Printer is using different colour than original

Although I have plenty of black ink bit low on colours my prints are coming out in red now in yellow instead of black and red
This question was solved.
View Solution.

Hi @Deborahdebster
Welcome to the HP Support Forums. I understand that when printing using your Deskjet 3520 printer, you are experiencing a print quality issue in regards to the colors.
I have included the Fixing Print Quality Problems for the HP Deskjet 3520 and HP Deskjet Ink Advantage 3520 e-All-in-One... document. It has the steps you are looking for to correct the print quality issue.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Bullet Using Different Font than Body Text

I would like to have a bullet that uses a different font than the body text. Say, for text I use Verdana, and for the bullet I would like to use a glyph from Zapf Dingbats. I seem to not be able to figure out how to set this up -- the bullet always uses the same font as the text.
Thanks for your help.
-- Stefan

If you Option-Click on the bullet character, you can select it on its own, separate from the body text. You can then apply whatever font you want, and in the Text Inspector, in the Bullets palette, you can type whatever character you want in the Text Bullets field. (If you want this character for all of your bullets, it would be easiest to do this editing on the slide masters, rather than the individual slides.)

Can I use different colours for the different user accounts in my iCal?

I have my own iCal and one for my boss. I need our appointments to show up in different colours so that I can tell at a glance which are mine and which are his. Currently our appointments show up on the same calendar, on top of each other, and both are coloured red.
Can I change the colour of one of us?

Thanks. If there are other people invited to the appointment it comes up with this
So I don't want to 'move' it or cancel the original appointment. is there another way I can, for example, have my boss's appointments all come up green and mine all come up blue......

Why does my printer print different colours than are displayed on the screen, in Photoshop Elements 10

My printer has begun to print greens as browns. This only occurs with photographs.
Is there a solution to this.
I have checked and I have the latest drivers and the test sheet colours are fine.

I found another thread finally about this issue which effects many. There is a 3rd party that makes drivers that I installed and cut my "sending to printer" time from 10 minutes per page to instantly!
Google: gutenprint or go direct to the Apple page at:
http://gimp-print.sourceforge.net/MacOSX.php
and download Gutenprint 5.2.8-pre1 and install the drivers (there's an uninstall in case you need to)
Then go to: System Prefs > Print & Fax > Options & Supplies... > Driver > Print Using:
Select the driver that looks most like yours. In my case I have a "HP Lasterjet 1200" and Gutenprint's driver substitute is: "HP LaserJet 1200 - CUPS+Gutenprint v5.2.8-pre1"
After selecting your substitue driver, click OK and click out of the Sytstem Prefs and try printing.
I was stunned at the difference in time. It was immediate as opposed to 10+ minutues per page.
The one thing though.. is when I was using the HP Driver and it took so long, the printer icon was in my dock the whole time and if I clicked it and launched the interface, there was an "Advanced" button and clicking that gave me a bunch of configurations that I'd never seen before being that I never got this into printing before. But from memory there was which language to choose: Language 2 or 3 and then, stuff like cleaning up background and others I can't remember now.
But now that the new driver prints instantly the printer icon is in the doc all of 1 second and so I can't launch it to get to options. I remember experiementing but unfortunately can't tell you all what I tried since I can't picture what all the config options were/are.
So.. I'm not 100% sure if the speed I'm enjoying now is partly because of the Advanced configuration changes I was trying. Sorry...
If someone knows how to get to these Advanced options, please post them in this thread?
Thanks,
S

Exchanging ink - New printer uses different ink than old one

I just posted my issue and do not see it anywhere. Here it is again.
I was told by the gentleman at HP that I could exchange my ink that I can no longer use because I just upgraded to a different HP printer. My ink is new and very costly. How does this work?

Hi bodhi1. You should contact support for any details that may exist on exchanging ink.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Printer is printing different colours than what it should do

Can anyone help!.
Go my black cartridges refilled today and put it back in my printer. When i print a mono picture picture, it fades have way through then goes a deep red. But the colours are also getting mixed up. This only started when the black cartridge ran out, does anyone know what i can do.

Scouse01 wrote:
Can anyone help!.
Go my black cartridges refilled today and put it back in my printer. When i print a mono picture picture, it fades have way through then goes a deep red. But the colours are also getting mixed up. This only started when the black cartridge ran out, does anyone know what i can do.
See here for suggestions. Without any clues about your printer model, the application you are printing from or your operating systemI would say the issue is that you are running out of cyan ink.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why does using AIFF Encoder use more space than original CD?

I import with the AIFF Encoder option, as I want the best possible sound quality. A Full CD uses 700 MB, yet when I import a full CD into itunes, it says that is is using more than 800 MB. How is this possible?

Using the AIFF/Apple Lossless encoder is different to using CDA or MP3 format.
This is like a comparison between digital and analogue.
Digital is about space efficiency - so, look at a CD - It's small right?
This is because they have only taken sounds within a narrower band-width than the band-width used on a record (vinyl) and they have also encoded it (it's like shortening 'male' to 'm' under sex)
Vinyl has a huge band-width (just compare a full-sized record to a CD) and takes every little detail of a song, every rich sound and keeps it as a value on its' surface.
This is the same as the AIFF of Apple Lossless format - they take every little sound and put it inside the file - which makes it high quality but huge!
I have compared sizes and AIFF of the same file is 10 times the size of the AAC.
The digital formats use maths equations rather than on/off values for sounds.
I would not use this format (AIFF or Apple Lossless) unless you were transferring from vinyl to your iPod and you didn't want much else because it is full of on/off values.
CD's have reduced quality of sound and downloads are limited to the speed of the servers for quality BUT if you still want good quality and small size, encode in AAC - It is better than an MP3 because AAC is 4 layers of maths instead of 3 layers in an MP3.
Remember though, there is no point in making a high quality file from a lower quality source - you are just filling your iPod with no noise!

JDeveloper, ADF, Quartz: Quartz Using different Classpath than Backing bean

Hi,
I have an ADF 10g application. When i get an Application module using Configuration.createRootApplicationModule, it works fine in normal java class or backing bean.
Now i have an quartz configured in this project. The same code does not work in Quartz Job class.
When i print the classpath using System.getProperty("java.class.path") in normal java class or backing bean, then it considers everything along with BC4J jar files. But when i print the same thing in quartz job, it has only two jar files inside its class path: C:\JDeveloper\j2ee\home\oc4j.jar;C:\JDeveloper\jdev\lib\jdev-oc4j-embedded.jar.
Can anyone let me know what could be the issue if someone has configured Quartz with JDeveloper and ADF application.
--Chintan

Hi!
Have you solved this problem? If yes, can you share the solution.
Regrads,
Sašo

How to download app updates from different account than original app purcha

I have a collection of apps on my iPhone that I bought through my original iTunes account, then later I signed up for a second account (because I was confused and I didn't know what I was doing) so my more recent apps were bought through that second account. I really would like to close the older account because I have no use for two separate accounts.
But here's the problem: when I update an app, iTunes remembers what account I originally bought it under and asks me to sign in to that account. So if I close the older account I will no longer be able to update any apps that I purchased under that account. Is there a way I can fix it so that I can close the old account but still be able to update those other apps?

there a way I can fix it so that I can close the old account but still be able to update those other apps?
No.
You will need to use both accounts to update your apps unless you repurchase them on the new account.

Restore file to a different folder than original?

Hi I work with a lot of password protected word documents (can't be viewed in quick look)... and often want to look at the changes that are made with previous versions. Is there a way to be able to restore time machine backups to a different folder so it doesnt overwrite the current version

Yes, you can!
While in the TM interface, just choose the file(s) that you want to restore to a different location, click on the Gear Icon and choose "Copy ...". Then come out of the TM browser by clicking Cancel or pressing Esc key and browse over to the destination folder in the Finer. Right click and choose "Paste ...". This will restore the file from your chosen backup to this folder.

"Check Video Cable" Message on HP 2311x (different issue than original post by jca93)

Hello,
Monitor Status displays:
MONITOR STATUS
DVI: No Signal
HDMI: No Signal
VGA: Active
Auto-Switch Source: Off
Default Source: VGA
Recommended Settings: 1920 x 1080 - 60 Hz
I only have VGA cables, so I do not use DVI or HDMI to connect monitor to computer. I was configuring the On-Screen Display (OSD) when I accidently went into Source Control Options and changed the video source from VGA to HDMI (or DVI, whichever one is placed directly above VGA).
By default, auto-switch should be on, but I turned it off a month prior. Computer is not affected, only monitor. I have tried to access the Source Control Options, but the OSD does not pop up.
My question is: is it possible to fix this issue, error without purchasing the other 2 types of cables? Is it possible to open up the OSD?
Help from an HP Expert or the community will be much appreciated. If you need me to provide more information, I will be happy to comply.
This question was solved.
View Solution.

Please try performing a hard reset on your 2311x monitor;
1. Disconnect the power cord from the monitor.
2. Hold down the power button for 30 seconds.
3. Plug the power cord back into pc.
This should clear your current video source issue and your OSD issue by returning the settings to factory.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

New version of iTunes has bug i.e. downloaded mp3 has very different title than original

When I import the downloaded mp3 the title is very different and offensive words. What is up with this? thnx

mfromevergreen wrote:
How do I reply? thnx
You just did reply.
Type words and click Reply.

How do you prevent HP Deskjet IA 4615 printer from using colour to print black!!!!????

I just recently bought this great All-in-One HP DeskJet IA 4615 as I've needed all the other functions besides printing for a while now. Imagine my horror when trying to specifically save on using colour when printing a newsletter to about 900 clients by putting elements of colour into a predominately black design...and then wondering why all the colours are going down so fast...then discovering that the printer is USING THE COLOURS TO PRINT BLACK!!!!
I have looked all over for switching this off...but haven't been able to find the answer?
Is this standard?
In that case I'm EXTREMELY disappointed to find that HP uses this tactic to get you to use ALL the colour cartridges!!!
Please, if anyone has the answer for me...let me know!!!!
This is NOT a great way to find out you can't save ink no matter what you do! I hope one can...redeem my love for HP, PLEASE!

Hey MarleMac,
What is the Operating System of the computer you are using the Deskjet Ink Advantage 4615 with?
If you are using a Windows PC, then open the Devices and Printers folder. Right click on the printer and select Printing Preferences. If you want to print a black and white document using black ink only, click the Advanced button. From the Print in Grayscale drop-down menu select Black Ink Only, then click the OK button.
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Why are my identically coloured opaque images printing different colours? Is it a transparency issue

I have an object that is a plain white logo with a grey background - the file is a flattened psd file and has only the one layer.
when i place the logo into InDesign (CS5) onto a plain grey (the same colour as in the logo) background and print this simple combination, the grey background on the logo is a funny colour compared to that on the document background. they have the exact same RGB reference! they only appear different colours when printed; on screen they look great.
i thought that this was an issue with transparency and have tried playing around with having a transparent logo with no background and various transparancy flattener settings but nothings fixing the problem. the only thing that i managed to achieve was to make all of the grey one colour, but the funny coloured grey i was seeing just in the logo background!
when i go to window-output and check the flattener preview, i can see that i have no transparent objects whatsoever in my document.
any help on this matter would be greatly appreciated - its driving me MAD!
thanks,
becky

More to the point on this, I think, is that both RGB and CMYK values listed for any spot color are "best approximations" (many, perhaps most, spot colors have no good CMYK equivalent, and that would be true as well for some subset using RGB) using Pantone's unknown color space. Even in that space the probability of getting an actual match between the simulation and the true spot ink is close to zero. Using some other space makes things worse, and since there is no way to know the sapce in use at Pantone, you're kind of up the creek.
For CMYK converison you can do reasonably well by using the Ink manager to convert the spot to process and check the bok to Use Lab Values at the same time. For RGB, I have no idea how to come close, at all.

How do I use OracleMaps Javascript API from a different host than MapViewer

Hello,
I have successfully set up the Mapviewer quick start 10131, and am able to view the sample page showMap.html perfectly. I would like to run this same sample on a different server than where Mapviewer is installed. Let say mapviewer is installed on jstraub-winsvr:8888 and I want to run showMap.html from jstraub-linux1:7777. I tried changing the function showMap and the location to oraclemaps like the following:
<script language="Javascript" src="http://jstraub-winsvr:8888/mapviewer/fsmc/jslib/oraclemaps.js"></script>
function showMap()
var baseURL = "http://jstraub-winsvr:8888/mapviewer";
var mapCenterLon = -122.45;
var mapCenterLat = 37.6706;
var mapZoom = 4;
var mpoint = MVSdoGeometry.createPoint(mapCenterLon,mapCenterLat,8307);
var mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addBaseMapLayer(new MVBaseMap("mvdemo.demo_map"));
mapview.setCenter(mpoint);
mapview.setZoomLevel(mapZoom);
mapview.display();
Now when I try running this page on jstraub-linux1:7777 I get a Javascript error, and in Firebug, I can see that there are request like the following:
POST: http://jstraub-linux1:7777/mapviewer/ReturnLocaleOper
GET: http://jstraub-linux1:7777/mapviewer/mcserver?xml_request=%3C?xml+version=%221.0%22+standalone=%22yes%22?%3E%3Cmap_cache_admin_request%3E%3Cget_client_config+map_cache_names=%22mvdemo.demo_map%22+format=%22JSON%22/%3E%3C/map_cache_admin_request%3E
Obviously those requests are bogus since mapviewer is at jstraub-winsvr:8888 and not jstraub-linux1:7777, I just want to run the page from jstraub-linux1:7777. Anybody know how I do this?
Regards,
Jason

I believe that I am having the same problem. While I don't yet have a resolution, I do have a bit more information that may be useful. I have examined the oraclemaps.js script file and found some relevant references to the Javascript document.location object. As I watch the script execute, it seems that the author has made the assumption that the page served to the user has been served from the same Oracle Application Server running MapViewer. I have listed the lines that contain references to document.location below. (The line numbers may be off by a line or two as I have made some minor changes to facilitate my investigation.)
Line 742 : //_f16._f104="http://"\+document.location.host\+"/mapviewer/foi";
Line 6280 : var x2=String(document.location);
Line 10270 : var x40=String(document.location);
By changing line 742 to...
f16.f104="http://mymvserver:8888/mapviewer/foi";
...I believe I have the script looking in the right place. (Previously, it had been looking for /mapviewer/foi on the server that originally served the page.)
The x2 variable (at line 6280) seems to provide the current document location as a means to determine the MapViewer URL. Once again, the author seems to presume that MapViewer is found on the same server that originally served the page.
this._f53=x2.substring(0,x3\+x5\+2)+"/mapviewer";
I changed this line to read:
this._f53="http://mymvserver:8888/mapviewer";
Having made these changes, I have moved past the "object not found"-types of errors I had been getting. I now get "Permission Denied" errors which, I am thinking, may be the result of cross-site scripting problems predicted by the previous poster.
So, my question is this: Is it really expected that the page that integrates the map display must be served by the same Oracle Application Server instance on which MapViewer is running? This strikes me as an absurd limitation, so I assume it is not the case. Indeed, there is a post on this forum by another user who claims to have written an ASP.Net application that uses the Javascript interface to integrate MapViewer and the map display ( Link:securing mapviewer ). This is precisely what we are trying to do; but I have yet to determine how to go about doing it.
Can this be done? Is there any documentation that describes how to accomplish this?

Printer is using different colour than original

Similar Messages

Maybe you are looking for