Print Settings are not saved on IE8

Hi,
I have an issue with IE8 on WinxP. One of the Team prints envelopes from a web based application. But the settings wont stay for the print immediately as advised below.
Users need to select a certain size of envelope every time they print via web-based application (Internet Explorer). We are trying to resolve the issue so that Internet Explorer remembers
their last selection. They are currently selecting DL Envelope each time they print.
Ozescribe(the application) initially wanted us to change the driver on the server to resolve the issue. We changed the driver but the issue still remains. The original driver has been put back.
Please advise of any better solutions

Hi,
try tools>ActiveX Filtering (or click the blue circle icon that appears in the Address bar)
contact http://ozescribe.com/ (phone numbers and address at bottom of the landing page)
their web page is incorrectly detecting the installed Adobe Flash version.
Content on this page requires a newer version of Adobe Flash Player. - See more at: http://www.ozescribe.com.au/#sthash.Q2NpsoA4.dpuf
when asking a question please include the Full address of any websites you are having issues with.
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com
Rob^_^

Similar Messages

Settings are not saving

Hi Guys
I am fairly new to my iMac (since Christmas). Everything was working perfect and now I am noticing that my settings are not saving. Some examples are:
1. I set it so my pictures can be shared with other users. The other users of this mac still cannot pull up the pictures in their iPhoto.
2. I have the settings for software update set to check monthly. Every time I wake up my computer it checks for updates automatically.
3. The log in settings are set to log in without a password every time I wake up the mac and it still requires a password.
What is going on??? It is so frustrating, please please help???

So even after opening iPhoto, there is no file "com.apple.iPhoto.plist" in your ~/Library/Preferences folder (that is in your HOME folder, NOT the Library folder at the top level of your hard drive)?
If so, there is an issue with permissions to write to your ~/Library/Preferences folder. Go up one level to your ~/Library folder (again, the one in your HOME folder), click once on Preferences folder, then chose menu File>Get Info. At the bottom of the Get Info window, next to your user name, the Privilege column should say Read & Write.
If it doesn't say "Read & Write" next your name, you have to change it so that it does. Click on the lock icon in the lower right of the "Get Info" window, enter admin user name and password. Change the Privilege column next to your user name to "Read & Write." Then click on the little gear icon at the very bottom of the Get Info and select "Apply to enclosed items."
You might want to go through that procedure even if it does say "Read & Write" just to make sure, because it really sounds like you have a problem with permissions in the Preferences folder.

With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
Any help would be appreciated as this is so frustrating!!

Update to 3.6.16 has fixed this problem.

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

Sorry Photoshop -- Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
Thanks, Al

Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

Mail settings are not saved any more

Hi,
after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
I hope there is a chance to fix this problem.
Thanks for help.

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

Form settings are not saved on one client

Hello,
What are possible reasons that form settings like size and position are not saved.
I have one client with SBO 8.8 PL15 installed. On this client this settings are not saved.
So the user has to resize the forms everytime he opens it.
I tried it myself with his SBO user directly on the server and a terminal-server. No problems there, all settings
are saved even if i switch between the systems.
If i am correct these settings are saved in the UserPrefs field in the OUSR table.
Any ideas?
Thank you for all your help.

Hi,
Have you searched the forum?
You may check this to start:
User Settings lost after session is released
This setting is related to client.
Thanks,
Gordon

Server settings are not saved on client

The client has a new workstation (Vista) where the server settings are not saved. The client is able to login but have to setup the server settings overtime she logs on to SAP B1.
Client: Vista
SBO: 2007A SP01
what is causing this and how can this be resolved?

You may check these threads first:
Re: Server name in Change Company does not stay
Re: SQL Connection to SAP Reset
Thanks,
Gordon

Early 08 MBPro-TCP/IP settings are not saved

On my home wireless network I have MAC address filtering enabled and broadcast SSID disabled. All MAC addresses are entered in the router's filter. An early 08 MBPro does not retain network settings for Verizon router on the network. When I look at the TCP/IP settings in network prefs I see they are nothing like other computers on my home network. If I click "assist me" then "diagnostics" in Airport setup I get walked through a process which allows me to choose the network I want to join. There is a list of available networks which does not include mine (since SSID is disabled) and a button which allows me to choose closed network, which I take. After entering my network's ID and WEP password I finally get connected and get a message that my connection is OK. Problem is, when I put the computer to sleep or restart I can't reconnect and the old settings which don't work reappear. It appears that the TCP/IP settings are not being saved. Could this be some corrupted preference of does it sound like a hardware problem? Thanks for any insights.
Message was edited by: Thomas Camilleri

Odd. You may be able to repair this with the 10.5.7 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
Oh, and please be sure to re-boot your modem and router.
-mj
Message was edited by: macjack

PROBLEM FLASH : settings are not saved

Hello,
I have a problem with flash recently, i'm using a PPC G4 1,5
GO RAM version osX 10.4.10 2x1 GHZ ( firefox 2007 ), when i want to
set preferences of Flash on the site of adobe it's always getting
by defect preferences when i reload the page for any settings, they
are not saved, i re instal Flash and i clean up cash etc etc but
nothing .... i can't use some softwares and it's tidious .....
Help, thank you .

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

"Print Settings" are not stored in the print preset

Hi everybody,
It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.
I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).
I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).
I reselect the correct setting from "Print Settings..." (Color).
Click "Save" again.
Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.
I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.
Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
Epson R3000, latest OS X Epson Drivers.

I may have resolved the issue.
The bug is there, because the name of the preset is kept as the last used, which is wrong.
If you revert to the default "Default Settings" Epson preset, and change all the parameters as you like, then click Save and update the Lightroom preset, the settings are stored correctly.
You'll have to check every preset (I have two dozens) and re-update with the new correct (or wrong?) Driver configurations, so that you could have faith again in the "Print One" button.

Distribution settings are not saved in a .cds file

I have successfully created a distribution for my CVI8.0 application, and deployed it with no problems. However, although the settings work, a .cds file never gets created - I checked in the directory. When I close CVI and start it up again, it complains that the .cds file is missing. My distribution settings are gone, and I have start all over again, from 'Manage Distributions > Add' etc.
I want to be able to save my distribution settings.
The only way I have found to make CVI create a .cds file on the disc, is to go through the process, then click 'remove'. Then I get a prompt 'Save changes to the distribution?', when I click yes, the file gets created. After that, I can add it back in again. Is this a bug or am I doing something wrong?
Dave

Hi Dave,
In 8.0, the expected behavior is that any new/editted distribution is saved to disk (as a .cds file) when you OK the Manage Distributions dialog. It is also saved if you edit it from the Distributions>>Edit <name> menu item. I am unable to naively reproduce the problem you describe. Even looking at the source code, there is not an obvious scenario that might produce the behavior you describe.
If you could check a few things for me, it might help me figure out how this is happening.
1. Confirm that you have CVI 8.0 (not 8.0.1).
2. What is the path of the .cds file? Is there anything noteworthy about this path or the drive?
3. Try creating a distribution for one of our shipping samples (e.g. CVI80\samples\apps\finger.prj), and see if you have the same problem.
4. Make sure this happens even when you don't edit or build the new distribution. That is, hit the New button on the Manage Distributions dialog, OK the New Distribution dialog, OK the Edit Installer dialog, and OK the Manage Distributions dialog.
Also, please let me know your OS version and what other NI software, if any, you have installed.
Thanks.
Mert A.
National Instruments

Firefox v30 Privacy settings: Use customs settings are not saved

After changing privacy settings to
-> Use custom settings for history
[X] Always use private browsing mode
[_] Remember my browsing and download history
[_] Remember search and form history
[X] Accept cookies from sites
Accept third-party cookies: [Always]
Keep until: [I close Firefox ]
When exiting Firefox and relaunching it, this settings is gone.
and 'reset to [Remember history]
Any suggestions as to how to solve this?
Thanks
=

Sorry, to reset firefox will require me to install a number of plug-ins.
All my settings were lost.
Luckely I created a backup using MozBackup.exe.
Some add-ons can easily be re-installed, but what about stuff like Acrobat PDF creator and Norton Vulnerability Protection. I think those add-ons are installed when an application is installed, so it would require me to re-install such applicatons.
Preferences not saved: nothing is write protected.
Deep sigh...
=

User Settings are not saved

Hello,
I am setting the values in User settings. It is sucessfully changedand saved, but the changes are not appearing while creating the shopping cart. In pposa_bbp also the value is maintained as default.
We are in SRM 5.0 classi scenario. Please let me know how to overcome this issue.
Regards,
Chary

Hi
Please try saving the user defaults in Web page by using
the transaction BBPUM01 / BBPUM02 for saving user defaults.
<b>In a productive EBP environment, you should run the program
CRM_COM_ORGMAN_BUPA_INTEGRATE on a regular basis, in
order to carry out automatic periodic matching.</b>
Alternatively, as Disha told, try executing the report as well.
Incase it does note helps, please raise an OSS message with SAP.
Regards
- Atul

Xserv - user settings are not saved - help!

I've noticed that user settings do not get saved under OS Xserv...
Whenenver I login I get the default dock, with all the admin icons missing!
The desktop is saved in the root as /desktop/. (?!?)
When the machine was installed the first user was setup as Administrator (Admin) but it was deleted (against my sound advice) and since then things like the FTP server malfunctioned... The keychain seems to pop up a lot as well, and can't be opened / used. And the bookmarks don't get saved as well.
I'm assuming that user settings like the Dock should be saved somewhere.
Please help!
Everything else seems to be running but loosing all UI configurations at log-offs is taking a lot of time which I currently don't have enough of.

Anyone?
I was hoping that I'd get an answer through the forums.
I'll wait till next week and if there's still no post I'll contact Apple's Phone support.
Please post any suggestions - a Mac Server shouldn't be so fragile!

Print Settings are not saved on IE8

Similar Messages

Maybe you are looking for