Prime Infrastructure failed to communicate with MSE

We have PI 2.0 and MSE 7.4.110 running on VMware under same subnet. Both of this able to ping each other but unable to communicate SOAP/XML via HTTP/HTTPS. I tried to telnet MSE port 443 also no respond but I check on MSE firewall is "disable". I also try to stop/start the service with below script but no luck.
Step 1 Tstop the software, enter /etc/init.d/msed stop.
Step 2 To check status enter /etc/init.d/msed status.
Step 3 To start the software, enter: /etc/init.d/msed start.
After checking on MSE with Step 2 command, i found out that both HTTP and HTTPS is "false". Is they anyway to enable this services?
Has anyone ever solve the problem?

I had a similar issue with only difference being the Use HTTPS: null. I ended up re-running the setup ( via /opt/mse/setup/setup.sh) and reset the NCS username and password back to the default (select D). Then it worked straight away.

Similar Messages

Migration from Exchange 2007 to 2013 gives error "Failed to communicate with the mailbox database'

I have been trying to migrate several databases from Exchange 2007 to Exchange 2013. The migration started successfully, and many of the mailboxes moved successfully (about 70). The remaining mailboxes, failed. Looking deeper, we found a few issues; The
two 2013 Mailbox servers were on different versions. The Server had run out of disk space, and the NIC drivers needed to be updated.
Now when we try to migrate a mailbox that had failed in the earlier batch, we get the following error:
Data migrated:
Migration rate:
Error:
MigrationTransientException: Failed to communicate with the mailbox database. --> Failed to communicate with the mailbox database. --> MapiExceptionNetworkError: Unable to make connection to the server. ‎(hr=0x80040115, ec=-2147221227)‎ Diagnostic
context:    ......    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam:
0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server
FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 45169   StoreEc: 0x824
Lid: 50544   ClientVersion: 15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 44273      Lid: 49064   dwParam: 0x1    Lid: 37288
StoreEc: 0x6AB         Lid: 49064   dwParam: 0x2    Lid: 59431   EMSMDB.EcDoConnectEx called [length=203]    Lid: 51239   EMSMDB.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184      Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 3460    Lid: 12696   dwParam: 0x0 Msg: EEInfo:
Generation Time: 0414-04-07T16:32:03.2100000Z    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 2    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1753    Lid: 9624
dwParam: 0x0 Msg: EEInfo: Detection location: 501    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4    Lid: 8856
dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp    Lid: 8856    dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: <Server FQDN>    Lid: 12952   dwParam: 0x0 Msg: EEInfo:
prm[2]: Long val: 2767313664    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662    Lid: 59505   StoreEc: 0x824         Lid: 50544   ClientVersion:
15.0.847.32    Lid: 52080   StoreEc: 0x824         Lid: 36081      Lid: 51152      Lid: 52465   StoreEc: 0x80040115
Lid: 60065      Lid: 33777   StoreEc: 0x80040115    Lid: 59805      Lid: 52487   StoreEc: 0x80040115    Lid: 19778      Lid: 27970
StoreEc: 0x80040115    Lid: 17730      Lid: 25922   StoreEc: 0x80040115
All of the issues listed above have been corrected, and all of the databases are mounted. Users are able to send and receive mail, but I can not migrate mail using the Migration Batch utility.
The destination server is a Hyper-V Guest running Server 2012, SP1, and Exchange 2013
The Source Server is Running Exchange 2007.
I have tried doing a test move to another destination server that is also Server 2012, and Exchange 2013, and the migration also failed.
I would appreciate any help you can give me!
Thanks,
Jon

Any update if you have resolved the issue.
Not similar, but this thread can be helpful while you migrate the mailboxes from exchange 2007 to 2013. Please check :http://social.technet.microsoft.com/Forums/exchange/en-US/721f0ae4-623a-4b02-adaf-f561d86c0426/move-mailboxes-and-public-folders-from-exchange-2007-to-exchange-2013?forum=exchangesvrdeploy&prof=required

Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901

Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron

DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
Rob

Hello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl

OAM11g R2-SEVERE: Failed to communicate with any of configured AccessServer

After Installation of OAM11gR2, when i try to start the weblogic server and managed server below message is displaying"SEVERE: Failed to communicate with any of configured Access Server, ensure that it is up and running."
But i am able to access OAM console and do the confuguration on LDAP store.
Then why this message is displaying and it will cause any issues further?

see if this helps:
The issue is due specific settings for IAMSuiteAgent agent in WLS console
In WLS console -> Security Realms ->myrealm ->Providers - >IAMSuiteAgent ->Provide Specific - there was "localhost:5575" set as Primary Access Server. >> change Primary Access Server to be : > for current case ServerName2:5575
Restart OAM managed server and Weblogic AdminServer

CBS failed to communicate with other server

Hi All,
I have created one track and I have imported it in NWDS. In NWDS I have created one new DC and one sample WD project under that newly created DC, it has asked to create new activity. There I am successfully created new activity and my application is working fine. When I want to checkin the activity it is giving server communcation failure exception. The excpeiton I am getting is " Activation failed: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)". What are the steps I need to take to resolve the issue.
Regards
Suresh

Hi,
Take a look at these threads:
CBS Server Error
Akshatha

Failed to communicate with camera

Hi, I have a Canon 5D that I have had for many years and have been using PC very succesfully when transferring images from the Canon 5D to the PC. I simply connect the USB cable from the camera to the PC and everything happens automatically. I just bought an Apple and when I plug the same Camera (via the USB) with the Apple Macbook Pro I get the following error "Failed to communicate with camera. Check connections". What does this mean. My Canon 5D is working 100% as it works with a PC and the USB cable is the same cable that works with the PC. PLEASE HELP!!!!

Great to hear it! & welcome to the mac family!

Failed to communicate with database.

Hello,
I have a problem with MYSQL data base. when i start vda service i look at the log file */var/cacao/instances/default/logs/cacao.0* and see:
Sep 1, 2009 11:33:45 AM com.sun.vda.service.core.ServiceModule waitForDatabase
WARNING: Could not connect to database. Trying since 555 seconds.
Sep 1, 2009 11:34:32 AM com.sun.vda.service.core.ServiceModule$Initializer run
SEVERE: Caught exception: Startup of com.sun.vda.service module failed: Timeout - Failed to communicate with database.
what could cause this?
thanks in advance.

Hi Michael,
I only think ind doing the same but more... slowly...
Stop cacao:
cacaoadm stop -fStop the database (note the '-s')
svcadm disable -s svc:/application/database/vdadb:sqlStart the database:
svcadm enable -s svc:/application/database/vdadb:sqlStart cacao:
cacaoadm startAt the same time you can tail the logs of both:
/var/cacao/instances/default/logs/cacao.0
/var/svc/logs/application-database-vdadb:sql.log(I'm not quite of the last log file location)
Both logs may give perhaps some information.
Can you post here the complete output from '/opt/SUNWvda/sbin/vda-db-status'? "localhost up" actually can mean three different things.
It just seems that the database is fine and cacao cannot reach it.
Jorge

CBS failed to communicate with some other server.

Dear All,
We are facing this error when we are trying to activate a request in
NWDS & trying to check in.
Error:Activation failed: CBS Server Error: CBS failed to communicate
with some other server.( internal code: COMMUNICATION_ERROR)
Just for your information, we had changed the password for nwdi_cmsadm
few days back and then followed a note896427 and then had fixed the
error.
The NWDI_CMSADM password problem was solved and the transports were
working very fine till today. But today afternoon when the developer
tried to activate the request in NWDS, he got this error. Can you
please let me know the problem.
We are stuck and not able to go ahead.
Thanks in advance.
Warm Regards,
Rajeet

Hello,
I am getting this error :
CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
while importing ESS into Dev. I have a user created called cmsadmin and has all the permissions/roles assigned. other files are already imported (epbuildt, pcuigp,epbuildt,sap-jtechs, sap-jee). Only this file is failing.
I have seen the Notes about user/password upgrade. But we are on 04s sp14. and i have this user cmsadmin .
Please advise.
Thanks,
Anil.

Prime Infrastructure 2.x tacacs+ with radiator

Trying to setup Prime Infrastructure 2.x (2.2) to use Tacacs+. The Tacacs service is running on a Linux server running Radiator(4.12). With Radius and Radiator all we needed to do is define the user group and all the tasks associated with that group were inherited.
When configuring the TACACs configuration files have tried various permutations of adding the cisco-avpair(cisco-av-pair) reply attrs on authentication and/or authorization. When defining the group or using the individual tasks I get the following error message:
"no authorization information found for remote authenttication user. please check the correctness of the associated task(s) and Virtual Domain(s) in the remote server"
<ServerTACACSPLUS>
Key SECRET
Port 49
GroupMemberAttr OSC-Authorize-Group
# General Authorization rule format:
AuthorizeGroup core-group permit protocol=HTTP service=NCS {cisco-av-pair="virtual-domain0=ROOT-DOMAIN" cisco-av-pair="role0=Super Users" }
</ServerTACACSPLUS>

It's not yet supported. Cisco doesn't generally publish roadmaps publicly for future support. The best you can do via public sources is to continue to watch the Supported Devices lists for updates.
As of right now, here is a list of the current data center switches supported (in PI 2.1):
Cisco Nexus 6004 Switch
Cisco Nexus 5596T Switch
Cisco Nexus 5010 Switch
Cisco Nexus 5020 Switch
Cisco Nexus 5020T Switch
Cisco Nexus 7000 10-Slot Switch
Cisco Nexus 7000 18-Slot Switch
Cisco Nexus 1000V Series Switches
Cisco Nexus 1010 Virtual Services Appliance
Cisco Nexus 4001I Switch Module for IBM BladeCenter
Cisco Nexus 4005I Switch Module for IBM BladeCenter
Cisco Nexus 5548P Switch
Cisco Nexus 5548UP Switch
Cisco Nexus 5596UP Switch
Cisco Nexus 3064 Switch
Cisco Nexus 3048 Switch
Cisco Nexus 3016 Switch
Cisco Nexus 7000 9-Slot Switch
Cisco Nexus 9500 Switch
Cisco Nexus 3548 Switch

Cisco Prime Infrastructure 1.2 synchronizaton with active directory

hi all
I have installed Cisco Prime Infrastructure 1.2 and I want to make a synchronization between the PI and the active directory
note:
I want to make that to be able to search about the users on cisco prime infrastructure using Hostname instead of serching on it using IP or MAC address.
how can I do this task ???
thanks all.
I appreciate your support.

Hi Mohamed,
Integration with AD is not supported in PI
Thanks-
Afroz
[Do rate the useful post]

Prime Infrastructure 2.1 problem with sorting devices in device groups

Hi,
I have a problem with prime infrastructure, namely prime is not doing appropriate sorting of devices in default device groups.
Example: device type > routers > Cisco 2800 series integrated services routers - under shown results there are Cisco 2911 Integrated Service router, Cisco 2901 etc.
Any solution?
Tnx

Hi all:
I have tried using Designing Monitoring Template to set the Health Check Polling time from default 15 minutes to 5 minutes and also tried also 1 minute.
The result is 5 minutes is working but 1 minute is not working.
May I know any one can help on this?
Many thanks!
Best regards,
tangsuan

PRIME Infrastructure OVA co-residency with CUCM on UCS

Hallo All.
Has anyone installed the PRIME Infrastructure OVA alongside CUCM on a UCS?
I've been looking at this document
http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines but it is vague on PRIME Infra.
Also, the CUCM I am installing alongside is v8.5
Any thoughts?
Cheers
David

The PI documentation is lagging a bit - the only requirements for the current release are what's in the Quick Start Guide here.
There is no requirement for dedicated cores. As long as your VM meets the hardware specification of the QSG, your installation should be OK. (Of course, it doesn't hurt to provide more than the minimum requirements.)

Prime Infrastructure Failed to run report

Hi all,
on a new installed PI 1.2.1 I have the following error message as soon as I run a report:
Failed to run report: Could not connect to HTTP invoker remote service at [http://localhost:20556/reportingserver/remoting/ReportingService-httpinvoker]; nested exception is java.net.ConnectException: Connection refused
I'm not sure if the "localhost" is the problem.
Anybody any idea?

Stopping and starting NCS didn't seem to help me. Reporting was running before I stopped NCS and after starting NCS
Any other ideas?
server/admin# show version
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.1.038
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: SV195968
Version information of installed applications
Cisco Prime Network Control System
Version : 1.2.1.012
server/admin#
Failed to run report: Could not connect to HTTP invoker remote service at [http://localhost:20556/reportingserver/remoting/ReportingService-httpinvoker]; nested exception is java.net.ConnectException: Connection refused
server/admin# ncs status
Health Monitor is stopped.
Reporting Server is Stopped
Ftp Server is Stopped
Database server is stopped
Tftp Server is Stopped
Matlab Server is Stopped
NMS Server is stopped.
SAM Daemon is not running ...
DA Daemon is not running ...
Syslog Daemon is not running ...
status
server/admin# ncs start
Starting Network Control System...
This may take a few minutes...
Network Control System started successfully.
start
server/admin#
server/admin#
server/admin# ncs status
Health Monitor Server is running.
Reporting Server is running
Ftp Server is Disabled
Database server is running
Tftp Server is Disabled
Matlab Server is running
NMS Server is running.
SAM Daemon is running ...
DA Daemon is running ...
Syslog Daemon is running ...
status
server/admin#

DFS Replication doesn't work. Windows server 2012. Failed to communicate with partner. Error 5012.

Hi! I really confused with this error. I created replication group within two servers - AD domain controller and File server. I just want to migrate some files from AD domain controller to FS. But synchronization doesn't work. I get the error
- DFS Replication cannot replicate with partner <server name> for replication group <domain>\<name space>\<share>. The partner did not recognize the connection or the replication group configuration. The DFS Replication service used
partner DNS name MyDCName, IP address <the server ip>, and WINS address <server name> but failed with error ID: 9026 (The connection is invalid). Event ID: 5012
It seems my DC doesn’t accept connection from FS. I checked network, permissions and other settings which are mentioned in this article.
http://social.technet.microsoft.com/Forums/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?Thread%3A953be9ef-e9e3-4885-a5c4-47fc475ba562=Microsoft.Forums.Data.Models.Discussion&ThreadViewModel%3A953be9ef-e9e3-4885-a5c4-47fc475ba562=Microsoft.Forums.CachedViewModels.ThreadPageViewModel&forum=winserverfiles
But nothing happens. Replication still doesn’t work. Please, help me with this. May be there is a check list to solve this problem? Thank you.

Check this ; https://social.technet.microsoft.com/wiki/contents/articles/1205.dfsr-event-5012-dfs-replication.aspx
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Prime Infrastructure failed to communicate with MSE

Similar Messages

Maybe you are looking for