Print out table desc from sql/plus

Hello,
I'm trying to print out the desc table from the database .
What is the syntax for it in the sql/plus ?
Thanks very much.
TPham
null

tpham (guest) wrote:
: Hello,
: I'm trying to print out the desc table from the database .
: What is the syntax for it in the sql/plus ?
: Thanks very much.
: TPham
Jerome wrote:
Hi! Tipham!
Here is the command:
In Sql/plus
1. spool on --these command set spool on
2. spool c:\desc_table.sql -- these command open desc_table.sql
file for spooling. It is
user-defined it will be created if
it is not existin
3. desc table_name -- the result will be recorded to
desc_table file. Open it in any text
editor and print it.
from [email protected]
null

Similar Messages

Calling stored proc (with 2 IN and 3 OUT) - from SQL Plus

This is the signature of my stored proc:
CREATE OR REPLACE PROCEDURE myschema.myproc
   p_usr_name     IN VARCHAR2,
   p_send_tmstmp IN DATE,
   p_ret_value    OUT NUMBER,
   p_err_code     OUT VARCHAR2
)If I need to call it from sql plus, how do I need to pass the arg?
This is what I am doing
execute myschema.myproc('abc123','02-MAY-2008');
What is wrong here? If someone could help. Thx!

Try something like this
var usr_name    varchar2(30)
var send_tmstmp varchar2(11)
var ret_value   number
var err_code    varchar2(10)
begin
:usr_name    := 'abc123';
:usr_name := '02-MAY-2008';
myschema.myproc ( p_usr_name           => :usr_name,
                  p_send_tmstmp        => TO_DATE( :usr_name, 'DD-MON-YYYY' ),
                  p_ret_value          => :ret_value,
                  p_err_code           => :err_code);
end;
print ret_value;
print err_code;

How to pass table type variable into function from SQL*PLUS ?

How to pass a table type variable from sql*plus prompt into a function ?
Thanx in advance.

Krishna,
Do you mean like this?SQL> DECLARE
2      TYPE t_tbl IS TABLE OF VARCHAR2(20);
3      l_sample_tbl           t_tbl;
4
5      FUNCTION print_contents ( p_tbl IN t_tbl )
6      RETURN VARCHAR2
7      IS
8          l_string            VARCHAR2(1000);
9      BEGIN
10          FOR i IN 1..p_tbl.COUNT LOOP
11              IF (i = 1) THEN
12                  l_string := p_tbl(i);
13              ELSE
14                  l_string := l_string || ', ' || p_tbl(i);
15              END IF;
16          END LOOP;
17          RETURN (l_string);
18      END print_contents;
19
20 BEGIN
21      l_sample_tbl := t_tbl();
22      l_sample_tbl.EXTEND;
23      l_sample_tbl(1) := 'one';
24      l_sample_tbl.EXTEND;
25      l_sample_tbl(2) := 'two';
26      l_sample_tbl.EXTEND;
27      l_sample_tbl(3) := 'three';
28      l_sample_tbl.EXTEND;
29      l_sample_tbl(4) := 'four';
30      l_sample_tbl.EXTEND;
31      l_sample_tbl(5) := 'five';
32      DBMS_OUTPUT.PUT_LINE(print_contents(l_sample_tbl));
33 END;
34 /
one, two, three, four, five
PL/SQL procedure successfully completed.
SQL> HTH,
T.

Print a report from sql*plus.

Regards all
Let me know whether it is possible to print a hard report rom sql*plus and how.
waiting

Let me know whether it is possible to print a hard report rom sql*plus Yes. SPOOL is a command to get SQL*Plus screen results to disk real-time.
and how.A "report" is such a generic term, that you will have to get started with at least some reading :)
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a90842/toc.htm
(search for: "How Can I Learn SQL*Plus")
You may also address specific questions about the SQL*Plus product (that are not really Database SQL and/or PL/SQL related) via the [Technologies>Tools>iSQL*Plus] forum rather than here.
waiting That's up to you! Dig in!
Michael O'Neill
Publisher of the PigiWiki
clever-idea.com

How to print out a date from the past

I am trying to print out a date from the past but I cant seem to get It,
Lets use for example Independece Day,
How would you write the code in order to print out that exact date?

Look at the
[url=http://java.sun.com/javase/6/docs/api/index.html?
java/util/Date.html]Date APIActually the Calendar class would be better to use, since you can set all the different fields from year to second, plus things like day of week, day of month, week of year, etc.
too slow
Message was edited by:
hunter9000

How to exit from SQL*Plus based on the return value of a SQL select stment?

Hi
I have a SQL script executed from SQL*Plus. I would like to know if SQL*Plus
supports any kind of branching or exiting from script execution based on a
returned value of a SQL select statement. I am on 9i.
Regards,
Tamas Szecsy

in sqlplus, you have whenever
ex:
whenever sqlerror exit failure
insert into ...
-- if this fails, then you will be out
insert into ...
-- if this fails, then you will be out
whenever sqlerror continue
insert into ...
-- if this fails, this continues
insert into ...and you have PL/SQL
declare x number;
begin
select count(*) into x from emp;
if (x=14) then null; end if;
end;
/note that you can mix those in some case
-- exit if there is no row in emp
whenever sqlerror exit 1
var dummy number
exec select count(*) into :dummy from emp having count(*)!=0

How execute this stored procedure from SQL PLUS???

Hello folks....
Help me please...
I have this procedure....
CREATE OR REPLACE PROCEDURE TEST(COD OUT VARCHAR2, NUM OUT
VARCHAR2, ID OUT VARCHAR2)
AS
BEGIN
END;
SO, I4D LIKE TO EXECUTE IT FROM SQL PLUS::
BUT, I DONT KNOW HOW TO DO..PLEASE SEND ME A SAMPLE..
THANK U

Thank u man!!!
look, my error before was :
SQL> set serveroutput on
SQL> declare
SQL> cod varchar2(100);
SQL> num varchar2(100);
SQL> id varchar2(100);
SQL> begin
SQL> TEST( cod, num, id );
SQL> EXEC DBMS_OUTPUT.put_line( cod || ' ' || num || ' ' ||
id );
SQL> end;
SQL> /
i put the EXEC....
thank u!!!

Calling a function from sql*plus

I can call my procedure from sql *plus
by doing
sql>call Proc_name(x,y);
How do you call a function?
null

John,
I think moifying the statement
CREATE OR REPLACE PROCEDURE "OGUSER"."OGX1" (user_county in integer, user_permit in integer )
TO
CREATE OR REPLACE FUNCTION "OGUSER"."OGX1" (user_county in integer, user_permit in integer ) return NUMBER is
AND before end you will have to add a return statement
(Probably
return 0;
exception
when others then
return 1;
end;
This will change your procedure to a function but I am not sure you'll be able to see your dbms_output's, if you call the function using select ...
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by john saucer ([email protected]):
I want to turn my procedure into a function.
So I can call it with a select statement.
I'm kind of having problems with the return statement at the top and bottom.
I don't quite understand how to declare the type in the return. My procedure calculates 2 pl/sql tables....
My procedure looks like.
CREATE OR REPLACE PROCEDURE "OGUSER"."OGX1" (user_county in integer, user_permit in integer )
as
i integer :=0;
j integer :=0;
type dept_table_type is table of ogxtest%rowtype
index by binary_integer;
type dept2_table_type is table of ogxtest%rowtype
index by binary_integer;
my_dept_table dept_table_type;
my_dept2_table dept2_table_type;
v_cotemp number := user_county;
v_permittemp number := user_permit;
v_origcotemp number := user_county;
v_origpermittemp number := user_permit;
v_count number(2) :=1;
v_count2 number(2) := 1;
v_oldcount number(2) :=1;
v_oldcount2 number(2) := 1;
begin
select count(*) into v_count from ogxtest where oco=v_cotemp and opermit=v_permittemp;
select count(*) into v_oldcount from ogxtest where nco=v_cotemp and npermit=v_permittemp;
while v_count >= 1 LOOP
i := i+1;
v_count2 := v_count2 +1;
select *
into my_dept_table(i)
from ogxtest where oco=v_cotemp and opermit=v_permittemp;
v_cotemp := my_dept_table(i).nco;
v_permittemp := my_dept_table(i).npermit;
select count(*) into v_count from ogxtest where oco=v_cotemp and opermit=v_permittemp;
end loop;
while v_oldcount >= 1 LOOP
j := j+1;
v_oldcount2 := v_oldcount2 +1;
select *
into my_dept2_table(j)
from ogxtest where nco=v_origcotemp and npermit=v_origpermittemp;
v_origcotemp := my_dept2_table(j).oco;
v_origpermittemp := my_dept2_table(j).opermit;
select count(*) into v_oldcount from ogxtest where nco=v_origcotemp and npermit=v_origpermittemp;
end loop;
for i in 1..v_count2-1
loop
dbms_output.put_line(' reassigned to - orig county ' | |my_dept_table(i).oco | | ' orig permit ' | |my_dept_table(i).opermit| | ' new county ' | |
my_dept_table(i).nco | | ' new permit ' | |my_dept_table(i).npermit );
end loop;
for j in 1..v_oldcount2-1
loop
dbms_output.put_line(' reassigned from - orig county ' | |my_dept2_table(j).oco | | ' orig permit ' | |my_dept2_table(j).opermit| | ' new county ' | |
my_dept2_table(j).nco | | ' new permit ' | |my_dept2_table(j).npermit );
end loop;
end;
<HR></BLOCKQUOTE>
null

How to insert data which contains '&' from SQL*Plus without asking prompt

Hi,
I want to insert data in table from SQL*Plus but data value contains '&' as given in below example(insert script).
There are 10000 rows. When I load from SQL*Plus it is asking for 'value for :P'.
I dont want to replace '&' with 'and' also there should not be prompt for asking value for :P.
Example
Insert into CS_Tracker (TrackId,FeedBack) values ('ARARGE034678','S&P');
Insert into CS_Tracker (TrackId,FeedBack) values ('ARARGE034676','S&F');
Insert into CS_Tracker (TrackId,FeedBack) values ('ARARGE034677','A&P');
Can anyone help me in above issue.
Thanking in Advance
Sanjeev

use
set define offbeforehand

How can I print out my contacts from my ipad

HHow can I print out my contacts from my iPad or iPhone?

Hi Ken, there is an app, Contact Sheet (http://itunes.com/apps/appiota/contactsheet) that will not only print your contacts, it can also print the pictures! This app can be used to back up, share, or extract information from your contacts. You can select which contacts to use by creating a group and you can choose which fields to include. So, for example, if you were creating a phone list to distribute to your bowling group, you could just include names and phone numbers and not include address or other information that people may not want shared. It can even be used to send group emails and group text messages. Please check it out!

HOW TO FIND OUT TABLE DESCRIPTION FROM JDBC?

HOW WILL FIND OUT TABLE DESCRIPTION FROM JDBC?

Have a look at ResultSetMetaData
getColumnCount()
getColumnName(int)
getColumnTypeName(int)
getColumnDisplaySize(int)
***Annie***

Why can't I get my printer to print out a playlist from i-tunes? It used to work but now my printer doesn't seem to receive the "print" command.

Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!

I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott

How to exit from SQL PlUS

HI,I came to know that direct exit from SQL Plus without Oracle shutdown causes future issues of ORA-0600 kind of errors. Is it true? If yes could u pls suggest me how to shutdown from user "SYSTEM/manager". Bcoz with this am warned that I dont have previleges.

Hello,
HI,I came to know that direct exit from SQL Plus without Oracle shutdown causes future issues of ORA-0600 kind of errors. Is it true?The ORA-00600 is an internal error it can be caused for instance by a Bug, a corruption, ... , and if someday you experience this kind of error, you should open a Service Request to My Oracle Support.
However, I've never heard that exiting sqlplus could cause this kind of error. Where did you get such information ?
how to shutdown from user "SYSTEM/manager". To shutdown the database you should be connected with the User SYS (as SYSDBA). You may use the following statement:
sqlplus /nolog
connect / as sysdba
shutdown immediate;
exitHope this help.
Best regards,
Jean-Valentin

How to connect from sql*plus to Sql Server

Dear Profs.
How I can connect from sql*plus v8 on my local pc(Win XP) to Sql Server Express 2005 light weight installed in same local pc ?
Thanks,
Ahmed.

You'll need to setup heterogeneous services. This is done by creating an init file for the SQL Server db with %ORACLE_HOME%\hs\admin that refers to a DSN for the Sql Server Database. The listener would also need an entry for the SQL Server DB DSN. After that you would create a dblink to SQL Server in your Oracle instance and then could query across the dblink.

Restricting the user to operate DML's from SQL PLUS Environment

how to Restrict the user to operate DML statements from SQL PLUS Environment.

Once you restrict SCOTT user to not be able to do an INSERT command, the SQL*Plus returns an error for user SCOTT when he tries to execute an INSERT statement.
Note however, that this is enforced by SQL*Plus, not the database!
Look into the use of product_user_profile from Oracle documentation for more information.
SQL> insert into product_user_profile values('SQL*Plus', 'SCOTT', 'INSERT', NULL, NULL, 'DISABLED', NULL, NULL) ;
1 row created.
SQL> commit ;
Commit complete.
SQL> disconnect
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
SQL>
SQL> connect scott
Enter password:
Connected.
SQL>
SQL> insert into emp select * from emp ;
SP2-0544: invalid command: insert
SQL>
SQL>

Print out table desc from sql/plus

Similar Messages

Maybe you are looking for