Print date with milli seconds

I want to print the sysdate with milli seconds also
Please help me

Hi
I also have come up with the same requierment. But we
are not to use the SYSTIMESTAMP. Is it possible to
get miliseconds info using SYSDATE only?
I have tried to search on SQL User guide, they give
their date and time element formats like 'mm/dd/rrrr
hh24:mi;ss:ff' but the format mask :ff works only for
the timestamp variable like SYSTIMESTAMP not for
SYSDATE or date variables.
Thanks
regards
AbhivyaktiHi,
They are correct. Read a bit more about DATE and TIMESTAMP and you will clearly see why you can't have milliseconds on a simple DATE datatype.
hth,
Guido

Similar Messages

How to include print date with time on SkillBuilders Schedule Plug In?

Hi,
Do you have an idea how to include and get the print date with time on the SkillBuilders Plug In? It shows me the date only, time not included. Have tried to put "HH24:MI", "HH24MI" or Tochar(HH24:MI)? No result??
select p.fullname, sbip_schedule.start_date(e.event_schedule) start_date
, sbip_schedule.end_date(e.event_schedule) end_date
, sbip_schedule.duration_seconds(e.event_schedule) duration_seconds
, sbip_schedule.calendar_summary(e.event_schedule) calendar_summary
from app_events e
Thanks!

I forget to clarify I am looking for the answer is how to get the print of date with time, Start date with time and End Date with time.

How to print date with prefix in oracle reports?

Hi Everyone,
Please help to get solution for this problem.
How can we generate View image: oracle Reports in Oracle Reports RDF ?
we can print date , but i want to print date and st in smaller case and in top right side of date.
for eg 31st st should be small and in top right part.
Please refer the image : i have inserted link for image.
Thanks in advance,
HP

You just go into the paper layout---> ...
No, first step is to ask the question in the Reports forum :-)
Edit: TIP: How to find a forum or community

Printing data with tab spacing

I have a data file in simple text format where data are oriented in three columns (i.e. time, voltage and current) separated by 'tab' marks. Whenever I am trying to print the document in Java Application (jdk1.2.2) it is not recognizing the tabs, and putting a square sign with a single space in place of 'tab mark' in printing.
What I have to do to print the data in columns separated with tabs?
Avijit

Simple. when you are doing:
System.out.print("Your text here");
You can add tabs between by doing the following:
System.out.print("Your \ttext \there");
Look closely, I added "\t" .

Printing Date with Calendar Object

I am trying to print the current date of a calender object in a mm/dd/yyyy format.
When I call system.out.println(now.getInstance()); and scroll through the console, it shows DAY_OF_MONTH=29, YEAR=2006, MONTH=6 for July 29, 2006. I realize months are zero based, so month is really 7. My question is, why does:
System.out.println(now.MONTH + " " + now.DAY_OF_MONTH + " " + now.YEAR);
print 2 5 1.
Logic tells me it should print 6 29 2006.
I have searched previous posts, and couldn't find one that answers my question. How do I take a Calendar object and print its current set date?

My question is, why does:My question is: why do you care how a Calendar stores its data? If you want to print it, get a Date instance from it and run it through a SimpleDateFormat to get a String representation of the date.
Don't mix up data and presentation.
And to answer your question: you don't print the Calendar's date attributes, but the values of some static constants.

Coulun values shuffle while printing data with FM REUSE_ALV_GRID_DISPLAY

HI Experts,
I am using FM REUSE_ALV_GRID_DISPLAY to display values using ALV Grid.
My requirement is to add the new column UOM price at 7th of field catalog. In order to get UOM price, I added UOM Price in field catalog and OUTTAB at position 7. When I passed the value to FM REUSE_ALV_GRID_DISPLAY, I am getting value of 6th column displayed on 7th as well.
Even though I have different set of data in column 7 of OUTTAB, I am getting 6th column value. Kindly suggest what else I need to do.
Thanks,
Krishna.

Why not,
TYPES : BEGIN OF ty_outtab,
        kunnr    TYPE kunnr,
        payer(10) TYPE c,
        name1(35) TYPE c ,
        matnr TYPE matnr ,
        bukrs(4) TYPE c ,
        menge TYPE Menge,
       space1 TYPE char20,
        uomprice TYPE uprice_kr,
        meins TYPE j_1imeins,
        netprice TYPE netprice,
        vrkme TYPE vrkme,
        value TYPE -value,
        waers TYPE waers,
        invoice(10) TYPE c,
END OF ty_outtab.
PERFORM field_catalog USING 'KUNNR' text-004 10.           " PREPARE FOR RECORD NO
PERFORM field_catalog USING 'PAYER' text-018 10.            "Payer "Defect 20492 NA15480
PERFORM field_catalog USING 'NAME1' text-005 35.           " PREPARE FOR COMPANY CODE
PERFORM field_catalog USING 'MATNR' text-006 18.           " PREPARE FOR GL ACCOUNT
PERFORM field_catalog USING 'BUKRS' text-007 5.           " VALID FROM
PERFORM field_catalog USING 'MENGE' text-008 17.           " VALID TO
*PERFORM field_catalog USING 'UPRICE_KR' text-021 20.    " UOM price newly added column*
   PERFORM field_catalog USING 'MEINS' text-25 20.
PERFORM field_catalog USING 'NETPRICE' text-25 20 .
PERFORM field_catalog USING 'VRKME' text-020 17.
PERFORM field_catalog USING 'VALUE' text-26 20.
PERFORM field_catalog USING 'WAERS' text-27 20.
PERFORM field_catalog USING 'INVOICE' text-015 10.           " REASON
FORM field_catalog USING p_lv_fieldname TYPE slis_fieldname p_lv_text TYPE slis_text40 p_len TYPE dd03p-outputlen.
gv_count = gv_count + 1.
CLEAR gs_field.
gs_field-fieldname = p_lv_fieldname.
gs_field-col_pos = gv_count.
gs_field-seltext_m = p_lv_text.
gs_field-outputlen = 20. "Defect 20492 NA15480
gs_field-outputlen = p_len. "Defect 20492 NA15480
APPEND gs_field TO gt_field.
CLEAR gs_field.
ENDFORM.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = sy-cprog
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_bypassing_buffer                = gc_x
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
     it_fieldcat                       = gt_field[]
IT_EXCLUDING                      =
     i_default                         = gc_x
     i_save                            = gc_a
IS_VARIANT                        =
    TABLES
     t_outtab                          = gt_display[]
    t_outtab                          = gt_outtab[]
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2        .
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Xp20:format-dateTime with milli seconds always as zeroes

Hi All,
I am trying to use the xPath function format-datetime , but in the output factional seconds is returning all zeroes. My picture string looks like below.
*xp20:format-dateTime(xp20:current-dateTime(),"[H01][m01][s01][f001]*
Result always in zeroes see example below:
*105017000*
Do somebody have some advice on this issue?

Use ora:getCurrentDateTime() extension function instead... It accepts java SimpleDateFormat patterns and it is able to go milliseconds...
Cheers,
Vlad

I have install wamp server one my first laptop and and i access data with my second laptop. i have connected both pc's with internet wire but it show some error"enable to connect mysql server " plz help me

string wire = " Persist Security Info=False; server=xain; port=3307; database=test;username=root;password=";
string query = "insert into test.server_base values('" + textBox1.Text + "', '" + textBox2.Text + "')";
MySqlConnection condatabase = new MySqlConnection(wire);
MySqlCommand cmd = new MySqlCommand(query, condatabase);
MySqlDataReader myreader;
try
condatabase.Open();
myreader = cmd.ExecuteReader();
MessageBox.Show("Good");
condatabase.Close();
catch (Exception xe)
MessageBox.Show(xe.Message,"na g na");
/*server=xain is a server name assing in which database is install */

Hi sohail.
As you title mentioned wamp server, for WampServer is a Windows web development environment. It allows you to create web applications with Apache2, PHP and a MySQL database. This is third-party software. I
am afraid this is out of our support. I would suggest you to ask in their
official forum. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Get Time Stamp will milli seconds from string time stamp format

Hi Guys,
I am trying to get the time stamp with milli seconds value from string format time data,
Attached the snippet (Get milli seconds to Time stamp)I tried.
Attached Sub VI Convert string to time stamp
When run,I am not getting the time string indicator with milli seconds value even though the format have <%2u> .
please guide me on this.
..AND Finally i will be converting the date and time string output to time stamp data type
Attachments:
Convert_String_to_TimeStamp.vi ‏13 KB
Get Milli seconds to Time stamp.png ‏25 KB

You do realize you could have just used a single Scan From String to get the timestamp, right?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Get Timestamp.png ‏43 KB

Log timestamp to include milli seconds

Hello there,
I want to see the log time stamp with milli second in it.. how do i do? I would like to see time stamp '29/Apr/2015:01:43:21:<ms> -0400'
example logs..
[29/Apr/2015:01:43:21 -0400] conn=600150 op=162 msgId=163 - SRCH base="o=domain.com" scope=2 filter="(&(uid=29april2015)(objectClass=*))" attrs="uid objectClass"
[29/Apr/2015:01:43:21 -0400] conn=600150 op=162 msgId=163 - RESULT err=0 tag=101 nentries=1 etime=0.000000
thanks

Hello,
It is possible to configure ODSEE to log etimes in microseconds (by settig access log level 131072=Precise timing of operation duration.) .but I don't think it is possible to change the timestamp format.
-Sylvain
Please mark this response as correct or helpful when appropriate to make it easier for others to find it

Need milli seconds part in XSLT Date Function current-dateTime()

Hi All,
I am calling date function, current-dateTime() in XSL. The output format is 2012-04-05T16:38:01-07:00 (Without milli seconds)
How to get the milli seconds part...?
Regards,
Sudheer

Hi Arik....
At last i got it. :)
Followed the below steps.
Step1:
Created a String variable "currentDateTimeValue" in BPEL.
Step2:
I have used the below code in JavaEmbedding in BPEL.
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat();
//Date Pattern looks lil weird. But some Web service accepts only this format.
sdf.applyPattern("yyyy-MM-dd'T'HH:mm:ss.SSS'-00:00'");//2012-04-14T16:24:00.578-00:00
String formattedDate = sdf.format(new java.util.Date());
addAuditTrailEntry("Formatted datetime string is: " + formattedDate);
setVariableData("currentDateTimeValue", formattedDate);
Step3:
Created a Simple XSD with an element "DateElement" of String type.
Step4:
Assigned "currentDateTimeValue" value to "DateElement" element, in Assign activity.
Step5:
Now added this DateElement in Transformation activity, as a second source variable. Mapped this data to the required target element in my XSL.
uh-huh I got the output...
Thanks a ton ARIK :D u r really helpful...
Regards,
Sudheer

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

Printing photos with dates

Is there any way to have the date and time when a photo was taken displayed on the prints?

swinguy:
Welcome to the Apple Discussions. Not with iPhoto. I believe there's a 3rd party application that will do that based on either the Capture Date or Created date. Don't know about the time though. There was also mention of an online photo finisher that would print the date on the back of the print. The app might be Portraits & Prints. I don't remember exactly. Do a search in this and the Printing and Book Ordering forum for "print date" or similar. I believe it was lori_diloreto who had the information. You can limit the search to posts by her.

Print photos with date stamp on them with a HP 6600

Does anyone know if the HP6600 printer is capable of printing photos with the date stamp on them?

Hello @Joseph_TX ,
Welcome to the HP forums.
I understand that you want to know if a way to configure the HP ePrint.
I would like to help.
Unfortunately there is no way to reconfigure the ePrint.
When you send an email to the printers ePrint address, it will print the body of the email and any attachments.
It will not print the subject line or who the email is from.
Also the ePrint feature will not resize pictures sent.
What you send is what you get.
You can get more control over ePrint with the ePrint app, but I don't believe that will suit your needs.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Print date with milli seconds

Similar Messages

Maybe you are looking for