Print Invoice Header Text In Main Window of Smartforms
Helo Gurus !!!
I want to print Invoice header text in main window of smartform.
There are total 5 columns.
Item Quantity Description UnitPrice Amount
Now what I want is to print header text below Description column, there is a loop on the table in main window.
This header text will be printed only once. This is a standard header text
How to get this?
Points are assured !!!
Hi Anay Kulkarni,
I understood that u need to print this header text
Item Quantity Description UnitPrice Amount
So please use TABLE instead of LOOP in the table we can prin header, main area, footer.
place the header text in header area in table... i am sure this can resolve it.....
feel free to contact me if issue is not resolved/.....
dont forget to reward points....
all the best...
Regards,
Sreeniasa Sarma K.
Similar Messages
-
Printing Form Header Text in Smartforms
Hi,
I have created smartform for SD module.I am printing Form header text in a window by using loop.I am getting the text with the help of READ_TEXT function module.It comes as we type in Form header.But the problem is if they type more than 15 lines it is not printing.I want to print the rest of the lines in next page.How to do this?Hi,
In smartforms, only the main window is a dynamically varying one.
So give your include text concept in the main window..
so that if your text increases more than a page, it will be printed in the next line..
You can maintain your text in so10 transaction.. with text id and text name..
using include text u can simply give the Id and text name in forms, you will get the enetered text.
regards,
vijay.R -
Hi,
I am trying to print 'Item Text' from invoice just below each item description(same cell of 'item descripotion' is used to print 'Item Text' in MAIN WINDOW ) in smartform. I had used an include text.
For Ex: long text maintained is
TEXT1 TEXT1TEXT1
TEXT1TEXT1TEXT2
TEXT1TEXT1TEXT3
TEXT1TEXT1TEXT4
TEXT1TEXT1TEXT5
If suppose maximum size of cell can occupy only 3 lines of above long text , then it should only print remaining last two lines on the next page .
Main Window
Page 1
Item Desciption
TEXT1 TEXT1TEXT1
TEXT1TEXT1TEXT2
TEXT1TEXT1TEXT3
Page 2
TEXT1 TEXT1TEXT4
TEXT1TEXT1TEXT5
Also in the layout design height of main window on NEXT PAGE is slightly greater than size on FIRST PAGE.
But , in my case it is generating three pages. Page 2 and 3 are printed as shown below.
Page 2
Item Desciption
TEXT1 TEXT1TEXT1
TEXT1TEXT1TEXT2
TEXT1TEXT1TEXT3
TEXT1 TEXT1TEXT4
Page 3
Item Desciption
TEXT1 TEXT1TEXT1
TEXT1TEXT1TEXT2
TEXT1TEXT1TEXT3
TEXT1 TEXT1TEXT5
Please let me know , how to correct this.
Note:- Form is Migrated from SAP Script to Smartform.Hi Mayank,
Use Page protection For that TEXT Element (Include) in output options.
Regards,
Soorya -
How to output particular text in main window only in first page
Hi experts how to ouput particular text in main window only in first page after that actual transaction data will be continued.....any ideas....Answers will be rewarded.....
Hi,
Try this.
/: IF &PAGE& = '1'
/: ENDIF
Thanks,
Naren -
Order header text needs to be copied to Invoice Header text
Dear All,
i am putting some header text in the sales order,i want the same to be copied to the invoice header text,pls guide how to do the same as soon as possible.
Regards,
AKDDear AKD,
If you want to copy the sales order header text to the invoice header first you need to copy the sales order header text to the delivery header from delivery you can copy to invoice.
When you want to copy the Text from Sales order to delivery the Access sequence will place a role
Through VOTXN you need to do the Text determination settings to the Sales order header,delivery header and invoice header.
If you want to copy the sales order text to the delivery document The Text Object should be VBBK in the delivery Header Text determination access sequence for that Text ID
Again you can copy the text from delivery to Billing document through checking the Delivery Text field in the billing document detail screen (Top most bottom of the screen).
Go to VOFA transaction select your billing document type then go in to the details here you can find the Delivery Text field you just check that check box.
Now system will copy the sales order header text to the delivery header then it will copy to the invoice header.
I hope this will help you,
Regards,
Murali. -
Capture the Invoice Split Reason and update it in the invoice header text
Hi All,
We have a requirement where we need to capture the invoice split reason and update the reason in the one of the invoice header text.
Problem is the routine where the split criteria is being determined is called a number of times, so how will we determine at what time of time do we need to capture the split reason. I mean at what iteration of the routine will we know that the split value is the right value.
Is there any way to determine the number of iterations of a routine written for split?
Require your valuable inputs for this issue....
TIA
Regards,
SharadenduHi,
Is your invoice split reason maintained in the header or item level?
Try coding your logic in user exit MV45AFZZ and update header text using text id and save it in header text using
FM [SAVE_TEXT|http://help.sap.com/saphelp_40b/helpdata/en/d6/0db8ef494511d182b70000e829fbfe/content.htm].
Before this logic use FM [READ_TEXT|http://help.sap.com/saphelp_nw70/helpdata/en/d6/0db8c8494511d182b70000e829fbfe/content.htm] to determine if the header text is already updated. If yes,exit else save your HEADER_TEXT using SAVE_TEXT.
This code can be written under FORM_USEREXIT_SAVE_DOCUMENT_PREPARE.
Regards,
Amit
Edited by: Amit Iyer on Sep 1, 2009 8:46 PM -
HI:
I would like to do query to print PO header text.
I have try STXH but no PO number to link to and no text line.
Pls advise.
Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com
See as well our rules of engagement: http://scn.sap.com/docs/DOC-19331
A good way to search the forum is with google. See this blog with details for a good search
http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
Thread locked
Message was edited by: Jürgen LHi,
It wil be easy with an abap report using Function Module READ_TEXT.
Regards,
AKPT -
Main window of SAPScript versus Main window of smartform
Hi,
In case of Smartform we have one main window per page but in case of SAP Script we can have 0 to 99 Main window on one page.
In case of smartform if the main window on one page gets filled then the remaining long text will jump on main window of second page.
Following are my doubts:
If I define three MAIN windows for three different kind of long texts on page one in SAP Script as follows:
MAIN Window 1 - Long text1
Main Window 2 - Long text2
Main Window 3 - Long text3
1) If the long text 1 on MAIN window 1 of first page gets full does it automatically jump to Main Window 2 of first page ?
2) If I don't want the long text on Main Window 1 to jump on Main window 2 on first page but on Main winodw 1 of next page , is it possible ? How do I do it ?
Answers will be rewarded..
Tushar.In SAPScripts if the long text is filled in the Main Window it will spill over into the same Main Window if it is defined in the next page. Text from one Main Window will nt spill over onto the text to different Main window.
So as far as you questions are concerned:
1. Not it does not automatically jump over into Main Window 2 from Main Window 1 on same page or next page.
2. You just need to define the Same Main Window on the next page so that text gets jumped over to the next page. If it is possible just define the next page as the same page, so that you do not have to create a separate page and attach all the windows.
Hope this helps you...
Shashi Reddy -
How to Print Sales header text at the end of last page of Main Window
Dear All,
I have a requirement to print Sales order header text at the end of Main of last page. I don't have footer window.When i use Bottom-End bottom.Only one line is printing.The header has 5 lines.
Request you to provide <b>code</b>to handle this situation. Your response is highly appreciated
Best Regards
PraveenHi,
If u r using standard layout set RVORDER01.
U can print that sales order header text in the following text element.
/E SUPPLEMENT_TEXT.
U can include ur text objects here.
Then it gets printed.
Regards,
Veda Kumar -
SAP Script: Include text in MAIN window prints outside MAIN window margins
Hi,
We're facing a peculiar issue. We call a text element in the MAIN window of an SAP Script form using FM WRITE_FORM.
The element has 2 includes.
The problem is that when the content of any of the 2 includes is large enough, the include text prints overflows outside the MAIN window margins on the first page and into the area of the footer window of the same page. It does not automatically flow to the next page MAIN window.
We have checked that the MAIN window and FOOTER window margins do not overlap. Infact they are quite far from each other.
We have tried stuff like using a forced PROTECT, change the para format etc, but nothing solves the problem.
Does anyone have any idea?You do not need to use the subroutine READ_ORDER_TEXT to get another text name because you already have it: TMP_TXNAM2 .
Pass this value back to your SAPscript, and it is okay.
Or you can even check the text object is empty or not, if no text is found, print 2 empty lines:
still use your subroutine to read the text, if no line is found, set TMP_TXNAM2 to empty, otherwise, no change,
In SAPscript, check the value is empty or not, then print 2 empty line or the text object... -
Printing of header text msgof billing doc in Invoice.
Hello Gurus,
Goodevening,
I have requirement from client.
This is the requirement ,
He will give the text in billing docment header in billing document but when takes the invoice the header text to be printed in invoice.
Is it possible ? looking for your inputs
Thanks & Regards
Venkat.
Edited by: K.Venkata Chalapathi on Jul 15, 2010 5:08 PMHiii
Billing Header text can be print in your billing document, If it is developed smartform then you can take the help the ABAPer to print the text. For the same you have to create the text ID whichever you want to print in smart form then ABAPer will mapped the ID in his smartfrom on required place.
Regards
Shambhu Sarkar -
Include text to be printed in the middle of main window
hi Gurus,
In SAP script - i have used include text ( which is a picture ) which i need to bring it nearly to the center of the main window. ie.,
/: INCLUDE IMAGE1 OBJECT TEXT ID ST PARAGRAPH P1
paragraph p1, i have made the alignment as centered.
and i have changed it to
/: include zhex-macro-image1 object text id st ----> also didnt work
posnr matnr then this image should come.
but still the image is coming in the begining of the new line. i want it to be continued with the previous line.
please guide me.
thanks.
Sakthi.>
sakthi sri wrote:
> hi Prakash,
>
> i already did what u said. but the problem is that image should come only for that material. if suppose that material is going to come as the last material then how that image will come in the last. it always comes in the same window only what we difined. thats why i am trying to push it in the main window itself.
>
> did u got my problem?
As i understand the image is to be shown conditionally.
Try:
{code]
/: IF posnr = 'the position you want' AND matnr = 'matrn you want'
/: INCLUDE IMAGE1 OBJECT TEXT ID ST PARAGRAPH P1
/: ENDIF
{code} -
Problem in printing multiple main window in smartforms
Hi Experts,
I have requirement form client to print PO which consists of 4 page.
First page is cosists of header and some text.
In second page different header and line item.
Thirs page different header and line item.
4th page different header and line item.
I have printed tex in main window of first page and called command to trigger
second page main window, but i am getting dump.
How to print the line item in the multiple page of smartforms.
Regards,
UdupiHello ,
To print the text below are following steps which you can follow for your requirement :
1. Create the Four pages having the Main Window, but take care that Logic should be in First Page Main window only , other pages main window will be blank.
2. Create the Secondary Window in second, third & fourth page which will be same size as the main window having the text which need to be print in respective pages.
3. Logic Part - in the main window of first page fill all the data which you need to print in 1st to 4th page in different internal table. Now for example you need to print text in first page then in Main window create table having the data of 1st page.
To print data in Second page create one more table having data of secondpage and put the Command there (follow the same for next pages,)
I hope this will help you
Thanks
Romit Raina -
Displaying bottom text of main window in box?
Hi all ,
I am working with a sap script, where i need to display standard text in box at end of the main window.
The problem is i am unable to set the dynamic position of the box at bottom of the main window .
please help me to fix this problem?
Thanks,
Vamshi.
Edited by: VAMSHI KRISHNA on Oct 29, 2008 12:04 AMHi Gustavo,
Thanks for your reply.
But here my requirement is the text should be displayed immediately after the data in main window is printed . If i used the bottom window , then it will display exactly in that position despite of the main window data.
So Is there any way to display text in box dynamically, after main window data is completed?
Thanks,
Vamshi. -
Problem with printing the pages due to main window
hi experts ,
in my requirement i have 4 pages in smart form.It takes quotation number as input and dispaly all the contracts.
1 potrait
2 potrait
3 landscape
4 landscape
i have used a main window in the second page contains 2 windows for printing address then
one main window for printing contracts, and systems info in two tables .
i have used a main window in the 4 th page too for printing some item details equipment list.
both main windows having same width.
i am getting 1 st & 2nd pages only as o/p if i mention 2nd page in the next page field of first page .
i am getting 1 st 3 rd , 4th , 5th ........pages if i mention 3 rd page in the next page fileld of first page .
i didn't use any extra page to populate if 2nd page is filled completely .
please guide me .
Thanks & regards.
SrikanthHi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.
Maybe you are looking for
-
Schedule Manager (add Tcode to Flow Definition step)
Hello together, I have got a problem with the schedule manager ("scma"). I would like to add the Tcode cja1 (Project-Related Incoming Orders) alternatively the program "SAPLKAZB" to a flow definition step with a variant.But the program "SAPLKAZB" is
-
MOH not working on specific phone number after uploading new MOH file
We have Cisco Unified CM Administration version 8.0.3.20000-2. Our college has a global MOH (music on hold) file (MOH_040208) that plays for everyone. I was trying to figure out how to upload a different music file (MOH_101311) to see if I could get
-
Ios8 installed on Ipadmini - not getting cellular network
I have installed ios 8 on my ipad mini (WIFI+3G). No issues on installation but as I restart, i am getting WIFI but no cellular signal at all (Neither Edge or 3G). Interestingly, when I do Manual selection of Carrier, I get my carrier - but even on s
-
What are the best practices in design patterns?
What design patterns are likely popular?
-
I have a Mac OS X and I'm trying to download Adobe Reader 11 and it won't open.
I have a Mac OS X and I'm trying to download Adobe Reader 11 and it won't open. I get it installed, however, when I click on the icon nothing opens. Please help!