio has finally made the jump to OS-X (Tiger) from OS-9. (Okay... I'll admit we had a bit of an "encounter" with Windows XP in the interim...)
Part of our production workflow sees 1000's of folders/files routinely moved around from various media - CF card to hard-drive, DVD to external hard-drive etc. As part of our SOP, after a large transfer of important files, we check both the source drive/folder and the destination drive/folder to ensure the item count is the same.
In OS-9, Apple accomodated this step in the Get Info window by showing the number of items in any given volume or folder. In OS-X, it seems to be gone. Surely I'm missing something...
If Apple truly has done away with this feature (bad move from a production standpoint IMHO) is there a third-party patch or app that can display the number of items in any given folder or volume?
Thanks-
j
G5 Mac OS X (10.4.5)
G5 Mac OS X (10.4.5)

I made an Automator action, which I can access with a control click on any folder.
1. Launch Automator, click on Finder in the Library, then drag the "Get Selected Finder Items" from Actions into construction area
2. Click on Automator in the Libray, select Run Applescript in Actions and drag it into the work area
3. Paste in this Applescript:
tell application "Finder"
count every file of entire contents of (selection as alias) --files only
display dialog ((the result) as string) & " Files" & "." buttons {"OK"} default button 1
end tell
4. Go to menu item File and select Save As Plugin, fill in the name and have it as a plug-in for Finder. It will be saved to
"/Users/username/Library/Workflows/Applications/Finder/FileCount.workflow"
which will appear in the Automator section of your control click contextual menu.
This counts files only. If you want to include files and folders you will need to change the Applescript.
Francine
Francine
Schwieder

Number of items/records display

Similar Messages

Maybe you are looking for