Print smarform to a non-default printer?

I am writing a print program to manually print a smartform.
Which means, no SAP output message is involved.  No entry created in the table NAST.
I assigned the printer short name to the output_options-tddest.  It only prints if the printer is same as the user default printer in the user profile.
Any one has experience on how to print a smartform to a non-default printer?
Thanks a lot.
Margaret Chen

Do not worry about this question.  The cause is that I misspelled the export parameter.
Sorry.
Margaret Chen

Similar Messages

  • JVM crashes when selecting non-default printer in ReportViewer in NATIVE dialog.

    On ReportViewer frame i have the print button active.  If i click the print button (Native dialog) and select a printer other than default printer, the JVM crashes.  Any idea how to fix it?
    Thanks

    I wanted to provide little history of what I am trying to achieve.  Currently, I have the following code:
    PrinterJob printJob = PrinterJob.getPrinterJob();
            if (printJob.printDialog()) {
                String printerName = printJob.getPrintService().getName();
                String printJobName = printJob.getJobName();
                PrintReportOptions printOptions = redirectPrinter(printerName, printJobName);
                sendReportOutputAndClose(reportClientDoc, printOptions);
    I want to capture the number of copies user selects from the dialog.  When I do printJob.getCopies(), it always returns 1.  Not sure how to get that # of copies user selected.  I also wanted to the dialog to be in Native mode because I don't want to give access to modify Margins and other page properties which are part of COMMON dialog mode.  If I create the dialog printJobAttribute.setDialog(JobAttributes.DialogType.NATIVE); then VM crashes when selecting a non-default printer but I am able to get the number of copies.  The key is I need to use NATIVE dialog and get the number of copies.  One option is to display in COMMON dialog mode and then hide the "Page Setup" and "Appearance" tabs.  Can this be done ?  I am new to Java and Crystal so any suggestions would help.

  • Problems with sending a report to a non-default printer

    When sending Escape-codes to a non-default Windows printer the printer doesn't accept them.
    For example sending a report to a fax-printerdriver which is not set as default doesn't seem to work.
    It's therefor also not possible to send a report to a non-local printer (non-default) which contains invoicepaper and that needs it's paperlength to be adjusted.
    I hope someone can help me to solve this problem.
    Gijs van Kooten

    hello,
    it is kind of hard to determine your exact problem without any further information.
    however, it might be a good idea afterall to contact oracle support services in this matter.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:

    Hi,
    Im having a problem on my 2801 router, my fxo and fxs port are not fucntioning, when i check the dsp it shows below; i have tried different ios still the same problems encountered.
    rtr01#show voice dsp detailed
    edsp 0001 01 g729r8 p  0.1 IDLE  50/0/1.1
    edsp 0002 01 g729r8 p  0.1 IDLE  50/0/5.1
    edsp 0003 01 g729r8 p  0.1 IDLE  50/0/6.1
    Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:
    This is not recommended, the IOS default version is 24.3.0
    ----------------------------FLEX VOICE CARD 0 ------------------------------
                               *DSP VOICE CHANNELS*
    CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
    LEGEND     : (bad)bad    (shut)shutdown  (dpend)download pending
    DSP   DSP                 DSPWARE CURR  BOOT                         PAK   TX/RX
    TYPE  NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
    ===== === == ========= ========== ===== ======= === == ========= == ==== ============
    C5510 001 01 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 02 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 03 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 04 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 05 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 06 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 07 None           0.0.0 bad   idle      0  0                 0          0/0
    C5510 001 08 None           0.0.0 bad   idle      0  0                 0          0/0
                               *DSP SIGNALING CHANNELS*
    DSP   DSP                 DSPWARE CURR  BOOT                         PAK   TX/RX
    TYPE  NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
    ===== === == ========= ========== ===== ======= === == ========= == ==== ============
    C5510 001 01 {flex}         0.0.0 free  idle      0  0 0/0/0           0          0/0
    C5510 001 02 {flex}         0.0.0 free  idle      0  0 0/0/1           0          0/0
    C5510 001 03 {flex}         0.0.0 free  idle      0  0 0/2/0           0          0/0
    C5510 001 04 {flex}         0.0.0 free  idle      0  0 0/2/1           0          0/0
    ------------------------END OF FLEX VOICE CARD 0 ----------------------------
    #sho voice port summary
                                               IN       OUT
    PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
    =============== == ============ ===== ==== ======== ======== ==
    0/0/0           --  fxs-ls      up    dorm on-hook  idle     y
    0/0/1           --  fxs-ls      up    dorm on-hook  idle     y
    0/2/0           --  fxo-ls      up    dorm idle     on-hook  y
    0/2/1           --  fxo-ls      up    dorm idle     on-hook  y
    50/0/1          1      efxs     up    up   on-hook  idle     y
    50/0/5          1      efxs     up    up   on-hook  idle     y
    50/0/6          1      efxs     up    dorm on-hook  idle     y
    PWR FAILOVER PORT        PSTN FAILOVER PORT
    =================        ==================
    can somenone help to advice. th

    Hi,
    I see that the DSPware version says 0.0.0 and the current state shows "BAD" which should not be the case. Are you running 12.4(24)T IOS because i see that the default version of DSP should be 24.3.0 as printed in the output. By default the IOS itself contains the default DSPware in it but if it does not show up in your router, try reloading the router to see whether it fixes your issue. If not check the following link which lists the steps to be followed to install a new DSPware on your router.
    http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080a7af82.shtml
    Hope that helps
    Regards
    Nitesh
    PS:pl rate helpful posts

  • Creating a Global Temporary Table on non-default TEMP tablespace.

    Hello ,
    I am using Oracle 11g.
    I have a procedure which create global temporary tables for its functionality. As the data which is going in the global temporary table , mean the data which is going in the default TEMP tablesapce is too huge ..... billions of rows..
    So what i want to do is , I want to create the global temporary table in another TEMP2 tablespace ( which is not the default one) so the load of billions of rows of data will be shifted to TEMP2. The default TEMP tablespace will not be affected and it can be used for other transactions.
    Is this possible. Can i shift the global temporary table from TEMP( Default temp tablespace) to TEMP2 ( the non-default temp tablespace) ????
    Please guide me with proper solutions and examples ....
    Thanks in advance ..

    DBA4 wrote:
    Hello ,
    I am using Oracle 11g.
    I have a procedure which create global temporary tables for its functionality. As the data which is going in the global temporary table , mean the data which is going in the default TEMP tablesapce is too huge ..... billions of rows..
    So what i want to do is , I want to create the global temporary table in another TEMP2 tablespace ( which is not the default one) so the load of billions of rows of data will be shifted to TEMP2. The default TEMP tablespace will not be affected and it can be used for other transactions.
    Is this possible. Can i shift the global temporary table from TEMP( Default temp tablespace) to TEMP2 ( the non-default temp tablespace) ????
    Global temporary tables are instantiated in the temporary tablespace of the schema that inserts the data - not into "the default" temporary tablespace.
    Assume Schema1 creates a GTT and grants all on that table to schema2
    Assume schema1 also creates a procedure (authid owner, the default) to insert data into the GTT and grants execute on the procedure to schema2
    If schema2 executes: insert into schema1.gtt, the data will appear in the temporary tablespace of schema2
    If schema2 executes: execute schema1.procedure, the data will appear in the temporary tablespace of schema1
    So if you want to protect the "normal" temporary tablespace, you could just create a special temporary tablespace for the owner of the procedure.
    Regards
    Jonathan Lewis

  • How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

    Hi Team ,
    We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
    But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
    We are using 1900 port for existing 11.2.0.1 grid infra scan.
    While up gradation it is taking default port of 1521 insted of existing port 1900.
    Please provide the solution to use non default port while 11.2.0.2 up gradation.
    After upgrade the status as below.
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
    Here I was getting TNS:no Listener errors from the client connections.
    I have modifyed the scan port then it is working fine.
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
    grdoratst104:/apps/grid/grdhome:+ASM4>
    Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
    Thanks
    Bala
    Edited by: user12032334 on May 31, 2011 11:46 AM

    Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
    So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
    As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
    This can be fairly easily done using iptables if your o/s is Linux. You need to:
    a) create a pre-routing NAT rule
    b) create a post-routing NAT rule
    c) create a forwarding filter rule for port 1900/tcp
    d) create an input filter rule to accept traffic on 1900/tcp

  • I set my iPhoto to save photos to a non-default location.  Now I can't find my iPhoto albums in iTunes, even when looking in my non-default location in the "Sync Photos from" menu.  How do I fix this?

    I set my iPhoto to save photos to a non-default location.  Now I can't find my iPhoto albums in iTunes, even when looking in my non-default location in the "Sync Photos from" menu.  How do I fix this?

    When you launch iPhoto with the option key depressed you'll get this window:
    Click to view full size
    All libraries on your hard drive (and on external drives) will be listed and the currently used library will be listed as (default).
    OT

  • I have two libraries within iPhoto, however can't find or open the non-default library and can't find a way to even locate the non-default library.

    My iPhoto software got set up with two separate libraries of photos, one marked as default.  I have saved photos to the non-default library, however now can't seem to find a way to open the non-default library.  Every once in a while when I open iPhoto it will ask me, but usually it just opens the default library.  How can I open the non-dafult library of photos?

    When you launch iPhoto with the option key depressed you'll get this window:
    Click to view full size
    All libraries on your hard drive (and on external drives) will be listed and the currently used library will be listed as (default).
    OT

  • Manual login to Non Default DB with SSO enabled

    Hi,
    I logged the following through SAP Support, but was advised that Single Sign-On was functionining as designed.  The issue is that the non-default database does not have a manual login page, whereas the default database does.  This is an issue for us, because we have two completely separate database, and cannot allow a User with a Windows AD account to login manually without disabling his Windows AD access altogether.
    Refer to SAP Message detail below:
    Please advise how we can login users manually to SSM when accessing
    the "non default" SSM Database when they have Single Sign-On access.
    We have 3 Users that generally will access the system using Single Sign-On, but will occasionally have to enter information using a generic
    User ("Initiator").
    We have a path that we can use for manual login to the default
    Database, however this appears to only work for the Default Database:
    http://ssmdev:50000/strategy/login/start.jsp
    This will only work for the Default Database (set as pw database in
    Java System Properties).
    The following path to the non-default Database (EPM Database) results
    in automatic login for the user:
    http://ssmdev:50000/strategy/pilotworks/start.jsp?PilotWorksDB=EPM
    Is there a path we can use to provide the manual login page for
    the "Non Default Database"       
    Steps for Reconstruction    
    As above, login by the Users does not allow manual login to the Non
    Default Database, EPM.

    Hi Scott,
    Sorry, I missunderstood your initial question and the documentation I referenced is not updated appropriately. You have to change the connection string to <server-name>.database.secure.windows.net when you enable the security/auditing features.
    Documentation for this can be found
    here
    Thanks,
    Jan

  • IdM doesn't support non-default port on mysql 4.1 as repository??

    Hi
    IdM doesn't support non-default port on mysql 4.1 as repository??
    IdM version is 6.0.
    I setup mysql 4.1 using non-default port 3307.
    (default port is 3306)
    During setup wizard,
    the URL [jdbc:mysql://localhost:3307/waveset] doesn't work.
    I am getting following error.
    com.waveset.util.InternalError:
         ==> com.waveset.util.ConfigurationError:
         ==> com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
    Of cource,
    the URL [jdbc:mysql://localhost/waveset] works well
    when I setup mysql using default port.

    Hi,
    it does work with non standard ports but whatever port you specify it will always try to connect to the default port before actually changing the repo setting.
    Therefore use the switches -n -o $WSHOME/WEB-INF/ServerRepository.xml to write the new configuration without performing the broken checks.
    Regards,
    Patrick

  • Non-default system-application.xml file?

    There's mention in the OC4J documentation regarding specifying a non-default system-application.xml file; however, I cannot find the string defining it in any of the OC4J files, nor in the documentation though I might have missed it in that.
    I am attempting to have multiple instances run out of the same ORACLE_HOME, and I'd like to point the logs to separate places per instance. Every other one is pretty clear (defined in the customized server.xml), this one with its logging parameter I cannot find a method for keeping a separate log file per instance other than simply creating multiple oracle or at least j2ee homes. Short cut for keeping things consistent for many settings and deployments, though may not be feasible for a running environment.
    Any information or points in the right direction would be appreciated. Thanks,
    Geoff

    You can modify the <log> tag in system-application.xml to rotate the system log file.
    System application is a key internal component that is critical to OC4J startup, the system-application.xml file should not be modified except for the <jazn> and <log> tags.
    You can modify the <jazn> tag as needed to specify changes to the security provider, the location of the OC4J security configuration file (system-jazn-data.xml), or both. For more information about <jazn> and the system-jazn-data.xml file, see the Oracle Containers for J2EE Security Guide.
    There's no reference of system-application.xml in other config files.
    -Frances

  • Apple tv 2 - root password has been changed to non default.   I need to access apple tv 2.   how do i get access with a forgotten password

    apple tv 2 - root password has been changed to non default.   I need to access apple tv 2.   how do i get access with a forgotten password

    Welcome to the Apple Community.
    It depends on which password you are referring to, but generally speaking you can always restore the Apple TV.

  • How to find Parameter values of a non-default listener using LSNRCTL

    Hi,
    I have a non-default listener with name like "lsnr_abcd" in non-default port.
    I am on 10.2.0.4 database version. If I want to find out parameter values (like displaymode,dynamic_registration,etc)
    for a non-default listener, which command should I use?
    I know that for default listener, we can do the following
    1) Execute lsnctl
    2) show dynamic_registration
    What should I execute if I want to get this details for a listener "lsnr_abcd"
    Thank You
    Sarayu

    After setting your current listener to non default listener like this
    lsnrctl> SET CURRENT_LISTENER lsnr_abcd
    You can execute the further commands without your listener name
    lsnrctl>set DISPLAYMODE
    Edited by: vreddy on Jul 19, 2012 6:53 AM
    Edited by: vreddy on Jul 19, 2012 6:54 AM

  • Link to non-default Tabbed Panel

    I'm looking to set up a link from one page of a site to
    another. The destination page has a TabbedPanels widget. I would
    like to be able to have the link bring the user to a non-default
    TabPanel. I have found some information about doing this from the
    within same page, but not from another page in the site (or any
    external url).
    The page is currently here:
    http://staging.smudgedgraphics.com/whitelamb/rates.html
    I would like to link to:
    http://staging.smudgedgraphics.com/whitelamb/specials.html
    [to the Cottages Tab]
    Any help would be appreciated.
    Thanks!

    I've read through that page several times, and the
    information is great, but for a more digested version of what you
    want to achieve, you can also check out
    Opening
    Specific Tabs and Accordion Panels from Another Page
    Nicely laid out on how to use the SpryURLUtils.js file to
    achieve exactly what you are looking for.

  • Configuring IPIB with non-default partition key

    Hello
    I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
    But this IB-VPPA was displayed as unconfigured on Solaris host
    ib::3BA0001004181,ffff,ipib    IB-VPPA      connected    configured   ok
    ib::3BA0001004182,fffe,ipib    IB-VPPA      connected    unconfigured unknown
    ib::3BA0001004182,ffff,ipib    IB-VPPA      connected    configured   okConfiguration of new VPPA with cfgadm was unsuccessful:
    # cfgadm -c configure ib::3BA0001004182,fffe,ipib
    Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
    This operation will suspend activity on the IB device
    Continue (yes/no)? yes
    cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
    I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)
    Is it possible to configure VPPA with non-default pkey on Solaris ?
    Is it possible to configure more than 1 IPIB VPPA on single HCA port ?
    How to perform these configurations ?
    Thanks in advance.
    Regards,
    Denis

    hi
    I was able to setup the listener to serve both databases using netmgr, thanks. Apparently I was trying to use the wrong tool for this previously.
    Now i'm able to access the EM Database Control and it seems to be working fine though i get the following error message
    Logged in As SYS
    Error
    java.lang.Exception: Number of responses does not match queries
    Database Instance: devel.foo.bar
    Now, i'd like to be able to use EM for administering two separate databases (running on the same host). Do i need to migrate the database control somehow to grid control? How do i do that?
    What about security? I'd like to use SSL and limit connections to selected clients only.
    regards,
    aspa

Maybe you are looking for