Printer setting for Cheque

Dear All,
I am facing problem while doing Cheque Printing. or (document having definite length). Cheque printing is done on Epson printer.
For Particular Cheque printing I created Page Format Under "Dev. type" SAPWIN     "Rel.4.x/SAPlpd 4.09+ ONLY!".
Page Format Description is:
Format            Ty.    Format               P   L     Lines     Columns    Comment
ZZCHEQUK     S      ZZCHEQUK        X
Format         P L Width            Height
ZZCHEQUK X      00205     MM 00093     MM
Paper Size set on this printer is A4. But client can able to Print in same size & on same printer from there previous software.
Is it required to set particular Height on each & every printer for definite use.
Pl suggest me how to to resolve this issue.
Thanks,
Abhay

Hi Abhay,
Question is not clear like how you are getting out put, so far my understanding from your query, you need to set up both the <i>Device Types</i> and <i>Page Formats</i> from SPAD Tcode.
Ex: page length and width
SPAD -> Device Types
Select the Device type and go to Formats
Select the Printer initilization
Change No of lines and Hex Values.
Page Format is the same like what you defined

Similar Messages

Why do my applications quit when I enter the printer setting for my Epson 10600

why do my applications quit when I enter the printer setting for my Epson 10600

Which Mac and OS do you have?

Needs steps for Printer setting for User-customized Paper Size

Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
Ravi

Hi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari

Print preview for cheque print

hi experts,
How to see the print preveiw for f-58 tcode.

Hello Priyanka,
When you complete the transaction F-58, go to transaction code FBZ5 and give the document number which you generate using F-58.
Please take help from your FI consultant for better result or post the same thread in SAP fi forum.
Hope this helps.
Cheers,
Suvi

Default Printer setting for 2600n causing spinning flashing cirlce cursor in MS Word 2007

Printer drivers for HP2600n are causing spinning and blinking curor in MS Word 2007. I couldn't print in IE9 due to script errors. HP Help said to uninstall and reinstall printer. After reinstalling, I can print in IE9, but now MSWord 2007 has a blinking, spinning, flashing circle on top of the curor. It's maddening and I can't edit. I've run all the "fixes" for MS and Word to no avail.
I've scoured the web to find it's the "default printer" causing the problems. I had to delect the HP as default, and then the spinning circle goes away. But... when I manually select the HP to print within a Word doc, it re-activites the crazy cursor and I must close the doc.
I'm using 32bit Vista, Windows Office 2007, IE9, HP 2600n
Do you have a fix or a patch? Many thanks to a kind person for a solution!

Printer drivers for HP2600n are causing spinning and blinking curor in MS Word 2007. I couldn't print in IE9 due to script errors. HP Help said to uninstall and reinstall printer. After reinstalling, I can print in IE9, but now MSWord 2007 has a blinking, spinning, flashing circle on top of the curor. It's maddening and I can't edit. I've run all the "fixes" for MS and Word to no avail.
I've scoured the web to find it's the "default printer" causing the problems. I had to delect the HP as default, and then the spinning circle goes away. But... when I manually select the HP to print within a Word doc, it re-activites the crazy cursor and I must close the doc.
I'm using 32bit Vista, Windows Office 2007, IE9, HP 2600n
Do you have a fix or a patch? Many thanks to a kind person for a solution!

Printer setting for Billing

May i know how can I check printer device setting, if let say in printing invoice - VF31, different output type that print from different region will have its own printer set? Setting in user profile (SU01) doesnt have affect on this.
Thanks

Hi,
Use transaction SPAD.
Reward if useful!

Default printer setting for users

Hi,
We have a requirement.
User wants to get the print out at his own desk.
Can we set up like the print out should go to the printer assigned to perticular user who execute the transaction.
If user X is assigned to printer 123. and Y is to 456. the printer should default when he trying to process output (Logical destination). I tried maintaining Output type print parameters as USER PARAMETERS. and a printer is assigned to users own data SU3. but still system is asking for output device to assign while processing.
Thanks,
Anand K

O/P is ZF12 and it is for printing Shippment TAG, in T code VT01N.
But i feel the solution might be general not specific to output type. any way it is not a standard form.
Can we create new condition record using Output device from SU3.
If it is possible also is there any other method to achieve this.
Thank you,
Anand K

Printer setting for teslin paper

Hi
I printed on some normal paper and then some teslin paper
The quality of the print on teslin paper was not as grate to that of standard paper
And also little chunks of print where missing on the teslin paper
In the 'page setup' options for 'properties' there is a drop down box called 'media type' and its set to 'plain paper' as default
There are quite a few options from the drop down box one of them called 'glossy photo paper'
I dont want to print on them all (all of the options) as I dont have a lot of teslin paper
Can someone advice on the best option please
Thanks
Batista230

Hi Batista230,
I've printed on Teslin® Substrate before and I've had no issues. Please let me help you with this.
May I know what type of printer are you using? (i.e. inkjet, laser etc.)
Also, I heard that some ppl out there are selling substandard materials of Teslin. Any possibility that you obtained not the good grade?
Cheers.
Pat

Printer Setting for Printing

HI All,
i Dont know this is correct way or not to ask this Question
I have Developed a SAP Script and that have 4 pages for example
i need that pages print
but now my Doubt is , if we have a big printer and that have 3 or 4 tray for pinting in this case from our Script first page is from one tray and second page is from some other tray like that need tp print
is that possible ???
if possible that is ABAP work or BASIS settings????
Please Help Me
Thanks
Surendra P

Hi ,
It is possible in you SAP-script only to assign any specific page to a printer tray. Pls check following:
1. In your SAP-Script goto you Pages. Now double click on your FIRST PAGE.
2. Now at the bottom of the screen there is Print Attributes options. Specify your TRAY Name or Number to that Resource Name and keep your printing mode as you like.
3. Similarly you do for your next page. Same as above. Just keep your TRAY name as you want.
It will help you.
Regs,
Lokesh
Edited by: Lokesh Tarey on Mar 26, 2010 8:09 AM

Double sided printing setting for brother HL-2130

Hi, i'm having problem to enable doule sided printing with my Brother HL-2130 printer. I'm having macbook air with MAC OS 10.9 and the driver is brother 4.0.5 HL-2130. Any body have the same problem? I'm really appreciating any helps. Thank you.

Hello,
Yes. Print setup . Ask the user to maintain in his login and ask him to print.
In print setup , there is a option print front and back
Thanks
RK

Printer setting for TO

Hi,
Print to be made automatically after TO has been created in T.Code LB13.
The print to be given to the default printer.
Kindly inform me the steps.
Regards,
Vengat

Have you looked at transaction OMLV - Print control?

How to create an custom template for cheque printing layout?

Hi, I have a question about cheque printing format set up in SAP Business One.
All the the system standard templates in u201CCheque print lay out designeru201Dare u201Ccheque-stub-stubu201D or u201Cstub-cheque-stubu201D or u201Cstub-stub-chequeu201D (three portions). What I need is u201Ccheque-stubu201D （two portions）only. Anyone knows how to create an custom template?
Thanks.
Edited by: Angela Zhang on Jan 17, 2010 7:18 AM
Edited by: Angela Zhang on Jan 17, 2010 7:18 AM

Hi Angela,
Check the thread,
Re: Preprint AP check - stub/check repetitive area fram size
CHECK PRINTING
Re: check/cheque for payment printing posting date on stub
PLD Check-Stub-Stub
PLD Check
PLD Multiple Check printing
Regards,
Madhan.

Where did all the setting for printing go in PSE8-Mac?!

OK, I'm probably missing some obvious settings somewhere, please tell me after you read my rantings...
I'm using the 'Full Edit' mode, assuming that is important. But the new Print Dialog looks like it has been dumbed down for some one, not sure who, however has it has me completely confused. There are now only three 'steps' for printing. One and two are self explanatory. However...
Step three concerns paper size, image size and several other details. Just for testing, I created a new 4 x 6 inch, 300dpi page and drew some lines. Command-P. Proper printer is selected, select "Letter" as the paper size. 4 x 6 inch appears selected as the "Print size" (I thought that was because of the original page size, but it appears to simply be the default). That is a detail that could easily be over looked by a new user. If the original image is larger than 4 x 6, it will, obviously be either cropped or reduced to fit those dimensions! It seems to me that the "Select Print Size" should automatically assume to be the image size. OTOH, I can see that some people may want to do all their printing on one size of paper. In that case, why not have a preference for the default and let the user change it when they change paper sizes (if they want)?
Now, if the user happens to notice that a new 8 x 10 inch image is going to be printed in a 4 x 6 area, she will now decide to check the other settings available in the pop up menu. OK, there IS an 8 x 10 inch choice. But look, what's this "Custom" choice? Let's investigate...Now this is strange! The defaults there seem to be 1.383 inches for height AND width! Who came up with that weird number?!
Oh, there is a "Scale to Fit Media" check box. Checking that now makes the height and width somewhat closer to reality, they now indicate the pape dimensions. That IS logical, but not extremely helpful, IMHO. By the way, the second time one selects the "Custom" choice, the correct, original image size appeared in the Print size boxes. Although I cannot seem to get those to reappear. Oh well...
My point is, how do these confusing configurations help? Beyond me, anyway.
BTW, the dpi settings all seem to be 'computed' at one less than the number set by the user for an image. For example, a new image page created at 300 dpi shows 299 in the Custom dialog, 150 shows 149, etc. Close, but why not exact? Furthermore, why can't the user select any dpi they choose? Isn't that what the computer if for; calculate what happens to the pixels when they print at a different setting than the image? Sure, the user should be warned that terrible images my result, but if that's what the user wants, let it be done! Who's running this show, anyway? Oh yeah, I remember, now...excuse me for asking, I'm only a paying customer, what do I know?!
Lastly, if one has more than one image open, every single one can easily be printed, accidentally. Why? Because they will all appear in the Print Dialog. Don't you see them? Over there on the left. Yeah, I see them, but why doesn't the image I have in front, the one I'm working on, be the one I probably want to print? Many of the others may simply be images I'm borrowing parts from. Why do the developers think I always want to print every image that might be open? I don't have any idea, either. Sure, there are a couple of ways to prevent this multiple image printing; select the one you don't want to print and use the "minus" button or simply close all those images before going to the Print dialog. Guess what. Using the 'minus' button only works for this printing, the next time you ask to print they will all be there, again. And, what if you aren't really finished using some of those extra images that you closed? Now you get to re-open them all again. Completely unnecessary steps because of poor user considerations/research, in my humble opinion. Again, this is exactly the thing that preferences are made for. Or, put them in the "Edit Guided" mode! Or, better yet, just give me back the old Print dialog! Nice!
Now, I am extremely glad to see that PSE can now remember to keep that stupid Panel bin out of the way! Finally! Three more inches of screen to work with!!! Hooray!! Unfortunately, it still can't remember what the last setting for the jpeg quality was...still defaults to ZERO! Sure, that's the setting I always want to use, it's so much fun letting people try to guess what is in the image...one would think after 8 iterations this could be fixed. One down, umpteen to go. Oh well, what do you want for $80?

Thanks for your listening/reading and I'll take your advice about dropping a note to the developers, but I won't be holding by breath! I doubt that they consider this a real problem. It's really just my ranting!
Your solution is probably the 'fix' they might suggest, anyway. However, I'd rather have the screen space than a list of thumbnails of images I already have open. command-plus and/or minus is a pretty quick way of making it easy to see anything that might be visible. Of course, I'm sure there are other uses for the Project Bin that many find useful. Even though I have a 24" iMac, I rather like using the screen space the way I want, not an arbitrary way that got developed. I just don't see why developers can't program an app to allow every conceivable method of use by every living and future user! LOL!!!
I guess today was the first time I've printed anything since installing 8. I was, quite confused when presented with the new Print interface. Actually, I thought that must be part of the 'Guided' set up which I assume leads one by the hand as much as possible. "Thank you Adobe, but I'm trying to avoid unnecessary contact with strangers right now." LOL! At least I know I didn't miss some setting somewhere.
Thanks! Have a great weekend! And don't get scared too much tonight!

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

How to print Spool requests for cheque printing sequentially

Dear All,
I am making vendor payments and printing cheques using F-58. It automatically creates a spool requests at the end of the transaction. When i complete all my payments and go to SP01 for viewing spool requests, the last request appears at the top of the list.
If i select 3 consecutive requests and print them at a time, the last request gets printed first on the first cheque number and the first request gets printed on the last cheque number.
This results in anomaly in the cheque number assigned in the system and the printed cheque as the last payment is printed on the first cheque.
I am using dot matrix printer with page format fixed for cheque specifications. The cheques are printed properly as per the format except the order of printing.
Kindly let me know how to print multiple requests sequentially from the spool requests list such that the spool request number printed matches with the serial cheque numbers.
Regards,
SAP_2009

Hi,
I understod your issue.
Whenever you posted multiple payment documents, and after that if you want to take cheque printouts sequentially by using more spool requests.........there is a way to sort out this issue.
1) Select all of your spool requests and click on Sort in ascending Order (CtrlShiftF5) and click on Print directly (CtrlShiftF8). By doing this you will get the cheque printouts sequentially according to your payment document sequence.
Hope this will help you
Assign ********, if it solved your problem.
Thanks,
Srinu

Printer setting for Cheque

Similar Messages

Maybe you are looking for