How to connect from sql*plus to Sql Server
Dear Profs.
How I can connect from sql*plus v8 on my local pc(Win XP) to Sql Server Express 2005 light weight installed in same local pc ?
Thanks,
Ahmed.
You'll need to setup heterogeneous services. This is done by creating an init file for the SQL Server db with %ORACLE_HOME%\hs\admin that refers to a DSN for the Sql Server Database. The listener would also need an entry for the SQL Server DB DSN. After that you would create a dblink to SQL Server in your Oracle instance and then could query across the dblink.
Similar Messages
-
How to connect from Oracle 11g to SQL Server 2008 R2
Hi,
Is it possible to connect from Oracle 11g on AIX to SQL Server 2008 R2? If so, what is the preferred method?
SQL Server has the original table. From Oracle 11g, we want to access data which is in SQL Server real time.
Thank You
SarayuHi,
Have a look at these Oracle notes for the full information on the gateways -
Master Note for Oracle Gateway Products (Doc ID 1083703.1)
Functional Differences Between DG4ODBC and Specific Database Gateways (Doc ID 252364.1)
Gateway and Generic Connectivity Licensing Considerations (Doc ID 232482.1)
How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX) (Doc ID 562509.1)
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
The Database Gateway for SQL*Server (DG4MSQL) needs a separate license but the Database Gateway for ODBC (DG4ODBC) is included in your RDBMS license. You only need to provide the third party ODBC driver needed by DG4ODBC.
Regards,
Mike -
Remote Connection from SAP to MS-SQL server
Hello Experts,
We have been following 2 options so far and we have come across some issues
The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
We have been able to test this scenario successfully from SQL Server side
However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
While calling the stored procedure from the ABAP Code we have an error
The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
"Access to the remote server is denied because the current security context is not trusted."
This issue is new after the SQL Server 2005.
We are trying to resolve that.
Secondly we have been trying the DBCON option as well as per OSS Note 323151
We have a few things thatu2019s impacting our scenario:
The remote servers are in a different domain
The remote servers are located in DIZ
Remote server is a named instance
Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
The Database name starts with a numeric value
Due a combination of factors as mentioned above the standard approach does not work
Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
Thanks in advance,Yes,
DBConnect & UDConnect.
Works like a charm.
We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql). -
How to connect labviewv database toolkit to SQL CE server
Dear sir,
i am using labview 8.2.1 and Database Connectivity 8.2.i need same simple concept of how to connect LV database toolkit to SQL CE Server.When opening the database connection, you will need to provide either a connection string, or a path to a UDL (which will contain a conenction string). The easiest way to get a connection string is to go to (no I am not kidding) www.ConnectionStrings.com. Once there you enter the type of DBMS you are trying to connect to, and the system will list connection strings that you can use based on the drivers that you're using.
How much experience do you have with LV and/or databases?
Mike...
PS: you might also want to check out a series I did a bit ago on database connectivity in my blog. See the link in my signature...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
How to connect from VC++ 6.0 to Oracle 8i
Can anybody tell me how to connect from
VC++ 6.0 to Oracle 8i which is installed
in server (without installing in client)Whats the problem you are facing, from what I see its pretty straight forward. Edit the system object, from 'Show Category' drop down select Internet Transaction Server, hit the modify button at the extreme right and your good to go.
Thanks,
GLM -
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION
HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv... -
How to connect from bw system ecc system.
how to connect from bw system ecc system.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.
hope this helps. -
How to connect from java without using oracle client installation
hi ,
Please tell me how to connect from java without using oracle client
Thanks & Regarshttp://www.orafaq.com/wiki/JDBC#Thin_driver
-
How to establish a connection from java to SAP Netwevare server
Hi All,
As per my requirement i need to create a connection from Java to SAP Netwevaer Server inorder to access the docs from KM. PLZ provide some sample code
(I know how to connect from java to SAP R/3 syatem using JCo connector).
Can anybody help me.
ADV ThanksLook
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6615ea90-0201-0010-be81-e7a300fdf212
/people/rohit.radhakrishnan/blog/2005/05/27/uploading-files-to-km-repository-using-webdynpro-apis -
Crystal report- Connect from SAP gateway to RFC server failed
Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
ChetanHi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan -
Error: Connect from SAP gateway to RFC Server failed
Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM -
Revision: 14635
Revision: 14635
Author: [email protected]
Date: 2010-03-09 02:27:41 -0800 (Tue, 09 Mar 2010)
Log Message:
Adding a sample on how to connect to a DVRCast equiped FMS server.
Added Paths:
osmf/trunk/apps/samples/framework/DVRSample/
osmf/trunk/apps/samples/framework/DVRSample/.actionScriptProperties
osmf/trunk/apps/samples/framework/DVRSample/.project
osmf/trunk/apps/samples/framework/DVRSample/DVRSample.as
osmf/trunk/apps/samples/framework/DVRSample/html-template/
osmf/trunk/apps/samples/framework/DVRSample/html-template/AC_OETags.js
osmf/trunk/apps/samples/framework/DVRSample/html-template/history/
osmf/trunk/apps/samples/framework/DVRSample/html-template/history/history.css
osmf/trunk/apps/samples/framework/DVRSample/html-template/history/history.js
osmf/trunk/apps/samples/framework/DVRSample/html-template/history/historyFrame.html
osmf/trunk/apps/samples/framework/DVRSample/html-template/index.template.html
osmf/trunk/apps/samples/framework/DVRSample/html-template/playerProductInstall.swf
osmf/trunk/apps/samples/framework/DVRSample/readme.txttry this:
Start FMS
put the FLV into the "applications\test\streams\_definst_"
folder
Create a SWF that will stream the FLV
The easiest way to create this SWF is to use the FLV Playback
Component in Flash 8.
Or, Sample Code:
http://www.adobe.com/devnet/flash/articles/flv_download_04.html
and some templates:
http://www.adobe.com/devnet/flash/video_templates.html
the SWF should connect to rtmp://localhost/test/ and stream
your FLV, just like with Progressive Download FLV
the SWF can run from your desktop or on a local web server
such as Apache - it should NOT be in the FMS application folder.
Open the SWF, and your video should stream.
hope this helps.
-steve. -
FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0. -
ORA-03113 while connect from 8i client to 7 Server
Hi,
I have a Oracle 7.3.3 Server running on a SCO OpenSever 5.0.5 and a Oracle 8i Client 8.1.6.0.0 on a RedHat Linux 6.2.
When I try to connect from the client to the server by issue command "sqlplus user@test", it responses me "Error while trying to retrieve text for error ORA-03113". But when I run "netasst" to test the connection, it says the connection was sucessful.
Can anyone help? Here are my configuration files:
Listener.ora on Server side:
LISTENER=
(ADDRESS LIST=
(ADDRESS =
(COMMUNITY=TCP.world)
(PROTOCOL=TCP)
(Host=10.128.64.52)
(Port=1526)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST=
(SID_DESC =
(SID_NAME = test)
(ORACLE_HOME = /usr/app/oracle/product/7.3.3
(PRESPAWN_MAX=10)
tnsnames.ora on client side:
TEST.888.COM
(DESCRIPTION =
(ADDRESS_LISTS =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = 10.128.64.52)
(PORT = 1526)
(CONNECT_DATA =
(SID = test)
)Hi,
I don't have a 64 bit instance, but maybe another test will be usefull, try to get a connection with sqlplus on the server but via sqlnet like "user/passwd@tnsentry" I think if that also is not possible it is not the 64 bit issue but more that the listener itself coundn't etsablish a db connection, be aware tnsping is only testing if the listener is running and do not check if the listener is able to connect to the db.
Hope this helps a little to find your real proble ;-), Olaf -
Cannot connect from iMac to Windows Home Server 2011 shares
Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
SimiYou need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work. -
Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System
Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636< RfcException: [null]
message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR hostname 'cpe1601' unknown
TIME Mon Jul 14 16:20:25 2014
RELEASE 740
COMPONENT NI (network interface)
VERSION 40
RC -2
MODULE /bas/740_REL/src/base/ni/nixxhl.cpp
LINE 193
DETAIL NiHLGetNodeAddr: hostname cached as unknown
COUNTER 3
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
E16 System:
SID: E16
Client: 800
System Number: 01
Server: cpe1601
Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
User: ********
Password: ********
SAProuter String:
If you don't plan to use SAPRouter at your end,
/H/155.56.49.28/H/
Maybe you are looking for
-
PDF Printing issue (passing static items)
Hello experts, I am starting out with PDF printing from Apex and have a small (I hope) issue. I have downloaded a demo from Oracle site and all works OK. To test the ability to create my own RTF templates I have added an additional item on the page c
-
Not getting correlation exists exception
Hi, SOA Suite 11.1.1.6, BPM project I have created a test project with one BPM process with one human task. I have created a correlation from the string (also tried with int) argument passed in and when I test it allows me to create 2 instances with
-
If we want to create an on-line art gallery using the java programming,so what should we want to include inside it and what is the first step we should do before we try to write the program.
-
How to generate dynamic selection-screen?
Hi all, I have two radio buttons on selection-screen. If user-selects the one, Then under the radio button another parameter should be displayed if he selects another radio button, the previous parameter should not be displayed and another parameter
-
Mysql without odbc call library function node
hy! i'm trying to send a SELECT query to a mysqlserver by calling the needed functions in libmysql.dll i get a successful connection and can read the server-version, but the result of the query which should be something like DATETIME|INT|INT and so o