PRINTER PROBLEM ON THE NETWORK

I HAVE PRINTER HP2050dn installed on the network ,now its giving me problem from all network systems ,don't print ,i also connected directly to the system and install the software but still giving problem.

Try installing the printer via System preferences using this driver:
http://software.canon-europe.com/software/0025024.asp?model=

Similar Messages

How do I get my HP CM1415fmw printer to retain the network login information

A post on this forum suggested there might be a firmware update that would enable the printer to retain the network login information. Will that work, and if so, how would I do it? My current firmware version is 3/2011.

Please follow the instructions here in order and answer all questions in detail.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Is there problems with the network/signal in TA3 Taunton area

Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!

Changed wireless providers, now Wireless Printer is off the network

I recently switched wirless providers and the printer dropped off the network. I don't see a way through the printer itself to establish a new connection, and I can't connect it to my mackbook air through a USB and have any luck either. I reinstalled the disc and as soon as I select the option for a wireless printer in the setup, an "unexpected error" quits the process and I'm back to square one. How do I get the printer back on my new network? Thanks!

I appreciate the reply and understand needing every bit of information possible to increase the likelihood of a detailed answer. Going through everything I need to provide, however, will take me some time to find all the answers.
Is there just a short and simple way to reconnect a wireless printer to a new network? If it doesn't work, I understand it was a simple attempt and I'll get all the additional information like the kind of network, etc., but don't know all of that right now. It would seem reasonable that HP had a way to reconnect a wireless printer if you got a new network (or switched providers, etc.).
Thanks in advance!

The problem with the network card.

The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.

Pawełek wrote:
The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.
This confusing which one are you asking about?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

HT3500 Problems with iPad 3 connecting with HP wifi printer. Printer is on the network. Have downloaded HP EPrint, HP Printer Control. Am I missin something ? Suggestions?

iPad 3 is connected to my network. HP 3050A wifi printer is on wireless network (I can see ip address on printer screen). iPad does not see the printer. I have downloaded HP E-Print, HP Printer Control. What am I doin wrong?

Click the PrintCentral link that Tesserax provided for details about how to view the App in iTunes and download this from the App Store.
PrintCentral is not available from HP.

Can I use a USB Lead to connect PC with my Printer instead of the network connection?

I have recently moved my BT home Hub (wireless modem) from my study where it sat beside my printer, into the living room downstairs. So that it’s A, nearest to the BT access point (less loss) and B, it can connect directly to my TV, Blu-ray & BT Vision box. I have used a pair of Powerline adaptors to connect the home hub back to my HP PC and it’s all working very well with a faster broadband speed reaching my PC.
The only problem I now have is with my printer, which connects wirelessly to the home hub.
The printer is now right on the edge of the wireless range and really struggles to make a connection, sometimes failing altogether. The printer takes a long while to start up and sometimes fails to collect all of the data.
My real question is:
Can I simply connect my PC to the printer using a USB cable (USB A to USB B) and if I do, do I need to make any other changes to the way my PC connects with the printer?
Printer
HP Photosmart 6510e
PC
HP Pavilion HPE H8-1150UK
This question was solved.
View Solution.

No problem. Here's the link for the download for your operating system. Click Here When I sent my first post, I wasn't sure which operating system you were using.
Here's something you might try first before you do the download. You can leave the current drivers installed ( might come in handy if you decide to reconnect to the network ). Click on your Start button, and then select All Programs. Scroll down to the HP folder and open it. Then open the folder for the Photosmart 6510. Select Printer Setup and Software. You can go through the installation process as you did before, but this time you will choose usb connection.
Let me know what happens.
Good Luck !
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Need to print simultaneously via the network/TCP/IP & also print parallel from stand-alone PC

1. HP LaserJet 4200 Q2427A
2. Win7 - 32bit
3. When I print from the Networked PC (which is on same subnet as printer) Prints come out. No problems. Then I need to print from a PC( which is a standalone PC w/ no connection to the corporate LAN, but does have a separate DSL connection to the internet) connected via the parallel cable. Prints fine no problems. When I try to then go back to the networked PC and print, The job takes 10-15 minutes print if at all- which sometimes it does not print at all.
4. The stand-alone PC was replaced with a new windows 7 PC. The previous stand-alone PC was running windows XP. We did not experience any issues when PC was XP. PC was replaced due to Hard drive going bad and age. The windows 7 PC has a PCI parallel card installed for the parallel connection.
Have also tried using a parallel to usb adapter with same results.

That would be Wireless Distribution System (WDS). That is to say Wireless to Wireless. And if I recall correctly that option is not available to you.
Bridge Mode is bridging between ethernet and WiFi.
One way you could maybe do what you want without ethernet over powerline adaptors is to get an Airport Express (more money), attach that to the Pirelli via ethernet. Put the Express into Bridge Mode. Now have the Express provide the WDS server to the Airport Extreme Base Station. Of course you now have 3 WiFi transmiters in your home just so you can print something, but just think of the coverage in your home.
NOTE: If for some reason you decide to try this Express to AEBS WDS system, you can create a roaming network by giving all 3 WiFi systems the same SSID and password. When everyone is using the same SSID and password you can roam around the house and your laptops will automatically switch to the base station with the strongest signal (assuming that is worth something to you).

Secure printing problems with the dialog box

Hi!
Some one which has problem with the scure dialog box then using secure printing?
then we print in Adobe acrobat reader X 10.0.1 the dialog box for entring your pin nummer appearing under acrobat, causeing the program to locking until you go to the dialog box and clicking on it and enter the pin. The problem is that adobe not showing the dialog box in front of the printing overall dialog.
had nog problem with the old 9, it started then we uppgraded. Haw tride a nother driver but haw same issue. And all other programs works greate, word, notepat etc so it is just Adobe that has the problem.. ?
/J

Hi!
Its´s XP sp3 and the printer is a network printer(Toshiba e-studio 4520c) running a PCL6 driver.
Screen capture is not so much to see i think, running Swedish interface to. The ordinary dialogbox för printing is the first thing thats pops up, and then adobe reader frezes because the secund box pops up under adobe, you can click on it in the "toolbar" to continue. One thing that is diffrent when you print in adobe is that you can se on the "toolbar" for the popup box for the pin/password box is a Adobe icon on it. It is not so in example when printing in word, ie8 etc.
The problem is that many users dont see it and thinks the program has stopt working.
Im now going to try the PS driver from toshibas homepage..
thanks for help!

Lion: big problems with the network!

Since updating to Lion, I am experiencing difficulties with the network. My Kyocera task alfa 2500 cannot communicate properly with the Mac: it does print but cannot send scan to the Mac, it is just impossible for the printer/scanner to find the Mac. I hear it could be a problem with FTP which is not supported by the new OS Lion. How can I solve the problem?? Or is Apple going to resolve this problem????

Well, the problem relates to the Rosetta program eliminated by Apple in the Lion OS. When you try to rum the KM Scan to Mac.app you get:
"You can't open the application KM Scan to
Mac.app because PowerPC applications
are no longer supported."
So, I guess we (I encountered the same problem) will either have to wait out Kyocera-Mita for a scanner driver app, attempt write a new KM Scan to Mac.app for the Intel Macs; wait for somebody else to WRITE a new KM Scan to Mac.app for Intel Macs or just ***** about it.
Not a rosey situation.

Epson Stylus CX5400 printing rubbish over the network!!!

Hi! I am visiting my mom and dad for the holidays and they have an all-in-one Epson Stylus CX 5400 connected to their WinXP computer. Bonjour installed as well.
I have tried a few times to print some photos from iPhoto. I also tried printing an email from Apple's Mail. Everytime all I got was... nonsense basically. This kind of printout with unreadable characters.
I thought the lack of drivers for such a device installed in my PB should make no difference but anyway I tried installing them. I was right, the result was the same.
File sharing takes place without problem. As far as I know the drivers are up to date on both computers. If I connect the CX5400 directly to a PB's USB port it works great, but no otherwise.
Any thoughts?
Merry Christmas and happy 2006.
George...

Neither the PC nor the printer know what to do with the PostScript your Mac is sending. When the printer is attached directly to the Mac you use the printer's USB driver which speaks the printer's language, but when you send it over the network to the PC, you are using PostScript printing which the PC can't raster, and the printer doesn't understand. I don't think there is a solution here. I doubt there is a PostScript driver for that printer. You could install GhostScript on the PC, but that is very complicated and probably not worth it.

Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

The full message said:
There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later.
I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Cant buy from itunes store, message says there was a problem downloading - the network connection could not be made

recently changed my PC and successfully exported my itunes library. My problem is that when I now try to buy a song I get a message saying that there was a problem downloading (song) and that the network connection could not be made. Occasionally I get that the itunes store is temporarily unavailable and to try again later. The old PC was running Windows XP and the new one Windows Vista. I have already tried downloading a fresh version of itunes and ticked the repair option. Everything else appears to be working normally. Can anyone help please?

Still having trouble, the computer is authorized and appears normal in its function. Recently discovered that while it lists items I have purchased on another device it will not let me download to this computer and shows the same message as above. Also noticed that itunes says it is not connected to the internet which cannot be true because the list of previous purchases appears. Any help gratefully appreciated

Need help configuring VPN - problems accessing the networks

Hi everyone, hope someone can help me out here.
I'm administering the network for our small company. We basically have two sets of machines - public ones with fixed net addresses (mail, web, dns servers, etc), and private ones behind a wireless router/nat.
Our main need here is to be able to VPN in to the public side, in particular, the mailserver, so that we can get around all the stupid things that get done to SMTP when we connect at the BedBug Inn ("Free wifi, administered by gibbons").
Secondarily, it would be nice to be able to connect to and browse some of the internal machines.
So here is what I did:
* Installed 10.4.10 Server on a machine with two ethernet interfaces, one that has a public IP address, the other connects into the private network. When I'm actually at that machine, things work fine - I can browse the private network shares, connect to the net, etc.
* Configured VPN. I have no problems getting a VPN connection, both sides are happy. The VPN assigns incoming clients IP addresses in the private network IP range, but outside those assigned by the wireless router's NAT.
* Added 192.168.2.1/255 (the private network) and 12.17.29.193/224 (the public network) to the Network Routing Definition box under VPN/Settings/Client Information.
However, here's where it all falls down. Once the VPN is established, I can't connect to any of the public machines, and the only private-side device that seems to respond is the Wireless/NAT box (A Belkin N1). So the only thing I can do is administer the Belkin remotely, which, while nice, is not exactly what I had in mind.
Doing a traceroute while VPN is active to my mailserver shows the first hop direct to the VPN machine, then off into * * * heaven (though I have no idea if traceroute works over VPN!).
One curious note: when I change the order of the Network Routing Definitions so that the public network comes first, and the private one second, I can't contact the Belkin box.
Any advice, oh wise and powerful masters of technology?
Various, but the server is running on a G4 Mac OS X (10.4.10)

I said:
"let's assume I VPN to the wireless box"
You replied:
"That's not correct as it is not the device running the VPN endpoint - in this case. "
But wouldn't I have to (on the VPN client) specify the public IP of the wireless box in order connect (because the packets are forwarded) to the actual OS X box running the VPN? Otherwise, it can't see it.
Part of the problem I have is that I can't dedicate a whole machine to VPN. The OS X machine running VPN is also running DNS, and will eventually run our mailserver and perhaps FTP, web, etc, as I slowly migrate stuff to it.
So this machine has to have a public IP address. It cannot be hidden behind the wireless NAT. And it seems to me that this is the crux of the problem. What I think you are telling me is that if the VPN machine was entirely hidden behind the wireless NAT, and had no direct public (WAN) interface, then since all the packets destined for the outside world (including my public servers)would have to go through the NAT, and all would be OK.
If so, then it seems to me that the best solution is to use something like OpenVPN on another OS X (not OS X Server, since I only have one of those) machine in the private network. Since the incoming VPN traffic will be Mac only, it shouldn't be an issue, L2TP-only is fine.
"Otherwise you have to run NAT and the firewall in the VPN server too and use private IPs for VPN clients - or use "only" it (remove the other NAT box and put it on the LAN only). Using only one device for NAT/gw means less configuration."
It is entirely unclear to me, in my setup, what effect turning on NAT on the VPN box (or perhaps, just IP forwarding) would have -- and if I do turn on NAT, would I still have the VPN assign IP's to clients in the internal private network's range, or would I use a different range (ie: private is 192.168.237.xxx, VPN assigns 192.168.239.xxx) and expect the NAT to handle the conversion?
I'm a bit leery of just trying it and seeing what happens because it if mucks things up so badly that the server becomes unreachable (via server admin), I'll have to schlep down to the office to fix it.
"Other things to consider is "bottlenecks" between your LAN and WAN."
Not a real issue. We have a small office, and a relatively small pipe to the internet. Most of the traffic from that pipe is from the public machines anyway. The traffic that goes through the wireless router is basically websurfing and hitting the mailserver.
I could, of course, use the VPN OS X machine as the NAT/DHCP server, and hang the wireless router off the internal network as a simple access point. But would that resolve all the VPN issues?
Once again, thanks for your helpful and prompt replies.

PRINTER PROBLEM ON THE NETWORK

Similar Messages

Maybe you are looking for