Print code

hi,
i am developing java editor.........its almost complete...
i want to put the functionality of print the page.......plz
tell me if u know or send sample code to implement......
take care.........
good bye...

Have you looked at the Java Print interface?
http://access1.sun.com/tools/JPSDemo/jpsdemo.html
http://java.sun.com/j2se/1.4/docs/guide/jps/spec/JPSTOC.fm.html
or search for it. There is a new and old way of doing this, so it is a little harder to figure out what is happening.
Isaac

Similar Messages

I cant find the printer code on my HP deskjet 3050 J610 all-in-one printer

I have disconnected wireless and turned off printer and turned on and re connected. I have changed DNS to 8888 and secondary to 8844. I have printed out 5 Network configuration pages and 4 Printer status reports and NOTHING has the printer code on it. How can I get one? Thanx, Anna
This question was solved.
View Solution.

Hi Anna,
I afraid the Deskjet 3050 (J610) does not support any web service as ePrint or Print Apps.
Only the Deskjet 3050A (J611) support ePrint as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en&product=5063582&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet Pro 100 Color MFP M175 expired printer code

When signing on to eprintcenter.com it says my printer code is expired. When I try to print an information sheet from the printer it says it is 'Downloading from the Web', but then just goes back to Ready without printing.

Hi TerriLG,
The printer code that was generated is only good for 24 hours. So you will need to disable and then re-enable Web Services to get a new printer code. Make sure and register the new code right away or it too will expire.
On a Laserjet, you will need to access the EWS (embedded web server) for the printer. To do this, find the IP address of your printer and enter that address in your web brower on your PC. There should be a "Web Services" tab within the EWS.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Where do I find the "printer code" on a HP Officejet pro 8500 A910?

Operating Windows 7

Welcome to the HP Forum!
lrs5 wrote:
Operating Windows 7
What exactly do you mean by "printer code"
Do you mean product name or product number instead?
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

On my hp officejet pro 2000 wireless, how do I find the "printer code" so I can set up eprint??

printer is installed and working well, but I want now to set up eprinting so I can print from my ipad. i have installed the free app on my ipad, but seems I also need to enter a printer code to set it up. the 2000 does not have a screen so I cannot see any info there. How can I discover the printer code?

How old is the printer? I am not finding any support paged for the Officejet 2000. Here is a link to a document that goes over the supported printers for cloud services. There is a dropdown for HP Officejet products, click on that drop down and it will produce a chart that will show which models are capable of ePrint and other cloud services. I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

How to enter printer code into new eprint acount. first acount was deleted. (photosmart 7510)

I eneterd my printer code into my eprint account, then mistakenly deleted the account. I set up a new account, but now I can't add the printer. I get the message "invalid code". The printer is a photosmart 7510.

You may need to disable and then enable Web Services from your printer to get a new printer code and then register that code.
I am an HP employee

How to reset "Add Printer" code on 6500a? The original one generated expired and site won't accept.

What are the exact steps to reset the "Add Printer" code\email for the OfficeJet 6500a?
I set up the wireless portion and was generated a code, however trying to register and enter it into the website, it will not accept stating that is has expired (being after the 24 hour time frame).
Thus, I attempted to find the options to "generate" a new one, and it doesn''t seem to exist. I reset all wireless settings to default, and attempted to find the code -- and it remains the same.
What are the exact step by step clicks I need to press on the printer to get a new code that will be accepted by the ePrint website?
Thank you in advance for your insight.

Hi mcseqt,
You can just reprint the instruction page and you will be able to add the printer code again within 24 hours.
To do so, go to Setup >> Web Services Setup >> ePrint Email Address
This will print out the eprint instruction page again.
Thank you.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

My webpage created with php prints code instead of the created webpage

My webpage is created using dynamic field therefore it had to be save as .php.
The problem now is when i want to print the page it prints code instead of the actual page. Is the a solution for this problem?
Here is the site
http://www.pianoandkeyboardshoponline.co.uk/Test/
Any help welcome

I think you're confused by what you're seeing.
When I print > preview your on-line page in Firefox, I see the page content and links -- which may look like code to you, but they're not revealing anything abnormal.   These are just links to other pages.
detailed_page.php?product_id=307-Yamaha-P105-Digital-Piano-in-White
You have these external style sheets but they are designated for screen & projection media only.
<link rel="stylesheet" type="text/css" media="screen, projection" href="style.css" />
<link rel="stylesheet" type="text/css" media="screen, projection" href="jcart/css/jcart.css" />
Your print styles are actually driven by boilerplate.css towards the bottom of the page.
/* ==|== print styles =======================================================
   Print styles.
   Inlined to avoid required HTTP connection: h5bp.com/r
   ========================================================================== */
@media print {
* { background: transparent !important; color: black !important; text-shadow: none !important; filter:none !important; -ms-filter: none !important; } /* Black prints faster: h5bp.com/s */
a, a:visited { text-decoration: underline; }
a[href]:after { content: " (" attr(href) ")"; }
abbr[title]:after { content: " (" attr(title) ")"; }
.ir a:after, a[href^="javascript:"]:after, a[href^="#"]:after { content: ""; } /* Don't show links for images, or javascript/internal links */
pre, blockquote { border: 1px solid #999; page-break-inside: avoid; }
thead { display: table-header-group; } /* h5bp.com/t */
tr, img { page-break-inside: avoid; }
img { max-width: 100% !important; }
@page { margin: 0.5cm; }
p, h2, h3 { orphans: 3; widows: 3; }
h2, h3 { page-break-after: avoid; }
Perhaps that's why what you see in print doesn't match what you see on screen.
If you want a print out of the screen display, do a screengrab with your print screen key. Paste content it into your favorite graphics editor.
Hope this helps,
Nancy O.

How do I print code in Dreamweaver CC?

I've just upgraded to Dreamweaver CC and I seem to be blind.
I cannot find an option to 'print code'. Where is it?

Hi,
Based on a number of requests from users through Wishlist and forums, the Print Code option is introduced back in Dreamweaver.
Fix for this is available through the latest update 13.2. This update is live now, please install & provide feedback.
For more info, please look at: http://helpx.adobe.com/dreamweaver/using/whats-new-dreamweaver-13-2.html
Thanks,
Shambu

LT31 - Default print code at User Level

Dear All,
Is it possible to default PRINT CODE(Print control data) in LT31 t-code at user level. Thanks in advance.
Regards
Ramprakash

In WM is in general no user-specific printing, but SAP offers 2 workarounds see the details in the KBA 1847818 - Unable to assign a specific printer to a user when printing Transfer Orders in WM

HOW CAN I GET TO THE PRINTER CODE?

HP Officejet 6500A printer - Windows XP. The problem is I am trying to set up ePrint and printing from mobile devices, etc. and I am unable to find the printer code. The printer was previously setup for use from the desktop and now I am having difficulties adding these other capabilities.

The thread here should help:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Where do i get my eprint printer code on the deskjet 3050a?

So long story short, I moved and now I cannot get my printer to work at all. I think I finally got it back online, but I had removed it from my hpeprint.com account so now I need to re-add it but cannot find the code. I have the Deskjet 3050a. I'm worried about internet connectivity because I hit the eprint button and went to "print information page" hoping the code was on that, and all it does is say "downloading page" and then it never prints.

These steps typically resolve the issue:
1. Press the ePrint button on the printer's front-panel screen, then press "Print Info Page".
2. Head over to the ePrintCenter website (http://www.eprintcenter.com/), and log in (or sign up for a new account if you don't have one).
3. Click the "+Add Printer" button and enter the printer code from the ePrint info page (“Print Report” page from step 1). Create a customized ePrint email address.
If that does not work and it never prints follow the steps below:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the network icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
5. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
6. Click on IPv4 under the correct connection (wired or wireless) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

PRT file doesn't work (printer codes) (urgent)

Hi,
I've got a small problem using a custom prt file for printing reports on a Epson TM-T88 printer.
I'm trying to use the printer codes which are in the programming manual of the Epson printer for cutting the paper.
But it doesn't work.
This is the prt-file:
printer "kassabon"
before report esc "@"
after report dec (27) dec (86) 1 dec (27) dec (105)
Who can solve this problem?
It's very urgent.
Thanks in advance!
null

Nobody?

How do you change the FILE "print code" resulting printed font size?

I would like to adjust the "Print Code" resulting printed document font size. Though the changes can be made in display font for the Code window via a file or the Preferences Menu, I cannot find the style information to change the Print Code.
Thanks

Thanks again for your reply.
I would like the code print out font to be a smaller size. Currently, it ls printing at 12 pt Monaco ( I can emulate this exactly by printing the same document in an editor set as Monaco 12pt ). However, the settings (see below) are set at Monanco 9pt. This works on the screen, but not for printing.
http://goo.gl/eXhnz > screenshot of Setting show "smallest".
Yet the code:print gives me more characters per line, resulting in many more pages per printout. The "print preview" shown in my last message is exactly what the printed page looks like as well.
NOTE: with the same settings ("smallest Monaco 9pt), Dreamweaver CS3 on OSX *does* code:print the smaller size, though without color coding. Dreamweaver CS 5 on my system does not.
Thank you.
Jay

How do i find a printer code of laserjet cp1025nw

My printer is LaserJet CP1025nw
How do I find my printer code ?
My product serial number is : CNBGC23476

Hi,
As of now, the ePrint feature is not supported for your printer.
you may find the supported printers listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en&product=4083871&tmp...
As much as i know, your model should get an ePrint functionality with future firmware update, however i don't know of any estimated time for it.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have signed up for eprint and have a printer code, but it is being rejected.

I want to be able to send photos from my cell phone to my printer to print...I have signed in and have a printer code, but it is being rejected. What do I do next? What is my printer email address?

Did you first enable Web Services on the printer? That has to be the first step before trying to sign in.
JTR

Print code

Similar Messages

Maybe you are looking for