Print quote - right way?

I need to put together a quote for a job which will involve design/production/printing.
The print part of the job may just be 4 colour - text, shapes, photos, diags. But it's possible that the client wants to use Pantones for the 5 sections of the booklet, so 4col plus 5 Pantones. All would be on recycled uncoated stock. Copies would be one of 25k/50k/80k.
Is it worth doing it like that? Or will it cost a fortune?
What would be the alternative? Would it be cheaper to use 4col instead of 4col+5 Pantones? Would I be able to get CMYK values to print close to the Pantones to keep the costs down?
Also I'm very aware that this quote is not just one single option, rather multiple. The client wants either 28pp or 32pp, and with all the possible quantities that represents a fair bit of work for the Print bureau to put a quote together - about 12 options, I think. Are bureaux usually OK with doing that many options for a quote? Are am I going to get some attitude?
Any comments/advice much appreciated. Thanks.

Try to get as many of those questions answered before you proceed. The colour option is probably one you'll only be able to answer with a quote, so leave that one. You have probably not asked for many quotes, given your questions, so you probably don't have a go-to printer or a strong relationship with any sales people at a print shop. That, plus all the options you'd want, will likely make your RFQ (request for quote) a low priority. Are you the designer? If so, take charge of some of the job and pick the stock. That will narrow the options.
Has a printer already been contracted, or has the client specified a printer? If so, then you should get a quote from that printer. If not, then shop it around, but also make sure you are getting a quote, not an estimate.
Ask for the numbers both ways, and remember to hold back a few dozen copies for yourself. Also be clear with the printer how many colours are needed on press. It sounds like each section is CMYK+1, with five sections. Make that clear, or they might think you are asking for nine plates per page. Binding, too is important. 28 or 32 pages will probably be saddle stitched, but specify whatever it will be. Is the cover a separate stock? Try to be as thorough as possible, including if you require a press check or press proofs and how the files will be provided. Don't beat your brains out, though. The printer has prepared thousands of quotes and doubless been burned more than once for missing some vital detail. If you miss anything important, they'll ask.
I much prefer letting the printer bill the client and adding my effort as simple logistics in billing the job. If you're the printer's client and you're billing your client for the printing then you have to decide how to mark up the job. One way (which I consider sleazy) is to opaquely bill for a larger amount and pocket the difference, never revealing the true amount. The client may never know how much you really paid for the printing and thus how much you marked it up, but I think it's not as honest as the alternative. The alternative is to mark up the printing my a small percentage or add a flat markup and include the true printing cost in your bill, even including a copy of the invoice.

Similar Messages

Print Quote the report is in PDF but need to be new RTF template

We have 11.5.10 apps, the Quote screen is an OAF screen.
When clicking Print Quote the report is in PDF, They want to include a new RTF template for printing instead of PDF.
The new RTF template is created. But what I do not know is how the quote screen will take the new template. I can use XMLP to upload the RTF template but that may not be sufficient to make it appear in the Quote screen.
I am looking at the profile ASO:Default Layout Template. Am I headed the right way?

Hi,
Please refer to the following documents, it should be helpful.
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1
Regards,
Hussein

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

YES! How to make PRINT QUOTAS WORK with 10.4

How to make PRINT QUOTAS WORK in 10.4
After struggling for quite some time, I finally found a pretty simple way to make print quotas work.
First, I’ll tell you our setup. We have 3 different computer centers with a variety of eMacs and new Intel iMacs, all clients are running 10.4.8, and each of those 3 centers has its own HP Laserjet 4200 printer. Our dual G5 server is running Server v.10.4.8. Client computers and printers have static IP addresses. All clients are bound to the server with the standard WorkGroup Manager/ LDAPv3 Directory Access scheme - such that all students login to the clients with their network username/password to mount their home directory on the client.
Next, I’ll tell you what does not work. IF YOU WANT PRINT QUOTAS TO WORK, you cannot use Workgroup Manager to assign a printer to any managed user account, user group, or computer group. Why? Because when you go to a client, and Show Info on the printer that is being pushed by Workgroup Manager, you’ll see that the queue name is not the queue that you’ve setup in Server Admin. Instead, you’ll see the queue name is “MCX” or something along those lines. Even if you manually edit the Workgroup print preference file that is being pushed to clients, it still will not work.
Drawbacks of my technique: In my case, students will see all 3 printers (1 from each lab) available to them no matter which lab they are in. Not the best, but for now I think it’ll be worth it to be able to control wasteful printing. Students may be able to move/delete the preference file (see below), but they’ll only be hurting themselves, as they won’t have any printers at all then.
Okay, here’s how I did it:
1. If you have setup any printers to be pushed out via Workgroup Manager’s preference enforcement to individual users, usergroups, or computer groups, turn those preferences off and leave them off.
2. Delete any existing printers in your Printer Setup Utility and/or Server Admin. Add and setup a new printer queue using the Server Admin> Print service. I added the printer through the Server Admin application, not Printer Setup Utility (may not matter). However, I did go into that latter utility to set the model of the printer. Now, back in Server Admin, edit the printer queue to turn on these services IPP, LPR (bonjour off), and of course check off the enforce quotas box. (No student Windows clients, so I didn’t tinker with SMB print service). I went ahead and specified the standard cover sheet – it will be handy while troubleshooting.
3. In Workgroup Manager, select the users that you want to enforce quotas upon, go to the Printer Quota tab (not the preference pane) and, in my case, I selected All Queues and specified a quota, and clicked Save.
4. Delete all printers that appear in the Printer Setup Utility from each client computer (I know, UGH).
5. For all network users, you need to edit a preference file and put it into each user’s home directory. That file is “com.apple.print.favorites.plist” and as you guessed, it needs to go into the Library> Preferences folder of every one of your network users’ home directories. Now, the content of that file is crucial… what it should show is the name of the queue(s) you created in Server Admin above, and be immediately followed by an “@” and the address of the server that is hosting that queue. For example, my queue’s name is TCStudentQ and the server’s address is student.mydomain.org… so my preference file has this entry: [email protected]. If you have more than one queue, you’ll have more entries. Be sure that the network user has at least Read level access under Group or Others. I’d recommend making the server System account the Owner of the file, and be sure to lock the file so the users can’t easily trash it. If you don’t know how to create this file in the first place, what you can do is go to a client computer, and log into the client with a dummy network account. Then open Printer Setup Utility, and you should see the queue you created in step 2. Add that printer, and then the file will be created in your dummy account’s home directory under Library> Preferences. Now you can use that file to distribute to other user’s folders… but don’t forget that each user needs Read level access.
6. That’s it. Works for me. When they exceed the quota, all that spits out is the cover page. It’d be nice if there was a quota monitor utility on the client side so users can see how many pages they have remaining and when the quota will automatically reset. I plan to start the quota on a Monday morning and go on a weekly duration. Not sure what a good starting point is… perhaps 25 pages every school week.
7. Hey Apple Computer, Inc. Server Developers & Project Managers, I truly hope you’re reading this and can explain why print quotas don’t function as you have documented and advertised. I don’t mean to toot my own horn, but I’ve spent way too much time discovering this workaround, and I know it will help thousands of others with the same problem. I can see where your Print Quota system breaks down, and I think you need to fix these issues or at least document them. Don’t forget to fix serious 10.4 Server bugs before leaving it behind for 10.5 Server – many of us will continue using 10.4 Server for at least another year or two.

David,
Your assumption that I didn't read the documentation is incorrect. I read that 10.4 documentation over and over - followed it to the letter to no avail. Perhaps it was updated in the last few weeks? So, do you have a fully operable printer quota system in conjunction with a managed computer or user group that has a managed printer pushed to the group via Workgroup Manager? I can push a managed printer to a managed group without a problem, but the quotas won't be enforced unless I use the workaround above and cut Workgroup Manager's managed/pushed printer out of the picture.
I know this is a user-to-user forum - however, I'm also aware that Apple tech support often chime in here, so it doesn't hurt to post a message to them in the context of a larger posting about a 'known issue'. I have used the server feedback form... hasn't seemed to me to be very helpful in the past.

How to create a custom panel in the right way (without having an empty panel in the file info) ?

Hi Everyone
My name is Daté.
I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
The main idea is to (Theory) :
create custom panels used by fashion designers to classify their design files.
Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
Find someone to make a script able to export metadata in xml files
Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
Here is the process :
I have installed flashbuilder 4.6
I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
In Flashbuilder, i have created a new project and select xmp Custom panel
The new project is created in flashbuilder with a field with A BASIC Description Field
To generate the panel, right click the project folder and select xmp / Publish Custom Panel
The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
Go to illustrator, Open the file Info
The panel appears empty
The others panel are also empty
The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
It seems that many peaople have this issue, but i dodn't find a solution in the forum.
I try to create a trust file (cfg), but it didn't work.
It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
Thanks a lot for your help,
Best regards,
Daté

Hi Sunil,
After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
There is 2 different ways, the first described below is not working whereas the second is fine :
METHOD 1 :
I have downloaded the XMP-Fileinfo-SDK-CS6
In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
The plugin install an XMP project
In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
A new xmp project is created in flashbuilder.
You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
I try this way several times, with no good results.
METHOD 2 :
I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
The second method seems to be the right way.
For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
Sunil, as you belong to the staff team, can you tell me if there is :
A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
A plugin to allow indesign to get custom XMP in live caption
A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
How can you print the XMP data with the thumbnail of the file ?
Thanks a lot for your reply.
Best Regards
Daté

XML File for "Print Quote"

Hi,
Since we'r doing a customization on the Seeded "Print Quote", Is there any possible way to retrieve the XML file (Source file) for the "Print Quote"?
Thanks in advance,
Muru

Muru,
I too have the same requirement of customising the quote report.
Could you please let me know which approach u are taking, i mean customising the RDF report and its template or the xsl-fo template.
As far as I have understood from the docs, we can either customise the ASOPQTEL.rdf and its layout or customize the seeded xsl-fo ie, ASOPRINT.xsl.
Just an idea, probably you can run the ASOPQTEL.rdf and take the xml output.
Satrajit

Print Quote Report

Hi All,
I have a requirement to develop the custom print Quote Report. When i review the standard pring quote report ,I found a call like <?call-template:TermsTemplate?>.
This statment itself is getting all the Terms and Conditions for that report. when i looked in the ASOPRTXSL.xsl, I see the below statement
<xsl:template name="TermsTemplate">
<xsl:call-template name="PrintContractTerms"/>
</xsl:template>
I am pretty new to XSL, dont know what's happening here. Please help me ASAP
I have also posted this question in BI Publisher but did not get any respose . Please Help
Thanks

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

Queation Regaring Print Quote Report

Hi All,
I have a requirement to develop the custom print Quote Report. When i review the standard pring quote report ,I found a call like <?call-template:TermsTemplate?>.
This statment itself is getting all the Terms and Conditions for that report. when i looked in the ASOPRTXSL.xsl, I see the below statement
<xsl:template name="TermsTemplate">
<xsl:call-template name="PrintContractTerms"/>
</xsl:template>
I am pretty new to XSL, dont know what's happening here. Please help me ASAP
Thanks

Can anyone answer this please. This is urgent . Thanks

Questions on Print Quote report

Hi,
I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
Thanks and Appreciate your patience
-PC

1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
This is detailed in many threads.Thanks
Tapash

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Dynamically set template for Print Quote report

We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AM

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

Is it possible to call the Print Quote functionality from Custom ADF page

Hi,
We are researching if it is possible to call the Print Quote functionality from the Custom ADF application.
Goal is to pop up the PDF report upon clicking the Print Quote button on the custom page. Is it possible ?
Atleast advice on the direction to go forward is appreciated.
Thanks
Sai

Hi ,
Please check following thread on forum -
Re: ADF: Calling OAF Page from ADF page
Check this may also be useful-
https://blogs.oracle.com/shay/entry/to_adf_or_oaf_or
I have not tried yet but Steven Chan (Sr. Director OATG) suggest following methodolgy for this-
https://blogs.oracle.com/stevenChan/entry/appsdatasource_jaas_ebs
Thanks,
Ashish

Customize Print Quote stylesheet ASOPRINT.xsl

Hi,
I have a requirement where I need to check if we can use the existing Print Quote functionality to generate custom Quote Reports. As i see we can create new XML templates by making changes to the standard style sheet ASOPRINT.XSL. According to what is mentioned in the oracle quoting guide we can add company logo, change height width etc.. of the report by modifying this style sheet. I need to know how do we cusomize the style sheet to include static text or add new tables etc.. I am very new to XSL so do not have much idea as to where is the data fetched from and where is the static text present.
Thnaks
AM

Hi,
Thanks a lot for the response. I went through the documents and they mainly talk about customizing the Quote report by including the company logo, Title and disclaimer. How can we add static text to the ASOPRINT.XSl style sheet in order to customize it and attach it to a custom tempalate. I am very new to this so do not have much idea. can we add the static test directly in the style sheet or is it fetched from somewhere?
Regard
AM

The "right" way to handle multiple devices, accounts and the cloud?

Perhaps a bit premature, but I figure it's never too early to start planning.
Here's our current setup - I currently have four iDevices in the faily (three iPhones and one iPod Touch. All are syncing to the same Mac Mini, albeit with different logins (and different iTunes store ids). All four of these are kept in sync via Home Sharing so we have access to the music/apps/etc acquired by the others.
Enter the iCloud - how does this fit in? What's the *right* way to do this?
I can see two options:
1)     Continue to utilize four iTunes store ids, sync them via Home Sharing and add four iClouds
     Advantages
          totally independent devices, users, etc.
     Disadvantages
          must pay for four "iTunes Match" services to access non-iTunes music on each of the four devices
          will iTunes-purchased music automaticaly sync to iCloud if it is shared via Home Sharing (or only by the original purchaser)?
2)     Use one iTunes Store id for all iDevices
     Advantages
          single point of acquisition and distribution for all devices
     Disadvantages
          need to find a way to merge IDs (is this even possible?)
Are there other advantages/disadvantages to these options? Are there other options? What's the easiest to set up and support? Any other thoughts?
Thanks in advance for your input.

Well it seems like the first thing you should do is consolidate your iTunes libraries so that you don't have 4 copies of everything, one for each user logged in to your Mac Mini. How you do that is consolidate all 4 iTunes folders to one folder located in the /Users/Shared/ folder and update each of your iTunes to point to that folder accordingly. That way you have one iTunes library, only one copy of your media, but accessible from multiple users.
One caveat is that if somebody is logged on and has iTunes open, you can't fast switch to another user and open iTunes. Apple made it so that only one user and one instance of iTunes can open a iTunes library at a time.
For your iTunes match situation, it does sound like you would be much better off sharing a single Apple ID with one iTunes Match. For consolidating, make sure you have everything everybody has shared via Home Sharing to the main account you'd like to move over to, and then simply go to each device Settings, Store, and the sign out of the original Apple ID and logon using the shared main Apple ID. I just looked at it and the automatic downloading is already live in iOS! You can specify if you want to do music, apps, and books separately in case you may want to automatically download music but not apps or books.

Problem with slideshow in iPhoto. Photos look like they are all the right way up but when in slideshow action some are sideways.

even though all photos look like they are the right way up, when the slideshow commences, some of them display sideways. I have tried re-rotating them - and still have same problem. Help please - need it for Saturday night !

What version of iPhoto are you using? Are you creating the slideshow directly from an album or are you using the slideshow mode?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

Print quote - right way?

Similar Messages

Maybe you are looking for