Print invoice from print server (printer is installed at the server)

Question

Hello all
i have a LAN with 2 domain controllers (1 win2008 std and 1 win2008 R2 std).
My 2008 std is also a print server. ALl my printers are installed locally and through GPO i distribute them at all computers.
I want to know how can i set up my matrix EPSON 890 printer with the same logic.
I want to install it locally to the server, install a small printer server with the IP address 192.168.1.205 at the network and through GPO to distribute it to the computers which i want to print invoices.
i managed to install the server locally and i do the following settings at SAP but wihtou success:
1) t-code SPAD -> ACCESS METHOD -> S: PRINT USING SAP PROTOCOL
host printer :
192.168.1.205\invoice
Destination host: 192.168.1.205
but every time i give something to print i get an error.
Anybody know how i can resolve this?
now i have the EPSON 890 installed locally to a computer with USB and from there it is shared and all the users pritn there but that means i need to have the computer open all time
thx

Answer 1

Hello,
I'm sorry you have come across this, we have seen this before, it seems to be an issue with an installation of OS and/or other software that conflicts with the Xilinx compile server installation.  This problem does not seem to be related to NI software, but that Xilinx compile server is conflicting with the software on some computers 
What you want check is that compiler path and the root build directory are set to \NIFPGA86\Xilinx and \NIFPGA86\srvrTmp respectively.
Next we can try to compile your VI remotely, I've attached a link below on how to do this. If you can compile remotely, then we know that issue is not due to your code and is now down to the Xilinx compiler.
Using the LabVIEW FPGA Compile Server (FPGA Module)
http://zone.ni.com/reference/en-XX/help/371599C-01/lvfpgaconcepts/compiling_fpga_vis/
At this point, we can just remove and reinstall LabVIEW, LabVIEW FPGA module, the Xilinx compile server and reinstall NI RIO or try in on another computer.
Hope this helps,
Anna K.
National Instruments