Printing Acrobat files with HP Color LaserJet 2605dtn
Often, but not every instance, when I print an Adobe Acrobat file on the HP Color LaserJet 2605dtn Printer the following happens: the text prints as expected but the entire text area (but not the margins) is painted over with an orange red. This happens whether there is a graphic image in addition to text in the documents or when there is text only. With other Acrobat files, the text and/or graphic prints without a problem. I would like to know how to fix this problem.
It's featured on the forums before. For some reason Acrobat 8 doesn't go well with HP colour laserjet printers. I've suffered the same.
Two ways round it. Which preset (if any) do you use in Distiller to process the PS file? The red effect only appears when you use certain pre-sets.
I usually solve the problem by opening the PDF in Acrobat 6, not 8, and then printing from that
Similar Messages
-
Can I batch print PDF files with Adobe Acrobat Reader X
can I batch print PDF files with Adobe Acrobat Reader X? I have tried from Windows Exploer (Windows XP) and it looks like the files are opening but they do not print.
PatVery strange! What is your installed Reader version?
Try disabling Protected Mode in Adobe Reader [Edit | Preferences | Security (Enhanced)]. -
Printing PDF files with smb/cups not possible // SLPReg status -20!
Hello *,
i am running SAMBA 3.6.1-1 and CUPS 1.5.0-1 on a dedicated system. Printer: Canon Pixma IP4500 (USB).
The problem is that all Windows 7 clients are not able to print PDF files (since few months) on that printer while printing these files with Linux software is no problem. The PDF files are neither encrypted nor forbidden to print.
I tried to print with Adobe Acrobat Reader X (latest) and Foxit Reader. Both are preparing the pages to be printed and close their printing dialog after processing. Windows printing queue does not show any jobs (which it even does not when printing simple images with MS Paint, which is not a problem).
Windows systems are using the Canon Inkjet 4500 and Canon iP 4500 driver (manually installed). Printing images works with both drivers.
I searched for "SLPReg […] failed with status -20!" but found no helpful information.
/var/log/cups/error_log
D [24/Dec/2011:23:05:35 +0100] Report: clients=0
D [24/Dec/2011:23:05:35 +0100] Report: jobs=499
D [24/Dec/2011:23:05:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:05:35 +0100] Report: printers=2
D [24/Dec/2011:23:05:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:05:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:05:36 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:05:36 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:05:36 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:05:48 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:05:48 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:07 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:07 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:19 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:19 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
D [24/Dec/2011:23:06:35 +0100] Report: clients=0
D [24/Dec/2011:23:06:35 +0100] Report: jobs=499
D [24/Dec/2011:23:06:35 +0100] Report: jobs-active=0
D [24/Dec/2011:23:06:35 +0100] Report: printers=2
D [24/Dec/2011:23:06:35 +0100] Report: printers-implicit=0
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-string-count=199735
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-alloc-bytes=14344
D [24/Dec/2011:23:06:35 +0100] Report: stringpool-total-bytes=3718136
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = 192.168.2.9:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "lo" = localhost:631
D [24/Dec/2011:23:06:38 +0100] cupsdNetIFUpdate: "eth0" = [v1.fe80::1e6f:65ff:fe51:1b3+eth0]:631
D [24/Dec/2011:23:06:38 +0100] send_slp_browse(0x7f7d52023050 = "IP4500")
E [24/Dec/2011:23:06:38 +0100] SLPReg of "IP4500" failed with status -20!
D [24/Dec/2011:23:06:50 +0100] send_slp_browse(0x7f7d52017c90 = "IP4500_Duplex")
E [24/Dec/2011:23:06:50 +0100] SLPReg of "IP4500_Duplex" failed with status -20!
/etc/samba/smb.conf
load printers = yes
printing = cups
printcap = cups
[printers]
path = /var/spool/samba
printable = yes
public = yes
writable = no
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 22:25
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer IP4500>
UUID urn:uuid:f9850f70-d898-39ad-4e0a-9edfecf4977b
Info Canon iP4500 series
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1306084752
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
DenyUser xy
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer IP4500_Duplex>
UUID urn:uuid:14fcd3ca-2118-380e-5033-79beb09bb3b7
Info Canon iP4500 series (Duplex)
Location Keller
MakeModel Canon PIXMA iP4500 - CUPS+Gutenprint v5.2.7
DeviceURI usb://Canon/iP4500%20series?serial=42E635
State Idle
StateTime 1324761079
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>Hi,
I can, unfortanetly, confirm this problem for me with a Brother HL-2030 and an HP Officejet 5600 series.
cups error log
D [03/May/2012:21:42:46 +0200] Report: printers=3
D [03/May/2012:21:42:46 +0200] Report: printers-implicit=0
D [03/May/2012:21:42:46 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:42:46 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:42:46 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:43:48 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:43:48 +0200] Report: clients=0
D [03/May/2012:21:43:48 +0200] Report: jobs=233
D [03/May/2012:21:43:48 +0200] Report: jobs-active=0
D [03/May/2012:21:43:48 +0200] Report: printers=3
D [03/May/2012:21:43:48 +0200] Report: printers-implicit=0
D [03/May/2012:21:43:48 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:43:48 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:43:48 +0200] Report: stringpool-total-bytes=192536
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = 192.168.2.100:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "tun0" = 10.8.0.1:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "lo" = localhost:631
D [03/May/2012:21:44:50 +0200] cupsdNetIFUpdate: "eth0" = [v1.fe80::201:2eff:fe27:6993+eth0]:631
D [03/May/2012:21:44:50 +0200] Report: clients=0
D [03/May/2012:21:44:50 +0200] Report: jobs=233
D [03/May/2012:21:44:50 +0200] Report: jobs-active=0
D [03/May/2012:21:44:50 +0200] Report: printers=3
D [03/May/2012:21:44:50 +0200] Report: printers-implicit=0
D [03/May/2012:21:44:50 +0200] Report: stringpool-string-count=10577
D [03/May/2012:21:44:50 +0200] Report: stringpool-alloc-bytes=13088
D [03/May/2012:21:44:50 +0200] Report: stringpool-total-bytes=192536
printers.conf
# Printer configuration file for CUPS v1.5.0
# Written by cupsd on 2011-12-24 13:14
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
<Printer CUPS-PDF>
UUID urn:uuid:ad99f5dd-2577-355f-759c-6b2941a88d34
Info Virtual PDF Printer
Location Zion
MakeModel Generic CUPS-PDF Printer
DeviceURI cups-pdf:/
State Idle
StateTime 1309396700
Type 8450124
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HL2030>
UUID urn:uuid:1b453a5d-ade0-3ddb-45e4-c5bcfe1feabd
Info Brother HL-2030 series
Location Zion
MakeModel Brother HL-2030 Foomatic/hl1250 (recommended)
DeviceURI usb://Brother/HL-2030%20series?serial=G6J274210
State Idle
StateTime 1324728260
Type 8433668
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer HP5600>
UUID urn:uuid:8d882659-3c7e-319f-5072-38d14683cfaf
Info HP Officejet 5600
Location
MakeModel HP Officejet 5600 Series, hpcups 3.11.10
DeviceURI hp:/usb/Officejet_5600_series?serial=CN838F31ZQ04B2
State Idle
StateTime 1324728896
Type 8425484
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
smb.conf
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# Set public = yes to allow user 'guest account' to print
guest ok = yes
writable = no
printable = yes
Did you find a solution in the meantime? -
Not printing acrobat files from Reader 9.4/Win 7 64 bit
I have just had to get replacement PC with Win7 64 bit and have loaded Acrobat Reader 9.4.(Prior to demise of old PC Win XP SP3 and Reader 9.x) I have an HP Deskjet 960c printer connected through a NAS as a network printer.
I have problems printing acrobat files PDFs (which used to print on old PC) to that configuration. I open document (displays fine), select print, press OK. Goes through spooling doc - 100%.; Then nothing happens - nothing shows on doc list on printer - JUST GETS LOST IN THE ETHER.
Same file prints on printer if direct USB connected.
Word/Excel files print both through NAS as server and on direct usb connect.
Still printes from another XP machine fine.
Tried XP compatibility no change
ONLY does not seem to work on printing PDFs via NAS Print Server.
Help appreciated
as1440Ok, I have now gotten Reader 10 installed, can open files from my desktop but IE 9 keeps crashing when I try to open PDF files even though I exited and relaunched IE 9. I did take ownership of all the folders containing Reader 10 and then clicked OK when I got the error notice about the shortcut being installed. I did make a copy of the crash error report and it reads as follows:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 9.0.8112.16421
Application Timestamp: 4d76255d
Fault Module Name: IEFRAME.dll
Fault Module Version: 9.0.8112.16440
Fault Module Timestamp: 4eb319a7
Exception Code: c0000005
Exception Offset: 001b174b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
Any help is greatly appreciated! -
How to print from iphone to hp color laserjet CM1017 MFP printer
How to print from iphone to hp color laserjet CM1017 MFP printer
In order to AirPrint from your iPad/iPhone, here's all you need to do:
1. Make sure the printer and iPad/iPhone are connected to the same local network.
2. Open something you want to print (on the iPad/iPhone).
3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
4. Tap "Print".
If you have any issues with printing, below are some steps that should help you out!
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
How can I print a file with mixed page orientation in windows 8.1?
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pcส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
My illustrator CS6 crashes when i try to open an AI file with RGB color mode
My illustrator CS6 crashes when i try to open an AI file with RGB color mode. I worked on this file yesterday and changed it to RGB mode. Today i tried to open the file again but illustrator won't open it and crashes. It does work when i want to open a file with CMYK color mode.
Anyone know how to fix this ?Have you tried trashing the prefs?
-
Cannot print PDF file with version 11.0.10 Adobe Reader.
Cannot print PDF file with version 11.0.10 Adobe Reader. Get error messages "This document could not be printed" and "There are no pages selected to print". I am using a Mac OS Ver 10.0.2. I see that this question has been asked by others recently, but no answers. Anyone have any suggestions?
Assuming you are running 10.10.2 and not the ancient 10.0.2, can you tell us what printer and printer driver you are using? How is the printer connected to the computer (network, usb)? See if you can delete the Reader preference files? Years ago I resetting the printer subsystem would sometimes cure a problem like this.
-
Can not print pdf file with firefox 29.0 pdf preview plugin. Why?
Can not print pdf file with firefox 29.0 pdf preview plugin. Why?
Control V doesn't work here for a screenshot.
-
Trouble opening acrobate files with reader 10.1.7.
I have trouble opening acrobate files with reader 10.1.7. When I click on the file to open it with adobe reader x, nothing happens. If I click on Adobe Reader X icon, a message comes up: preparing to install. After that, I can open a PDF, but only until the next reboot.
Something went amiss during the install. Windows keeps trying to finish the incomplete install every time Reader opens.
Use the Adobe Cleaner to completely remove Reader.
Download the offline installer and reinstall without a download manager -
How to print a plot with two colors Without using two plots
Hello everybody,
Escuse my English (poor Frenchies....)
I'm working with VB6 and I will need to print a plot with two colors (Some values greater than a trigger for example, ...)
I was looking for some help to discover if that thing is possible without using another plot, this is what I'm already doing, and it do not satisfy me (and my boss....)..
Thank for your Help.
JulienHi Julien,
I have found on the different link to make that you want.
This first link is on National Instrument site, the first is general, and second provided information about : How Can I Programmatically Print Out a ComponentWorks Graph Object?.
http://digital.ni.com/public.nsf/websearch/81D87CB2A5BF6C11862569E4008240FE?OpenDocument
http://digital.ni.com/public.nsf/websearch/dc3430165bc916c586256317006f8cc9
Links below are on the web, and explain how do you can print a graph on Visual Basic. (the first is French link )
http://khany.developpez.com/tutoriel/mschart/
http://www.programmersheaven.com/zone1/cat378/18546.htm
Regards,
Message Edité par Christophe S. le 12-27-2005 01:51 PM
Christophe S.
FSE East of France І Certified LabVIEW Associate Developer І National Instruments France -
Printing problem with HP Color Laserjet 3000 printer
I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al MamunHi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi. -
Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks
Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
I'm having this problem on both my iMac and my MacBook Pro.
I get errors like:
"unable to write pirnt data broken pipe"
"unable to send data to printer"
"printer not connected"
I've been reading responses to others with similiar issues and I've tried
deleting and re-adding my printer.
reseting my printing system
Installing Guenprint.
re-adding my pirnter with a generic PCL driver.
None seem to correct the problem.
This problem happens both when connected directoy with USB and when connected through the network.
I have no problem printing with my work (Wondows) laptop.
Any help would be appreciated.Thanks, a brody.
Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
I thought the issue may have been resolved.
I was finally able to print my bank statement on both the iMac and MacBook.
Today, I'm back to the the same issues.
Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
In my mind, it's pointing more and more towards a hardware issue. -
Problem to print with HP Color LaserJet CP3525 (PCL 6) on Server
Hi,
I have a printer HP Color LaserJet CP3525 in a server, and I installed with the correct drivers for that but the printing output is strange. I'm trying to print in A4 paper, and everything is just printed in 1/4 of the page. The most strange is that the graphics are scaled to the 1/4 of the page while the text is exactly with the same size than the complete page, but all the letter are overlapping each other.
I also tried to print with a generic configuration and print in all the page but I can't print with color, just the black toner is used, so the quality is really bad.
Please, help me!This sounds like a driver issue. You mention the printer being PCL6. Can you confirm which driver you are using when the 1/4 page prints occur. My guess is that it would be one of the Gutenprint drivers included with SL and this sort of output can occur when the printer driver is not supported by the printer.
Also, with regards to the Generic, which I assume is the Generic PCL Laser Printer driver included with SL, this by default is set to 300dpi. You can change this print quality setting to 600dpi, which will improve your output, especially the graphics. However this driver only supports black & white printing. So if you want to print in color from the Mac and the printer does not support PostScript, then you should look at installing the pxlmono package.
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o
Note that you will need the pxlmono, Foomatic and Ghostscript packages to use this driver suite. -
Printing Issues With HP Color Laserjet CP5520
In my office HP Color Laserjet CP5520 is installed. It is attached with network. Some of the user cannot send a print and some user can send print. IP is fixed for printer. Can anyone help me.
can anyone solve this problem
Maybe you are looking for
-
Early 08 iMac not booting - You Need to Restart Message
So after lunch today, I touched the shift key to wake up my iMac from sleeping. Screen came up, but it was totally frozen with distorted green digital "crud" in various places in the display. (no other way I know to describe the green stuff, it wasn'
-
Problem to give default value in entity object using query
hi, i have one entity object and i want to set default value of attribute like division which is based on employee code. entity object based on table leavedetail and using refrence table employee_hdr(empcode ,division). so how can i set default value
-
Using iMessage with iPods/iPads and SMS with iPhones
I prefer using SMSs to text other people with iPhones but I still want to use iMessage to chat with people who own an iPad and an iPod. What do I do? I don't want to desactivate iMessage.
-
Installed 10.4.8 (PPC) - now my Apple DVD won't work
After installing the 10.4.8 update on my G4 laptop my Apple DVD Player app won't work, saying "A valid DVD drive could not be found [-70012]? What happend and how do I fix it?
-
Hi All, How to know report name through Function pool. Example I have function pool name want to know report name. Regards Arif