How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

Similar Messages

How to write exception information into a txt file??

i got a program which generate lots of exception information. its hard to see from the screen, is there any way to make the input into some txt file?
when i use
try
}catch(Exception ex)
// to do something here and make the output into a txt file?
}

depending upon the version of jdk being used one of the options will be to fetch the StackTraceElement array and writing each of the element using the standard file io operation
            StackTraceElement[] elements = ex.getStackTrace();
            int noOfElements = elements.length;
            for (int i=0; i<noOfElements;i++)
                  //fetch the stacktrace element and write to a file.
            }Thanks
Rahul

How to write the data into EEPROM using Labview?

How to write the data into EEPROM using Labview?

You would need some sort of EEPROM programmer. Typically might
communicate with it via serial. I don't know how you would do this in
LV. You would need to have the command protocol for the programming
device to start with.
Doug De Clue
gpibssx wrote in message news:<[email protected]>...
> How to write the data into EEPROM using Labview?

How to write the resultset into a text file

how to write the resultset into a text file

You can use the java.io.* package to write to files.
API: http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
Tutorial: http://java.sun.com/docs/books/tutorial/essential/io/index.html

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

How to run a ABAP Program in Batch JOB

How to run a ABAP Program in Batch JOB ?

Hello Manish,
Using transaction SM36 you can define the batch job along with the start conditions for that job.
1. Transaction SM36.
2. Give the Z name of the job in the 'Job Name' input field.
3. Click on 'Steps' button from the application toolbar.
4. On the 'Create Step 1' dialog box, give the name of the ABAP program in the 'ABAP Program' section' along with the variant.
5. Click on 'Check Input' button from the dialog box.
6. Click on 'Save' button from the dialog box once the check is successful.
7. One list will be shown. Click on Back button from the standard toolbar.
8. Click on 'Start Conditions' button from the application toolbar. Specify the start condition e.g. immediate. Click on save.
9. The job staus is now scheduled.
10.Click on Save button from the standard toolbar of SM36. The job status will be released.
Using SM37 you can monitor the status of the job.
This will sort out your problem.
PS If the answer solves your query, plz reward points.
Regards

How to check HP LaserJet 500 color M551 job log

Hi Everyone
I have a new HP LaserJet 500 color M551 set for users, after user print a document to the printer, I want to know how many sheet it used. In the job log page I can only find who print it, output size, black or color... But I can't check how many sheet the print job used. Is there nay method to check it?

Thanks for the reply
I had try the method but it still can't get the info. what I want get is how many sheet(s) the print job used but it didn't show in the job log page. the print job only show following info:

How to write the text into text objects

Hi,
I have one requirements . from the web we get the delivery line item based pallet numbers info with Quntity .
How to write the line item level pallet information in the the Delivery line items text element "pallet info" .
Any function module to write the text data into text elements in SAP like READ_TEXT.
please give your valuable suggisions .
Thanks &Regards
Sai.

Try:
CREATE_TEXT
SAVE_TEXT

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

How to associate hardware information into an Oracle Table?

Hi,
I am new on Windows 2000 .
I am using the following script in order to get the windows 2000
hardware information.
I am using 8.1.7 version of ORACLE.
I am using a table "Server Hardware"(Server list,Network Adapter,RAM).
I would like to ask that how should or where should I use this script
in order to associate its information into my table "Server Hardware".
Could someone give me hints that how to use this script?
Thanks
Lee
Following script returns the name and version number of the operating
system installed on a computer
Script Code
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer &
"\root\cimv2")
Set colOperatingSystems = objWMIService.ExecQuery _
("Select * from Win32_OperatingSystem")
For Each objOperatingSystem in colOperatingSystems
Wscript.Echo objOperatingSystem.Caption & " " &
objOperatingSystem.Version
Next

Actually, I am not using Recovery Catalog, so the views like RC_database, Rc_tablespaces etc , which are specific to recovery catalog are not available.
r.- this make sense at 100% because those views belong to the recovery catalog.
So, I wanted that these information, which we can get via using the commands like above, transfer into an Oracle table
r.- If you want to access the views of the Recovery Catalog to store part of that information in tables you have to have the database registered in a Recovery Catalog.
Should we keep the Recovery Catalog in Control file? Instead of using separate Schema.
r.- I recommend you to create a catalog for your database because the space the controlfile to store information regarding RMAN is reused and you can lose important information about your backups.
Can we run Catrman.sql script as a sys in order to keep the recovery catalog in sys schema?
r.- As you know, this is not recommended at all.
Conclusion : Create a Recovery Catalog and you will be able to perform all that you want regardind what you mentioned above.
I have a thread for this:
RMAN ( CATALOG CREATION ) STEP BY STEP by Joel Pérez
Joel Pérez
http://otn.oracle.com/experts

Hello! I use photoshop CS3. recently, after logging information into FILE INFO, I am unable to close out that window. I am able to save & close the image I am working on, but the window remains. I then must close out of Photoshop completely and reopen to

Hello! I use Photoshop CS3 and Yosemite. Recently, after logging info information into the FILE INFO panel, I am unable to close out the window. I am able to save & close out the image, but then I have to completely close Photoshop and re-open the program to work on a new image. Frustrating! Any help to remedy this problem? Many thanks!

Try resetting the Photoshop preference file: Press and hold Cmd+Opt+Shift and start Photoshop. Select "yes" when asked if you would like to continue with reset.
Benjamin

How to write a file into UNIX!

Hi Group!
I am trying to write an error file into UNIX directory using 'OPEN DATASET ERRFILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT'. But unfortunately i am getting a dump as it is giving the subrc 8 and dumping with CX_SY_FILE_OPEN_MODE.
The path looks like /sap/DE1/batch/data/SCM_YM/partfiles/HGMEH011.20071001150344
Is there any special command or way to write the file into UNIX?
Quick response would be of great help.
Suresh

The detailed error is
The file '&FILENAME&' was not opened, or was opened in the wrong mode.
Can you please try to create a new file that does not exist.
then we can check whether you have authorization or not.
OPEN DATASET to a file already opened - in the same internal mode - triggers the exception.
THtas why you just create a file with some rough name ( may be ur name) intially and then check.
bye sasi

How to write custom messages to Data Manager package log from within SSIS?

Just wonder in BPC 7.0/7.5 MS how do you write custom messages to Data Manager package log from within SSIS? I mean I want to log output of specific custom tasks (non-BPC) in SSIS control flow to the resultant BPC package log created when running SSIS package in Data Manager. Can this be done in a Script Task or some other way? Not much documentation out there on this.
Thanks,
Brian

Hi Brian
In order to achieve what you want, it can get tricky in your package, ultimately It would depend on the task, for example if you had an execute SQL task, you could use a RAISEERROR command in your SQL statement and BPC would return the error message that you specified.
If you had other tasks, then it would be a bit more tricky, you would have to have custom messages based on event handlers.
Please see below links for examples :
[Custom messages for logging|http://msdn.microsoft.com/en-us/library/ms345174.aspx]
[Custom Logging Using Event Handlers |http://consultingblogs.emc.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx]
Hope this helps
Kind Regards
Daniel

How to write select statement into SCRIPT editor

hello,
i build a sap script for purchase order printing for exporting.
now after all po order print fine then our client want some more should be print into layout regarding po header.
At the soul my q is can i write select query into script editor itself.
thanks and regards
amit.

You cannot write your select statement inside your SAPscript, to overcome this SAP has provided us an option of calling sub-routines.. go through the below example
Go through this example
Ex. SAPSCRIPT
/: PERFORM <Subroutine name> IN PROGRAM <subroutine prog name>
/:USING &<field name>&
/:CHANGING &<field name1& "It will be returned back from sub-routine
/:ENDPERFORM
Then create subroutine pool program(of your own name) and you have to write the code.
FORM ><subroutine name> tables int_cond structure itcsy
outt_cond structure itcsy.
data : value(20), value1(20). "do your own declarations
Read int_cond table index 1.
value = int_cond-value.
value1 = value1 + value.
*****Write your select statement
Read outt_cond table index 1.
outt_cond-value = value1.
Modify outt_cond index 1.
ENDFORM.
Just rough idea given above.
Regards,
SaiRam

How to send an updated list using batch job

Hi All,
The program displays data on the screen, if the data looks ok, then there is an option to update.
When I run update, the program submits a batch job and the basic list gets updated, but my batch job is still sending the data on the screen. how can i send the updated list using batch job.
Ex: output of the program
                1         2
       there is an update button on the screen, when i press update button, my program submits in batch job, the above list becomes
                1        2
                3        4
but when i check the spool, it shows the o/p as         1           2 ..it is not sending the updated list.
Please suggest me how to send the updated data
Thanks,
Kumar

Hi Krishna,
I have added a button on the alv list. when i press update button, my program updates the list, then submits the batch job. I am attaching the sample test program i am trying with, please suggest me how can i get the updated list.
*& Report ZTESTSSSSS
REPORT ZTESTSSSSS.
DATA: gt_fieldcat TYPE slis_fieldcat_alv,
      lt_fieldcat type slis_t_fieldcat_alv,
      gt_sort     TYPE slis_t_sortinfo_alv,
      g_repid     LIKE sy-repid,
      gt_layout   TYPE slis_layout_alv.
start-of-selection.
lt_return-type = 'S'.
lt_return-message = 'test message'.
append lt_return.
CLEAR gt_fieldcat.
gt_fieldcat-fieldname = 'TYPE'.
gt_fieldcat-outputlen = '3'.
gt_fieldcat-tabname   = 'LT_RETURN'.
gt_fieldcat-seltext_l = 'Type'.
gt_fieldcat-seltext_m = 'Type'.
gt_fieldcat-seltext_s = 'Type'.
APPEND gt_fieldcat TO lt_fieldcat.
CLEAR gt_fieldcat.
gt_fieldcat-fieldname = 'MESSAGE'.
gt_fieldcat-outputlen = '15'.
gt_fieldcat-tabname   = 'LT_RETURN'.
gt_fieldcat-seltext_l = 'Message'.
gt_fieldcat-seltext_m = 'Message'.
gt_fieldcat-seltext_s = 'Message'.
APPEND gt_fieldcat TO lt_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM       = sy-repid
      I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IT_FIELDCAT              = lt_fieldcat
    TABLES
      T_OUTTAB                 = lt_return
    EXCEPTIONS
      PROGRAM_ERROR            = 1
      OTHERS                   = 2.
*&      Form set_pf_status
      text
     -->RT_EXTAB   text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'STANDARD'.
ENDFORM. "Set_pf_status
*&      Form user_command
      text
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM user_command USING r_ucomm     LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
DATA: li_count TYPE I.
IF r_ucomm EQ 'UPD'.
Adding another message
    lt_return-type = 'S'.
    lt_return-message = 'Another test message'.
    APPEND lt_return.
    rs_selfield-refresh = 'X'.
    rs_selfield-col_stable = 'X'.
    rs_selfield-row_stable = 'X'.
    l_upd = 'X'.
   LOOP AT lt_return.
     WRITE: / lt_return-type, lt_return-message.
   ENDLOOP.
    IF sy-batch IS INITIAL.
      l_upd = 'X'.
Open the Job
      CALL FUNCTION 'JOB_OPEN'
        EXPORTING
          jobname          = w_name
        IMPORTING
          jobcount         = w_number
        EXCEPTIONS
          cant_create_job = 1
          invalid_job_data = 2
          jobname_missing = 3
          OTHERS           = 4.
      IF sy-subrc = 0.
        SUBMIT ('ZTESTSSSSS') VIA JOB w_name NUMBER w_number
                AND RETURN
                WITH p_recnnr = p_recnnr.
        CALL FUNCTION 'JOB_CLOSE'
          EXPORTING
            jobcount             = w_number
            jobname              = w_name
            strtimmed            = 'X'
          EXCEPTIONS
            cant_start_immediate = 1
            invalid_startdate    = 2
            jobname_missing      = 3
            job_close_failed     = 4
            job_nosteps          = 5
            job_notex            = 6
            lock_failed          = 7
            OTHERS               = 8.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM. "User_command
Thanks,
Kumar

How to write log information into SM37 batch job log

Similar Messages

Maybe you are looking for