Print an existing spool in ABAP program.
Hi Experts,
I have a problem to print an existing spool.
I need print many an existing spools in ABAP program
- I used the SHDB and call transaction with BDC data but work only for 1st.
- I tried use the RSPO_RPRINT_SPOOLREQ function but don't work.
I resolved my own problem.
I use the function RSPO_OUTPUT_SPOOL_REQUEST...
The only parameters to this functions was spool_request_id - ID spool.
Thanks for help!
Similar Messages
-
Link between spool request & abap program
Hi all,
I m looking for the link table between a spool request and the corresponding job and abap program.
I want to select all spool requests generated via een job via een abap program.
Some suggestions?
Thanks in advance,Hi,
Spool request is a document for which a print function has been selected. However, it has not yet been output to a printer or another device. The output data for the print document is stored partly formatted in a data store until an output request is created, that is, until it is sent to a particular output device.
The spool system uses a spool request to store the print data temporarily and to access it. The data is stored in a temporary format. You can also display the print document. The system automatically assigns a 10-digit ID number to a spool request.
Spool requests can be viewed via tcode SP01, the number will be there, programatiically it is sometimes populated in the system field SY-SPONO.
It will take input parameters through the selection screen variants and process the code normally as foreground when we are writing the output to list it will generate the spool.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
How can i print data in smartforms from ABAP program.
Dear gurus:
in my abap program i process require data, and saved in a internal table.
how can l print the data in smartforms.?
who can give me a code sample is better:)
reward all helpful advise.Try this....
1) Tcode --> SmartForms
2) Form name --> Z_SF_TEST Create
3) Under Global settings
a) Form Interface
Table Tab
ITAB LIKE EKPO
b) GLOBAL Definitions
WA_NETPR LIKE EKPO-NETPR
In smart forms if we want to display quantity and currency fields. We can't directly display currency field and quantity fields
For that we have to create an extra variable in global definitions
Ex: netpr FIELD of EKPO
CREATE program lines and specify WA_NETWR = itab-netpr.
4) RT CLick on main Window
CREATE --> TABLE
Click Table painter
DEFAULT %LTYPE will be Created
a) If you want more like Header footer etc add by rt click on %LTYPE1
Table (Tab)
%LTYPE Radio(SELECT) 5 CM 5 CM 6 CM
CLICK on DATA (Tab)
INTERNAL TABLE ITAB LIKE ITAB
5)RT click on table control and create --> program lines
General attribute (Tab)
INPUT PARAMETER OUTPUT PARAMETER
itab WA_NETPR
Code Area
WA_NETWR = ITAB-NETPR.
6) RT CLcick on table ctl and create 3 text to display the fields
a) % text1 +button(insert field)
FIELD name &itab-ebeln&
Output options (tab)
Check New line LINETYPE %Ltype1
check new cell
b) % text2
& itab-ebelp&
output options
check new cell
c) % text2
& wa_netpr&
output options
check new cell
<b>Report ac
Tables ekpo.
Data: itab1 like ekpo occurs 0 with header line.
select * into table itab1 from ekpo.
Call function module --> smart form function module and pass your internal table</b>
Regards,
SaiRam -
Finding User Exists in an ABAP program
**How to findout where there is an exit are there in the ABAP Programs.
Thankyou for your time in giving the answers.
Bhaskar.use cmod /smod transaction..
below is demo code to find BADI n user exits for a transaction ( u can go to se93 and create a transaction for ur report program) and then execute this piece of code -
reward if helpfull
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE1 ' AND SKIP FIRST SCREEN.
endcase. -
Print the result of an ABAP Program (in an infoset) in a ABAP List viewer.
Hi ,
Here is my question :
I have created an user group in SQ03
I have created an infoset in SQ02 and a query in SQ01.
In my infoset I have a piece of program which looks like that :
SELECT EVVERTRAG EVBSTATUS EVANLAGE EVVKONTO EV~EINZDAT
EVAUSZDAT EVCOKEY ETABRDATS ETABRVORG ETSPARTE ETTRIGSTAT
ETABLEINH EUIINSTLNINT_UI EUITRANS~EXT_UI
INTO (T_OFB-CONTRAT,T_OFB-STATUT_TRAIT,T_OFB-INSTAL,T_OFB-CMPTE_CONTRAT,
T_OFB-DATE_IN,T_OFB-DATE_OUT,T_OFB-GSR, T_OFB-DATE_CALCUL
,T_OFB-OPE_CALCUL,T_OFB-SECTEUR,T_OFB-STATUT_ORDRE,T_OFB-UNITE,
T_OFB-CLE_PDL,T_OFB-DES_PDL )
FROM ( ever as ev inner join etrg as et
ON evanlage = etanlage )
inner join euiinstln
ON euiinstlnanlage = evanlage
inner join euitrans
ON euitransint_ui = euiinstlnint_ui
WHERE ET~TRIGSTAT = '2'
ORDER BY EV~ANLAGE.
This program works fine, but when I create my query, I can just see the result in abap list.
When I choose "abap list viewer" or "Excel format", the result is more like :
" select * from all tables "
Is there a way to show the result in the viewer ?
I added a "WRITE :/ <column1>, <column2>, but the result is the same.
I also wonder if we can do a "group by " in ABAP.
And do you know how to make a condition " where my_date < today -19 days" ?
Thank you in advance for your answers.
I've been around the others posts and you did such a great job.
Laurent.hi Chintai,
in bw side, you create a abap program to trigger an event in r/3,
and include this abap program in your process chain, the abap program like
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
eventid = 'ZRUNJOB_DEL'
and in r/3 schedule the program to delete previous data with 'after event',
the event name is same as raise by bw process chain, in this sample ZRUNJOB_DEL.
hope this helps. -
How to create Spool through ABAP program
How to create spool request for Smartforms through program. So I can go in TCODE SP01 and see the output of my smartforms.
Include the below code in ur program .......
DATA: PRINT_PARAMETERS TYPE PRI_PARAMS,
VALID_FLAG TYPE C LENGTH 1.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY = 'X' "C_IMMEDIATELY
*LAYOUT = 'Z_48_144'
*LINE_COUNT = '48'
LINE_SIZE = '255'
*NEW_LIST_ID = C_NEW_LIST_ID
NO_DIALOG = 'X'
RELEASE = 'X'
IMPORTING
OUT_PARAMETERS = PRINT_PARAMETERS
VALID = VALID_FLAG
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4 .
G_PDEST = PRINT_PARAMETERS-PDEST.
NEW-PAGE PRINT ON PARAMETERS PRINT_PARAMETERS
NO DIALOG.
List of write statements to be output.......
NEW-PAGE PRINT OFF.
Reward if useful.............. -
Any means to print the output from an abap report immediately
Hi,
I would like to know if there are any means to print the output of an abap program immediately. Our user wants to execute the program online and once the result list is displayed on screen, user wants the same list to be printed simultaneously without the need to press the 'Print' button.
Thanks in advance for your help and advises.
FrancisHi
We can print the list while displaying using NEW-PAGE PRINT ON.
below is the syntax for this.
NEW-PAGE PRINT ON [NEW-SECTION]
[<params> | PARAMETERS <pripar>]
[ARCHIVE PARAMETERS <arcpar>]
[NO DIALOG].
Regards
Ramanjaneya Reddy.
[email protected] -
Hi experts,
may be my problem is to simple, but I can't find an answer in the forum.
I want to print a pdf or pcl (either format will work) on a printer. This printing should happen in an ABAP
program. In this program I get the file via a web service as XSTRING. I also have the destination from the printer in a table from type NAST.
So the question is, what command, program, BAPI, class or whatever can I use to print this file on the
designated printer?
Regards
Torstenhi
check this
http://help.sap.com/saphelp_nw04/helpdata/en/90/78f081030211d399b90000e83dd9fc/frameset.htm
hope this helps
regards
Aakash Banga -
Select alternate tray when printing Adobe form from an ABAP prograram
I had a Smart Form where I printed to an alternate tray for 4 by 7 paper stock. I need to know how to do this in Adobe when printing a from from an ABAP program. I have printer types ZLX4039, HPLJ4 and HPLJ5SI to which I need to print my form to an alternate 4 by 7 tray.
Does anyone know how to set it up in the Adobe form and what I need to do in SPAD to handle it?
Thanks for any help,
James UgrinHi,
Go for the Device type AZPL300 : ZPL300 for PDF Documents only for the Interactive Forms
Take the Help of ur BASIS Team...in SPAD settings
Regards,
Vijaya Lakshmi.T
Edited by: Vijaya Lakshmi on Mar 25, 2009 5:49 AM -
How to see all the columns in the spool output of an ABAP program
I have an ABAP program which displays all the columns when I run it manually. (by scrolling to the right using right arrows). When I run that report in the scheduler and when I see the output in the spool in transaction SP01, it does allow me to go to the right to see all columns.
thanks
RamCheck OSS Note 409339 - Spool requests with ABAP lists with more than 255 columns.
Summary
Symptom
As of Release 4.6x, the ABAP list processor can create spool requests for ABAP lists with a width of more
than 255 columns. However, when you print using the SAP spool, only the start of the list lines is printed,
the rest of the line is truncated at the end of the page.
Other terms
ABAP, lists, print parameter, LINE-SIZE
Reason and Prerequisites
Creating "wide" lists on the screen (in other words, lists in the SAPGUI with more than 255 columns) was
already introduced by the ABAP list processor for Release 4.0B. However, before Release 4.6 these lists
cannot be printed out in the width used on screen.
In older releases (for example, 4.0B, 4.5B), you were not able to generate spool requests for lists with a
width of more than 255 columns:
The system issues error message PT 026: "No. of columns > 255, no standard print-out possible".
Therefore, we did not have the problem described here of non-existing device-type support in 4.0/4.5 for
printing out "wide" lists.
Up to and including 4.6C there are no SAP device types that support print formats for lists with a width of
more than 255 characters). Since Release 3.0A, all SAP device types support a maximum list width of 255
characters with device format X_65_255.
Solution
When you create the spool request and a print dialog box appears, enter a column width of maximum 255
in the "Number of columns" field.
As of Release 4.6D, you have the option of using device type SWIN with the new format X_65_1024/4 when
printing with Windows (see Note 213382). -
Program to Print Preview from Spool
Hello gurus,
I hope you guys could help me out...my requirement is to write an ABAP program that receives a spool number and displays its print preview to the user from there user can choose to print or delete the spool number
Any advices ?:)Hi ..
Call this FM to generate the Print preview from SPOOL
CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
EXPORTING
spool_request_id = hrqident
EXCEPTIONS
OTHERS = 0.
<b>REWARD IF HELPFUL</b> -
Newbie question: Send data to printer from ABAP program
Hello, I am a newbie.
I do not use SAPScript nor SmartForms.
But I need to send a printer command stream from my ABAP to printer.
Is it possible?
How can this be possible? Please give me some guideline.
I will reward you points. Promise.
Thankshi,
u can send ur program details to printer using submit to sap-spool statement.
SUBMIT TO SAP-SPOOL
Basic form
SUBMIT rep ... TO SAP-SPOOL.
Extras:
1.... DESTINATION dest ... COPIES cop
... LIST NAME name
... LIST DATASET dsn
... COVER TEXT text
... LIST AUTHORITY auth
... IMMEDIATELY flag
... KEEP IN SPOOL flag
... NEW LIST IDENTIFICATION flag
... DATASET EXPIRATION days
... LINE-COUNT lin
... LINE-SIZE col
... LAYOUT layout
... SAP COVER PAGE mode
... COVER PAGE flag
... RECEIVER rec
... DEPARTMENT dep
... ARCHIVE MODE armode
... ARCHIVE PARAMETERS arparams
... WITHOUT SPOOL DYNPRO
2. ... SPOOL PARAMETERS params
... ARCHIVE PARAMETERS arparams
... WITHOUT SPOOL DYNPRO
3. ... Further parameters (for passing variants)
are described in the documentation for SUBMIT
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Missing print parameters with SUBMIT.
Effect
Calls the report rep with list output to the SAP spool database.
Additions
... DESTINATION dest(output device)
... COPIES cop(number of copies)
... LIST NAME name(name of list)
... LIST DATASET dsn(name of spool dataset)
... COVER TEXT text(title of spool request)
... LIST AUTHORITY auth(authorization for display)
... IMMEDIATELY flag(print immediately ?)
... KEEP IN SPOOL flag(keep list after print ?)
... NEW LIST IDENTIFICATION flag(new spool request ?)
... DATASET EXPIRATION days(number of days list
retained)
... LINE-COUNT lin ( lin lines per page)
... LINE-SIZE col(col columns per line)
... LAYOUT layout(print format)
... SAP COVER PAGE mode(SAP cover sheet ?)
... COVER PAGE flag(selection cover sheet ?)
... RECEIVER rec(SAP user name of
recipient)
... DEPARTMENT dep(name of department)
... ARCHIVE MODE armode(archiving mode)
... ARCHIVE PARAMETERS arparams(structure with archiving
parameters)
... WITHOUT SPOOL DYNPRO(skip print control screen)
With the parameters IMMEDIATELY, KEEP IN SPOOL, NEW LIST IDENTIFICATION and COVER TEXT, flag must be a literal or character field with the length 1. If flag is blank, the parameter is switched off, but any other character switches the parameter on. You can also omit any of the sub-options of PRINT ON. mode with SAP COVER PAGE can accept the values ' ', 'X' and 'D'. These values have the following meaning:
' ' : Do not output cover sheet
'X' : Output cover sheet
'D' : Cover sheet output according to printer setting
armode with ARCHIVE MODE can accept the values '1', '2' and '3'. These values have the following meaning:
'1' : Print only
'2' : Archive only
'3' : Print and archive
arparams with ARCHIVE PARAMETERS must have the same structure as ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS.
Effect
Output is to the SAP spool database with the specified parameters. If you omit one of the parameters, the system uses a default value. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... TO SAP-SPOOL WITHOUT SPOOL DYNPRO
You could use this option if all the spool parameters have already been set!
Note
When specifying the LINE-SIZE, you should not give any value > 132 because most printers cannot print wider lists.
Addition 2
... SPOOL PARAMETERS params(structure with print
parameters)
... ARCHIVE PARAMETERS arparams(Structure with archive
parameters)
... WITHOUT SPOOL DYNPRO(skip print parameters
screen)
Effect
Output is to the SAP spool database with the specified parameters. The print parameters are passed by the field string params which must have the structure of PRI_PARAMS. The field string can be filled and modified with the function module GET_PRINT_PARAMETERS. The specification arparams with ARCHIVE PARAMETERS must have the structure of ARC_PARAMS. This parameter should only be processed with the function module GET_PRINT_PARAMETERS. Before output to the spool, you normally see a screen where you can enter and/or modify the spool parameters. However, you can suppress this screen with the following statement:
... WITHOUT SPOOL DYNPRO
Example
Without archiving
DATA: PARAMS LIKE PRI_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LT50'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
WITHOUT SPOOL DYNPRO.
ENDIF.
Example
With archiving
DATA: PARAMS LIKE PRI_PARAMS,
ARPARAMS LIKE ARC_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LT50'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
SAP_OBJECT = 'RS'
AR_OBJECT = 'TEST'
ARCHIVE_ID = 'XX'
ARCHIVE_INFO = 'III'
ARCHIVE_TEXT = 'Description'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
OUT_ARCHIVE_PARAMETERS = ARPARAMS
VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
ARCHIVE PARAMETERS ARPARAMS
WITHOUT SPOOL DYNPRO.
ENDIF. -
How to trigger an existing background job in ABAP program?which fm?
Hi experts,
how to trigger an existing background job( defined in SM36 ) in ABAP program?which fm?
seems that FM 'JOB_OPEN' / 'JOB_SUBMIT' / 'JOB_CLOSE' can only create a new job.Hi,
now my requirement is that sap has generated one job automatically, and then i will have a job name
'XXX'. and then i want to schedule the job in abap program,. which function module could i use ?
my expected fm is that the system will trigger the job after i give the job name and start condition.
i have tried job_open, but it seems just to create a new job. any advice ? -
Copy the existing output rom Z program into a spool file
Hi all,
There's a Zprogram if its run in foreground a list gets created .(as per req, i want this list in a spool file and not the below spool file)
If this program is run in background a spool file gets created.
I dont want the existing spool result instaed i want the other result which is generated via se38 as a spool file.
Pls suggest.
One more question is i don't see any code in program where the existing spool file is written.similarly i have checked another program earlier where i dont see the code where exactly spool file gets created ,moreover no sub programs in that too.
Thanks for the help.Hi ,
I don't want existing spool data.
But i need the list in foreground run to be saved as the spool file.
will commenting out the statements which writes to current spool file(yet to identify this part of the code) be a good option
Or,
If i can create another spool file ,how to do it.
basically how to create 2 spool file in the same program,1 spool is already getting created..
Thanks, -
How to print external file using ABAP program
Hello
I want to print an external file which is located in server (
20.99.0.18\GUI\xyz\8.0QUALITY\QM_TS.DOC) .....i want to print these kind of files(which i have retrieved from table 'DRAW' field 'filep' )......i need to print these files using ABAP program.
thank you
Vikram.
Message was edited by:
Vikram Bojjaextract the data and pass to script or smartform for printing
Maybe you are looking for
-
Apple store returns my MBP17 with a new logicboard but broken dvd & battery
i posted here before http://discussions.apple.com/thread.jspa?threadID=2383997&tstart=0 this is regards to MBP17 2006 NVDIA defected card return policy as prior thread title states, the computer fell under the coverage once the video card died, apple
-
How to map XML to Web Dynpro context nodes?
Hi All, Could anyone tell how xml string can be bound to context nodes ? In my requirement i need to serialize context nodes value to string and deserialize it back to nodes for implementing back naviagtion between views. I didnt see much threads ach
-
Sliding panels hidden content on page load, SprySlidingPanels.js
There was a previous post about the issue of hidden content flashing on page load. That issue was solved with a "hideGroup" class and an additional line in the JS file under the addEventListener lines. My sliding panels JS file isn't as simple and I
-
We are busy developing a desktop application which uses the Lync 2013 client SDK. One of the features is to dock the conversation window of the Lync client into our own app. At the moment, this is working but the flow is not ideal: The (incoming) con
-
CS2 and Leopard. Place image crashes program
I installed Leopard (latest updates) yesterday. Everything is playing nice except IDCS2 that crashes when I try to place an image into an existing CS2 doc.. So many of my clients are only CS2 compatible, so must work on their docs in CS2. I accidenta