Printfab 2.0.4 and 10.4.8 (Client & Server)

Hello
In another thread http://discussions.apple.com/thread.jspa?messageID=2223082" I mentioned that I wasn't able to get PrintFab Software running with the Server 10.3.9
Now I tried it again with 10.4.8. No output. You see the client transmit the data put nothing comes out of the printer.
I did some other testing. I installed the Canon i9950 as USB printer directly on a client Mac and activate the PrinterShare of the normal OS X. Then on antother Client I configure the PrintFab driver and everything print smootly.
Why can I share PrintFab on an normal OS X but not use it on a OS X Server?
I am able to share the normal Canon Printer Driver and print from another Canon Client over the Server, but the PrintFab doesn't work
PrintFab is a Postscript RIP for mostly all Inkjet Printer to make Proofs in RGB or CMYK. It is very populair here in Europe (http://www.printfab.com/)
Who is able to help me?

Mac OS X uses cups as its printing system base architecture.
On OS X Client system printer sharing is done with the cups builtin ipp printer sharing.
On OS X Server, since 10.4 configurable per GUI, you can share printers with ipp. But you have the added options of sharing printers through lpr and appletalk.
So my question is: how are you sharing the printer? It can only work with ipp sharing.
-Ralph

Similar Messages

HOW! Macbook + Macbook Pro And A WGPS606 Netgear Print Server

Hi there, having a spot of bother, lol
I have a pc laptop and 2 mac laptops.
set the print server up with pc laptop, and it works a treat, no problems! thou i did conenct 1printer and its in port 2, but following the instructions on the web i changed everything where necessary and pc lappy works a treat.
Now the macs.
1stly i installed the printer to work with a usb lead and it works on them both fine.
Then
I followed the instructions available from http://kbserver.netgear.com/kbwebfiles/N101570.asp
and when i get to select the printer type and model, the one i'm wanting to setup isnt listed, even thou its installed, and when you use the autodetect it comes up with a generic somet or other that doesnt work.
How do i get my printer listed or where do i find the file containing the driver info?
Ive seen a few of these problems crop up, but never the answers,
any help would be greatly apreciated!
Mark

Do you have a postscript printer? - otherwise this is going to be a two-step problem.
Driver - Only CUPS drivers can use OS X's built-in network printing protocols. (postscript printers don't need a driver, just a PPD) Of all the non-postscript manufacturers, only Brother is making CUPS drivers available at this time. (Apple included Gimp-Print drivers because they are CUPS drivers - a limited number of printers are supported)
For the others, you need a third-party CUPS driver from these sources:
http://www.linuxprinting.org/macosx/
http://www.printfab.net/
http:/www.easysw.com/printpro/
Next - print server setup. Since the Windows setup software doesn't work on OS X, we need to find the setup details ourselves. Your print server probably supports a couple of protocols- LPD, maybe IPP, and HP Jetdirect (called TCP/IP raw in most manuals). LPD and IPP require that you enter the print server's queue name in Printer Setup. Find the Queue name in the manual. L1, P1 and lp are common queue names.
Good luck.

Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on sam

Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on same NT box.
1) I attempted to install 8.1.6 client first in c:\oracle\ora81, then Forms 6 in c:\oracle\forms6. The installer (3.3.1.2.4) errors, saying forms 6 does not support a multi-home installation.
2) Attmpted to install Forms 6 first in c:\orant. Then installed 8.1.6 client in c:\oracle\ora81. After beginning installation (application user) the following Dependency message displays and the installation is canceled: "Installation cannot continue for the follwoing reason(s). [Oracle ODBC Driver is a single Oracle home product. It is already installed in location c:\oracle\ora81. Oracle provider for OLE DB is a single oracle home product. It is already installed in location c:\oracle\ora81. Oracle objects for OLE is a .... Pracle Provider for OLE is a single home ... You can either de-install these products or install the products in the same location as the single home products."
Click ok and the installation cancels.
How do I install these two products on the same box?

We had to upgrade from 7.3.2 to 7.3.4 when we moved over to Forms
6.0.5.0.2 and it's working fine.
We are using Net 8 as well.
Finn Ellebaek Nielsen (ChangeGroup ApS) (guest) wrote:
: I have problems with Forms 6.0.5.0.2 running against an Oracle
: 7.3.4 with Net8. When trying to insert or update records I get
: an FRM-40508: ORACLE error: unable to INSERT record/FRM-40509:
: ORACLE error: unable to UPDATE record. The Help | Display Error
: menu item shows statement = "S3AVWU3wo|$6o|" (garbled
: message), error = "ORA-12663: Services required by client not
: available on the server" (sometimes it's "ORA-01403: no data
: found").
: It works fine against 8.0.5. As far as I'm aware Forms 6 is
: certified against 7.3.4?
: Any clues?
: Thanks for your help.
: Finn
null

Settings and usage of external FTP Server in ECC 6.0

Dear all,
I work in ECC 6.0, and I want to configure and use an external FTP Server for upload, download and delete file from FTP Server.
My questions are:
1) Which are steps for configure an FTP connection?
2) How can I read, delete and send a flat file to the FTP Server? Can you send a sample code?
Thanks in advance for your help.
Best Regards,
Giulio

Please check program RSFTP002 is a good example given by SAP .
a®

VPN Site-to-Site or VPN Client Server with Cisco IP Phone 8941 and 8945

Hi everyone,
I decide to deploy a CUCM (BE6K platform), SX20, and IP Phone 8941/8945 on Head Office and Cisco SX10 and IP Phone 8941/8945 for branch offices (actually 9 branch offices).
The connection will use internet connection for HO and each branch offices.
And the IT guy want to use kind a VPN client server or VPN site-to-site for the connection through internet,
what kind of VPN client server or VPN site-to-site that recommended for this deployment?
and what type of Cisco router that support that kind of VPN (the cheapest one will be great)?
So the SX10 and IP Phone 8941/8945 in branch offices can work properly through internet connection?
please advise
Regards,
Ovindo

Hi Leo,
technically, the ipsec users will not use up any premium license seats, so if you have 10 ipsec users connecting first, the premium seats are still free and so you can then still have 10 phones/anyconnect users connect.
However, the 250 you mention is the global platform limit, so it refers to the sum of premium and non-premium connections. Or in other words, you can have 240 ipsec users and 10 phones, but not 250 ipsec users and 10 phones.
If 250 ipsec users and 10 phones would try to connect, it would be first-in, first-served, e.g. you could have 248 ipsec users and 2 phones connected.
Note: since you have Essentials disabled I'm assuming you are referring to the legacy "Cisco vpnclient" (IKEv1 client) which does not require any license on the ASA. But for the benefit of others reading this thread: if you do have Anyconnect clients (using SSL or IPsec/IKEv2) for which you currently have an Essentials license, then note that the Essentials and Premium license cannot co-exist. So for e.g. 240 Anyconnect users and no phones, you can use Essentials. For 240 Anyconnect users and 10 phones, you need a 250-seat Premium license (and a vpn phone license).
hth
Herbert

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

How to set up loopback# as source fro NTP and/or built-in DNS server ?

I have created a loopback# interface which I would like to be used as the router source interface for the NTP client and/or built-in DNS server so everything originating whithin the router has only one and unique IP address (such as: logging source-interface Loopback#)
The documentation explains how to create virtual interfaces but I cannot find how to associate them to the mentioned services except logging.
IOS is 12.4.15T.9

For DNS, maybe this would do the trick:
! (from DNS view configuration mode)
dns forwarding source-interface [Vlan10]

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity

Re-encode and send to Flash Media Server?

Hi all,
I hope this is not a basic question - I'm in a bit of a loop
with this.
I need to do two things:
grab a live video feed from a
professional DV camera - the feed would be a standard BNC
(composite) video cable + XLR mic cable or similar. I need to take
that feed and somehow convert it to feed and broadcast live through
Flash Interactive Streaming server (...a reliable hardware solution
would be great!)
I will also be receiving Windows
Media MMS feeds from our parent company - can I re-encode live and
send through Flash Streaming Server in real-time?
Also - just in case it makes a difference, the camera is PAL
- not NTSC. So far I've had no problem running tests with a camera
connected directly via firewire.
Thank you for any help you can offer.

My first message got screwed up - so trying again.....
Hi all, I hope this is not a basic question - I'm in a bit of
a loop with this.
I need to do two things:
1. grab a live video feed from a professional DV camera - the
feed would be a standard BNC (composite) video cable + XLR mic
cable or similar. I need to take that feed and somehow convert it
to feed and broadcast live through Flash Interactive Streaming
server (...a reliable hardware solution would be great!)
2. I will also be receiving Windows Media MMS feeds from our
parent company - can I re-encode live and send through Flash
Streaming Server in real-time?
Also - just in case it makes a difference, the camera is PAL
- not NTSC. So far I've had no problem running tests with a camera
connected directly via firewire.
Thank you for any help you can offer.

How to manage one wsp and dll for multiple clients in farm environment

1. There is a product which is developed using C sharp , jquery,CSS and sharepoint object models which have been packaged into .wsp file. Whenever we introduce new functionality to the product we used to branch the
previous code as a version , say Version 1.0 and new functionality of the product will in another solution. This is how we are managing the code in TFS as versions. Each newer version will have new functionalities. We do not give latest functionality for all
the clients. Each client is having its own version of functionality. Technically in order to access the functionality, the wsp solution should be present in the solution repository which is available in SharePoint central administrator site. This solution
will be deployed on the client’s site. We are following the above process in SharePoint standalone installation where we used to purchase dedicated server per client and installed sql, SharePoint foundation 2010 as standalone installation and adding the client
related version of the code to the solution repository. Later host on the site which is created for that client purpose. This process is same for all the clients where we purchase individual server for each client .
Now we want to host our product in farm environment of sharepoint foundation 2010 where we are going to try 3 level architecture.
• SQL Server-In this sever we are going to install sql server 2008R2 standard edition. Which should serve the database service for all the web applications/sitecollections which we are going to create in Web front end server.
• Application server- In this server we are going to install the sharepoint as farm and will install search server express for serving search functionality for our product
• Web front end server- In this server we are going to add this server to Sharepoint farm which we have created in application server. Here we are going to create web applications and site collections for all the clients.
In this scenario how to manage multiple versions of same wsp solution?
Another major issue w.r.t the architecture of the product and new approach for client deployment as follow.We have CSS, jquery files for serving the functionality.These files have been mapped to 14 hive folder.If any changes we do one of the jquery file or
css file which is meant for latest version and not for old version, then how to manage this new functionality for that particular css or jquery file in 14 hive folder, since there is only one 14 hive folder. What is the best practice to make this happen? Another
thing is, how to manage dll files for individual client?

It sounds like you have a farm scoped solution at work. In that case you can only have a single instance of it per farm, you'd have to branch each version so they appear to be seperate solutions entirely (thus ruining your clients upgrade process).
Bluntly i don't think a single farm can manage all your user environments.

How can I remove the SCCM 2012 client and reinstall SCCM 2007 client on all of our computers

Hello All
We have bit of a problem. Our virtual SCCM 2012 r2 server was deleted and the back solution we had in place keeps failing.
We do have our sccm 2007 server still in place but its only role was imaging as we transferred roles from one to another.
My question is now our support needs to remote into pcs but cant because the CM12 server is gone. How can I remove the 2012 client from all of our companies computers and reinstall the CM07 client so we can remote into computers again.
Thanks in advance!
Phil
Phil Balderos

Run a ccmsetup /uninstall on the clients. You may need to run via PSExec. Then push out the SCCM 2007 client via the 2k7 console.
Cheers
Paul | sccmentor.wordpress.com
Thanks Paul!
I have to do this on over 350 computers and 110 servers. How can I do it on a more massive scale?
Phil Balderos
I would check Torsten's approach first and see if the ccmsetup will uninstall the 2012 version. I'm not sure. Obviously the other way round is fine.
Using PSexec you can script this to call up a txt file of all your servers/computers and run the uninstall.
e.g.
for /f "tokens=*" %a in (computers.txt) do psexec \\%a %WINDIR%\ccmsetup\ccmsetup.exe /uninstall
If your account has privileges on all devices you won't need to add in any username/password credentials. Obviously only devices that are switched on and you have access to will run this.
Cheers
Paul | sccmentor.wordpress.com

How to get rid of automatically created Mail and iCal accounts on client?

I have recently setup an OS X 10.6 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (now upgraded to 10.6.4).
The problem is that one of the OS X 10.6.4 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?

I have the same problem. Every time that I open iCal on the client a new account is created and an error message shown that I cannot login. I can delete the wrong account in the iCal preferences. However, as soon as I restart, the account and the error message are back.
How do I "unbind" and "rebind" a client? I searched the "Mac OS X Server
Open Directory Administration Version 10.6 Snow Leopard" but the only reference to "binding" seems to be in the context of Active Directory which I don't have.
Any help is greatly appreciated.

Hot to get rid of automatically created Mail and iCal accounts on client?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?

I have the same problem. Every time that I open iCal on the client a new account is created and an error message shown that I cannot login. I can delete the wrong account in the iCal preferences. However, as soon as I restart, the account and the error message are back.
How do I "unbind" and "rebind" a client? I searched the "Mac OS X Server
Open Directory Administration Version 10.6 Snow Leopard" but the only reference to "binding" seems to be in the context of Active Directory which I don't have.
Any help is greatly appreciated.

How to check if a socket is still alive and not closed by the server?

If I create a socket connection in Java, then is there any way to test whether that socket conecction is alive at any point of time. You may assume that the socket connection is never closed from my side ie. the client's end, however it may be closed by the server at any time.

The only way to tell if the socket has been disconnected is to send data over it.
set the timeout on the server side socket and then have the client check in every so often within the timeout so if you set the client to check in every 10 seconds then set the timeout to say 30 seconds on the server socket.
if the server socket times out then you know the connection has been broken.

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

Printfab 2.0.4 and 10.4.8 (Client & Server)

Similar Messages

Maybe you are looking for