Printed material does not align as I want

I'm not sure whether this is printer problem or if I've not set something up correctly-
I typed a letter on WordPad with a left alignment. But when I printed it, sentences
were broken up with 2 or 3 words of the sentence finishing
on the
next line. It was like that
the whole
way through. 
     Sort of like 
this and
then the sentence might finish here.
Hope someone understands what I mean.
Thank you for any help!

hello,
what printer is this???
and what operating system???
how is the printer connected to your computer???

Similar Messages

  • Week No. on new P45 forms does not align and prints outside the ...

    The new P45 sapscript (HR_GB_P45_A4_D & HR_GB_P45_A4) does not align the Week number within the box of the pre-printed HMRC stationery. The week number appears on all three forms (1/1A, 2 and 3), being page 1,2 and 3 of the sapscript, and all are printed out of their appropriate box.
    Has anyone else encountered this problem ?.
    I can correct this as we currently use a Z version of the sapscript. I have checked the Z version (a recent copy) of the SAP original sapscript to ensure that the original will also have a mis-alignment, which it does. However, despite changing this I would still like SAP to correct their mistakes. I must admit I am VERY surprised that nobody else has encountered this problem as any week number being displayed on either the HR_GB_P45_A4 or HR_GB_P45_A4_D form will not align correctly.
    Jason
    Edited by: Jason Stratham on May 26, 2009 2:55 PM
    Edited by: Jason Stratham on May 26, 2009 4:28 PM

    P45 form printing to tray 1,2, and 3.
    On a slightly related subject we occassionally find that our lexmark three bin printer seems to forget it's bin setup and every now and then the pages will come out on the wrong HMRC pre-printer stationey. We have double-checked the paper loaded and we ONLY have the P45 form 1/1A in try 1, form 2 in tray 2 and form 3 in tray 3. However, despite this it still occassionally goes wrong, with the form 1 and 2 printing to tray 2 and form 3 printing to tray 3. This normally happens after a long weekend, so I don't know whether this is a printer driver caching problem or suchlike. Has anyone had any similar problems?.
    Jason

  • Text ID  for text object MATERIAL does not exist - MM01

    Hi All,
    I am getting below error message when trying to save Material Master in MM01.
    Text ID  for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    I have searched the forums but couldn't get relevant message.
    Please assist.
    Thanks,
    Raj

    Hi Jurgen,
    This is the complete message i am getting.
    Text ID for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    If I enter MM02 and without changing anything if i save still i get this error message.
    Thanks & Regards,
    Raj

  • I have PIXMA MG5320 and I am running Win 8. Software cd does not install. I want to scan, but havin

    I have PIXMA MG5320  and I am running Win 8. Software cd does not install. I want to scan, but having trouble.
    I insert USB stick into USB port on the printer.
    I select SCAn and then select USB.  I select  " <i>" key. I do not find any data on the USB stick.
    What gives?
    I cannot install the software  on Windows 8

    Hi jvandal,
    The CD that came with the PIXMA MG5320 does not include Windows 8 drivers and softare, so you would have to download the drivers and software from our website.  Use the following steps to download the drivers and software:
    Go to Canon's Support & Drivers website at:
    http://www.usa.canon.com/cusa/support/consumer
    Enter your model name into the Model Name field, then click GO.
    Select your operating system in the Select Operating System and Select OS Version dropdown lists, respectively.
    Expand the Drivers section by clicking the red triangle.
    Click on the file named MG5300 Mini Master Setup.
    After reading the details and disclaimer, click 'I Agree Begin Download' and save the file to your computer.
    Once the download is complete, double-click the file from its download location to begin the installation.
    Once complete, click the I Decline Go Back to return to the download page.
    Expand the Software section by clicking the red triangle.
    Click on the file named MP Navigator EX Ver 5.0.0.
    After reading the details and disclaimer, click 'I Agree Begin Download' and save the file to your computer.
    Once the download is complete, double-click the file from its download location to begin the installation.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Print queue does not work

    Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
    I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
    P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

    1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
    2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
    3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
    4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
    5) Also the verification of the temporary files find no problems.
    In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

  • MM305: Material does not exist

    Hello Experts,
    Although this BW related but i thought this might be the appropriate forum:
    I am trying to load data in BW for Purchasing. However, the data loads are failing with the following error message:
    You wanted to display or process data on the material 100046399 .
    However, the material does not yet exist; that is, it has not yet been
    created, or its creation has been scheduled, but the material has not
    yet been activated.
    I investigated further a found out a Stock transport order in the R/3 system which had a line item for the material 100046399 but the material doesn't actually exists in the MARA (Material master table).
    Furthermore, this stock transport order was put on hold but even a hold creates an entry in the Purchasing tables which is why the data gets extracted to BW
    So, the question is how can a PO be created with a non-existent material?
    Has anyone seen a similar situation? what could be a possible fix for this?
    Thanks and Regards,
    Rishi

    I curerntly have a similar case with a PO  having a material that did not exist.
    in my system this was caused by incorrect migration process from R2 to R3  11 years back.
    The POs were transferred 1:1, but material were only transferred if it did not have a deletion indicator.
    (this migration was done by SAP, I dont know what programs they used for this)
    I have the situation that I cannot archive the PO because of open GR/IR postings. but I cannot clear GR/IR account with MR11 because I get message that material does not exist.

  • What to do if your printer manufacturer does not have SL drivers.

    If your printer manufacturer does not have drivers for your printer under SL, there are several possible solutions, only the first of which is well-known.
    1. Apple has probably included a Gutenprint driver for your printer, which will install without any problems.
    2. hpijs is a collection of open-source drivers made by HP but applicable to many other makes of printer. Google for it and follow the instructions.
    The problem with these two solutions is that the drivers may not give full access to your printer. For instance, the Gutenprint driver does not allow duplex printing on my machine.
    3. An unofficial unsupported solution has been given in the HP FAQ thread and will probably work for other makes to restore full functionality.
    Roughly speaking, download and use the drivers from your Leopard install disk and run the program you want to print from in 32-bit mode. For full details of how to install the drivers look at the post in the HP FAQ thread

    As I said, the HP FAQ thread. A long one, five pages or so, with a suggestion made around page 3. I didn't give full details myself because that felt like stealing from the guy who gave it.
    It's the program you want to print from that needs to be in 32-bit mode, which is done from the Get Info window.
    The problem with drivers that used to work is that they are 32-bit and won't work directly on a 64-bit program.
    If you have the old drivers installed (they may need reinstallation and re-recognition of the printer) I think the solution is to open a printer dialog from the program you are using and do not print but save as PDF. Set Preview or Acrobat Reader to run in 32-bit mode permanently and print the PDF from there.
    I haven't had time to try this fully, but it does give the full printer dialog box rather than the restricted Gutenprint one.

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

    Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

    That's very strange.  See if clearing the cache in Safari will make it work.  I'll include the steps below.  If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't.  If it will, then something is wrong with Safari.  If it doesn't print, then the web pages might have printing blocked.  There are sites that are doing that for copyright reasons.  Let me know what you find.
    To clear the cache on Safari:
    Open Settings.
    Select Safari
    Touch Clear Cache.
    Select Clear.
    Touch Clear Cookies.
    Select Clear.
    Touch Clear History.
    Select Clear.
    I am a printer tech for HP.

  • The material does not exist in plant or flagged for deletion

    Hi All,
    I have done the integration of R3 back end with SRM system (SRM 5.0) Classic scenario is working fine.
    In the direct Material Procurement I get an error message that "the material does not exist in plant or flagged for deletion".
    I checked R/3 side material is active only and I have assigned plant in extend attributes.
    Can you please help me to resolve this problem..
    Thanks
    Ravi

    Hi Ravi
    check you validit date from and to for that material in comm_product table.* if it is valid you can do shopping or else you cant.
    regards
    Muthu

  • Ipad 2 Print button does not work after 6 upgrade?

    Since we upgraded to iOS6, our print button does not work and does not find our printer.  It was working fine until iOS6.  Called an Apple Technician and he had me reset, which wiped out all of my saved information but didn't fix the print.  He then started talking about a restore but the phone line went dead.  Has anyone had this problem?

    Today's iOS 6.1 update fixed the printer problem.

  • Reset Printing System does not exist on my computer!!!

    I have been trying to get my HP PSC 2175 to print and working with HP support to do this. It just prints out blank pages. The last thing they sent me was to Reset the printing system using the Printer Setup Utility. And they sent me to the below link:
    http://docs.info.apple.com/article.html?artnum=301185
    For whatever reason, the "Reset Printing System" DOES NOT EXIST on my computer. I actually sent screen captures to show them. The first showed my
    version of the Printer Setup Utility (3.0) and the second showed the
    Printer Setup Utility menu - with no such option. I am running OS 10.4.4 and have all of the updates. I even opened the Printer Setup Utility holding down the "option" key.
    Does anyone know how to reclaim this feature???
    thanks
    eric

    After all of the emails back and forth with HP, I have really only done two things: A complete manual uninstall - which is a royal pain in the butt. That is worse than any uninstall with windows, and way worse than Class MacOS. Then they kept trying to get me to Reset the Printing system - which is what I can't do.
    I upgraded to Tiger via a DVD - straight from the box. I had 10.3.x, bought Tiger and upgraded. I have since updated it via the website. I think what I just installed was the combo updater - but I don't think it really did anything as I had already done that.
    If there is a better way to go, please let me know. I searched all over Apple's site for just that piece of the printing system, but unlike the old OS, there doesn't seem to be a way to download those components.

  • Epson r800 prints, but does not appear in Printer List: can't use Utilities

    My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
    iMac   Mac OS X (10.4.9)  

    For your Epson try this:
    Hard Drive, Library, Printers (folder), Epson folder,
    Inkjetprinter folder, Utilities folder and here you
    will find Epson Printer Utility2. Click on it and it
    should work.
    Note. Epson utilities will not work unless the
    Printer is directly connected to the computer.
    Had the same issue with my 2200 photo and the above
    worked.
    Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

  • RH7 - Custom WebHelp Pro skin custom "Print" button does NOT display in version published to RH Server 8

    I customized a WebHelp Pro skin using the Omega skin as the basis. Everything works fine except the Print button, which I added using the same Action as shown in the BeautifulVista skin's Print button.
    Local Version (C: drive)
    When I generate my help project and view it locally from my C: drive after I accept the warning about viewing locally, I see the Print button.
    However, it does NOT work.  I've attached a graphic that shows the local version and the skin dialog where I set up the action for the Print button.
    RH Server 8 version
    When I view the same project after I publish it to the server, the Print button does NOT display.
    QUESTIONS ARE:
    How do I get the Print button to function properly (active printer dialog)?
    If it can't work until it is published that fine but then how do I get it display when I view from server?

    Hi there
    Have you tried editing your Window Definition?
    Click View > Pods > Project Setup
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • How do I print from a printer that does not support airprint?

    I have an ipad and would like to print photographs and e-mails from it via my Lexmark Pro901 wireless printer which does not seem to support Airprint,   Can anyone help please?

    Lexmark has an app I believe.
    Or you can look into third party apps. I use Print n Share, but i also see print central and printopia recommended

Maybe you are looking for