Printing certain pages in a report

Hi all,
I want to know how can i make the ABAP report to print certain pages in a report.
Say, my abap report has 3 pages. The second page is blank. How can i code it so the printing skip the second page and continue to the third page?
Additional Info: When user click the print button, it starts printing. When it reach the second empty page, it should be skip and resume printing the third page.
Thanks
William Wilstroth
Message was edited by:
william wilstroth

i had found solution to this problem. You should use GET_PRINT_PARAMETER and NEW-PAGE PRINT ON/OFF.

Similar Messages

Printing Blank pages for SSRS Reports in Firefox browser

I have created an SSRS Report that works well on chrome, but when I use the site in Firefox the SSRS Page prints blank pages though the report displays properly. I have tried every thing like reducing table width. I am using the report viewer control.
Sanjeev Menon

Hi Sanjeev,
Generally, if the report display properly in the browser, it should be also work well when we print the report. And I can’t reproduce the scenario in my own environment. As to this issue, I recommend that you can try to run it in compatibility mode or use
IE explorer to print the report.
If this issue still exists, please try to update the report viewer control to latest release and check this issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can I print some pages from multipage report

Hello,
I have created a multipage report in word. I would like the user to be able to print the pages selected (as in word printing: pages: 1, 2-3);
I am using Office 2007 pro, the LabVIEW Report Gen Toolkit, LabVIEW 2009, and Windows XP.
I used the suggestion in thread:
http://forums.ni.com/t5/LabVIEW/How-can-you-print-a-single-page-of-a-multipage-report/m-p/155233 , modifying the print VI that comes shipped with LabVIEW: NI_ReportGenerationToolkit.lvlib:Word_Print.VI.
first of all I put two integer constants on "From" and "To" in the Invoke node (PrintOut), but Labview return an error:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi -> print2.vi
Then I searched for PrintOut Method in word 2007 Reference guide, and I saw that for using From and To the Range field must have the string wdPrintFromTo;
I insert wdPrintFromTo string in RANGE Field and tryed.... same error......
After that I change approach; removed all constants and used the field Pages; I put a string "1-2" connected to this field and now the printer respond, but all pages was printed!
What's wrong?
many thanks
Attachments:
print2.vi ‏18 KB
parte comune.doc ‏43 KB

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

How to not print a page of a report under a condition

Hi,
I need to build a report with a specific layoutdepending on a user paramater.
Ex:
If parameter value is 1, then display the layout of the first page of the report
If parameter value is p_layout2, then display the layout of the second page of the report
If parameter value is p_layout3, then display the layout of the third page of the report
If parameter value is p_layout4, then display the layout of the fourth page of the report
So I built a report, putting on page 1 the first layout, page 2 the second etc.
I put each layout into a frame, with FormatTrigger as of: IF :paramater IS 'p_layoutx' THEN TRUE ELSE FALSE.
The output prints only the frame needed (the one attached to the value passed by the parameter) BUT prints blank pages for all others (the 3 remaining ones).
So, how would I do to make the report NOT to print these blank pages, having only one page printing, the one that matches the condition?
Thank you in advance.

I found a way to achieve my goal: Instead of creating a frame with formattrigger for each of my layouts and inserting in it all my objects (text fields and graphics), I don't create any frame, put all my objects on the desired pages and put the formattrigger conditions on these objects with vertical elasticity for all of them. When not the condition is not met, then all objects are shrinked. It is weird that the behavior is not the same with a frame (the frame with vertical elasticity should "shrink" itself; or maybe I missed something).

I cannot print certain pages from websites while in Firefox. I have checked my printer by printing the pages in IE and they work. Please help

I cannot print certain web pages while in Firefox. It is not a printer problem as I checked by printing the pages in IE and they print fine.
== URL of affected sites ==
http://

I have reset the selected printer in my Firefox preferences as described in the link that was sent from the-edmeister.
I am still having problems printing. All I see in the print preview is the address link on top of the page and that is all that prints.
I have tried using the print-selection also with no luck.
My printer works with any other application such as Word or Excel.
This all started after I updated Firefox to Ver. 3.6.3
Any other suggestions would be appreciated. Thanks

Printing blank pages in a report

Post Author: DavidH
CA Forum: General
We have a report that needs to throw a blank page for when a group changes. We got that and then needed to throw a page so that one group did not print on the reverse of another.
This works on our printer but when we put the same report on the clients printer they get a completely blank sheet of paper between each group.
I understand that Crystal 8.5 had an issue with reports being printed on different printers and wondered whether this is still the case.
We are using 9.0
Thanks David

Post Author: sleahcim
CA Forum: General
Hi David,
This article may be of some help: http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do;jsessionid=04EC563D5B1F5D551720C2FC8CD9242D?cmd=displayKC&docType=kc&externalId=c2005478&sliceId=&dialogID=14598434&stateId=1%200%2014600426
-Michael

PRINTING BLANK PAGE IN ORACLE REPORTS 6I

I am Printing statement on a double-sided stationary capable printer. To ensure that each new statement starts on a new physical paper, I need to add a blank page if the previous statement had an odd number of page size. How can I do that. Please Help.

First, thanks for your response, but ...
(1) I use this sentence in BeforeReport Trigger
srw.run_report('report=ANA13F blankpages=no');
and gives me the following error 'REP-1429:'beforereport':SRW.RUN_REPORT no puede ser llamado con lote=no' then I add a new parameter
srw.run_report('report=ANA13F batch=yes blankpages=no');
and then I get the following error 'REP-1428:'beforereport':Error al ejecutar SRW.RUN_REPORT'
(2) In this case it doesn´t work because I set the global variable in a format trigger for frame M_1, which is inside panel 2 (1 vertical panel x 2 horizontal panels per page). With this value I try to hide Image_1 and Field_1 that are in the margin for the same panel. The first time it has to hide these objects it works for M_1 because of return(false) in the trigger and set the variable to NO, so the next pages appear blank as I want, but the in the first one only hides M_1, not Image_1 or Field_1. It seems I have to put the var in other place, but I don´t know where because it refers a field in M_1.
Well, I don´t want to bother you, help as you can.
Thanks anyway.

Suppressing certain pages of a report

I need to build a large report that contains multiple reports (30 or so reports in all). I want the user to be able to select from a parameter form which reports the large report will contain. Is there a way to set a trigger for each page that depends on the values passed from the parameter form. Someone please tell me what kind of trigger to use and how it should be coded.
Thanks,
Tripp

I'm not sure I understand: "Is there a way to set a trigger for each page". This seems to imply that you have one report and you want to restrict values displayed in that report. To do this you would just add a user parameter and reference it in the query to restrict the values returned. You wouldn't restrict the values in the layout.
However, if you do mean that you have a large report will contain 30 or so individual "reports" in it. Then each of these "reports" will have an independant section in the layout which should be surrounded by a variable sized frame - say M_1, M_2,.. M_30. In your output, you only want say "M_5" to be printed.
To do this, you need to create a format trigger against: "M_1", "M_2", .. "M_30". You would then have a user parameter "p_report" which you would reference in the format trigger as something like - for M_5:
function M_5FormatTrigger return boolean is
begin
return (nvl(:p_report, 'none') = 'M_5');
end;
To print only M_5, pass p_report=M_5 ont he command line.
You probably already have something more friendly than 'M_5' as the input value for the parameter.
You should also look at restricting the data retrieved by each of the other "reports" in your large report. You can do this by adding a lexical parameter to each of the queries so that they return no rows unless they are required by the "report".

Only printing certain pages...

Good day,
I am running Adobe reader XI on Windows 8 system and update 11.0.06 (the progrma says this is the latest update).
When prinitng files it does not print all of them, Sometimes it prints only the first few pages and other times only a few of them. Other programs as printing all of them.
Please assist.
Kind regards

Hi Morllum
is it happening with all the files ?
Please go to file-> properties and let us know the Application and PDf producer.

PRINTING: Keynote will only print to a certain page # then stops

Just to get this out of the way: iWork '08/Keynote 4.0, Mac OS 10.4.10 and everything has been updated. I also looked for other strings relating but could not find any.
I have a few reports created in Keynote that will only print to a certain page. Each report prints the same page every time, but the page # differs for each report. For instance, one report will print to page 32 out of 64, another to 42 out of 70, etc...
Further, if I select the pages that were missing, they will not print at all.
I have tried different printers, networks and printers. Other programs (Word/Excel) will print in total.
Has anyone heard of this problem/have any advice?
Much thanks,
Matt

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Printing page numbers in report

hi,
I want to print the page numbers in report in a format
of PAGE 1 OF 10
   PAGE 2 OF 10....
can anybody help me in this
thanks in advance.
neha.

Hi Neha,
Similar question was posted earlier by someone..
It will help you.
       line-size 80
       line-count 65(1)
       no standard page heading.
data: imara type table of mara with header line.
selection-screen begin of block b1 with frame title text-001 .
parameters: p_check type c.
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
end-of-page.
perform end_of_page.
FORM GET_DATA
form get_data.
select * into corresponding fields of table imara
        from mara up to 315 rows.
endform.
FORM WRITE_REPORT
form write_report.
data: xpage(4) type c.
data: lines_left type i.
loop at imara.
    write:/ imara-matnr.
    at last.
      if sy-linno < 64.
        lines_left = ( sy-linct - sy-linno ) - 1.
          skip lines_left.
          sy-pagno = sy-pagno - 1.
      elseif sy-linno = 64.
      skip 1.
       sy-pagno = sy-pagno - 1.
      endif.
    endat.
endloop.
write sy-pagno to xpage left-justified.
do sy-pagno times.
    read line 65 of page sy-index.
    replace '****' with xpage into sy-lisel.
    modify current line.
enddo.
endform.
Form end_of_page
form end_of_page.
write:/32 'Test Program',
        at 62 'Page:', at 67 sy-pagno, 'of', '****'.
endform.
Regards,
Sailaja.

Certain pages won't print to a Xerox printer but will in print in MSIE

I have Firefox 3.6 on a 64bit win7 PC. When I print certain pages to my Xerox laser printer (for example http://www.dressmakingresearch.com/1930s_under_dress.htm as one of several examples) I get one page, then a blank page, then error PCL5 out of memory. Sounds like some process running amok, the printer has 128 MB and nothing on this page is that big. I can print this page from FF to a HP OfficeJet. I can print it to anything from MSIE. Other PCs printing this page from FF to the same printer have the problem. Some problem with how FF renders it to this one printer driver, but the driver itself is OK? I print with the standard shrink to fit option. What would you suggest I do next to diagnose and fix?
Looking on the page, the various images are in table cells that are narrower than the image. <TD width="100"><IMG width="150"...
If I use Firebug to change the 150 to 99, the page prints. Why would FF be forgiving of this for some printers but not others?

What app are you trying to print with? Not all printing apps will print documents and Pages might be looking for an AirPrint printer.

Printing a page in Microsoft Word

Hello,
Just got my Mackbook back from a crash and they loaded Leopard. Not sure if it's a Leopard thing or I'm losing it but I have a 14 page Word document that I only want to print certain pages from. No matter where I look, I can't seem to figure out where the option to print "To" and "From" went.
Can someone give me a heads up?
Thanks

It's the same in every application: File --> Print --> Pages: From xx to xx
If it's only Word you're having this issue with I suggest you post your question on Microsoft's own forums for their Mac products, as they would be more focused on the issue than an Apple forum:
http://www.officeformac.com/productforums

Need help ASAP! Can't print all pages to PDF!

I'm trying to print to PDF a 44-page document for client proofing in Indesign CS4. When selecting the print range I always click "All", and "Spreads".
Last week out of the blue it only printed to page 16, with the above settings. I don't have any sections or page numbers or anything that would cause it to not print certain pages.
There are no errors when it's generating the PDF, in fact it goes through the entire print dialogue box just fine; except the "finished" PDF will pop up early with only 16 of the pages, while the print dialogue box is still going. I have to go back afterwards and print range "17-44" to get it to print the rest, and even then it will only print to page 41, and I'll have to go again and print "42-44", so I end up with 3 documents.
It does it with multiple documents. It seems to be random, too, as today I was able to get it to print out a different document in it's entirety as I wasn't able to earlier.
What on earth could be going on? I haven't changed any settings since the problem appeared. Thanks for your help.

I think if there was a problem in the driver it would be obvious. You might want to try trashing the prefs before doing anything more drastic. See Replace Your Preferences
There are some scripts for doing imposition, but Print Booklet is the built-in choice. That said, unless your printer specifiacally told you to make spreads, or you are the printer yourself, DON'T DO IT. It is the printer's job to impose your file to fit his equipment and you'll just make more work for everyone, or even make your job impossible to print, if you try to do his job for him.

Simple Statement w/ subreport prints multiple pages

Hello all,
I have a CR 2008 migrated from older version (CRW 32 6,0,1,135 with VB6 driving the report) that is printing multiple pages when it should be only printing 1 page.
This report is a Statement that shows customer info and account balances. It has a subreport that typically prints 1 line of report data on each Statement. However, some customers can have 2 or 3 records printed in the subreport. And in the past this all worked fine - it printed 1 page for the Statement even if there were more than 1 record in the subreport.
After converting to CR 2008 (I did successfully implement SP1 then SP2 after a lot of confusion, then joined this forum - thanks much!) the Statement now prints multiple (identical) pages based on how many records are in the subreport data. I've played with it by testing with customers who had 3 records in the subreport and it generates 3 pages. I've tried modifying the Section control values like "Keep together" and others with no success. We are using VB.Net 2008 now to drive the report.
If anyone has any ideas or suggestions, I really would appreciate your input. I'm not an expert with CR by any means but I have developed about 40 or so reports over the years and have a decent working knowledge.
Thanks for anything you may be able to offer.
Chris

That's a big jump from CR 6 to 2008.
It may be easier to just rebuild your report from the beginning rather than trying to fix this one.
Typically most update a few versions at a time and the import portion of the code can handle the updating relatively the same version. Cr 2008 is now UNICODE and completely different file format.
Thank you
Don

Printing certain pages in a report

Similar Messages

Maybe you are looking for