Print information into top_of_page using set_table_for_first_display

Hello
I create a break into my page with sort information. I do the break into account changed.
When we print the document for each page, I would like to print the account in reference. The trouble is that i do not find how to keep this information into my header. I print already a header but it's the value i cannot catch.
Someone can help me ?
Thanks
Philippe

but i hav created a structure in my code
DATA : BEGIN OF s_final ,
    flief LIKE plaf-flief,
     name1 LIKE lfa1-name1,
     land1 LIKE lfa1-land1,
     matnr LIKE eban-matnr,
     maktx LIKE makt-maktx,
     lfdat LIKE eban-lfdat,
     delb0 LIKE t457t-delb0 ,
     ebeln LIKE ekpo-ebeln,
     ebelp LIKE ekpo-ebelp,
     menge LIKE ekes-menge,
     meins LIKE eban-meins,
     labnr LIKE ekpo-labnr,
     zintct(30) TYPE c ,
END OF s_final .

Similar Messages

How to print form into pdf format using smart forms in abap

please let me know how to print form into pdf format using smart forms in abap.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

Hi ,
refer this link
<removed by moderator>
Regards,
Dhina..
Moderator message: please do not reply to questions that violate forum rules.
Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

Hello! I use photoshop CS3. recently, after logging information into FILE INFO, I am unable to close out that window. I am able to save & close the image I am working on, but the window remains. I then must close out of Photoshop completely and reopen to

Hello! I use Photoshop CS3 and Yosemite. Recently, after logging info information into the FILE INFO panel, I am unable to close out the window. I am able to save & close out the image, but then I have to completely close Photoshop and re-open the program to work on a new image. Frustrating! Any help to remedy this problem? Many thanks!

Try resetting the Photoshop preference file: Press and hold Cmd+Opt+Shift and start Photoshop. Select "yes" when asked if you would like to continue with reset.
Benjamin

Logging into eFax using HP Envy 114 Printer

I can't log into efax using my HP Envy 114 Printer. I know the numbers are valid because i am able to log into the efax website. I can't find any answers for this problem on their website. Any suggestions?

Check out this thread:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Quick-Fix-For-Most-eFax-Issues-Photosmart-7510...
You should be able to find the answer you are looking for there. But if you are continuing to have issues, please let me know and I'll see what I can do for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Inserting Information into Existing Custom Data Object Using API?

Hello,
I have setup a Custom Object and I have the ID for this object. All we're wanting to insert in this object is First Name, Last Name, Email. I have that information in code-form and I have both the BULK API and REST api at our disposal. We are having issues figuring out the API call we want to execute to insert this information into this Custom Object.
If someone could point us in the right direction that would be amazing. Thank you!

I solved the problem.
when we are selecting the image data from access database select that as getbytes
          while(rs.next())
               count++;
               picbarray = rs.getBytes("PICTURE");
when inserting to the oracle db
PreparedStatement st1 = null;
String sql = "insert into (colmn1,colmn2,colmn3,comn4,colmn5) values(?,?,?,?,?)";
st1 = con.prepareStatement(sql);
st1.setString(1, val1);
     st1.setString(2, val2);
     st1.setString(3, val3);
     st1.setBytes(4, picbarray);
st1.setString(5, val5);
     st1.executeUpdate();

How to print text on container using oop on alv list

Hello Guru's,
         pl guide me how to print text on container using alv list-display which have interactive events using     oop classes/methods ...
                I want to print hard coded text on coantainer , on double clicking it will call another screen.
Pl Help..
Message was edited by:
        paresh sonavane

Hi Paresh,
       1.      Go to the Layout and Create One custom container box and give name it.
        2. Custom Container is the one type of tool and its used for Displaying the Reports
            with the use of ABAP Objects.
        3. Go to se38 and Write The Following Code.
tables ZTEAM_GD.
DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET       .
SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
CREATE OBJECT OBJ
EXPORTING
    CONTAINER_NAME              = 'ALV'.          -
> Give ur Container Name
CREATE OBJECT OBJ1
EXPORTING
    I_PARENT          = OBJ.
CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
    I_STRUCTURE_NAME              = 'ZPLAYER_BAT_DET'
CHANGING
    IT_OUTTAB                     = IT_TEAM.
*CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
EXPORTING
   I_STRUCTURE_NAME = 'ZTEAM_GD'
CHANGING
   IT_OUTTAB        = IT_TEAM.
CALL SCREEN 9000.
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
WHEN 'EXT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPU
Thanks.
Reward If Helpful.

The saved printer information is not compatible with this version of Photoshop

Hello,
I hope somebody can help us. I am a IT Technician in a school, we have approx 500 Windows 7 64bit machines with about 600/700 users - 200 machines have the CS5.5 Master Collection installed on them. We have an intermittent issue with printing from Photoshop (both the 32bit and 64bit versions). Our printers are mostly HP LaserJet printers (all modern), but we have an Epson B-510DN Inkjet and some Xerox copiers too. The drivers are all installed on a central print server running Server 2008 R2 and shared via Group Policy to client machines.
In rooms where Photoshop is installed, intermittently when a student goes to print we will recieve the following error:
The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing.
Photoshop will then grey out the 'Print' button and won't let the user print again. The odd thing is that we can still print from other software such as Microsoft Word or even non Microsoft software - even Illustrator will print. It just seems to be Photoshop thats has any issues.
This happens when printing to any printer on site, 90% of which are HP's. As a general rule we configure all of our HP printers with HP's PCL6 Universal Print Driver as it makes management of various printer models easy, and we haven't found it to limit us atall yet. We are aware the Adobe software is 'preferential' to Postscript drivers but our printers arn't, being HP's PCL is their native language. We have tried changing a printer to the Postscript UPD driver to test it but it made no improvement. We have also seen the issue quite indepth with our Epson B-510DN which is configured with Epson's latest model specific driver as our photography department use it. Since we are seeing it with different printers I don't believe the printer drivers are to blame - unless somebody want's to prove me wrong.
Like I say the problem is intermittent, and we are having trouble tracing it down to a user, computer or a software problem as it is so intermittent. Has anybody else seen this and managed to overcome it? Since it's only happening in Photoshop is it a bug that Adobe have recognosed and fixed in CS6? The only workaround we have found for it is to go into printers, chnage the defualt printer from one to another and back again - this seems to shut Photoshop up.
Thanks, Dave.

Chris,
Apologies for my slow reply - we have been busy here the past few weeks.
We are using a standard Microsoft provided JPG image (Tulips.jpg) so we have ruled out it being an issue with the image; perhaps if we were using a PSD, maybe so.
We have now found out what the issue is, and what the workaround for this bug is. All of our printers across our site are named in a specific format, usually [Location name] [Room number] [Mono or Colour] resulting in printer names such as Photography A11 Colour, Art A2B Colour and Design Technology A14 Colour. All of these names contain numbers. We have tried reimaging machines, reinstalling Photoshop, upgrading to CS6, deleting and reconfiguring printers with the same name. Finally the only solution that worked was to take the numbers out of the name, either by renaming or deleting and reconfiguring the printers. The Photography printer is an Epson B-510DN using a model specific driver and the other two use the HP PCL6 UPD driver, so I don't believe the drivers are to blame and since renaming the printers work I don't believe it's a configuration issue either. Remember that these printers are shared from a print server and deployed via Group Policy (using the Print Management method).
I hope this provides you Chris, and others searching Google, a useful explanation of the problem and what the fix is. As much as Adobe won't admit it's a problem/bug, I and many others across the internet believe that it is and that it should be fixed in future versions of Photoshop.
Thanks, Dave.

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

Error in importing image into SAP using SE78

Hi to all,
I was trying to upload a '.bmp" image into SAP using SE78 but I failed.
Se78 -> BMAP Bitmap Image -> Graphic -> Import -> Specified the complete path ->given name desc and type .
Ended up with the following message.
Graphic TRF_LOGO_REV could not be saved
(2TRF_LOGO_REV)
Pls. help as I am not sure whether I missed any step.
Thankx in advance.

Hi,
Go to SE78 Transaction ie Aministration of form graphics,
       there select GRAPHICS General Graphics,under this BMAP Bitmap Images will come.
       select that,then a sub window will appear.
There give the name of your logo and select the import button which is at the extreme left.
       Then again a sub window appears,there give the path name and name of the logo,and some description then press enter.
Now the logo is uploaded,for preview you can select last button which is print preview.
Now goto the form,select the window where you want to print the logo.
       Then in that window place the cursor at tag coloumn and select command line.
       Now go to INSERT and select GRAPHICS.A subwindow appers click on 'stored on Document Server',
       give the name of the logo and press enter.
       Then the image information will be displayed on the form.Save the form and activate it.
Go to se38 transaction write the print program and execute.
Regards,
jaya

Photoshop CS5. Saved printer information is not compatible with this version of Photoshop

I am hoping someone has experienced this problem. I am working at a clients
office which has a large Konica Printer. When I first started using Photoshop at this office I
could print directly from PS to thier printers. Then a printer driver change or something I cannot pinpoint changed and I began getting the Error Message: The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing. I click OK and the second Error Message appears: There was an error opening your printer. Printing functions will not be available until you have selected a priner and reopened any documents. The radio button has the single response word "Cancel". After clicking that button the printing is grayed out and until I go into Color Settings and change the setting drop down box to something else, close PS and reopen the, or any file and the same thing occurs. Ihad the IT department down here and after an hour he clicked on settings and tinkered around until all of a sudden the printing was enabled. It worked until the printer driver was updated. Once again the IT guy was down here and didn't remember what he did, tinkered around and after changing the color settings to: Monitor Color, it printed. Here we go again, printer settings were randomly changed so we reinstalled the printer driver and again PS is not printing.
Is there anyone who has experienced this issue who can help me make sense of this insanity. Is there a sequence of setting changes, opening of the program and file that is allowing the color management to stop interferring with my printing other than Gremlins in this machine? I have not found anything Googling on this issue. Please help me . . . Annette

I don't think I have an answer for you about exactly what went wrong, but one thing that can help with understanding the messages (and maybe can help you and your IT people figure it out) is this:
Photoshop saves the information about the last printer the document was printed to as metadata in the document file. So if you make a print then save the PSD, the printer info is in the PSD.
If recently you opened an image that had previously been printed at another place (and which didn't have an exact match to the printer available in your current location), then you can start to imagine these error messages making a bit more sense. Things like "The saved printer information" begin to have meaning.
Hope this helps.
-Noel

Printing a Web Report Using Firefox Results in Lost Session Variables

Post Author: AVXFlyer
CA Forum: .NET
I'm having a problem with Firefox users printing a Crystal Report from a web site.
The first page of the web site collects information to be used in the report generation, for example, start date, end date, type of report etc. These are all various text boxes, drop down lists, radio buttons and check boxes. When the user clicks to show the report, everything works fine and the first page of the report will display. The code behind this page takes care of saving al the session variables into hidden fields on the page so the settings will be accessible when the user clicks to view the next page of the report.
On clicking to view the next page of the report, everything is still fine and the process works beautifully and I've had no problems.
A new problem has surfaced during the printing of these reports. Users who use IE6.0 or IE 7.0 do not have a problem, however, users who use Firefox do have a problem.
It seems that the print dialog which appears as part of the the Crystal web control manages to 'lose" the variables which were present on the calling page. It only does this with the Firefox browser. Calls on postback to retrieve the variables from the hidden fields result in 0's or empty strings ("").
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init .... .... If Me.IsPostBack = False Then ... ... strDiscontinuedOnly = Request.Form.Item("ddlInvStatus") If strDiscontinuedOnly = Nothing Then isDiscontinuedOnly = False Else Select Case strDiscontinuedOnly Case 0 'All Inventory isDiscontinuedOnly = False Case 1 'Discontinued Inventory isDiscontinuedOnly = True Case 2 'Active Inventory isDiscontinuedOnly = False End Select End If Else 'Postback is true intRequestedReport = Request.Form.Item("fldReportID") strDiscontinuedOnly = Request.Form.Item("fldInvDiscItemsOnly") isDiscontinuedOnly = Request.Form.Item("fldInvDiscItemsOnly") ... ... end if

Can't explain it, but here are a few tests;
1) Try to print a saved data report
2) Try to print a report that is not using parameters
3) Try a different printer driver as "default"
4) Enable the option "Dissociate Formatting Page Size and Printer Paper Size" on the report
5) What format do you export to?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Printing A3 page format using ABAP List from SAP is a problem...

Hi Experts,
I am trying to print a standard output (ABAP List) A3 page size from SAP.
I used SWIN, SAPWIN, I9HP4 device types, but none of them worked.
I created page format type ZYEVMIYE 290MM 420MM and the page format L120, W200. In order to make it usable with page size is A3. Unfortunately this did not work either.
The behaviour of the problem is when I tried to print with the device types that mentioned above then printer indicator comes to an error. And nothing comes out from the printer.
Just to be on the safe side I made a test from windows self test, it resulted success with A3 page size format. So from this point of the view I got a thought that somehow SAP (selected device types) is not able to send correct signal to Printer for page size A3, because on the printer information screen displays load Tray2 for A4 this is showing that SAP sends Printer a signal for page format A4.
I need help on how to make SAP (selected device type) send a correct signal to Printer in order to printout A3 page size format.
Quick reply will much be appreciated.

Hi,
At last i got a Solution to my Question.
The Problem is that in my SAP-Code they have been translated the PDF into 255 string.But i am retreiving using 132 string.So, i resolved in this way.
<b>For Each dr As DataRow In ds.Tables(0).Rows
Dim dataline As String = dr(0)
If dataline.Length < 255 Then
dataline = dataline.PadRight(255, " ")
End If
sb.Append(dataline)
Next.</b>
May be this Thread is useful to Others.
Regards,
Rajender.

Take laptop & printer to client, need to print from client computer using my printer

I nstalled my HP Laserjet 1102w to my laptop with my ips address to work wireless.
I take my laptop & printer to client's location and need to print from their computers using my HP Laserjet 1102w.
I network in to their ips address using my laptop to.
Could not install my HP Laserjet 1102w on their computer & print from their computer.
How do i print from my HP Laserjet 1102w using their computers at their location?
Thanks!

Hi debitacct ,
Thanks for clarifying that information.
You would have to restore the printer's defaults and reset up the printer on their network at the new location every time, to be able to print from the clients computer and you would have to connect to their network on your computer and add the printer back in again with the new IPv4 address.
Another way you could do this is through a USB connection or use the Wireless Direct.
You would have to enable the Wireless Direct on the printer through the printer's Embedded Web Server if you didn't select this feature during the installation. This will allow both computers to connect directly to the printer and print, but keep in mind you won't have internet access at the same time. So you can print when connected to the printer's network or connect back to the main network again to access the internet.
Here are the steps for enabling the Wireless Direct through the printer's Embedded Web Server if you decide to go this route. Print a configuration page to get the printer's IPv4 address. Printing a Configuration Page.
Type the IP address into your web browser's address bar. (Internet Explorer)
Then click on the Networking tab, select Wireless Direct Setup on the left side and check the Enable wireless direct printing.
I hope I explained that alright for you. The USB connection would most likely be the easiest way to go.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to print information

I know trace() function can print information,but I must use flex builder environment.If I don't use flex builder,the trace function can't make function.I want to know if there is a statement can replace of trace(),because sometimes I need print information for debug and I don't want to use flex builder too. Thanks

I don't want to use flex builder and other GUI tools,and I only use mxmlc command to compile as file into swf file. When I click swf file,I want to get trace information. I search the google,it say C:\Documents and Settings\Administrator\mm.cfg can log trace information,I make following content in this file:
ErrorReportingEnable=1
TraceOutputFileEnable=1
When I use flashplayer_10_sa_debug.exe to run this swf file,then I lookup C:\Documents and Settings\Administrator\Application Data\Macromedia\Flash Player\Logs\flashlog.txt,but I can't find any information in this file! Why? Where is wrong? My OS is XP.
Thanks

Scanning multiple pages from print book into computer

How to scan multiple pages from print book into computer? Someone supplied a link to this question, but I got stuck at step 1: Where is "HP Director software"? In other directions, it says to open the "HP Scan window," but that option is not available to me when I follow the directions. I have an HP 2159m computer, HP Photosmart Plus all-in-one, Windows 7, and use Firefox, if that's any help.
TIA

I have a similar problem:
I am using an HP Officejet 6310xi via its TWAIN interface. Regardless of which application invokes TWAIN (whether Irfanview, Thumbs Plus, or something else), the scanner dialog closes after transferring each scanned image. To scan the next page requires re-starting the scanner, beginning with a whole new preview and re-entering all my scan settings. This is only an issue with the HP scanner, not with my Cannon CanoScan LIDE 100, Visioneer OneTouch 8920, or any other scanner, each of whose scanner dialogs stay open for scan after scan. Can anyone help me make the HP scanner dialog stay open for multiple pages?
Note: Based on a suggestion on another site I set my scan preferences to include "Prompt for Additional Scans from Glass" as follows, but it did not help.
I am experienced at scanning, but I find it extremely frustrating that the HP scan dialog closes, forgetting its settings, after each page.
If it helps others, I gladly share my article, "Freedom from Paper--At Last" here
http://www.richpasco.org/paperless.html

Print information into top_of_page using set_table_for_first_display

Similar Messages

Maybe you are looking for