Printing Barcodes using ABAP

Hi Abapers,
I Want to Print Barcode using ABAP Write statement. Is it Possible?
Please suggest me.
Thanks,
Kishore

Printing Barcodes with ABAP or SAPSCRIPT
hope u will get some idea.
We are now ready to print barcodes using an ABAP report program or a SAPSCRIPT form. In these examples we are using Code 39 barcodes which require very little formatting (all we have to do is add asterisks before and after the data).
Sample ABAP Program:
DATA: BAR_CODE1(16) VALUE `ABC01230123A01'
NEW-PAGE PRINT ON IMMEDIATELY `X'.
FORMAT COLOR OFF INTENSIFIED OFF.
If the barcode is the first element on the page, the following Write
statement is needed (otherwise you get a date in the first print
control.
WRITE:/
Turn on the barcode font, print the data, and switch back to the
printer's default font. Be sure to use NO-GAP to avoid unwanted
characters or CR/LF.
PRINT-CONTROL FUNCTION `BCPFX'
WRITE: BAR_CODE1 NO-GAP
PRINT-CONTROL FUNCTION `BCSFX'
Add a Write statement to prevent insertion of CR/LF into the barcode.
WRITE:/

Similar Messages

How to print Barcode using SAPscript?

hello, everyone.
I have some questions.
now, I have to print some doc. that described by barcode in sapscript form.
so, try to test in t-code so10
input value SAPSCRIP-BARCODETEST, ST, EN.
and click 'print-preview'
result is correctly output in pint privew.
but when I print dis priviewed doc. disappeared barcode image.
is this O.K??
I have to do something?? (Add DLL file, barcode font or etc....)
I don't know how to print barcode using SAPScript. anybody solve this problem.please.
p.s this system is SAP ECC 6.0 only ABAP.
printer setting is front-end print.

hello, everyone.
I have some questions.
now, I have to print some doc. that described by barcode in sapscript form.
so, try to test in t-code so10
input value SAPSCRIP-BARCODETEST, ST, EN.
and click 'print-preview'
result is correctly output in pint privew.
but when I print dis priviewed doc. disappeared barcode image.
is this O.K??
I have to do something?? (Add DLL file, barcode font or etc....)
I don't know how to print barcode using SAPScript. anybody solve this problem.please.
p.s this system is SAP ECC 6.0 only ABAP.
printer setting is front-end print.

Urgent!! Printing Barcode using smartforms

req: need to print barcode using smartforms.
【Settings】
The following settings are made already
1. Style ( paragraph, character type(Syatem Barcode ) )is created and activated (T-code:Smartforms)
2. In the smartform I used the above style to print barcode .
※TEXTTYPE = TEXT ELEMENT.
【Execution】
1. I run the smartform in test mode with setting any print parameters
2. Trigger print preview
【Problem】
1. I am getting only BAR's no barcodes.
The bracodes are not displayed properly.
If I test the same system barcode in SE73 it displayed properly.
Is there anyother settings are necessory?
Plz help me in solving the peoblem

Hi
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Detailed information about SAP Barcodes
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Reward points for useful Answers
Regards
Anji

Printing barcode from ABAP program

Hi,
Is it possible to print barcode (using zebra barcode printing) from ABAP program directly without using Smart Form, SAP Script or Adobe PDF Form.
I have the barcode instructions, I just want to output it to the barcode printer directly.
Sample instructions to be output to barcode printer:
FT128,288XG005.GRF,1,1^FS
FT96,128XG000.GRF,1,1^FS
FT64,192XG001.GRF,1,1^FS
FT0,288XG002.GRF,1,1^FS
FT0,224XG003.GRF,1,1^FS
FT128,256XG004.GRF,1,1^FS
FO16,180GB496,0,5^FS
FO52,37GB450,66,4^FS
BY4,3,40FT86,320^BCN,,Y,N
FD>;123456>67FS
PQ1,0,1,YXZ
XAID000.GRFFSXZ
Thanks in advance.

Hello,
Yes we can do it..
Go through this link you will some idea
http://sapprograms.blogspot.com/2008/11/barcode-printing.html
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm

How to bypass printer setting using abap code?

Dear All,
I want to bypass printer setting using abap code?
I am printing sticker using a code and i dont want to display printer setting .
I want direct ouput ?
Regards
Steve

Are you using reports or scripts/smart forms? You can use the parameter for no_dialog = space(use the relevant parameter).

Printing Barcode using DI API

Hello Gurus,
I want to create an Addon which can print a barcode using UI and DI API. Can this be possible? I will not use the Print Layout design. Please help..

Hi Gilbert,
You can send the XML through a middleware application like Loftware to most printer types. More info avail. at www.loftware.com or e-mail me [email protected]
Thanks,
Joel

Printing barcode using oracle graphics

Hello Folks,
I am trying to create bar codes using reports & graphics. The
report documentation (chapter 06) does have guidance but which
is not clear on the graphics side.
Is some one can elaborate little more on this?
Regards.
null

Spencer is correct...
but, watch out for the DEVICE you are reading the
bar code with...the wand, bar gun...etc.
what we had to do ( my team )
was to put and "*" before the bar code
and a "*" after the bar code for our gun to read
the code...then is worked...
patrick
from the 3of8.ttf
go to the control panel
find FONTS and click on it
once the program displays all your FONTS
click on the menu FILE and then click on
INSTALL. this will ask you where the 3of9.tff is located
..find the location,
then install.
in your oracle report,
click on the FONT to install 3of9...blah..blah
good luck
Spencer Tabbert (guest) wrote:
: Its really quite simple to print barcodes. Essentially a
: barcode is no more then a different font which needs to be
: installed on your pc. Dev 6.0 does ship a sample barcode font
: which you can install if you would like. Do a search for the
: font named 3of9.ttf then copy this file into your fonts folder
: which is located in your control panel. When wanting to print
: the barcode out just change the font type for a particular item
: on your report to the barcode font.
: Spencer Tabbert
: mjs (guest) wrote:
: : Hello Folks,
: : I am trying to create bar codes using reports & graphics.
The
: : report documentation (chapter 06) does have guidance but
which
: : is not clear on the graphics side.
: : Is some one can elaborate little more on this?
: : Regards.
null

Screen shot / Print screen using ABAP

hi all,
     I want to take screen shot of any SAP screen using ABAP code.
     In every SAP screen through 'Help' menu there is a option to create support desk message.
     If the user clicks on 'Create Support Message' through 'Help' menu in any SAP screen, that
particular screen shoud be captured and add as an attachment to the mail and send it.
Thanks in advance.

Hi,
I think there is no any such FM or functionality you can done with ABAP, but i hope you can try using some external screen capture application and call that from ABAP to capture screen.
See EXECUTE Method of class CL_GUI_FRONTEND_SERVICES which may help you.
try this link
it suits your requirement
http://web.mit.edu/ist/org/admincomputing/dev/qa_backup.shtml
Edited by: guest on Jan 27, 2009 7:36 AM

How to print BARCODE in DATAMAX Printer using SAP Script?

Hi,
Can anybody guide me how to print BARCODE using DATAMAX Printer?
I need to develop a SAP Script, through which i need to print the BARCODE.
Pls. let me know the parameters for Script and how to print using print program.....
Regards,
Hemant

make one form in sapscript with one main window: like this
/E           ETIKETT
/*           Format = '57x19', Printer = 'Bradyprinter Model 1344'
/           ~f350
/           ~n
/           ~M0500
/           ~O0220
/           ~SG
/           ~s
/           ~c0000
/           ~e
/           ^D
/           ~L
/           D11
/           H20
/           PC
/           pC
/           SC
/           A2
/           1911A1200400005&knmt-kdmat&
/           1911A0800300005&knmt-postx&
/           1911A0800100005VS-Nr   :         &KNMT-MATNR&
/           1911A0800000005Datum   :         &date&
/           Q0001
/           E
in this script   &mseg-matnr&    and    &mseg-charg&    are 2D Barcodes
/E           ETIKETT
/*           Format = '57x19', Printer = 'Bradyprinter Model 1344'
/           ~f350
/           ~n
/           ~M0500
/           ~O0220
/           ~SG
/           ~s
/           ~c0000
/           ~e
/           ^D
/           ~L
/           D11
/           H20
/           PC
/           pC
/           SC
/           A2
/           1Wc99000001400082000012012&mseg-matnr&
/           ySPM
/           1911A1000380055&mseg-matnr&
/           1Wc99000001501702000012012&mseg-charg&
/           1911A0800260055&mkpf-budat&
/           1911A0800140055&mseg-mblnr&
/           1911A0600020008&makt-maktx&
/           Q0001
/           E
then you need your own printprogram and everything is fine. with open_form ; start_form ; write_form; end_form
you can communicate direct with the Datamax Programming Language from SAPScript to the Barcode printer.
i also have the datamax programmers manual as pdf if you want i could send it to you. let me know by PM.
also have look into HW 490295 the bartender Solution works fine for me to create the SO10 text's
greetz
tony
Edited by: Tony Wienhold on Jul 17, 2009 4:37 PM

How to print barcodes in Adobe forms

Hi All,
I am new to Adobe forms, Please help me how to print barcodes in ABAP using Adobe forms.
Thanks in advance.
Regards,
Satya.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Aug 26, 2011 4:17 PM

Hi Vanessa,
maybe this blog helps for the tables:
[Adobe Forms Using: Nested Table, Text Module & providing the functionality of Page Total & Grand Total|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0583594050DB11063248235171113529End?blog=/pub/wlg/11236]
and for the barcodes I found this:
[Introduction to barcodes in SAP Interactive Forms by Adobe|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0583594050DB11063248235171113529End?blog=/pub/wlg/13061]
I hope this provides some help for you.
If you are not able to fulfill your task, it is a good idea to check the blogs, wikis and download areas here in SAP Community Network - usually the quality is some quantum leaps better than current ABAP, General.
Regards,
Clemens

Sapscript print barcode problem.

hi everyone . i have troble about printing barcode using sapscript.
now i have program sapscript program name is "ZRABARC01"
and this program call sapscript = "ZAA_BARCODE" (you will see code at below of this message)
this program work well.
i want to create new programm "ZRABARC01_TEST"
(i use se38 for copy program from ZRABARC01)
and this new program will call sapscipt "ZAA_BARCODE_TEST"
(i use se71 to copy from ZAA_BARCODE)
sapscript is active
the problem is when i execute program ZRABARC01_TEST to call sapscript ZAA_BARCODE_TEST
it's will show button print barcode
after press button . it's will show print preview button.
when i press print preview button .
it's show error like this.
error message
There is no valid form
Message no. AB 061
Diagnosis
During the printing of barcodes,
the system could not find a valid form. Either no form was selected,
or the form selected is not active.
System Response
The print procedure terminates.
Procedure
Use a valid form. You can either use the sample supplied by SAP,
or modify it to your requirements. You maintain forms using the "form painter" (SE71) transaction.
and after that i press print button again.
there is error
ABAP runtime errors    LOOP_WITHIN_LOOP
what should i do to use program ZRABARC01_test call sapscript ZAA_BARCODE_test
and i wonder why when i use program ZRABARC01_test and call sapscript
ZAA_BARCODE it's show same error.
please help me.
program code
pa_form = 'ZAA_BARCODE'
LOOP.
    AT FIRST.
     Formular ๖ffnen
      CALL FUNCTION 'FIAA_BARCODE_OPEN'
           EXPORTING
                i_form = pa_form.
    ENDAT.
Zurckholen der Struktur ANLAV.
    anlav = anlav_str.
Insert 03/11/2004 OaK
    WRITE anlav-anln1 TO t-anln1 NO-ZERO.
    l1 = strlen( t-anln1 ).
    CASE l1.
      WHEN '1'.
        CONCATENATE '000000000000' t-anln1 INTO t-anln1.
      WHEN '2'.
        CONCATENATE '00000000000' t-anln1 INTO t-anln1.
      WHEN '3'.
        CONCATENATE '0000000000'   t-anln1 INTO t-anln1.
      WHEN '4'.
        CONCATENATE '000000000'    t-anln1 INTO t-anln1.
      WHEN '5'.
        CONCATENATE '00000000'     t-anln1 INTO t-anln1.
      WHEN '6'.
        CONCATENATE '0000000'      t-anln1 INTO t-anln1.
      WHEN '7'.
        CONCATENATE '000000'       t-anln1 INTO t-anln1.
      WHEN '8'.
        CONCATENATE '00000'        t-anln1 INTO t-anln1.
      WHEN '9'.
        CONCATENATE '0000'         t-anln1 INTO t-anln1.
      WHEN '10'.
        CONCATENATE '000'          t-anln1 INTO t-anln1.
      WHEN '11'.
        CONCATENATE '00'           t-anln1 INTO t-anln1.
      WHEN '12'.
        CONCATENATE '0'            t-anln1 INTO t-anln1.
    ENDCASE.
*End of insert 03/11/2004 OaK
*Insert for Barcode printing 26/01/04
   UNPACK anlav-anln1 TO t-anln1.
    IF anlav-anln1+0(2) = '00'.
      MOVE anlav-anln21(3) TO t-anln10(3).
    ENDIF.
    APPEND t.
*End of insert.
    CALL FUNCTION 'Z_AA_BARCODE_PRINT'
         EXPORTING
              i_anlav = anlav
              i_form = pa_form
         TABLES
              i_t     = t.
    CALL FUNCTION 'END_FORM'.
    CALL FUNCTION 'START_FORM'
         EXPORTING
              form   = pa_form
         EXCEPTIONS
              OTHERS = 8.
    AT LAST .
     Formular schliessen
      CALL FUNCTION 'FIAA_BARCODE_CLOSE'
           EXPORTING
                i_form = pa_form.
    ENDAT.
ENDLOOP.
ENDFORM.
Edited by: dittaporn nanasilp on Nov 17, 2009 11:55 AM

hi,
I am unable to read your post, check it once.
rgds

Printing barcodes on 10g server running on Solaris OS

Hi,
We are using Reports 10g (10.1.2) on Solaris Operating System (SPARC 32-bit).
We wanted to print barcodes using Java bean method. It prints fine in windows, but giving below error when run on web using rwservlet. Actually we are using virtual display using xvfb.
My question is: Do we need to have physical display by setting up another machine like in 6i ?
Can we achieve the rendering of barcode image using virtual display ?
What are the setup steps needs to be followed if rendering is possible with out using physical display ??
Thanks somuch!!!
The ERROR is:
REP-108: MSG-00100: < No Exception Message >
MSG-00100:
java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:121)
MSG-00100: java.awt.Window.<init>(Window.java:274)
MSG-00100: java.awt.Frame.<init>(Frame.java:401)
MSG-00100: java.awt.Frame.<init>(Frame.java:366)
MSG-00100: oracle.apps.barcode.BarCodeMaker.renderBarCode(BarCodeMaker.java:84)
MSG-00100: oracle.reports.engine.EngineImpl.CRunReport(Native Method)
MSG-00100: oracle.reports.engine.EngineImpl.run(EngineImpl.java:437)
MSG-00100:
oracle.reports.engine._EngineClassImplBase._invoke(_EngineClassImplBase.java:90)
MSG-00100:
com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
MSG-00100: com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
MSG-00100:
com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81
MSG-00100:
com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:10
6)
REP-0108: File '/tmp/srw002114024' not found.

Thanks Sooooomuch!!!!!!
we are running Xvfb located at /usr/openwin/bin/
In particular, we are starting the Xvfb server with the following command:
nohup Xvfb :1 -screen 0 1600x1200x32 &
We are then setting the DISPLAY on the command line and in the reports.sh
script using: DISPLAY=10.25.3.123:0.0; export DISPLAY
We verify that it recognizes the display using "xset -q"
In reports.sh file We entered below line:
## REPORTS_DEFAULT_DISPLAY=NO; export REPORTS_DEFAULT_DISPLAY
DISPLAY=10.25.3.123:0.0; export DISPLAY
But still we are getting java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:121)
MSG-00100: java.awt.Window.<init>(Window.java:274) Errors.
Is there anything wrong in the above setup ?
Please advice.
Thanks Soomuch,
Ram.

Barcode using sapscript

Hi,
I am able to print barcode using laser printer. Does it mean that the RF gun will be able to read it?

Hi Pankaj,
Barcode is a special type of marking to identify the item and its price.
and this is a special marking which is basically used to read the Barcode Reader only.
We cannot or any other item will not be able to read the barcode. Only Barcode reader can only read.
Thanks,
Chidanand

Interactive form using ABAP workbench

Hi All,
I have develped Print forms using ABAP workbench using SFP transaction.
I am really confused with the terms Print forms and Interactive forms..
Actually I was able to make my Print form which I have created using SFP transaction, Interactive by giving the appropriate form parameter(fillable).
But I have read some SDN article in which it says that Interactive forms can only be created in Webdynpro environment.. (Either ABAP webdynpro or Java Webdynpro)..
In the design time how we will know that the form is interactive or not?
Please let me know ur thoughts on this..
Regards,
Sreejith A P

HI Sree jith,
At Design Time, we design a form using the Adobe Designer tool, which allows to to create forms with input fields etc, which can be filled by the user, if the runtime supports it.
When you design a form via transaction SFP,y ou are essentially designing the form and adding the elements, but, whether the form would be interective or not would be defined by the run time environment.
If you add an input field to the form, and execute it via an ABAP report, then the form would not be inteactive but, if you use the same form in WebDynpro, then the form could be interactive.
Designing the form via SFP or via the WebDynpro Interactive form element, both, inherently call the Adobe Designer, but executing the form via WebDynpro Environment would supoprt its interactove nature whereas via an ABAP report, it would not, although the tool allowed you to add the UI element.
Hope this helps,
Regards,
Siddhartha

Printing barcode EAN 128

Hello.
I need print barcode using EAN128. I saw that for EAN128 exist barcode BC_EANH. When I use it on print preview I have barcode but when I print it I got number but not barcode (laser printer, pdf printer)
Should I print that barcode on barcode printer? or I should use another barcode
Thanks in advance,
Edward

Hello,
Perhaps this webservice is useful for you; http://www.gs1-label.com
You can use the public account to try the O2L WEBservices demo:
e-mail address; anonymous(at)t2s.nl - password; o2lweb
The label generated in PDF, easy to print on a 'normal' printer, is certified by GS1.
Please note that this is an example, the webservice supports other barcode symbologies as well and labels can also be generated as ZPL (Zebra label printer).
O2L WEBservices exposes its technology by through web standards (SOA). Implementing the services is therefore easy and quick. A hands-on example of O2L WEBservices working in combination with SAP NetWeaver Visual Composer is available.
Best regards,
Judith de Witte

Printing Barcodes using ABAP

Similar Messages

Maybe you are looking for