Printer Paused - "/usr/lib/cups/backend/hp failed" [SOLVED]
Nothing that I try to print with CUPS goes to the printer, it just sits in the job list saying "Pending".
CUPS says the status of my printer is:
Paused - "/usr/lib/cups/backend/hp failed"
Restarting CUPS or DBus does nothing.
I didn't notice any updates relating to CUPS so am not sure what exactly happened. I sync and update many times a day, so at least I know a timeframe. The last time I printed something was at:
Sat 21 Nov 2009 03:05:18 PM PST
Now nothing works. I really need to get this working, so any help would be greatly appreciated.
EDIT2:
Near as I can tell it is not indeed a package update problem, sorry. I suppose this is in the wrong forum now.
Here is my /var/log/cups/error-log
E [22/Nov/2009:00:02:01 -0800] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
E [23/Nov/2009:14:53:53 -0800] Unable to remove temporary file "/var/spool/cups/tmp/.fontconfig" - Is a directory
E [23/Nov/2009:14:53:54 -0800] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
E [23/Nov/2009:14:53:54 -0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
D [23/Nov/2009:15:05:20 -0800] [Job 28] The following messages were recorded from 15:05:09 to 15:05:20
D [23/Nov/2009:15:05:20 -0800] [Job 28] Started filter pdftops (PID 3429)
D [23/Nov/2009:15:05:20 -0800] [Job 28] Started filter pstops (PID 3430)
D [23/Nov/2009:15:05:20 -0800] [Job 28] Page = 612x792; 18,14 to 594,778
D [23/Nov/2009:15:05:20 -0800] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0
D [23/Nov/2009:15:05:20 -0800] [Job 28] Before copy_comments - %!PS-Adobe-3.0
D [23/Nov/2009:15:05:20 -0800] [Job 28] %!PS-Adobe-3.0
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%Creator: TeX
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%LanguageLevel: 3
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%DocumentSuppliedResources: (atend)
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%DocumentMedia: plain 596 842 0 () ()
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%BoundingBox: 0 0 596 842
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%Pages: 2
D [23/Nov/2009:15:05:20 -0800] [Job 28] %%EndComments
D [23/Nov/2009:15:05:20 -0800] [Job 28] Before copy_prolog - %%BeginDefaults
D [23/Nov/2009:15:05:20 -0800] [Job 28] Before copy_setup - %%BeginSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] Before page loop - %%Page: 1 1
D [23/Nov/2009:15:05:20 -0800] [Job 28] Copying page 1...
D [23/Nov/2009:15:05:20 -0800] [Job 28] pagew = 576.0, pagel = 763.2
D [23/Nov/2009:15:05:20 -0800] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [23/Nov/2009:15:05:20 -0800] [Job 28] PageLeft = 18.0, PageRight = 594.0
D [23/Nov/2009:15:05:20 -0800] [Job 28] PageTop = 777.6, PageBottom = 14.4
D [23/Nov/2009:15:05:20 -0800] [Job 28] PageWidth = 612.0, PageLength = 792.0
D [23/Nov/2009:15:05:20 -0800] [Job 28] Copying page 2...
D [23/Nov/2009:15:05:20 -0800] [Job 28] pagew = 576.0, pagel = 763.2
D [23/Nov/2009:15:05:20 -0800] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [23/Nov/2009:15:05:20 -0800] [Job 28] PageLeft = 18.0, PageRight = 594.0
D [23/Nov/2009:15:05:20 -0800] [Job 28] PageTop = 777.6, PageBottom = 14.4
D [23/Nov/2009:15:05:20 -0800] [Job 28] PageWidth = 612.0, PageLength = 792.0
D [23/Nov/2009:15:05:20 -0800] [Job 28] Wrote 2 pages...
D [23/Nov/2009:15:05:20 -0800] [Job 28] PID 3429 (pdftops) exited with no errors.
D [23/Nov/2009:15:05:20 -0800] [Job 28] PID 3430 (pstops) exited with no errors.
D [23/Nov/2009:15:05:20 -0800] [Job 28] foomatic-rip version $Revision=3.0.2.131$ running...
D [23/Nov/2009:15:05:20 -0800] [Job 28] Parsing PPD file ...
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option ColorSpace
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option Resolution
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option PageSize
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option Model
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option PrintoutMode
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option InputSlot
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option Duplex
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option Quality
D [23/Nov/2009:15:05:20 -0800] [Job 28] *cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip-hplip"
D [23/Nov/2009:15:05:20 -0800] [Job 28] *cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip-hplip"
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option PageRegion
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option ImageableArea
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option PaperDimension
D [23/Nov/2009:15:05:20 -0800] [Job 28] Added option Font
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Parameter Summary
D [23/Nov/2009:15:05:20 -0800] [Job 28] -----------------
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Spooler: cups
D [23/Nov/2009:15:05:20 -0800] [Job 28] Printer: Primary
D [23/Nov/2009:15:05:20 -0800] [Job 28] Shell: /bin/sh
D [23/Nov/2009:15:05:20 -0800] [Job 28] PPD file: /etc/cups/ppd/Primary.ppd
D [23/Nov/2009:15:05:20 -0800] [Job 28] ATTR file:
D [23/Nov/2009:15:05:20 -0800] [Job 28] Printer model: HP LaserJet 1320 hpijs, 3.9.10.72
D [23/Nov/2009:15:05:20 -0800] [Job 28] Job title: soñar_en_cubano.pdf
D [23/Nov/2009:15:05:20 -0800] [Job 28] File(s) to be printed:
D [23/Nov/2009:15:05:20 -0800] [Job 28] <STDIN>
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [23/Nov/2009:15:05:20 -0800] [Job 28] Pondering option 'finishings=3'
D [23/Nov/2009:15:05:20 -0800] [Job 28] Unknown option finishings=3.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Pondering option 'media=na_letter_8.5x11in'
D [23/Nov/2009:15:05:20 -0800] [Job 28] Unknown "media" component: "na_letter_8.5x11in".
D [23/Nov/2009:15:05:20 -0800] [Job 28] Pondering option 'number-up=1'
D [23/Nov/2009:15:05:20 -0800] [Job 28] Unknown option number-up=1.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Pondering option 'sides=two-sided-long-edge'
D [23/Nov/2009:15:05:20 -0800] [Job 28] Pondering option 'job-uuid=urn:uuid:c6d32594-cd36-3c4e-65bf-a70c81a0e285'
D [23/Nov/2009:15:05:20 -0800] [Job 28] Unknown option job-uuid=urn:uuid:c6d32594-cd36-3c4e-65bf-a70c81a0e285.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Pondering option 'job-originating-host-name=localhost'
D [23/Nov/2009:15:05:20 -0800] [Job 28] Unknown option job-originating-host-name=localhost.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] ================================================
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] File: <STDIN>
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] ================================================
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Reading PostScript input ...
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> This document is DSC-conforming!
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %RBINumCopies: 1
D [23/Nov/2009:15:05:20 -0800] [Job 28] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another "%%Begin..." comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] -----------
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginProlog
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%EndProlog
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] -----------
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginFeature: *PageSize Letter
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: PageSize=Letter --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: PageSize=Letter --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginFeature: *PrintoutMode Normal
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: PrintoutMode=Normal --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: PrintoutMode=Normal --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginFeature: *InputSlot Default
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: InputSlot=Default --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: InputSlot=Default --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginFeature: *Quality FromPrintoutMode
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: Quality=FromPrintoutMode --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: Quality=FromPrintoutMode --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginFeature: *Duplex DuplexNoTumble
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: Duplex=DuplexNoTumble --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %% FoomaticRIPOptionSetting: Duplex=DuplexNoTumble
D [23/Nov/2009:15:05:20 -0800] [Job 28] Option: Duplex=DuplexNoTumble --> Setting option
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%EndSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] Inserting PostScript code for CUPS' page accounting
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] -----------
D [23/Nov/2009:15:05:20 -0800] [Job 28] New page: 1 1
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginPageSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] Inserting option code into "PageSetup" section.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%EndPageSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] End of page header
D [23/Nov/2009:15:05:20 -0800] [Job 28] Stopping search for page header options
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: Q
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Output goes directly to the renderer now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Starting renderer
D [23/Nov/2009:15:05:20 -0800] [Job 28] JCL: <job data>
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] renderer PID kid4=3435
D [23/Nov/2009:15:05:20 -0800] [Job 28] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP LaserJet" -dDuplex=true -dTumble=false -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=0,Quality:MediaType=0,Quality:PenSet=0,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- -
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%PageTrailer
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%Page: 2 2
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] -----------
D [23/Nov/2009:15:05:20 -0800] [Job 28] New page: 2 2
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%Page: 2 2
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Output goes to the FIFO buffer now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BeginPageSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] Inserting option code into "PageSetup" section.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%EndPageSetup
D [23/Nov/2009:15:05:20 -0800] [Job 28] End of page header
D [23/Nov/2009:15:05:20 -0800] [Job 28] Stopping search for page header options
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: (hair) 17.1865 Tj
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Output goes directly to the renderer now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Starting process 3436: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%PageTrailer
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%Trailer
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%DocumentSuppliedResources:
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%Pages: 2
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%BoundingBox: 0 0 596 842
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Found: %%EOF
D [23/Nov/2009:15:05:20 -0800] [Job 28] --> Continue DSC parsing now.
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Closing renderer
D [23/Nov/2009:15:05:20 -0800] [Job 28] PAGE: 1 1
D [23/Nov/2009:15:05:20 -0800] [Job 28] STATE: +connecting-to-device
D [23/Nov/2009:15:05:20 -0800] [Job 28] prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/hp_LaserJet_1320_series?serial=00CNDC51W23C
D [23/Nov/2009:15:05:20 -0800] [Job 28] GPL Ghostscript 8.70: Unrecoverable error, exit code 1
D [23/Nov/2009:15:05:20 -0800] [Job 28] Process 3436 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [23/Nov/2009:15:05:20 -0800] [Job 28] renderer return value: 1
D [23/Nov/2009:15:05:20 -0800] [Job 28] renderer received signal: 1
D [23/Nov/2009:15:05:20 -0800] [Job 28] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [23/Nov/2009:15:05:20 -0800] [Job 28] error: No such file or directory (2)
D [23/Nov/2009:15:05:20 -0800] [Job 28] Cleaning up ...
D [23/Nov/2009:15:05:20 -0800] [Job 28] Killing process 3435 (KID4) with signal 15
D [23/Nov/2009:15:05:20 -0800] [Job 28] KID3 exited with status 3
D [23/Nov/2009:15:05:20 -0800] [Job 28] Renderer exit stat: 3
D [23/Nov/2009:15:05:20 -0800] [Job 28] Killing process 3435 (KID4) with signal 9
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Closing foomatic-rip.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Renderer process finished
D [23/Nov/2009:15:05:20 -0800] [Job 28] Process dying with "Error closing renderer", exit stat: 3
D [23/Nov/2009:15:05:20 -0800] [Job 28] error: Bad file descriptor (9)
D [23/Nov/2009:15:05:20 -0800] [Job 28] Cleaning up ...
D [23/Nov/2009:15:05:20 -0800] [Job 28] Killing process 3434 (KID3) with signal 15
D [23/Nov/2009:15:05:20 -0800] [Job 28] Killing process 3434 (KID3) with signal 9
D [23/Nov/2009:15:05:20 -0800] [Job 28] Error closing renderer
D [23/Nov/2009:15:05:20 -0800] [Job 28]
D [23/Nov/2009:15:05:20 -0800] [Job 28] Closing foomatic-rip.
D [23/Nov/2009:15:05:20 -0800] [Job 28] Backend returned status 1 (failed)
D [23/Nov/2009:15:05:20 -0800] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details.
D [23/Nov/2009:15:05:20 -0800] [Job 28] End of messages
D [23/Nov/2009:15:05:20 -0800] [Job 28] printer-state=5(stopped)
D [23/Nov/2009:15:05:20 -0800] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed"
D [23/Nov/2009:15:05:20 -0800] [Job 28] printer-state-reasons=paused
E [23/Nov/2009:15:21:07 -0800] Unable to remove temporary file "/var/spool/cups/tmp/.fontconfig" - Is a directory
E [23/Nov/2009:15:21:07 -0800] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
E [23/Nov/2009:15:21:07 -0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [23/Nov/2009:15:21:29 -0800] Returning IPP client-error-not-possible for Cancel-Job (ipp://localhost/jobs/30) from localhost
EDIT2:
Anyone else who gets this problem and freaks out: All you have to do is go to the CUPS printer administration page and click "Resume Printer".
Last edited by egan (2009-11-23 23:56:37)
I am having this same issue but simply resuming the printer won't change anything....
I always see this message when I try printing ....
"/usr/lib/cups/backend/hp failed"
but if I just call it from the command line, it shows me my printer info...
[somekool@rockinTV test]$ /usr/lib/cups/backend/hp
direct hp:/usb/deskjet_5550?serial=MY27G1J3CK2L "HP deskjet 5550" "HP deskjet 5550 USB MY27G1J3CK2L HPLIP" "MFG:hp;MDL:deskjet 5550;CLS:PRINTER;DES:deskjet 5550;SN:MY27G1J3CK2L;"
[somekool@rockinTV test]$
by looking further... I found two more error message...
"io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted"
and
prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
full log below
please help !!!
==> cups/access_log <==
localhost - - [10/Jan/2010:11:04:02 -0500] "POST /printers/deskjet_5550 HTTP/1.1" 401 128 Pause-Printer successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:02 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3765)
==> cups/access_log <==
localhost - - [10/Jan/2010:11:04:02 -0500] "POST /printers/deskjet_5550 HTTP/1.1" 401 128 Pause-Printer successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:02 -0500] Printer "deskjet_5550" stopped by "root".
==> cups/access_log <==
localhost - root [10/Jan/2010:11:04:02 -0500] "POST /printers/deskjet_5550 HTTP/1.1" 200 128 Pause-Printer successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:04 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3766)
I [10/Jan/2010:11:04:09 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3767)
==> cups/access_log <==
localhost - - [10/Jan/2010:11:04:09 -0500] "POST /printers/deskjet_5550 HTTP/1.1" 401 128 Resume-Printer successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:09 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3768)
==> cups/access_log <==
localhost - - [10/Jan/2010:11:04:09 -0500] "POST /printers/deskjet_5550 HTTP/1.1" 401 128 Resume-Printer successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:09 -0500] Printer "deskjet_5550" started by "root".
==> cups/access_log <==
localhost - root [10/Jan/2010:11:04:09 -0500] "POST /printers/deskjet_5550 HTTP/1.1" 200 128 Resume-Printer successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:11 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3769)
I [10/Jan/2010:11:04:15 -0500] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=3770)
==> cups/access_log <==
localhost - - [10/Jan/2010:11:04:15 -0500] "POST /jobs HTTP/1.1" 401 140 Release-Job successful-ok
==> cups/error_log <==
I [10/Jan/2010:11:04:15 -0500] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=3771)
==> cups/access_log <==
localhost - - [10/Jan/2010:11:04:15 -0500] "POST /jobs HTTP/1.1" 200 139 Release-Job successful-ok
Traceback (most recent call last):
File "/usr/share/hplip/ui4/systemtray.py", line 664, in notifierActivated
n.show()
glib.GError: The name org.freedesktop.Notifications was not provided by any .service files
==> everything.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted
==> daemon.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted
==> errors.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted
==> everything.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 603: invalid product id string ret=-1
==> daemon.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 603: invalid product id string ret=-1
==> errors.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 603: invalid product id string ret=-1
==> everything.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 1108: unable to open hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> daemon.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 1108: unable to open hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> errors.log <==
Jan 10 11:04:16 rockinTV hpijs[3782]: io/hpmud/musb.c 1108: unable to open hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> cups/page_log <==
deskjet_5550 21 somekool [10/Jan/2010:11:04:17 -0500] 1 1 - localhost tmpM1IFvl na_letter_8.5x11in one-sided
==> everything.log <==
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 603: invalid product id string ret=-1
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 1108: unable to open hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> daemon.log <==
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 603: invalid product id string ret=-1
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 1108: unable to open hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> errors.log <==
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 136: unable get_string_descriptor -1: Operation not permitted
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 603: invalid product id string ret=-1
Jan 10 11:04:17 rockinTV hp[3774]: io/hpmud/musb.c 1108: unable to open hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> everything.log <==
Jan 10 11:04:17 rockinTV hp[3774]: prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> daemon.log <==
Jan 10 11:04:17 rockinTV hp[3774]: prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> errors.log <==
Jan 10 11:04:17 rockinTV hp[3774]: prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
==> cups/error_log <==
I [10/Jan/2010:11:04:17 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
Traceback (most recent call last):
File "/usr/share/hplip/ui4/systemtray.py", line 664, in notifierActivated
n.show()
glib.GError: The name org.freedesktop.Notifications was not provided by any .service files
I [10/Jan/2010:11:04:18 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3783)
I [10/Jan/2010:11:04:26 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
D [10/Jan/2010:11:04:26 -0500] [Job 21] The following messages were recorded from 11:04:15 AM to 11:04:26 AM
D [10/Jan/2010:11:04:26 -0500] [Job 21] Job released by user.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Released by "root".
D [10/Jan/2010:11:04:26 -0500] [Job 21] job-sheets=none,none
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[0]="deskjet_5550"
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[1]="21"
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[2]="somekool"
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[3]="tmpM1IFvl"
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[4]="1"
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[5]="finishings=3 media=na_letter_8.5x11in number-up=1 sides=one-sided job-uuid=urn:uuid:87565748-3d01-3d21-6e06-062333533eed job-originating-host-name=localhost"
D [10/Jan/2010:11:04:26 -0500] [Job 21] argv[6]="/var/spool/cups/d00021-001"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[8]="HOME=/var/spool/cups/tmp"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[10]="[email protected]"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[11]="SOFTWARE=CUPS/1.4.2"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[13]="USER=root"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[14]="CUPS_SERVER=localhost"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[16]="IPP_PORT=631"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[17]="CHARSET=utf-8"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[18]="LANG=en_US.UTF-8"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[19]="PPD=/etc/cups/ppd/deskjet_5550.ppd"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[20]="RIP_MAX_CACHE=8m"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[21]="CONTENT_TYPE=application/postscript"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[22]="DEVICE_URI=hp:/usb/deskjet_5550?serial=MY27G1J3CK2L"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[23]="PRINTER_INFO=deskjet_5550"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[24]="PRINTER_LOCATION=Play room"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[25]="PRINTER=deskjet_5550"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[26]="CUPS_FILETYPE=document"
D [10/Jan/2010:11:04:26 -0500] [Job 21] envp[27]="FINAL_CONTENT_TYPE=printer/deskjet_5550"
D [10/Jan/2010:11:04:26 -0500] [Job 21] Started filter /usr/lib/cups/filter/pstops (PID 3772)
D [10/Jan/2010:11:04:26 -0500] [Job 21] Started filter /usr/lib/cups/filter/foomatic-rip-hplip (PID 3773)
D [10/Jan/2010:11:04:26 -0500] [Job 21] Started backend /usr/lib/cups/backend/hp (PID 3774)
D [10/Jan/2010:11:04:26 -0500] [Job 21] Page = 612x792; 18,36 to 594,783
D [10/Jan/2010:11:04:26 -0500] [Job 21] slow_collate=0, slow_duplex=0, slow_order=0
D [10/Jan/2010:11:04:26 -0500] [Job 21] Before copy_comments - %!PS-Adobe-3.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] %!PS-Adobe-3.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] %%BoundingBox: 0 0 612 792
D [10/Jan/2010:11:04:26 -0500] [Job 21] %%Pages: 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] Before copy_prolog - /hplipversion (3.9.12) def
D [10/Jan/2010:11:04:26 -0500] [Job 21] Before copy_setup - %%Page: 1 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] Before page loop - %%Page: 1 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] Copying page 1...
D [10/Jan/2010:11:04:26 -0500] [Job 21] pagew = 576.0, pagel = 747.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [10/Jan/2010:11:04:26 -0500] [Job 21] PageLeft = 18.0, PageRight = 594.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] PageTop = 783.0, PageBottom = 36.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] PageWidth = 612.0, PageLength = 792.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] foomatic-rip version $Revision=3.0.2.131$ running...
D [10/Jan/2010:11:04:26 -0500] [Job 21] Parsing PPD file ...
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option ColorSpace
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option Model
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option PrintoutMode
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option InputSlot
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option PageSize
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option Duplex
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option DryTime
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option Quality
D [10/Jan/2010:11:04:26 -0500] [Job 21] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip-hplip"
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option PageRegion
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option ImageableArea
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option PaperDimension
D [10/Jan/2010:11:04:26 -0500] [Job 21] Added option Font
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Parameter Summary
D [10/Jan/2010:11:04:26 -0500] [Job 21] -----------------
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Spooler: cups
D [10/Jan/2010:11:04:26 -0500] [Job 21] Printer: deskjet_5550
D [10/Jan/2010:11:04:26 -0500] [Job 21] Shell: /bin/sh
D [10/Jan/2010:11:04:26 -0500] [Job 21] PPD file: /etc/cups/ppd/deskjet_5550.ppd
D [10/Jan/2010:11:04:26 -0500] [Job 21] ATTR file:
D [10/Jan/2010:11:04:26 -0500] [Job 21] Printer model: HP Deskjet 5550 Foomatic/hpijs, hpijs 2.8.9.0
D [10/Jan/2010:11:04:26 -0500] [Job 21] Job title: tmpM1IFvl
D [10/Jan/2010:11:04:26 -0500] [Job 21] File(s) to be printed:
D [10/Jan/2010:11:04:26 -0500] [Job 21] <STDIN>
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [10/Jan/2010:11:04:26 -0500] [Job 21] Pondering option 'finishings=3'
D [10/Jan/2010:11:04:26 -0500] [Job 21] Unknown option finishings=3.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Pondering option 'media=na_letter_8.5x11in'
D [10/Jan/2010:11:04:26 -0500] [Job 21] Unknown "media" component: "na_letter_8.5x11in".
D [10/Jan/2010:11:04:26 -0500] [Job 21] Pondering option 'number-up=1'
D [10/Jan/2010:11:04:26 -0500] [Job 21] Unknown option number-up=1.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Pondering option 'sides=one-sided'
D [10/Jan/2010:11:04:26 -0500] [Job 21] Pondering option 'job-uuid=urn:uuid:87565748-3d01-3d21-6e06-062333533eed'
D [10/Jan/2010:11:04:26 -0500] [Job 21] Unknown option job-uuid=urn:uuid:87565748-3d01-3d21-6e06-062333533eed.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Pondering option 'job-originating-host-name=localhost'
D [10/Jan/2010:11:04:26 -0500] [Job 21] Unknown option job-originating-host-name=localhost.
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] ================================================
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] File: <STDIN>
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] ================================================
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Reading PostScript input ...
D [10/Jan/2010:11:04:26 -0500] [Job 21] --> This document is DSC-conforming!
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %RBINumCopies: 1
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] -----------
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginProlog
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%EndProlog
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] -----------
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginSetup
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginFeature: *PageSize Letter
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: PageSize=Letter --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: PageSize=Letter --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginFeature: *PrintoutMode Normal
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: PrintoutMode=Normal --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: PrintoutMode=Normal --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginFeature: *InputSlot Default
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: InputSlot=Default --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: InputSlot=Default --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginFeature: *Quality FromPrintoutMode
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: Quality=FromPrintoutMode --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: Quality=FromPrintoutMode --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginFeature: *DryTime Zero
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: DryTime=Zero --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %% FoomaticRIPOptionSetting: DryTime=Zero
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: DryTime=Zero --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginFeature: *Duplex None
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: Duplex=None --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %% FoomaticRIPOptionSetting: Duplex=None
D [10/Jan/2010:11:04:26 -0500] [Job 21] Option: Duplex=None --> Setting option
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%EndSetup
D [10/Jan/2010:11:04:26 -0500] [Job 21] Inserting PostScript code for CUPS' page accounting
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] -----------
D [10/Jan/2010:11:04:26 -0500] [Job 21] New page: 1 1
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BeginPageSetup
D [10/Jan/2010:11:04:26 -0500] [Job 21] Inserting option code into "PageSetup" section.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%EndPageSetup
D [10/Jan/2010:11:04:26 -0500] [Job 21] End of page header
D [10/Jan/2010:11:04:26 -0500] [Job 21] Stopping search for page header options
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: lineto % Move there...
D [10/Jan/2010:11:04:26 -0500] [Job 21] --> Output goes directly to the renderer now.
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Starting renderer
D [10/Jan/2010:11:04:26 -0500] [Job 21] renderer PID kid4=3779
D [10/Jan/2010:11:04:26 -0500] [Job 21] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 5550" -dDuplex=false -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=2,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- -
D [10/Jan/2010:11:04:26 -0500] [Job 21] JCL: <job data>
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Starting process 3780: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [10/Jan/2010:11:04:26 -0500] [Job 21] Wrote 1 pages...
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%Trailer
D [10/Jan/2010:11:04:26 -0500] [Job 21] --> Continue DSC parsing now.
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%Pages: 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] --> Continue DSC parsing now.
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%BoundingBox: 0 0 612 792
D [10/Jan/2010:11:04:26 -0500] [Job 21] --> Continue DSC parsing now.
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Found: %%EOF
D [10/Jan/2010:11:04:26 -0500] [Job 21] --> Continue DSC parsing now.
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Closing renderer
D [10/Jan/2010:11:04:26 -0500] [Job 21] PAGE: 1 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] STATE: +connecting-to-device
D [10/Jan/2010:11:04:26 -0500] [Job 21] prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/deskjet_5550?serial=MY27G1J3CK2L
D [10/Jan/2010:11:04:26 -0500] [Job 21] GPL Ghostscript 8.70: Unrecoverable error, exit code 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] Process 3780 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [10/Jan/2010:11:04:26 -0500] [Job 21] renderer return value: 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] renderer received signal: 1
D [10/Jan/2010:11:04:26 -0500] [Job 21] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [10/Jan/2010:11:04:26 -0500] [Job 21] error: No such file or directory (2)
D [10/Jan/2010:11:04:26 -0500] [Job 21] Cleaning up ...
D [10/Jan/2010:11:04:26 -0500] [Job 21] Killing process 3779 (KID4) with signal 15
D [10/Jan/2010:11:04:26 -0500] [Job 21] KID3 exited with status 3
D [10/Jan/2010:11:04:26 -0500] [Job 21] Renderer exit stat: 3
D [10/Jan/2010:11:04:26 -0500] [Job 21] Killing process 3779 (KID4) with signal 9
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Closing foomatic-rip.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Renderer process finished
D [10/Jan/2010:11:04:26 -0500] [Job 21] Process dying with "Error closing renderer", exit stat: 3
D [10/Jan/2010:11:04:26 -0500] [Job 21] error: Bad file descriptor (9)
D [10/Jan/2010:11:04:26 -0500] [Job 21] Cleaning up ...
D [10/Jan/2010:11:04:26 -0500] [Job 21] Killing process 3778 (KID3) with signal 15
D [10/Jan/2010:11:04:26 -0500] [Job 21] Killing process 3778 (KID3) with signal 9
D [10/Jan/2010:11:04:26 -0500] [Job 21] Error closing renderer
D [10/Jan/2010:11:04:26 -0500] [Job 21]
D [10/Jan/2010:11:04:26 -0500] [Job 21] Closing foomatic-rip.
D [10/Jan/2010:11:04:26 -0500] [Job 21] Backend returned status 1 (failed)
D [10/Jan/2010:11:04:26 -0500] [Job 21] End of messages
D [10/Jan/2010:11:04:26 -0500] [Job 21] printer-state=3(idle)
D [10/Jan/2010:11:04:26 -0500] [Job 21] printer-state-message="/usr/lib/cups/backend/hp failed"
D [10/Jan/2010:11:04:26 -0500] [Job 21] printer-state-reasons=none
I [10/Jan/2010:11:04:28 -0500] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=3784)
I [10/Jan/2010:11:04:33 -0500] Saving printers.conf...
I [10/Jan/2010:11:04:33 -0500] Saving job cache file "/var/cache/cups/job.cache"...
Mod edit: Added code tags [ewaller]
Last edited by ewaller (2011-06-26 23:53:15)
Similar Messages
-
Network printing Printer Pauses /usr/libexec/cups/backend/lpd failed
Morning,
I wonder if anyone has encountered the following problem?
NETWORK SET UP
We have a network of 8 macs & a Fuji Xerox c2255 printer all connected to a gigabit switch.
The Fuji Xerox has an fixed ip address 192.168.1.122 All devices have fixed ip address.
PROBLEM
Only one mac (Mac Pro) can print direct to the Fuji Xerox Printer. This Mac Pro is on 10.5.8. and it is sharing its printer connection with the rest of the studio. Oddily enough, the Appletalk function is turned on. When the appletalk function is turned off on the ethernet port, it can not longer directly print nor share the Fuji Xerox with the rest of the network
The remainder of the Macs are all on 10.6.4 or 10.6.3. When the printer is first installed on the an iMac client, it can print from text files, offices docs, from safari or firefox with out any problem. But when it attempts to print a pdf file (preview) or Indesign files then it pauses the printer. Within the printer queue, if attempt to restart the printer, the printer pauses. It remains in this state indefinitely. When looking at the CUPS logs via the console, the error is printer-state-message="/usr/libexec/cups/backend/lpd failed". This is the message displayed on all the clients that attempt to print directly (via LPD) to the Fuji Xerox. Once this error message is logged, the iMac can no longer print out text files nor word documents.
The following console log is typically of what all the 10.6.x clients are reporting,
D [15/Jul/2010:18:38:07 +1000] [Job 4] STATE: +connecting-to-device
D [15/Jul/2010:18:38:07 +1000] [Job 4] Looking up "192.168.1.122"...
D [15/Jul/2010:18:38:07 +1000] [Job 4] Connecting to 192.168.1.122:515 for printer
D [15/Jul/2010:18:38:07 +1000] [Job 4] Connecting to printer...
D [15/Jul/2010:18:38:07 +1000] [Job 4] STATE: -connecting-to-device
D [15/Jul/2010:18:38:07 +1000] [Job 4] Connected to printer...
D [15/Jul/2010:18:38:07 +1000] [Job 4] Connected to 192.168.1.122:515 (IPv4) (local port 1008)...
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.1 = 7500
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.2 = 1170
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.3 = 400
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.4 = 585
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.5 = 25000
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.6 = 18400
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.7 = 19600
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.8 = 19200
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.9 = 19600
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.10 = 200000
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.11 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.12 = 200000
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.13 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.14 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.15 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.16 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.17 = 200000
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.18 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.19 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.20 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.21 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] prtMarkerSuppliesLevel.1.22 = -3
D [15/Jul/2010:18:38:07 +1000] [Job 4] ATTR: marker-levels=50,75,25,50,100,46,49,48,49,100,-1,100,-1,-1,-1,-1,100,-1,-1,-1,- 1,-1
D [15/Jul/2010:18:38:07 +1000] [Job 4] lpd_command 02
D [15/Jul/2010:18:38:07 +1000] [Job 4] Sending command string (2 bytes)...
D [15/Jul/2010:18:38:07 +1000] [Job 4] Reading command status...
D [15/Jul/2010:18:38:07 +1000] [Job 4] lpd_command returning 1
D [15/Jul/2010:18:38:07 +1000] [Job 4] Backend returned status 1 (failed)
D [15/Jul/2010:18:38:07 +1000] [Job 4] Printer stopped due to backend errors; please consult the error_log file for details.
D [15/Jul/2010:18:38:07 +1000] [Job 4] End of messages
D [15/Jul/2010:18:38:07 +1000] [Job 4] printer-state=5(stopped)
D [15/Jul/2010:18:38:07 +1000] [Job 4] printer-state-message="/usr/libexec/cups/backend/lpd failed"
D [15/Jul/2010:18:38:07 +1000] [Job 4] printer-state-reasons=media-low-report,toner-low-report,paused
APPROACHED USED TO DATE
1. I have reset the Printer subsystem for all clients
2. I have reinstalled the latest PS drivers for this model of Fuji Xerox c2255. I have been on the phone with Fuji Xerox Technical support, FX DocuPrint C2255 v3017.104PS , and confirmed that this is the latest (and only) availible drivers for 10.5-10.6
3. I have had the Studio manger arrange to have the Fuji Xerox printer fully serviced and had the firmware updated to latest version.
4. Via Fuji Xerox Technical support, they advise I use the following settings for LDP printing for FX c2255,
Latest driver for 10.6 : 3017.104.ps
Setting to check :
Queue name : PS
Enable EtherTalk
LPD port : from auto to PS
Software version :
Controller plus PS role 1.100.21
5. I have (manually) deleted the all the FujiXerox drivers from /Library/Printers/ then repair permissions, then reinstalled the latest version of the Fuji Xerox driver from 10.6
WEIRDNESS
1. With the 10.6.x client, when the drivers are first installed, if I create a simply indesign file, I can print directly to the Fuji Xerox. If I then attempt to print out a previously created indesign document, it will pause the printer and the console (CUPS error_log) will display the above result. If I switch my printer to the Mac Pro 10.5.8 sharing the printer, the same document can print out via the hosted Fuji Xerox.
2. The Mac Pro 10.5.8 can print all documents directly to the Fuji Xerox regardless of the format of the document. It is also able to share the printer with the dept. This is the sole means of the dept being able to print out artwork.
3. Prior to the firmware upgrade I have tried an iMac printing/hosting the Fuji Xerox via direct USB cable. The same behaviour as above were experienced.
4. This model of Fuji Xerox only supports LDP or direct USB connection.
5. I have tried using the Bonjour address to configure the printer but the results are no better nor no worse. At one stage, all the iMacs were able to print sucessfully for a day but then 'stopped working' (as reported by the studio manager). They then switch back to the Mac Pro hosting the printer to continue working.
6. I discovered that if the drivers are installed and then a Permission repair carried out (via Disk Utility), it would change all the driver permissions for the files in the /Library/Printers/FujiXerox. When attempting to print (with the revised permissions), the 'print' button would not 'work'; the print dialog would present until Cancel was selected. It was almost like changing the permissions has lock out the functionality of being able to print. Manually moving the FujiXerox to Trash and reinstalling the drivers reverted the printer back to the above behaviour.
7. I discovered that when installing the printer, using LPD, it is better to allow the default settings. If I stuplated that the Fuji Xerox is a two bin set up, rather then a single bin set up, I can not print out from any application. If, I left settings as default, my assumption is that the apps can mange the printer features.
I've been working on this for a while now and this is driving me crazy. I would appreciate any suggestions. Has anyone come across this issue before ? Any ideas ?
Thank you,
FredHi Pahu,
Thanks for your reply. I noticed that you have replied to a number of other postings as well - you're a good sort !! Your knowledge and contribution to this forum is much appreciated and very welcome.
Yes, this is a curly problem. I've actually been trying to resolve it for several months. Interesting the c2255 is not stated as being supported under Apple's Fuji drivers release for SN. The driver has to be downloaded directly from Fuji Xerox. The following is from the c2255 Config page,
Communication Settings
Ethernet Rated Speed
Connection Type Auto
MAC Address "08:00:37.8C:76.0C"
TCP/IP
IP Mode IPv4 Mode
IPv4
IP Address Resolution STATIC
IP Address "192.168.1.122"
Subnet Mask "255.255.255.0"
Gateway Address "192.168.1.1"
IP Filter Disabled
Status Ready
WINS
DHCP Address Resolution Disabled
Primary WINS Server Address “”
Secondary WINS Server Address “”
DNS
Domain Name “”
IPv4
DHCP Address Resolution Disabled
Preferred DNS Server “”
Alternate DNS Server 1 “”
Alternate DNS Server 2 “”
Dynamic DNS Registration Disabled
SSL / TLS
HTTP - SSL 1 TLS Communication Disabled
LDAP - SSL ' TLS Communication Disabled
IPSec
IPSec Communication Disabled
IEEE 802. lx
]EEE802.lx Disabled
SNMP
Port Status Enabled
Transport Protocol UDP
SNMP Version v1 / v2c
Internet Services
Port Status Enabled
Port Number 80
Maximum Number of Sessions 5
Connection Time-Out 30 seconds
SOAP Enabled
Port Status Port Number 80
Maximum Number of Sessions 3
Connection Time-Out 30 seconds
USB-1 (2.0)
Port Status Enabled
Print Mode ‘Postscript 3’
PJL Enabled
Adobe Communication Protocol Standard
Auto Eject Time 30 seconds
USB-2 (2.0) Port Status Enabled
Print Mode Auto
PJL Enabled
Adobe Communication Protocol Standard
Auto Eject Time 30 seconds
NetWare Port Status Disabled
LPD
Port Status Enabled
Print Mode ‘Postscript 3’
PJL Enabled
TBCP Filter Disabled
Port Number 515
Maximum Number of Sessions 5
Connection Time-Out 16 Seconds
SMB
Port Status Enabled
Prim Mode Auto
PJL Enabled
Transport Protocol TCP/IP. NetBEUI
TBCP Filler Disabled
Workgroup "WORKGROUP"
Host Name "AP-8C760C"
Auto Master Mode Off
Password Encryption On
Maximum Number of Sessions 5
Unicode Support Disabled
Administrator Name "ADMIN"
EtherTalk
Port Status Enabled
Print Mode PostScript 3'
PJL Enabled
Printer Name "DocuPrint C2255”
Zone Name “*”
IPP
Port Slatus Disabled
Port 9100
Port Slatus Enabled
Print Mode Auto
PJL Enabled
Pon Number 9100
TBCP Filter Disabled
End of Job Timeout 60 Seconds
WSD
Port Number 80
Data Receive Time-Out 30 Seconds
Maximum TTL 1
Maximum Number of Subscribers 50
Notification Delivery Time-Out 8 Seconds
Print Service
Port Status Enabled
Print Mode Auto
PJL Enabled
TBCP Filter Disabled
UPnP
Discovery
Port Status Enabled
Port Number 80
SSDP
Valid Advertising Period 180 Minutes
Maximum TTL 1
Bonjour
Port Status Enabled
Printer Name "DocuPrint C2255
What is interesting is that this problem occurs with all the 10.6.x macs. There is a Mac Pro that has been upgrade to 10.6; an iMac that has had a complete rebuild with 10.6; two iMacs that have been upgraded from 10.5.x and two new iMacs that came preinstalled with 10.6.2. None of these Macs can direct connect to the Fuji Xerox c2255. Only the 10.5.8 Mac can direct connect to the FX c2255 and can host (or share) the FX c2255 printer to the rest of the network.
One of the bizarra aspects is that the all the Macs can print text files, offices docs, web pages, etc, etc directly to the Fuji Xerox c2255 without any problem. BUT try to print a pdf file from preview or from Indesign and it resorts back to the status described earlier. Oddily enough, if I create a simple pdf in Indesign (circle, squares, a paragraph of text), I can print out the file using Indesign, directly to the printer. If I import one of the previously created documents, the printer reverts to the status described earlier. HOWEVER, if I take the same document and print via the Mac Pro 10.5.8 hosting/sharing the printer, the document will print without any problem. What the... ??!?!?!
I thought it might be a firmware problem but following the onsite service of the printer, I think I can rule that out.
Can you see anything that I might be missing ???
Thank you,
Fred -
"/usr/lib/cups/backend/usb failed" After Kernel Upgrade
When I upgraded my kernel to 2.6.31.5-1 from 2.6.31.4-1 and tried printing a file, I got this error from cups:
"/usr/lib/cups/backend/usb failed"
The printer was working perfectly fine yesterday.
Upgrade I did today before rebooting my pc to use the new kernel:
[2009-10-27 09:49] upgraded compositeproto (0.4-2 -> 0.4.1-1)
[2009-10-27 09:49] upgraded consolekit (0.3.1-1 -> 0.4.1-1)
[2009-10-27 09:49] upgraded dbus-glib (0.80-1 -> 0.82-1)
[2009-10-27 09:49] upgraded dmxproto (2.2.99.1-1 -> 2.3-1)
[2009-10-27 09:49] upgraded fontcacheproto (0.1.2-2 -> 0.1.3-1)
[2009-10-27 09:49] upgraded pango (1.26.0-1 -> 1.26.0-2)
[2009-10-27 09:49] upgraded shared-mime-info (0.60-1 -> 0.70-1)
[2009-10-27 09:49] upgraded gtk2 (2.18.2-1 -> 2.18.3-1)
[2009-10-27 09:49] upgraded hicolor-icon-theme (0.10-2 -> 0.11-1)
[2009-10-27 09:49] upgraded kbproto (1.0.3-2 -> 1.0.4-1)
[2009-10-27 09:49] upgraded module-init-tools (3.10-2 -> 3.11.1-1)
[2009-10-27 09:50] >>> Updating module dependencies. Please wait ...
[2009-10-27 09:50] >>> MKINITCPIO SETUP
[2009-10-27 09:50] >>> ----------------
[2009-10-27 09:50] >>> If you use LVM2, Encrypted root or software RAID,
[2009-10-27 09:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-10-27 09:50] >>> More information about mkinitcpio setup can be found here:
[2009-10-27 09:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-10-27 09:50]
[2009-10-27 09:50] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-10-27 09:50] ==> Building image "default"
[2009-10-27 09:50] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-10-27 09:50] :: Begin build
[2009-10-27 09:50] :: Parsing hook [base]
[2009-10-27 09:50] :: Parsing hook [udev]
[2009-10-27 09:50] :: Parsing hook [autodetect]
[2009-10-27 09:50] :: Parsing hook [pata]
[2009-10-27 09:50] :: Parsing hook [scsi]
[2009-10-27 09:50] :: Parsing hook [sata]
[2009-10-27 09:50] :: Parsing hook [usb]
[2009-10-27 09:50] :: Parsing hook [pcmcia]
[2009-10-27 09:50] :: Parsing hook [usbinput]
[2009-10-27 09:50] :: Parsing hook [keymap]
[2009-10-27 09:50] :: Parsing hook [filesystems]
[2009-10-27 09:50] :: Generating module dependencies
[2009-10-27 09:50] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-10-27 09:50] ==> SUCCESS
[2009-10-27 09:50] ==> Building image "fallback"
[2009-10-27 09:50] ==> Running command: /sbin/mkinitcpio -k 2.6.31-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-10-27 09:50] :: Begin build
[2009-10-27 09:50] :: Parsing hook [base]
[2009-10-27 09:50] :: Parsing hook [udev]
[2009-10-27 09:50] :: Parsing hook [pata]
[2009-10-27 09:50] :: Parsing hook [scsi]
[2009-10-27 09:51] :: Parsing hook [sata]
[2009-10-27 09:51] :: Parsing hook [usb]
[2009-10-27 09:51] :: Parsing hook [pcmcia]
[2009-10-27 09:51] :: Parsing hook [usbinput]
[2009-10-27 09:51] :: Parsing hook [keymap]
[2009-10-27 09:51] :: Parsing hook [filesystems]
[2009-10-27 09:51] :: Generating module dependencies
[2009-10-27 09:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-10-27 09:51] ==> SUCCESS
[2009-10-27 09:51] upgraded kernel26 (2.6.31.4-1 -> 2.6.31.5-1)
[2009-10-27 09:51] upgraded libfetch (2.25-1 -> 2.26-1)
[2009-10-27 09:51] upgraded libgpg-error (1.6-1 -> 1.7-2)
[2009-10-27 09:51] upgraded libpciaccess (0.10.8-1 -> 0.10.9-1)
[2009-10-27 09:51] upgraded libspectre (0.2.2-2 -> 0.2.3-1)
[2009-10-27 09:51] upgraded xf86dgaproto (2.0.99.1-1 -> 2.1-1)
[2009-10-27 09:51] upgraded libxxf86dga (1.0.99.1-1 -> 1.1.1-0.1)
[2009-10-27 09:51] upgraded mlocate (0.22.2-1 -> 0.22.2-2)
[2009-10-27 09:51] upgraded sqlite3 (3.6.18-1 -> 3.6.19-1)
[2009-10-27 09:51] upgraded nss (3.12.4-1 -> 3.12.4-2)
[2009-10-27 09:51] upgraded pcmanfm (0.5.1-2 -> 0.5.2-1)
[2009-10-27 09:51] upgraded perl (5.10.1-3 -> 5.10.1-5)
[2009-10-27 09:51] upgraded pixman (0.16.0-1 -> 0.16.2-1)
[2009-10-27 09:51] upgraded popt (1.14-1 -> 1.15-1)
[2009-10-27 09:51] upgraded pygtk (2.16.0-1 -> 2.16.0-2)
[2009-10-27 09:51] upgraded python (2.6.3-2 -> 2.6.4-1)
[2009-10-27 09:51] upgraded qtcurve-gtk2 (0.69.0-1 -> 0.69.2-1)
[2009-10-27 09:51] upgraded randrproto (1.3.0-1 -> 1.3.1-1)
[2009-10-27 09:51] upgraded recordproto (1.13.2-2 -> 1.14-1)
[2009-10-27 09:51] upgraded tzdata (2009n-1 -> 2009o-1)
[2009-10-27 09:51] upgraded xbitmaps (1.0.1-2 -> 1.1.0-1)
[2009-10-27 09:51] upgraded xcursor-themes (1.0.1-2 -> 1.0.2-1)
[2009-10-27 09:51] upgraded xf86miscproto (0.9.2-2 -> 0.9.3-1)
[2009-10-27 09:51] upgraded xf86vidmodeproto (2.2.99.1-1 -> 2.3-1)
[2009-10-27 09:51] upgraded xineramaproto (1.1.99.1-1 -> 1.2-1)
[2009-10-27 09:51] upgraded xorg-apps (7.4-2 -> 7.5-1.1)
[2009-10-27 09:51] upgraded xproto (7.0.15-1 -> 7.0.16-1)
[2009-10-27 09:51] upgraded xulrunner (1.9.1.3-1 -> 1.9.1.3-2)
Last edited by ShadowKyogre (2009-10-28 01:32:52)I downgraded the kernel and the printer works again and I forgot to mention I had usblp blacklisted both before and after I upgraded.
-
Cannot print PDF files: "/usr/lib/cups/filter/pdftops failed"
Hi
I have a HP Deskjet D1460 printer (crap, i know ). I'm using hplip 3.11.1 drivers and CUPS 1.4.6hplip 3.11.1.
Today i wanted to print a pdf file, and my printer just silently refused to work, like they always do I did some log-scavenging, and found this rather long one:
E [11/Feb/2011:12:44:36 +0100] [Job 24] Job stopped due to filter errors; please consult the error_log file for details.
D [11/Feb/2011:12:44:36 +0100] [Job 24] The following messages were recorded from 12:44:30 to 12:44:36
D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding start banner page "none".
D [11/Feb/2011:12:44:36 +0100] [Job 24] Queued on "Deskjet_D1400" by "kaszak".
D [11/Feb/2011:12:44:36 +0100] [Job 24] Auto-typing file...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Request file type is application/pdf.
D [11/Feb/2011:12:44:36 +0100] [Job 24] File of type application/pdf queued by "kaszak".
D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding end banner page "none".
D [11/Feb/2011:12:44:36 +0100] [Job 24] job-sheets=none,none
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[0]="Deskjet_D1400"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[1]="24"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[2]="kaszak"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[3]="przelew.pdf"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[4]="1"
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[5]="finishings=3 number-up=1 page-ranges=1 job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5 job-originating-host-name=localhost time-at-creation=1297424670 time-at-processing=1297424670 AP_D_InputSlot="
D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[6]="/var/spool/cups/d00024-001"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[8]="HOME=/var/spool/cups/tmp"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[10]="SERVER_ADMIN=root@localhost"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[11]="SOFTWARE=CUPS/1.4.6"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[13]="USER=root"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[16]="IPP_PORT=631"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[17]="CHARSET=utf-8"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[18]="LANG=pl_PL.UTF-8"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[19]="PPD=/etc/cups/ppd/Deskjet_D1400.ppd"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[20]="RIP_MAX_CACHE=8m"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[21]="CONTENT_TYPE=application/pdf"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[22]="DEVICE_URI=hp:/usb/Deskjet_D1400_series?serial=TH7B13311X04Y2"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[23]="PRINTER_INFO="
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[24]="PRINTER_LOCATION="
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[25]="PRINTER=Deskjet_D1400"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[26]="CUPS_FILETYPE=document"
D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[27]="FINAL_CONTENT_TYPE=printer/Deskjet_D1400"
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/pdftops (PID 2793)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/foomatic-rip-hplip (PID 2794)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started backend /usr/lib/cups/backend/hp (PID 2795)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pdftops (PID 2796)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pstops (PID 2797)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Page = 612x792; 18,36 to 594,783
D [11/Feb/2011:12:44:36 +0100] [Job 24] slow_collate=0, slow_duplex=0, slow_order=0
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_comments - %!PS-Adobe-3.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] %!PS-Adobe-3.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%LanguageLevel: 3
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentSuppliedResources: (atend)
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentMedia: plain 596 842 0 () ()
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%BoundingBox: 0 0 596 842
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%Pages: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] %%EndComments
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_prolog - %%BeginDefaults
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_setup - %%BeginSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] foomatic-rip version $Revision=3.0.2.131$ running...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Parsing PPD file ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ColorSpace
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Resolution
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageSize
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Model
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PrintoutMode
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Quality
D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip-hplip"
D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip-hplip"
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageRegion
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ImageableArea
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PaperDimension
D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Font
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Parameter Summary
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------------
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Spooler: cups
D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer: Deskjet_D1400
D [11/Feb/2011:12:44:36 +0100] [Job 24] Shell: /bin/sh
D [11/Feb/2011:12:44:36 +0100] [Job 24] PPD file: /etc/cups/ppd/Deskjet_D1400.ppd
D [11/Feb/2011:12:44:36 +0100] [Job 24] ATTR file:
D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer model: HP Deskjet d1400 Series hpijs, 3.11.1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Job title: przelew.pdf
D [11/Feb/2011:12:44:36 +0100] [Job 24] File(s) to be printed:
D [11/Feb/2011:12:44:36 +0100] [Job 24] <STDIN>
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'finishings=3'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option finishings=3.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'number-up=1'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option number-up=1.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'page-ranges=1'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option page-ranges=1.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-originating-host-name=localhost'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-originating-host-name=localhost.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-creation=1297424670'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-creation=1297424670.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-processing=1297424670'
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-processing=1297424670.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'AP_D_InputSlot='
D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option AP_D_InputSlot=.
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] File: <STDIN>
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Reading PostScript input ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] --> This document is DSC-conforming!
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %RBINumCopies: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another "%%Begin..." comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginProlog
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndProlog
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PageSize Letter
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PrintoutMode Normal
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *Quality FromPrintoutMode
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
D [11/Feb/2011:12:44:36 +0100] [Job 24] Before page loop - %%Page: 1 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Copying page 1...
D [11/Feb/2011:12:44:36 +0100] [Job 24] pagew = 576.0, pagel = 747.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [11/Feb/2011:12:44:36 +0100] [Job 24] PageLeft = 18.0, PageRight = 594.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] PageTop = 783.0, PageBottom = 36.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] PageWidth = 612.0, PageLength = 792.0
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting PostScript code for CUPS' page accounting
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
D [11/Feb/2011:12:44:36 +0100] [Job 24] New page: 1 1
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginPageSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting option code into "PageSetup" section.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndPageSetup
D [11/Feb/2011:12:44:36 +0100] [Job 24] End of page header
D [11/Feb/2011:12:44:36 +0100] [Job 24] Stopping search for page header options
D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: S
D [11/Feb/2011:12:44:36 +0100] [Job 24] --> Output goes directly to the renderer now.
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting renderer
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer PID kid4=2802
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3320" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting process 2803: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [11/Feb/2011:12:44:36 +0100] [Job 24] JCL: <job data>
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2796 (pdftops) exited with no errors.
D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/hpijs/hpijs.cpp 650: WARNING: color pen has low ink
D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 9
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 9
D [11/Feb/2011:12:44:36 +0100] [Job 24] Caught termination signal: Job canceled
D [11/Feb/2011:12:44:36 +0100] [Job 24]
D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/backend/hp.c 839: ERROR: null print job total=0
D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2797 (pstops) crashed on signal 13!
D [11/Feb/2011:12:44:36 +0100] [Job 24] End of messages
D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state=3(idle)
D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-message="/usr/lib/cups/filter/pdftops failed"
D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-reasons=marker-supply-low-warning
E [11/Feb/2011:12:45:56 +0100] [Job 22] Stopping unresponsive job!
E [11/Feb/2011:12:49:41 +0100] [Job 24] Stopping unresponsive job!
To be honest, it looks more like a Chinese poem rather than error log. I found this part the most disturbing:
D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
Anyone had such problems before? Just don't tell me this cursed device demands a sacrifice from freshly produced virgin paper sheets to chew on.
Other non-pdf documents print succesfully.just got hit with thie same error on my canon printer, and I was told I should try reinstalling the printer (not sure if that's meant for the driver or the actual printer in CUPS, but I intend to try both...
-
Unable to print: /usr/libexec/cups/backend/dnssd failed HELP!!!
Hi Guys,
I am on a Macbook Pro running OS 10.7.3, and until some time ago I was being able to print on a HP Laserjet P1102w shared over ethernet from a iMac running OS 10.5.8.
Then something happened (probably as a result of an update) and I can't print on that shared printer any more. The error I get on the printer is that annoying /usr/libexec/cups/backend/dnssd failed, OR the "authentication required" message. The printer works just fine on the iMac...
I tried several fixes posted here and there such as re-setting the printing system and re-adding the printer in both machines, tried to fix it over the CUPS interface, and even tried this guy's approach:
http://reviews.cnet.com/8301-13727_7-20074767-263/how-to-fix-printers-not-workin g-in-os-x-10.6.8/?part=rss&tag=feed&subj=MacFixIt
Unfortunately nothing worked.
I noticed two weird things:
1) When I try to change the settings in the cups interface at the iMac, it won't let me apply the changes, it's like it is locked...
2) When I pull out the console at the MacBook, the log for the time the error comes out is:
kernel: IOSurface buffer allocation size is zero
Can someone please give me a hint of what's going on? This is nerve wrecking.
Many thanks!Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot. -
Today, after printing normally, wanted tp print another page with oki ES3640a3 and epson 7900 too.
received the message that the printer stopped, and than
"client-error-not-possible"
and
"/usr/libexec/cups/backend/usb failed"
can anyone help, I am a professional photographer and cannot miss the epson 7900.
I received the messages on my imac OSx 10.5.8
and my mac book pro OS Lion
thanksHi, did you restart the printers?
Is there a stuck job in them?
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
i get the following error when i try to print to a brother hl 5470dw printer using mac 10.6.8 : /usr/libexec/cups/filter/pstoraster failed
This seems to come up sometimes. Here is a very detailed discussion, but at the end is a configuration file entry that might be simple to fix (or not): /usr/libexec/cups/filter/pstocupsraster failed | Apple Support Communities
-
Usr/libexec/cups/filter/pstops failed - 10.6.3 with Acrobat 9.3.2
MacOS 10.6.3
Adobe Acrobat 9 Pro (9.3.2)
Printer: Xerox Phaser 8550, Driver 1.3
Printing with Adobe PDF Printer fails in all applications
cups
error_log:
D [14/May/2010:21:22:27 +0200] [Job 59] Starting job
D [14/May/2010:21:22:27 +0200] [Job 59] Opening Acrobat Distiller
D [14/May/2010:21:22:27 +0200] [Job 59] Could not load Acrobat Distiller.
D [14/May/2010:21:22:27 +0200] [Job 59] End of messages
D [14/May/2010:21:22:27 +0200] [Job 59] printer-state=3(idle)
D [14/May/2010:21:22:27 +0200] [Job 59] printer-state-message="/usr/libexec/cups/filter/pstops failed"
D [14/May/2010:21:22:27 +0200] [Job 59] printer-state-reasons=none
access_log
localhost - - [14/May/2010:21:28:09 +0200] "POST /jobs HTTP/1.1" 200 136 Cancel-Job successful-ok
localhost - - [14/May/2010:21:28:11 +0200] "POST /jobs HTTP/1.1" 200 136 Cancel-Job successful-ok
localhost - - [14/May/2010:21:28:27 +0200] "POST /printers/Adobe_PDF HTTP/1.1" 200 1655 Create-Job successful-ok
localhost - - [14/May/2010:21:28:27 +0200] "POST /printers/Adobe_PDF HTTP/1.1" 200 625794 Send-Document successful-ok
heureka - here is the solution:
http://indesignsecrets.com/acrobats-adobe-pdf-printer-replaced-in-snow-leopard.php
UeliThere is no AdobePDF printer in Snow Leopard.
http://kb2.adobe.com/cps/509/cpsid_50981.html -
/usr/libexec/cups/filter cgpdftoraster failed (Epson Stylus Photo 1400)
10.5.2 appears to have added support for my printer when it is plugged in to my airport express - before I upgraded it did not work at all, now it works almost perfectly.
However, when i try to print a book from aperture (Aperture 2.0 Trial), the printer bounces on the dock and the job says that it is working, then an error flashes up and disappears and then the status changes to "stopped".
I managed to take a screenshot in the second that the error is displayed, and it is as follows:
"/usr/libexec/cups/filter cgpdftoraster failed"
I have not tried printing a book when the printer is directly plugged into my laptop yet, as this is the first time that I have ever tried - everything else seems to work perfectly (Printing photos / printing from Lightroom), but not printing this book.
The printer is an Epson Stylus Photo 1400 (A3+), but it does not seem to be a printer problem - as it never tries to send the file to the printer, it breaks before it gets that far.
Does anyone know why this is happening and have any suggestions about how to fix it?
Thanks.I concur, Aperture 2.0.1 on OS X 10.5.2 was NOT able to print to the Epson Stylus Photo 1400, and resulted in an "/usr/libexec/cups/filter/cgpdftoraster failed" message at the print driver.
Exporting the image from Aperture to Photoshop, and printing using Photoshop, printed effortlessly; I was even able to use "Super B" paper (13"x19") Sheet-Feeder Borderless with Ultra Premium Photo Paper Semi-Glossy. -
Compiz: can't find /usr/lib/compizconfig/backends/libgconf.so
I just followed the arch guide on how to install compiz, and when i run fusion-icon in the terminal i get this error:
libccs: dlopen: /usr/lib/compizconfig/backends/libgconf.so: cannot open shared object file: No such file or directory
any ideas guys?I used this guide to install the 0.8 series: https://wiki.archlinux.org/index.php/Co … 0.8_series
These are the compiz-related packages i currently have installed:
ccsm
compiz-bcop
compiz-core
compiz-fusion-plugins-extra
compiz-fusion-plugins-main
compizconfig-python
fusion-icon
gnome-session-compiz
libcompizconfig
I am currently using the Cinnamon DE with GDM as my display manager. My goal is to run compiz as a standalone window manager. The terminal output from my original post is what happens when i run fusion-icon in the terminal while using Cinnamon. When trying to log in with Compiz as a standalone window manager, the screen is black after I log in, and stays that way no matter how long i wait.
Thanks for the reply! It's my first forum post. Let me know if you need any other information. -
Lost all my /usr/lib files in trial so solve glib dependency
Hi,
Failing to upgrade my Arch_X86-64 system due to glibc dependencies, I've followed an advice in the forum and tried to move (as root) all files in usr/lib to a (temporary, initially empty) directory I've created. Now I can't see any files, neither in /usr/lib nor in the backup direvtory (see terminal output below).
Please advise how to restore my system?
thanks
Miki Badt
copy of terminal output
root /usr/lib # mv * /lib_back/
root /usr/lib # pacman -Syu
pacman: error while loading shared libraries: libalpm.so.7: cannot open shared object file: No such file or directory
root /usr/lib # mv /lib_back/* .
mv: error while loading shared libraries: libacl.so.1: cannot open shared object file: No such file or directory
root /usr/lib # ls
ls: error while loading shared libraries: libcap.so.2: cannot open shared object file: No such file or directory
root /usr/lib # cd /lib_back/
root /lib_back # ls
ls: error while loading shared libraries: libcap.so.2: cannot open shared object file: No such file or directory
root /lib_back # cd /usr/lib
root /usr/lib # ls
ls: error while loading shared libraries: libcap.so.2: cannot open shared object file: No such file or directory
root /usr/lib #boot from arch iso and chroot into your system
(eg. mount /dev/sda1 /mnt && chroot /mnt)
and revert your commands, simple as that ! -
Why are systemd startup scripts under /usr/lib and not /etc? [SOLVED]
Just out of curiosity: why are systemd configuration files (startup scripts, or whatever they are called) in /usr/lib/systemd/system/ and not somewhere under /etc?
After all, they are configuration files and not libraries.
It may simply be my lack of knowledge of the standard linux filesystem layout, so please enlighten me.
Last edited by louic (2015-04-09 09:12:11)https://wiki.archlinux.org/index.php/Sy … unit_files
-
Cannot print with Brother HL-2140 (CUPS does not complain) [SOLVED]
I've got a brother HL-2140 which I've installed according to these instructions: http://wiki.archlinux.org/index.php/Brother_HL-2040. I am using the 2040 driver instead of the 2140 as there are reported issues with the 2140 driver and the 2040 driver is supposed to work anyways. It does in Ubuntu, and according to this Arch user: http://interskh.info/2008/12/install-br … linux.html
When I go to print a test page, nothing happens and the printer makes no sound whatsoever.
Cups Error Log:
I [03/Jan/2009:13:25:16 -0800] Scheduler shutting down normally.
D [03/Jan/2009:13:25:16 -0800] Discarding unused server-stopped event...
D [03/Jan/2009:13:25:16 -0800] cupsdCloseClient: 6
D [03/Jan/2009:13:25:16 -0800] Saving remote.cache...
I [03/Jan/2009:13:25:16 -0800] Saving job cache file "/var/cache/cups/job.cache"...
I [03/Jan/2009:13:25:46 -0800] Listening to 127.0.0.1:631 (IPv4)
I [03/Jan/2009:13:25:46 -0800] Loaded configuration file "/etc/cups/cupsd.conf"
I [03/Jan/2009:13:25:46 -0800] Using default TempDir of /var/spool/cups/tmp...
I [03/Jan/2009:13:25:46 -0800] Configured for up to 100 clients.
I [03/Jan/2009:13:25:46 -0800] Allowing up to 100 client connections per host.
I [03/Jan/2009:13:25:46 -0800] Using policy "default" as the default!
I [03/Jan/2009:13:25:46 -0800] Full reload is required.
I [03/Jan/2009:13:25:46 -0800] Loaded MIME database from '/etc/cups': 35 types, 39 filters...
D [03/Jan/2009:13:25:46 -0800] Loading printer HL2040...
I [03/Jan/2009:13:25:46 -0800] Loading job cache file "/var/cache/cups/job.cache"...
D [03/Jan/2009:13:25:46 -0800] [Job 16] Loading from cache...
D [03/Jan/2009:13:25:46 -0800] [Job 17] Loading from cache...
D [03/Jan/2009:13:25:46 -0800] [Job 18] Loading from cache...
D [03/Jan/2009:13:25:46 -0800] [Job 19] Loading from cache...
I [03/Jan/2009:13:25:46 -0800] Full reload complete.
I [03/Jan/2009:13:25:46 -0800] Cleaning out old temporary files in "/var/spool/cups/tmp"...
E [03/Jan/2009:13:25:46 -0800] Unable to find IP address for server name "uncle-bilbo"!
I [03/Jan/2009:13:25:46 -0800] Listening to 127.0.0.1:631 on fd 3...
I [03/Jan/2009:13:25:46 -0800] Resuming new connection processing...
E [03/Jan/2009:13:25:46 -0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
D [03/Jan/2009:13:25:46 -0800] Discarding unused server-started event...
D [03/Jan/2009:13:25:47 -0800] Report: clients=0
D [03/Jan/2009:13:25:47 -0800] Report: jobs=4
D [03/Jan/2009:13:25:47 -0800] Report: jobs-active=0
D [03/Jan/2009:13:25:47 -0800] Report: printers=1
D [03/Jan/2009:13:25:47 -0800] Report: printers-implicit=0
D [03/Jan/2009:13:25:47 -0800] Report: stringpool-string-count=293
D [03/Jan/2009:13:25:47 -0800] Report: stringpool-alloc-bytes=8304
D [03/Jan/2009:13:25:47 -0800] Report: stringpool-total-bytes=6008
D [03/Jan/2009:13:25:52 -0800] cupsdAcceptClient: 7 from localhost:631 (IPv4)
D [03/Jan/2009:13:25:52 -0800] cupsdReadClient: 7 GET /printers HTTP/1.1
D [03/Jan/2009:13:25:52 -0800] cupsdAuthorize: Authorized as root using Basic
D [03/Jan/2009:13:25:52 -0800] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 13597
I [03/Jan/2009:13:25:52 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13597)
D [03/Jan/2009:13:25:52 -0800] cupsdSendCommand: 7 file=8
D [03/Jan/2009:13:25:52 -0800] cupsdAcceptClient: 10 from localhost:631 (IPv4)
D [03/Jan/2009:13:25:52 -0800] cupsdReadClient: 10 POST / HTTP/1.1
D [03/Jan/2009:13:25:52 -0800] cupsdAuthorize: No authentication data provided.
D [03/Jan/2009:13:25:52 -0800] CUPS-Get-Default
D [03/Jan/2009:13:25:52 -0800] CUPS-Get-Default client-error-not-found: No default printer
D [03/Jan/2009:13:25:52 -0800] cupsdProcessIPPRequest: 10 status_code=406 (client-error-not-found)
D [03/Jan/2009:13:25:52 -0800] [CGI] show_all_printers(http=0x2409930, user="root")
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] cupsdReadClient: 10 POST / HTTP/1.1
D [03/Jan/2009:13:25:52 -0800] cupsdAuthorize: No authentication data provided.
D [03/Jan/2009:13:25:52 -0800] CUPS-Get-Printers
D [03/Jan/2009:13:25:52 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:52 -0800] cupsdCloseClient: 10
D [03/Jan/2009:13:25:52 -0800] PID 13597 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [03/Jan/2009:13:25:54 -0800] cupsdReadClient: 7 GET /printers/HL2040?op=print-test-page HTTP/1.1
D [03/Jan/2009:13:25:54 -0800] cupsdAuthorize: Authorized as root using Basic
D [03/Jan/2009:13:25:54 -0800] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 13598
I [03/Jan/2009:13:25:54 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13598)
D [03/Jan/2009:13:25:54 -0800] cupsdSendCommand: 7 file=8
D [03/Jan/2009:13:25:54 -0800] cupsdAcceptClient: 10 from localhost:631 (IPv4)
D [03/Jan/2009:13:25:54 -0800] cupsdReadClient: 10 POST /printers/HL2040 HTTP/1.1
D [03/Jan/2009:13:25:54 -0800] cupsdAuthorize: No authentication data provided.
D [03/Jan/2009:13:25:54 -0800] Print-Job ipp://localhost:631/printers/HL2040
D [03/Jan/2009:13:25:54 -0800] add_job: requesting-user-name="root"
D [03/Jan/2009:13:25:54 -0800] Adding default job-sheets values "none,none"...
I [03/Jan/2009:13:25:54 -0800] [Job 20] Adding start banner page "none".
D [03/Jan/2009:13:25:54 -0800] Discarding unused job-created event...
I [03/Jan/2009:13:25:54 -0800] [Job 20] Adding end banner page "none".
I [03/Jan/2009:13:25:54 -0800] [Job 20] File of type application/postscript queued by "root".
D [03/Jan/2009:13:25:54 -0800] [Job 20] hold_until=0
I [03/Jan/2009:13:25:54 -0800] [Job 20] Queued on "HL2040" by "root".
D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
D [03/Jan/2009:13:25:54 -0800] [Job 20] job-sheets=none,none
D [03/Jan/2009:13:25:54 -0800] [Job 20] banner_page = 0
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[0]="HL2040"
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[1]="20"
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[2]="root"
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[3]="Test Page"
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[4]="1"
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[5]="job-uuid=urn:uuid:a5b660c0-8a51-311a-57a0-7cfa046475b0"
D [03/Jan/2009:13:25:54 -0800] [Job 20] argv[6]="/var/spool/cups/d00020-001"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[9]="SERVER_ADMIN=root@uncle-bilbo"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[10]="SOFTWARE=CUPS/1.3.9"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[12]="USER=root"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[13]="CUPS_SERVER=localhost"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[14]="CUPS_ENCRYPTION=IfRequested"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[15]="IPP_PORT=631"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[16]="CHARSET=utf-8"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[17]="LANG=en_US.UTF8"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[18]="PPD=/etc/cups/ppd/HL2040.ppd"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[19]="RIP_MAX_CACHE=8m"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[20]="CONTENT_TYPE=application/postscript"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[21]="DEVICE_URI=usb://Brother/HL-2140%20series"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[22]="PRINTER=HL2040"
D [03/Jan/2009:13:25:54 -0800] [Job 20] envp[23]="FINAL_CONTENT_TYPE=printer/HL2040"
I [03/Jan/2009:13:25:54 -0800] [Job 20] Started filter /usr/lib/cups/filter/pstops (PID 13599)
I [03/Jan/2009:13:25:54 -0800] [Job 20] Started filter /usr/lib/cups/filter/brlpdwrapperHL2040 (PID 13600)
I [03/Jan/2009:13:25:54 -0800] [Job 20] Started backend /usr/lib/cups/backend/usb (PID 13601)
D [03/Jan/2009:13:25:54 -0800] Discarding unused job-state-changed event...
D [03/Jan/2009:13:25:54 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
D [03/Jan/2009:13:25:54 -0800] [Job 20] Printer using device file "/dev/usblp0"...
D [03/Jan/2009:13:25:54 -0800] [Job 20] backendRunLoop(print_fd=0, device_fd=5, use_bc=0, side_cb=0x4029f0)
D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
D [03/Jan/2009:13:25:54 -0800] [Job 20] Page = 595x842; 18,12 to 577,830
D [03/Jan/2009:13:25:54 -0800] [Job 20] slow_collate=0, slow_duplex=0, slow_order=0
D [03/Jan/2009:13:25:54 -0800] [Job 20] Before copy_comments - %!PS-Adobe-3.0
D [03/Jan/2009:13:25:54 -0800] [Job 20] %!PS-Adobe-3.0
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%BoundingBox: 0 0 612 792
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%Pages: 1
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%LanguageLevel: 1
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%DocumentData: Clean7Bit
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%DocumentSuppliedResources: procset testprint/1.3
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%Creator: Michael Sweet, Apple Inc.
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%CreationDate: D:20070606214000+0500
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%Title: Test Page
D [03/Jan/2009:13:25:54 -0800] [Job 20] %%EndComments
D [03/Jan/2009:13:25:54 -0800] [Job 20] Before copy_prolog - %%BeginProlog
D [03/Jan/2009:13:25:54 -0800] [Job 20] Before copy_setup - %%Page: 1 1
D [03/Jan/2009:13:25:54 -0800] [Job 20] Before page loop - %%Page: 1 1
D [03/Jan/2009:13:25:54 -0800] [Job 20] Copying page 1...
D [03/Jan/2009:13:25:54 -0800] [Job 20] pagew = 559.0, pagel = 818.0
D [03/Jan/2009:13:25:54 -0800] [Job 20] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [03/Jan/2009:13:25:54 -0800] [Job 20] PageLeft = 18.0, PageRight = 577.0
D [03/Jan/2009:13:25:54 -0800] [Job 20] PageTop = 830.0, PageBottom = 12.0
D [03/Jan/2009:13:25:54 -0800] [Job 20] PageWidth = 595.0, PageLength = 842.0
D [03/Jan/2009:13:25:54 -0800] [Job 20] Wrote 1 pages...
D [03/Jan/2009:13:25:54 -0800] PID 13599 (/usr/lib/cups/filter/pstops) exited with no errors.
D [03/Jan/2009:13:25:54 -0800] [Job 20] /usr/lib/cups/filter/brlpdwrapperHL2040: line 139: /usr/local/Brother/cupswrapper/brcupsconfig3: No such file or directory
D [03/Jan/2009:13:25:54 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:54 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:54 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:54 -0800] cupsdCloseClient: 10
D [03/Jan/2009:13:25:54 -0800] PID 13598 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [03/Jan/2009:13:25:54 -0800] [Job 20] /usr/local/Brother/lpd/filterHL2040: line 129: /usr/local/Brother/lpd/rawtobr2: No such file or directory
D [03/Jan/2009:13:25:54 -0800] [Job 20] GPL Ghostscript 8.63: Unrecoverable error, exit code 1
D [03/Jan/2009:13:25:54 -0800] PID 13601 (/usr/lib/cups/backend/usb) exited with no errors.
D [03/Jan/2009:13:25:54 -0800] PID 13600 (/usr/lib/cups/filter/brlpdwrapperHL2040) exited with no errors.
D [03/Jan/2009:13:25:54 -0800] [Job 20] File 0 is complete.
I [03/Jan/2009:13:25:54 -0800] [Job 20] Completed successfully.
D [03/Jan/2009:13:25:54 -0800] Discarding unused printer-state-changed event...
D [03/Jan/2009:13:25:54 -0800] Discarding unused job-completed event...
D [03/Jan/2009:13:25:55 -0800] [Job 20] Unloading...
D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 7 GET /printers/HL2040 HTTP/1.1
D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: Authorized as root using Basic
D [03/Jan/2009:13:25:56 -0800] [CGI] /usr/lib/cups/cgi-bin/printers.cgi started - PID = 13683
I [03/Jan/2009:13:25:56 -0800] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=13683)
D [03/Jan/2009:13:25:56 -0800] cupsdSendCommand: 7 file=8
D [03/Jan/2009:13:25:56 -0800] cupsdAcceptClient: 10 from localhost:631 (IPv4)
D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 10 POST / HTTP/1.1
D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: No authentication data provided.
D [03/Jan/2009:13:25:56 -0800] CUPS-Get-Default
D [03/Jan/2009:13:25:56 -0800] CUPS-Get-Default client-error-not-found: No default printer
D [03/Jan/2009:13:25:56 -0800] cupsdProcessIPPRequest: 10 status_code=406 (client-error-not-found)
D [03/Jan/2009:13:25:56 -0800] [CGI] show_printer(http=0x152e930, printer="HL2040")
D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 10 POST / HTTP/1.1
D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: No authentication data provided.
D [03/Jan/2009:13:25:56 -0800] Get-Printer-Attributes ipp://localhost/printers/HL2040
D [03/Jan/2009:13:25:56 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] cupsdReadClient: 10 POST / HTTP/1.1
D [03/Jan/2009:13:25:56 -0800] cupsdAuthorize: No authentication data provided.
D [03/Jan/2009:13:25:56 -0800] Get-Jobs ipp://localhost:631/printers/HL2040
D [03/Jan/2009:13:25:56 -0800] cupsdProcessIPPRequest: 10 status_code=0 (successful-ok)
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [03/Jan/2009:13:25:56 -0800] cupsdCloseClient: 10
D [03/Jan/2009:13:25:56 -0800] PID 13683 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
Cups config:
# "$Id: cupsd.conf,v 1.1 2006/07/06 13:11:10 tpowa Exp $"
# Sample configuration file for the Common UNIX Printing System (CUPS)
# scheduler. See "man cupsd.conf" for a complete description of this
# file.
# Disable ssl by default, you have to generate own certs to use this feature eg. by this command:
# openssl req -new -x509 -keyout /etc/cups/ssl/server.key -out /etc/cups/ssl/server.crt -days 365 -nodes
# for other certs please refer to openssl manpage.
# Setting Encryption to not required by default
DefaultEncryption IfRequested
# Log general information in error_log - change "info" to "debug" for
# troubleshooting...
LogLevel debug
# Administrator user group...
SystemGroup sys root
# Only listen for connections from the local machine.
Listen localhost:631
# Socket disabled by default it makes KDE fail on CUPS
# Listen /var/run/cups/cups.sock
# To allow remote connections add for example
# Listen <yourserverip>:631
# Show shared printers on the local network.
Browsing On
BrowseOrder allow,deny
BrowseAllow @LOCAL
# Default authentication type, when authentication is required...
DefaultAuthType basic
# Restrict access to the server...
# By default only localhost connections are possible
<Location />
Order allow,deny
Allow localhost
</Location>
# Restrict access to the admin pages...
<Location /admin>
# Encryption disabled by default
#Encryption Required
Order allow,deny
Allow localhost
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
AuthType Basic
Require user @SYSTEM
Order allow,deny
Allow localhost
</Location>
# Set the default printer/job policies...
<Policy default>
# Job-related operations must be done by the owner or an adminstrator...
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
# All administration operations require an adminstrator to authenticate...
<Limit Pause-Printer Resume-Printer Set-Printer-Attributes Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs CUPS-Reject-Jobs CUPS-Set-Default>
AuthType Basic
Require user @SYSTEM
Order deny,allow
</Limit>
# Only the owner or an administrator can cancel or authenticate a job...
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
# End of "$Id: cupsd.conf,v 1.1 2006/07/06 13:11:10 tpowa Exp $".
Last edited by hbarnwheeler (2009-01-03 23:36:53)Downloaded PPD file from here: http://www.profv.de/brother/
Then, when I went to print, I'd get an error about foomatic. I installed the following packages: foomatic-db, foomatic-db-engine, foomatic-filters and it worked. -
[SOLVED]Printer HP-PSC1315 does not work (Filter failed) w/ kernel 3.8
I moved to archlinux nearly a month ago. I liked it from the start. Finally a distro I could love. Back then the kernel version was 3.7.9. My old HP-PSC1315 printer worked flawless. Just installed and enabled cups, then installed hplip, ran hp-probe and hp-setup -i. But soon the kernel was updated to 3.8.3 and then to 3.8.4. Since that I keep getting the message "Filter failed" despite all my efforts. But the scanner works normally. It does not seem to be a problem caused by the updating of hplip or cups. It seems to be a compatibility problem with kernel 3.8, because when I downgrade to 3.7.9 the newest versions of hplip and cups work fine. The only way I found out to circumvent the problem is to print from a virtualbox machine where the [core] packages were installed from an old repository with kernel 3.7--a very annoying work around.
Could anyone help me, please?
Last edited by tenoriocalc (2013-04-12 23:57:53)Thanks for the advice. I agree it is hard to blame kernel 3.8 on that. But hplip 3.13.3, cups 1.6.2 and foomatic 1:4.0.17 have the same versions on both cases. Setting "cupsctl LogLevel=debug2" produces a very verbose /var/log/cups/error_log file. Below I have omitted most of it and select only what I think is most significant. Sorry for the long post.
d [30/Mar/2013:13:48:27 -0300] cupsdFinishProcess(pid=1749, name=0x7fff88f156c0, namelen=1024, job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/pstopdf"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1749 (/usr/lib/cups/filter/pstopdf) exited with no errors.
d [30/Mar/2013:13:48:27 -0300] cupsdFinishProcess(pid=1750, name=0x7fff88f156c0, namelen=1024, job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/pdftopdf"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1750 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [30/Mar/2013:13:48:27 -0300] [Job 18] Failed to send: org.freedesktop.ColorManager.NotFound:device id 'psc_1310' does not exists
D [30/Mar/2013:13:48:27 -0300] [Job 18] Failed to get profile filename!
I [30/Mar/2013:13:48:27 -0300] [Job 18] no profiles specified in PPD
D [30/Mar/2013:13:48:27 -0300] [Job 18] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -sMediaType=Plain -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsRowStep=1 -dcupsInteger0=2 -dcupsInteger1=3 -scupsPageSizeName=Letter -I/usr/share/cups/fonts -c -f -_
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
d [30/Mar/2013:13:48:27 -0300] select_timeout: JobHistoryUpdate=1364748446
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[8]="HOME=/var/spool/cups/tmp"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[10]="SERVER_ADMIN=root@ArchLinux"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[11]="SOFTWARE=CUPS/1.6.2"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[13]="USER=root"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[14]="CUPS_MAX_MESSAGE=2047"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[17]="IPP_PORT=631"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[18]="CHARSET=utf-8"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[19]="LANG=en_US.UTF-8"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[20]="PPD=/etc/cups/ppd/psc_1310.ppd"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[21]="RIP_MAX_CACHE=128m"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[22]="CONTENT_TYPE=application/postscript"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[23]="DEVICE_URI=hp:/usb/psc_1310_series?serial=BR57E3H0YGO2"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[24]="PRINTER_INFO="
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[25]="PRINTER_LOCATION="
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[26]="PRINTER=psc_1310"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[27]="PRINTER_STATE_REASONS=none"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[28]="CUPS_FILETYPE=document"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[29]="FINAL_CONTENT_TYPE=printer/psc_1310"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[30]="AUTH_INFO_REQUIRED=none"
d [30/Mar/2013:13:48:27 -0300] select_timeout: JobHistoryUpdate=1364748446
I [30/Mar/2013:13:48:27 -0300] [Job 18] Start rendering...
D [30/Mar/2013:13:48:27 -0300] [Job 18] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [30/Mar/2013:13:48:27 -0300] [Job 18] STATE: +connecting-to-device
D [30/Mar/2013:13:48:27 -0300] [Job 18] prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/psc_1310_series?serial=BR57E3H0YGO2
job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/backend/hp"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1753 (/usr/lib/cups/backend/hp) stopped with status 1.
job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/hpcups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1752 (/usr/lib/cups/filter/hpcups) did not catch or ignore signal 13.
d [30/Mar/2013:13:48:27 -0300] cupsdFinishProcess(pid=1751, name=0x7fff88f156c0, namelen=1024, job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/gstoraster"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1751 (/usr/lib/cups/filter/gstoraster) stopped with status 13.
d [30/Mar/2013:13:48:27 -0300] select_timeout: JobHistoryUpdate=1364748446
d [30/Mar/2013:13:48:27 -0300] finalize_job(job=0x7f1f9bd8d730(18))
d [30/Mar/2013:13:48:27 -0300] cupsdSetPrinterReasons(p=0x7f1f9bdb3740(psc_1310),s="-connecting-to-device,cups-remote-pending,cups-remote-pending-held,cups-remote-processing,cups-remote-stopped,cups-remote-canceled,cups-remote-aborted,cups-remote-completed"
d [30/Mar/2013:13:48:27 -0300] cupsdSetPrinterReasons(p=0x7f1f9bdb3740(psc_1310),s="-offline-report"
I [30/Mar/2013:13:48:27 -0300] [Job 18] Printer stopped due to backend errors; please consult the error_log file for details.
Last edited by tenoriocalc (2013-03-31 00:42:26)
Maybe you are looking for
-
Facebook connection error in Bridge CS6 - Windows 8.1
Good evening all! I have an HP Pavillion Laptop with and i5 and 12gigs RAM running Windows 8.1 CS6 Master Collection Action: Bridge / Export to Facebook From export panel select Facebook module. Select add present Select "Sign Into Facebook Error:"An
-
Mysterious Voice Mail Notification Won't Go Away
i've been having a single voice mail notifcation that refuses to go away no matter what. i have listened to all of my voice mails and it still has not gone away. i noticed that the notice is still shown in my hub as unread but whenever i try to sel
-
Reinstalling Acrobat 9 Pro from the CS4 discs
I tried reinstalling Acrobat 9 Pro from my CS4 discs but the installation gets stuck at the "Preparing to install window". Ive left my computer on for several hours but the program still hasent been installed. Whats causing this problem, what can I
-
How to send image as a part of message rather than as an attachment
Dear All, I have to configure one scheduler job to send html message containing image. I went through couple of posts in the same thread list and I could send email but in all approaches image is being sent as attachment. Can somebody guide on how to
-
Font disappears in Input Text field
Steps to recreate: 1. Create an input text field. Embed Characters. Set Font to Arial, Bold. 2. Create a static text field. Put some text in the field. Set Font to Arial, Regular, Anti-Alias for Readability. 3. Run out. Notice that Input Text field w