Print all filters defined in a report

I would like to print all filters that are defined in a report using DeskI or WebI (both version XI R2 and 3.1)...
In DeskI there are 2 functions in the "Insert" > "Special Field" menu: "Global Filters" and "Query Prompt"; however, I also want to list all other filters that are set on tables in the report...
It seems that it's not possible in WebI / WebI Rich Client at all...
Thanks!

change your query with like
SELECT * FROM TABLE1 WHERE ACCEPTED like :P_ACCEPTED.
and send % as backed value against ALL

Similar Messages

Report not printing all the characters -main section width greater than 11"

Hi,
I am trying to build/modify a Report (used in Oracle Apps) which will be printed on some perforated paper. The perforated paper is little bit wider (11.25 inches) than the regular A4 size paper.
The problem is when I print the report in Oracle Apps, the report isn’t printing all the characters at end of the page. I adjusted the page width to 11.25" in the main section's property palette, but the same thing is happening. Another point to mention is, I should use all of paper space.
I am not sure if it’s a report builder issue or oracle apps issue.
Any help is appreciated.
Thanks
Srikanth

You must have larger margin. Try to make smaller header and/or footer.

Report header section does not print all pages

Hi,
I have a custom report that consists of all 3 parts. it has a header section, main section, and a trailer section.
I have a problem in a header section that it does not print all pages. It only gives the output of the first page and the last page for the header section.
I open the .rdf file with oracle reports 6i .
what do i need to check please?

Please refer the following thread:
http://oracle.ittoolbox.com/groups/technical-functional/oracle-dev-l/report-header-section-does-not-print-all-pages-4166062

Saving/Printing all pages of Report developed in Portal....

Hi friends,
How can I save a Report developed in Portal as soft file?
I know there is a feature in Customizing Report to enter the
File save as Excel and it will try to save file.
I have 2 questions :
a) How can I achieve saving the Report as html/ascii/excel file
when it has say 20000 rows ?.
(Because always when I run a report on browser it brings data
when I press "Next" and "previous" buttons.)
b) If I need to print the Report to printer how can I print all
pages of Report output?
Thanks a million for your valuable time.
Sincerely
Madhav

I also noticed there is a Firmware Upgrade Utility out on HP.COM that addresses a few PJL command issues, so it might be worth checking the Firmware versions on your units to see if you have the latest:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=lj-725...
Though I work for HP, My posts express MY opinion, and not those of HP.

Printing all error messages in the out put report

Hi all,
I have MATNR and WERKS data in final internal table now my requirement is ineed to print all the error messages for all the materials (where sy-subrc ne 0) in the out put report. how can i do it for multiple error records will anybody tell me with coding
The Requirement is like bellow:
Take material number(s) (MARC-MATNR) from selection screen then check to see if any plants have that material setup as QM active (MARC-QMATV). If no, then issue message on report.
Thanks,

Hi Mythili,
Hope the attached code helps you...
TABLES marc.
TYPE-POOLS: slis.
TYPES : BEGIN OF g_ty_msg,
 type LIKE sy-msgty,
 msg(120),
 END OF g_ty_msg.
TYPES: BEGIN OF g_ty_marc,
 matnr TYPE matnr,
 werks TYPE werks_d,
 qmatv TYPE qmatv,
 END OF g_ty_marc.
DATA: g_t_msg TYPE TABLE OF g_ty_msg,
 g_r_msg TYPE g_ty_msg.
DATA: g_t_marc TYPE TABLE OF g_ty_marc.
FIELD-SYMBOLS <fs_marc> TYPE g_ty_marc.
SELECT-OPTIONS: s_matnr FOR marc-matnr,
 s_werks FOR marc-werks.
START-OF-SELECTION.
SELECT matnr werks qmatv FROM marc
 INTO TABLE g_t_marc
 WHERE matnr IN s_matnr AND
 werks IN s_werks.
IF g_t_marc IS NOT INITIAL.
 LOOP AT g_t_marc ASSIGNING <fs_marc>.
 IF <fs_marc>-qmatv IS INITIAL.
 g_r_msg-type = 'E'.
 CONCATENATE <fs_marc>-matnr <fs_marc>-werks
 INTO g_r_msg-msg SEPARATED BY space.
 APPEND g_r_msg TO g_t_msg.
 CLEAR g_r_msg.
 ENDIF.
 ENDLOOP.
ENDIF.
END-OF-SELECTION.
PERFORM display_log.
*& Form display_log
 To display error log as an ALV Popup
FORM display_log .
CONSTANTS: l_c_type(4) TYPE c VALUE 'TYPE',
 l_c_msg(3) TYPE c VALUE 'MSG'.
DATA : l_t_fieldcat TYPE TABLE OF slis_fieldcat_alv,
 l_r_fieldcat TYPE slis_fieldcat_alv.
DATA : l_f_line TYPE i.
CLEAR l_r_fieldcat.
l_f_line = l_f_line + 1.
l_r_fieldcat-col_pos = l_f_line.
l_r_fieldcat-fieldname = l_c_type.
l_r_fieldcat-seltext_m = 'Type'.
APPEND l_r_fieldcat TO l_t_fieldcat.
CLEAR l_r_fieldcat.
l_f_line = l_f_line + 1.
l_r_fieldcat-col_pos = l_f_line.
l_r_fieldcat-fieldname = l_c_msg.
l_r_fieldcat-seltext_m = 'Message'.
l_r_fieldcat-outputlen = 120.
APPEND l_r_fieldcat TO l_t_fieldcat.
To display the message log as a Popup in the form of ALV List
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
 EXPORTING
 i_title = 'Message Log'
 i_tabname = 'G_TY_MSG'
 it_fieldcat = l_t_fieldcat[]
 TABLES
 t_outtab = g_t_msg
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_log
Best Regards,
Suresh

Print All Objects

On some of my Analyzer 7.2.5 reports, when I try to print with"Print All Objects", the radio button grays out andfreezes, and I need to kill it through Windows Task Manager. This has consistently happened to the multiple-object (6objects) reports, but it also inconsistently happened to reportswith 3 objects - it happens to some 3-object reports, but not theother 3-object reports. It seems to work fine with other reportswith 1 single object. Does anyone know the limit, which it shouldn't, of thefunction? Thanks.

Gurram wrote:
want to read .rex File. The file contains combination of SQL code with table Names, Packages,Functions,There are three basic ways to read an external file.
You can use UTL_FILE and use standard/basic file I/O calls like fread() and fwrite() - common amongst most (if not all) programming languages.
You can define an external table for the file, and SQL*Load the contents of the file dynamically via a SQL SELECT statement.
You can load the file into a CLOB using DBMS_LOB and then process it - quite useful if the text file is XML as the XMLTYPE supports parsing a a CLOB containing XML.
I want to pick Each object name put in a separate file line by line.That in turn will need to use UTL_FILE to create an external file.
Keep in mind though that your in a database environment with PL/SQL. The very best place for data is inside the database in SQL tables. Not outside as external files. Thus you need to ask yourself whether dealing this way with external files is the best solution, and a robust and scalable one.
Granted, many times from the database side we need to deal with external files. The optimal method usually is to load that file's data into a database table as structured data - data that can be accessed via SQL and sorted, filtered, aggregated and analysed.
To provide a "file" as output - this should ideally be done directly from structured data (SQL tables). And can be done using HTTP (via a web enabled PL/SQL procedure that supplies the file content as a http Mime stream), using FTP (via UTL_TCP) or as a CLOB via a PL/SQL call interface. Using UTL_FILE is not necessarily the only option.

How to print all columns in one page

Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PM

Hi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks

Requirement to print data of first and second report of an ALV at once

Hi,
I have an interactive ALV report in which on double click of any of the record on first report, its details get displayed in second report. My requirement is to print all the data (of first and second report) at once.
Kindly tell me how can I achieve this functionality.
Regards,
Seema Naharia

Hi Seema,
Try with this FM 'REUSE_ALV_HIERARCHICAL_LIST_DISPLAY'.
Regards,
Sujatha B.

How to print all pages using ALV from CL_SALV_TABLE?

Dear friends,
I have a report which displays a dynamic internal table using CL_SALV_TABLE. The display format is normal list.
And since this dynamic internal table is big, I have divided it into a sub internal table which displays 10 columns in one page at one time. And each page is displayed using a customized button that I set as MyFunction.
The problem is, when I click List->Print or Ctrl-P, the system will only send to spool the current page even though in the Print dialog box, I choose Print All option.
Is there a way to rectify this? Thanks.

Hi,
Try this..code...the above FM expects purchasing organization..revised code below mentioned..
please try..
DATA: kdy_val(8) VALUE '/110'.
SET PARAMETER ID 'LIF' FIELD 'VENDOR'. " Pass the vendor
SET PARAMETER ID 'KDY' FIELD KDY_VAL.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
Thanks
Naren

How not to print all the pages of a smartform? (for tr F150 - Dunning)

Hi Forum
We have the follow situation:
For DUNNING (transaction F150) the user want stamp 3 diferents SMARTFORM.
For the first time the transaction is executed is required only a list of documents, for the second time (via sample printout, indiv dunn notice or dunn history) once the legal data of the customer is updated, the user wants the list of documents, a letter for the lawyers and a letter for the client, in the follows executions (3 and up) the user can require only the list of documents or all smartforms (list and letters)
Via customizing we can control the normal dunning and the legal dunnig, but once the client is in legal status the transaction create only the legal smarforms.
We found an user exit associated EXIT_SAPF150D_001. in the F150 transaction, but is not complete, in sense that are failed some parameters .
Another option is create an unique smartform with 3 pages where we can control the case for the print, but here is where we ask: How we can do to print a specific page of the smartform without print all of them (how can we print the 2nd and 3rd page without print the firs one) ??
To control the 3rd execution, we can create a dictionary table with a flag .
Thank you for your help

You could create a report containing all the single reports in one using UNION. This report could be placed on a "hidden" page. The link for downloading that report you can place on your page. That should work.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

Print Multiple Parameter Value in Crystal Report 2008

Hello and Hi
i want to select multiple warehouse in a pramater , i select and report working but parameter print only first parameter value on report.how can print all selected values on report

Hi
I am assuming you select warehouses WH1,WH2,WH3,.......
You have to create a formula in Crystal
It should look like this
Join({?YourParamaterName},",")
Place the formula on your report.
The last Part of the formula is the "notation break" between every parameter returned. In this case a > , <
Return would be WH1,WH2,WH3,.......
Join({?YourParamaterName},"#") would return WH1#WH2#WH3#.......
Hope you get the idea
If this solution helps, please rate me.
Regards
Burger

How to Print GIF image in XML RTF Report

Hi All,
I have one requirement like to print the GIF image in Oracle Report.
The report is an XML Report.
The image file stored in database, the table is fnd_attached_docs_form_vl.
select distinct file_name from fnd_attached_docs_form_vl
Front end Navigation ----->
view -----> Attachments
Now i need to get the image from there and print it report.
Can you pls help me.
Regards
Venu

Hi,
I didn't tried that scenario as my report is not a Non-XML Report.
And my report is XML Report.
Regards
Venu

How to print all data in a table?

Hello!
I am doing report with VC. Now I want to print data ,The system action "print" can not print all data,only a page in the table can be printed. Are there any ways to finishe the print function,Can you help me?
Thank you very much!

See this how to guide I put together:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123

How to print all columns using af:showPrintablePageBehaviour component ?

Hi,
JDev ver : 11.1.1.2.0
I have 25 columns in my table and table is surrounded by panel collection.
In panel collection toolbar facet I have added one command button and inside command button I have added af:showPrintablePageBehaviour compoent.
I can able to see only 15 columns which are fits to entire browser window.
How can I print all 21 columns using this in new browser window or any other way ?
regards,
devang

Hi,
showPrintable behavior only removes action components and beside of this renders the screen as you have it. If the screen you have doesn't show all of the columns then show printable behavior doesn't do either and you may need to look for alternative printing/reporting solutions
Frank

How to print page no/total pges in report programing?

how to print page no/total pges in report programing?

Hi
This is an example:
In TOP-OF-PAGE you can write:
WRITE: SY-PAGNO, '/', '-----'.
When the program has finished to print all data, run a routine like this:
Declare a variable
DATA: L_PAGE_COUNT(5) TYPE C,
      V_LINE TYPE I. "The line where page number is written
* In my example I suppose the page number is always
* written in the first row of the page.
V_LINE = 1.
* Copy this code to the end of program
* Page count will be printed on each page here
WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED.
DO sy-pagno TIMES.
    READ LINE V_LINE OF PAGE sy-index.
    REPLACE '-----' WITH l_page_count INTO sy-lisel.
    MODIFY CURRENT LINE.
    ADD 1 TO sy-index.
ENDDO.
Max

Print all filters defined in a report

Similar Messages

Maybe you are looking for