Printer wont turn off, and the touch screen is black.
I can not get my printer to turn off. The green power button will just stay on. I tried unplugging it, but as soon as I plugg it back in the power button will still be on. My touch screen also won't work. It just stays black.
Hi @Makayla1 , and welcome to the HP Forums!
I see you're having touchscreen and power issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
I'd suggest performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend plugging the printer power into a different wall outlet.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.
Similar Messages
-
Help! My ipad wont turn off and wont open a screen. Just blank with the circle going round and around. was I hacked? Should I let the battery die? I am lame at this stuff.
Have you tried holding down the power and the home buttons until the slider bar shows up to shut down the iPad?
-
My iPhone's flash wont turn off and the Power button is not working
Ealier today, my iPhone got wet from the rain, my camera started to malfuction and the flash or the LED light stayed on throughout the whole afternoon. I couldn't turn it off and it just ran out of battery.
If your power button is broken, there's not much you can do. You could go to an Apple store & do an out of warranty exchange...Apple doesn't fix iPhones, they replace them. But, I wouldn't recommend doing so, as the iPhone 3G was discontinued almost three years ago & won't run most apps in the app store.
You'd be better served by selling it for parts & using the money to purchase a new phone. -
I was using my 3G ipod touch and i slid the power off button to turn it off and the loading screen before it shuts off wont allow my ipod to turn off. i cant do anything because my ipod has the loading screen still on it. HELP!!
Try a hard reset. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. Then try shutting your iPod off again.
B-rock -
My daughters iPod wont turn off and has a blank white screen. i tried to restore it to the original state and it is still the same. is this fixable? thank you for your help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
what to do my ipod touch 4g is updated to ios6 now it has a white scren and wont turn off and to top it off the homebutton does not work at all please help me
Try:
- iOS: Not responding or does not turn on
-When it says place the iPod in recovery mode use this program instead of the buttons.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?
Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice. -
My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together
You have a hardware problem and you should take it into a apple store to be looked at and fixed.
-
while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?
Try here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain. Then charge for an hour and try again. -
my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?
I've tried that. It doesn't work. The only thing that happens is the apple comes up. I've tried holding the home as I'm plugging it in and keeping it held for a few minutes, but nothing happens. My iTunes doesn't even read that it's connected.
-
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help
My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses
roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> -
what should i do if my ipod turned off and the batterie isn't dead and my computer wont respond when i plug my ipod in
hey there...i have the same issue i turned off my ipod and not i cannot start the unit again. I bought this in Dec and know for sure my batterie is good....please help......
-
Apple should make a macBook where the screen can turn around and become touch screen, for easier use. especially for when i go to uni
Why touch and swivel screens arent a good idea on a laptop:
The so-called Gorilla arm: Gorilla arm is a term describing the tired arms users get after reaching out and touching a screen for a long time.
Added thickness: Touch screen panels are usually thicker than non-touch ones—especially if the touch panel has an active digitizer for pen support.
Possibly shorter battery life: Touch screens require more power. Laptop Magazine compared a couple of touch screen laptops with their non-touch counterparts (same model and size) and found that the non-touch laptops lasted over an hour longer.
Easy to break: Swivel screens are notoriously prone to break, especially the hinge and the cable that feeds the screen from the logic board which is being constantly twisted.
And thats what the Ipad is for. -
When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver. Any suggestions?
I have the exact same problem/situation since a few days
I have not intalled a program lately.
Any progress Voratima??
Software Mac OS X Lion 10.7.5 (11G63)
Maybe you are looking for
-
Install multiple version of SQL Server on a same machine, both with default instance?
We have an almost idle server (windows server 2008 R2) with SQL Server 2008 Enterprise with default instance. We would like to port all the data, install SQL Server 2012 developer edition and use it as testing server. Is that possible we still choose
-
Bank Reconciliation Report SAP B1 2005 or 2007 versions
Any progress made here ? Needs to have cashbook balance, list of unreconciled transactions and a bank statement balance. Can provide an example if needed. Interesting the Banking section has been revamped in 2007 version without such a standard repor
-
If I update from IOS 5.0.1 to 5.1.1 will I lose all my GPSHD Motion X map data? When I updated to IOS 5.0.1 I lost about 25GBytes of map data because Itunes will not back up my GPSHD map data.
-
SInce uploading ios7 on my ipad 2 using verizon fios service my response time surfing the web acts as if I am using a modem. Any ideas how i can fix this??
-
N95 RM-159 V 20.0.015 Pictures quality [HELP].
After upgrade firmware in my N95 pictures looks realy bad now. Before everything was ok. Can someone tell me why? What I done wrong? Can I put old firmware in to my phone?Message Edited by adam_wlkp on 03-Dec-200702:49 AM